spacepaste

Paste details

reply | raw

  1.  
  2. [00]
  4. Texas Instruments X-Loader 1.4.4ss (Aug 19 2010 - 02:49:27)
  5. Beagle xM Rev A
  6. Reading boot sector
  7. Loading u-boot.bin from mmc
  10. U-Boot 2010.03-dirty (Aug 20 2010 - 20:50:46)
  12. OMAP3630/3730-GP ES2.0, CPU-OPP2, L3-165MHz,
  13. OMAP3 Beagle board + LPDDR/NAND
  14. I2C: ready
  15. DRAM: 512 MB
  16. NAND: 0 MiB
  17. *** Warning - bad CRC or NAND, using default environment
  19. In: serial
  20. Out: serial
  21. Err: serial
  23. Probing for expansion boards, if none are connected you'll see a harmless I2C error.
  25. No EEPROM on expansion board
  26. Beagle xM Rev A
  27. Die ID #7c7600011ff00000015739eb08032012
  28. Hit any key to stop autoboot: 3 [08][08][08] 2 [08][08][08] 1 [08][08][08] 0
  29. mmc1 is available
  30. The user button is currently NOT pressed.
  31. reading boot.scr
  33. ** Unable to read "boot.scr" from mmc 1:1 **
  34. reading user.scr
  36. 755 bytes read
  37. Running bootscript from mmc ...
  38. ## Executing script at 80200000
  39. mmc1 is available
  40. reading ramdisk.gz
  42. 19960110 bytes read
  43. reading uImage
  45. 3190568 bytes read
  46. Booting from ramdisk ...
  47. ## Booting kernel from Legacy Image at 80200000 ...
  48. Image Name: Angstrom/2.6.32/beagleboard
  49. Image Type: ARM Linux Kernel Image (uncompressed)
  50. Data Size: 3190504 Bytes = 3 MB
  51. Load Address: 80008000
  52. Entry Point: 80008000
  53. Verifying Checksum ... OK
  54. Loading Kernel Image ... OK
  55. OK
  57. Starting kernel ...
  59. Uncompressing Linux................................................................................................................................................................................................................ done, booting the kernel.
  60. [ 0.000000] Linux version 2.6.32 (ubuntu@ip-10-204-115-71) (gcc version 4.3.3 (GCC) ) #3 PREEMPT Wed Aug 18 15:53:03 UTC 2010
  61. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
  62. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  63. [ 0.000000] Machine: OMAP3 Beagle Board
  64. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  65. [ 0.000000] OMAP3630/DM3730 ES1.0 (l2cache iva sgx neon isp 192mhz_clk )
  66. [ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
  67. [ 0.000000] Reserving 16777216 bytes SDRAM for VRAM
  68. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 117760
  69. [ 0.000000] Kernel command line: console=tty0 console=ttyS2,115200n8 mem=80M@0x80000000 mem=384M@0x88000000 mpurate=1000 buddy=none camera=lbcm3m1 vram=16M omapfb.vram=0:8M,1:4M,2:4M omapfb.mode=dvi:1024x768MR-16@60 omapdss.def_disp=dvi root=/dev/ram0 rw ramdisk_size=131072 initrd=0x88000000,128M rootfstype=ext2
  70. [ 0.000000] Beagle expansionboard: none
  71. [ 0.000000] Beagle cameraboard: lbcm3m1
  72. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  73. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  74. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  75. [ 0.000000] Memory: 80MB 384MB = 464MB total
  76. [ 0.000000] Memory: 316288KB available (5880K code, 671K data, 204K init, 0K highmem)
  77. [ 0.000000] Hierarchical RCU implementation.
