[ 0.000000] microcode: microcode updated early to revision 0x25, date = 2018-04-02 [ 0.000000] Linux version 4.14.51-gentoo (root@richard-desktop) (gcc version 8.1.0 (Gentoo 8.1.0-r3 p1.3)) #7 SMP Mon Jun 25 21:39:53 CEST 2018 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.14.51-gentoo root=/dev/sda4 ro rootfstype=ext4 iommu=on intel_iommu=on [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a87fcfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a87fd000-0x00000000a8803fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000a8804000-0x00000000a8c50fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a8c51000-0x00000000a90a1fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000a90a2000-0x00000000bc661fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bc662000-0x00000000bc869fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bc86a000-0x00000000bc87ffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bc880000-0x00000000bcdc1fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bcdc2000-0x00000000bdf5bfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bdf5c000-0x00000000bdffefff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000bdfff000-0x00000000bdffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf000000-0x00000000cf1fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000062fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.31 by American Megatrends [ 0.000000] efi: ESRT=0xbdf5a818 ACPI=0xbc86e000 ACPI 2.0=0xbc86e000 SMBIOS=0xf04c0 MPS=0xfd500 [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: ASUS All Series/Z87-PRO, BIOS 1405 08/19/2013 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x62