  78. [ 0.000000] NR_IRQS:402
  79. [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz
  80. [ 0.000000] Reprogramming SDRC clock to 332000000 Hz
  81. [ 0.000000] GPMC revision 5.0
  82. [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
  83. [ 0.000000] Total of 96 interrupts on 1 active controller
  84. [ 0.000000] OMAP GPIO hardware version 2.5
  85. [ 0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz
  86. [ 0.000000] Console: colour dummy device 80x30
  87. [ 0.000000] console [tty0] enabled
  88. [ 0.000000] Calibrating delay loop... 501.02 BogoMIPS (lpj=1957888)
  89. [ 0.000000] Mount-cache hash table entries: 512
  90. [ 0.000000] CPU: Testing write buffer coherency: ok
  91. [ 0.000000] tmpfs: No value for mount option 'mode'
  92. [ 0.000000] devtmpfs: initialized
  93. [ 0.000000] regulator: core version 0.5
  94. [ 0.000000] NET: Registered protocol family 16
  95. [ 0.000000] Beagle cameraboard: registering i2c2 bus for lbcm3m1
  96. [ 0.000000] Found NAND on CS0
  97. [ 0.000000] Registering NAND on CS0
  98. [ 0.000000] Unable to get DVI reset GPIO
  99. [ 0.000000] omap_init_mbox: platform not supported
  100. [ 0.000000] Target VDD1 OPP = 4, VDD2 OPP = 2
  101. [ 63.172180] OMAP DMA hardware revision 5.0
  102. [ 63.178497] bio: create slab <bio-0> at 0
  103. [ 63.179779] SCSI subsystem initialized
  104. [ 63.181152] usbcore: registered new interface driver usbfs
  105. [ 63.181304] usbcore: registered new interface driver hub
  106. [ 63.181488] usbcore: registered new device driver usb
  107. [ 63.181884] i2c_omap i2c_omap.1: bus 1 rev4.0 at 2600 kHz
  108. [ 63.184570] twl4030: PIH (irq 7) chaining IRQs 368..375
  109. [ 63.184631] twl4030: power (irq 373) chaining IRQs 376..383
  110. [ 63.184906] twl4030: gpio (irq 368) chaining IRQs 384..401
  111. [ 63.186645] regulator: VUSB1V5: 1500 mV normal standby
  112. [ 63.186889] regulator: VUSB1V8: 1800 mV normal standby
  113. [ 63.187133] regulator: VUSB3V1: 3100 mV normal standby
  114. [ 63.190734] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
  115. [ 63.191162] regulator: VMMC1: 1850 <--> 3150 mV normal standby
  116. [ 63.191436] regulator: VDAC: 1800 mV normal standby
  117. [ 63.191680] regulator: VPLL2: 1800 mV normal standby
  118. [ 63.191955] regulator: VSIM: 1800 <--> 3000 mV normal standby
  119. [ 63.192321] regulator: VAUX3: 1800 mV normal standby
  120. [ 63.192657] regulator: VAUX4: 1800 mV normal standby
  121. [ 63.192840] i2c_omap i2c_omap.2: bus 2 rev4.0 at 400 kHz
  122. [ 63.200592] i2c_omap i2c_omap.3: bus 3 rev4.0 at 100 kHz
  123. [ 63.201782] Switching to clocksource 32k_counter
  124. [ 63.210754] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0
  125. [ 63.211090] musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
  126. [ 63.211120] musb_hdrc musb_hdrc: MUSB HDRC host driver
  127. [ 63.211273] musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1
  128. [ 63.211425] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  129. [ 63.211486] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  130. [ 63.211517] usb usb1: Product: MUSB HDRC host driver
  131. [ 63.211578] usb usb1: Manufacturer: Linux 2.6.32 musb-hcd
  132. [ 63.211608] usb usb1: SerialNumber: musb_hdrc
  133. [ 63.212249] hub 1-0:1.0: USB hub found
  134. [ 63.212310] hub 1-0:1.0: 1 port detected
  135. [ 63.213409] NET: Registered protocol family 2
  136. [ 63.213653] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  137. [ 63.214202] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  138. [ 63.214630] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
  139. [ 63.214843] TCP: Hash tables configured (established 16384 bind 16384)
  140. [ 63.214904] TCP reno registered
  141. [ 63.214935] UDP hash table entries: 256 (order: 0, 4096 bytes)
  142. [ 63.214996] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  143. [ 63.215240] NET: Registered protocol family 1
  144. [ 63.215698] RPC: Registered udp transport module.
  145. [ 63.215728] RPC: Registered tcp transport module.
  146. [ 63.215759] RPC: Registered tcp NFSv4.1 backchannel transport module.
  147. [ 63.216064] Trying to unpack rootfs image as initramfs...
  148. [ 63.218963] rootfs image is not initramfs (no cpio magic); looks like an initrd
  149. [ 63.785247] Freeing initrd memory: 131072K
  150. [ 63.786071] omap-iommu omap-iommu.0: isp registered
  151. [ 63.787994] VFS: Disk quotas dquot_6.5.2
  152. [ 63.788146] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  153. [ 63.789245] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  154. [ 63.790100] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
  155. [ 63.790924] msgmni has been set to 874
  156. [ 63.794677] alg: No test for stdrng (krng)
  157. [ 63.794982] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
  158. [ 63.795043] io scheduler noop registered
  159. [ 63.795074] io scheduler deadline registered
  160. [ 63.795227] io scheduler cfq registered (default)
  161. [ 63.858306] OMAP DSS rev 2.0
  162. [ 63.858398] OMAP DISPC rev 3.0
  163. [ 63.858459] OMAP VENC rev 2
  164. [ 63.858734] OMAP DSI rev 1.0
  165. [ 64.195190] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  166. [ 64.213165] serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654
  167. [ 64.230499] serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654
  168. [ 64.247772] serial8250.2: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654
  169. [ 64.847778] console [ttyS2] enabled
  170. [ 64.858062] brd: module loaded
  171. [ 64.864471] loop: module loaded
  172. [ 64.868774] omap2-nand driver initializing
  173. [ 64.873199] No NAND device found!!!
  174. [ 64.876922] No NAND device found!!!
  175. [ 64.881439] usbcore: registered new interface driver catc
  176. [ 64.886962] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver
  177. [ 64.893066] usbcore: registered new interface driver kaweth
  178. [ 64.898712] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
  179. [ 64.906372] usbcore: registered new interface driver pegasus
  180. [ 64.912109] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
  181. [ 64.919128] usbcore: registered new interface driver rtl8150
  182. [ 64.924957] usbcore: registered new interface driver asix
  183. [ 64.930511] usbcore: registered new interface driver cdc_ether
  184. [ 64.936492] usbcore: registered new interface driver dm9601
  185. [ 64.942199] usbcore: registered new interface driver smsc95xx
  186. [ 64.948089] usbcore: registered new interface driver gl620a
  187. [ 64.953826] usbcore: registered new interface driver net1080
  188. [ 64.959625] usbcore: registered new interface driver plusb
  189. [ 64.965270] usbcore: registered new interface driver rndis_host
  190. [ 64.971343] usbcore: registered new interface driver cdc_subset
  191. [ 64.977416] usbcore: registered new interface driver zaurus
  192. [ 64.983154] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  193. [ 64.991302] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  194. [ 64.998138] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
  195. [ 65.004211] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 2
  196. [ 65.011871] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
  197. [ 65.030059] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
  198. [ 65.035980] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  199. [ 65.042877] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  200. [ 65.050201] usb usb2: Product: OMAP-EHCI Host Controller
  201. [ 65.055603] usb usb2: Manufacturer: Linux 2.6.32 ehci_hcd
  202. [ 65.061065] usb usb2: SerialNumber: ehci-omap.0
  203. [ 65.066314] hub 2-0:1.0: USB hub found
  204. [ 65.070190] hub 2-0:1.0: 3 ports detected
  205. [ 65.100463] Initializing USB Mass Storage driver...
  206. [ 65.105560] usbcore: registered new interface driver usb-storage
  207. [ 65.111663] USB Mass Storage support registered.
  208. [ 65.116729] mice: PS/2 mouse device common for all mice
  209. [ 65.122406] input: gpio-keys as /devices/platform/gpio-keys/input/input0
  210. [ 65.130249] input: twl4030_pwrbutton as /devices/platform/i2c_omap.1/i2c-1/1-0049/twl4030_pwrbutton/input/input1
  211. [ 65.141052] i2c /dev entries driver
  212. [ 65.145141] Linux video capture interface: v2.00
  213. [ 65.150146] omap-iommu omap-iommu.0: isp: version 1.1
  214. [ 65.156555] vpfe_init
  215. [ 65.159423] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
  216. [ 65.272644] mmci-omap-hs mmci-omap-hs.1: err -16 configuring card detect
  217. [ 65.279724] Registered led device: beagleboard::usr0
  218. [ 65.284881] Registered led device: beagleboard::usr1
  219. [ 65.291473] Registered led device: beagleboard::pmu_stat
  220. [ 65.298583] usbcore: registered new interface driver usbhid
  221. [ 65.304260] usbhid: USB HID core driver
  222. [ 65.308319] Advanced Linux Sound Architecture Driver Version 1.0.21.
  223. [ 65.315277] usbcore: registered new interface driver snd-usb-audio
  224. [ 65.398742] usb 2-2: new high speed USB device using ehci-omap and address 2
  225. [ 65.406524] No device for DAI omap-mcbsp-dai-0
  226. [ 65.411010] No device for DAI omap-mcbsp-dai-1
  227. [ 65.415527] No device for DAI omap-mcbsp-dai-2
  228. [ 65.420043] No device for DAI omap-mcbsp-dai-3
  229. [ 65.424560] No device for DAI omap-mcbsp-dai-4
  230. [ 65.429077] OMAP3 Beagle SoC init
  231. [ 65.433227] asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok
  232. [ 65.444793] ALSA device list:
  233. [ 65.447814] #0: omap3beagle (twl4030)
  234. [ 65.451782] oprofile: using arm/armv7
  235. [ 65.455749] TCP cubic registered
  236. [ 65.459014] NET: Registered protocol family 17
  237. [ 65.463592] NET: Registered protocol family 15
  238. [ 65.468200] lib80211: common routines for IEEE802.11 drivers
  239. [ 65.473937] ThumbEE CPU extension supported.
  240. [ 65.478302] Power Management for TI OMAP3.
  241. [ 65.483734] Unable to set L3 frequency (400000000)
  242. [ 65.488647] Switched to new clocking rate (Crystal/Core/MPU): 26.0/332/1000 MHz
  243. [ 65.496032] IVA2 clocking rate: 800 MHz
  244. [ 65.670715] SmartReflex driver initialized
  245. [ 65.674957] omap3beaglelmb: Driver registration complete
  246. [ 65.685638] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  247. [ 65.693939] registered taskstats version 1
  248. [ 65.698791] fbcvt: 1024x768@60: CVT Name - .786M3-R
  249. [ 65.733642] usb 2-2: New USB device found, idVendor=0424, idProduct=9514
  250. [ 65.740417] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  251. [ 65.748870] hub 2-2:1.0: USB hub found
  252. [ 65.752746] hub 2-2:1.0: 5 ports detected
  253. [ 65.822143] Console: switching to colour frame buffer device 128x48
  254. [ 65.838104] regulator_init_complete: incomplete constraints, leaving VAUX3 on
  255. [ 65.845855] regulator_init_complete: incomplete constraints, leaving VDAC on
  256. [ 65.853210] omap_vout omap_vout: probed for an unknown device
  257. [ 65.860198] RAMDISK: gzip image found at block 0
  258. [ 66.022430] mmc0: new high speed SDHC card at address 1234
  259. [ 66.039031] mmcblk0: mmc0:1234 SA04G 3.67 GiB
  260. [ 66.044036] mmcblk0:
  261. [ 66.046569] usb 2-2.1: new high speed USB device using ehci-omap and address 3
  262. [ 66.058898] Unable to handle kernel NULL pointer dereference at virtual address 00000014
  263. [ 66.067169] pgd = c0004000
  264. [ 66.069946] [00000014] *pgd=00000000
  265. [ 66.073577] Internal error: Oops: 5 [#1] PREEMPT
  266. [ 66.078277] last sysfs file:
  267. [ 66.081298] Modules linked in:
  268. [ 66.086578] CPU: 0 Not tainted (2.6.32 #3)
  269. [ 66.093231] PC is at musb_interrupt+0x9f8/0xbb8
  270. [ 66.100006] LR is at musb_interrupt+0x9e4/0xbb8
  271. [ 66.106781] pc : [<c033df94>] lr : [<c033df80>] psr: 60000193
  272. [ 66.106781] sp : df825d80 ip : df825db8 fp : 000000f0
  273. [ 66.122802] r10: 00000000 r9 : 00000099 r8 : 00000009
  274. [ 66.130249] r7 : 00000000 r6 : df81f108 r5 : 00000001 r4 : 00000000
  275. [ 66.139068] r3 : 00000000 r2 : 00000000 r1 : fa0ab000 r0 : df81f108
  276. [ 66.147888] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel
  277. [ 66.157623] Control: 10c5387d Table: 80004019 DAC: 00000017
  278. [ 66.165710] Process swapper (pid: 1, stack limit = 0xdf8242f0)
  279. [ 66.173919] Stack: (0xdf825d80 to 0xdf826000)
  280. [ 66.180633] 5d80: c0ac22e0 001b8000 00000000 00001000 00000000 df81f108 60000113 df892900
  281. [ 66.191253] 5da0: df824000 0000005c 00000000 00000000 c0667ac0 c033e1b8 000001b8 df892900
  282. [ 66.201873] 5dc0: c0635148 c00a33a0 00004000 df892900 c0635148 0000005c 00000002 00000001
  283. [ 66.212524] 5de0: df824000 00005d90 d7770000 c00a5498 0000005c 00000000 00000004 c003b074
  284. [ 66.223175] 5e00: df825e20 ffffffff fa200000 c003bb44 00000003 00000010 d7770b6c 00000190
  285. [ 66.233764] 5e20: d77677c4 d7767864 00000004 0000000f d7767866 00000003 00005d90 d7770000
  286. [ 66.244415] 5e40: d777052c df825e58 c0261224 c0260ebc 20000013 ffffffff 000092e2 d777252b
  287. [ 66.255096] 5e60: d7741dc0 d775eed8 d775fffa d775ffff d7767efe 00008000 00008000 000012e2
  288. [ 66.265777] 5e80: d777252c d777052c d7770f04 000001ff 0000003f d77677be d777052c 0000007f
  289. [ 66.276458] 5ea0: d7770000 00000006 0000002a d777052c 00001290 00000135 c000932c c0262060
  290. [ 66.287139] 5ec0: d7770054 d77702ec 00000000 d7741dc0 d777052c d777006c d7770068 d7770050
  291. [ 66.297821] 5ee0: d77702ec d7770054 d775ed70 d7767477 00000b89 00008000 00000000 00004000
  292. [ 66.308532] 5f00: 00000000 000012e2 d7741dc0 00000000 d775c000 00000000 00004000 d7760000
  293. [ 66.319244] 5f20: c000932c c001cfec df946840 c00ea4a4 00000000 c00092e4 00000000 00008000
  294. [ 66.329956] 5f40: 00000000 c001cbc4 d7745400 00000000 00000000 00000200 00000000 c00093f0
  295. [ 66.340667] 5f60: 00000001 c00096b8 00000000 00000000 c00092a8 c064a188 c0567c9b 00000000
  296. [ 66.351379] 5f80: c059bb81 5c2d2f7c 00000000 c003b794 00000080 c0030a0c c0030a08 00000000
  297. [ 66.362091] 5fa0: 00000000 00000000 00000000 00000000 00000000 c0009b24 df813940 df825f98
  298. [ 66.372772] 5fc0: c0030a0c c0030a08 00000000 c000913c c066b858 c002fa10 00000000 c066b858
  299. [ 66.383544] 5fe0: c002fa10 c0008458 00000000 00000000 00000000 c003c9dc 00200018 40020500
  300. [ 66.394287] [<c033df94>] (musb_interrupt+0x9f8/0xbb8) from [<c033e1b8>] (generic_interrupt+0x64/0x98)
  301. [ 66.406127] [<c033e1b8>] (generic_interrupt+0x64/0x98) from [<c00a33a0>] (handle_IRQ_event+0xac/0x1ec)
  302. [ 66.418090] [<c00a33a0>] (handle_IRQ_event+0xac/0x1ec) from [<c00a5498>] (handle_level_irq+0xbc/0x148)
  303. [ 66.430053] [<c00a5498>] (handle_level_irq+0xbc/0x148) from [<c003b074>] (asm_do_IRQ+0x74/0x98)
  304. [ 66.441406] [<c003b074>] (asm_do_IRQ+0x74/0x98) from [<c003bb44>] (__irq_svc+0x44/0xa8)
  305. [ 66.452056] Exception stack(0xdf825e10 to 0xdf825e58)
  306. [ 66.459716] 5e00: 00000003 00000010 d7770b6c 00000190
  307. [ 66.470550] 5e20: d77677c4 d7767864 00000004 0000000f d7767866 00000003 00005d90 d7770000
  308. [ 66.481414] 5e40: d777052c df825e58 c0261224 c0260ebc 20000013 ffffffff
  309. [ 66.490753] [<c003bb44>] (__irq_svc+0x44/0xa8) from [<c0260ebc>] (inflate_fast+0x11c/0x594)
  310. [ 66.501892] [<c0260ebc>] (inflate_fast+0x11c/0x594) from [<c0262060>] (zlib_inflate+0x93c/0x1318)
  311. [ 66.513580] [<c0262060>] (zlib_inflate+0x93c/0x1318) from [<c001cfec>] (gunzip+0x428/0x528)
  312. [ 66.524810] [<c001cfec>] (gunzip+0x428/0x528) from [<c00096b8>] (rd_load_image+0x328/0x694)
  313. [ 66.536041] [<c00096b8>] (rd_load_image+0x328/0x694) from [<c0009b24>] (initrd_load+0x38/0x328)
  314. [ 66.547729] [<c0009b24>] (initrd_load+0x38/0x328) from [<c000913c>] (prepare_namespace+0xc4/0x1d4)
  315. [ 66.559692] [<c000913c>] (prepare_namespace+0xc4/0x1d4) from [<c0008458>] (kernel_init+0xe8/0x128)
  316. [ 66.571655] [<c0008458>] (kernel_init+0xe8/0x128) from [<c003c9dc>] (kernel_thread_exit+0x0/0x8)
  317. [ 66.583496] Code: e3530003 13a02000 05963078 05933018 (05d33014)
  318. [ 66.592712] ---[ end trace 0fd9834bf991f77b ]---
  319. [ 66.600402] Kernel panic - not syncing: Fatal exception in interrupt
  320.  
Powered by spacepaste. Paste removal.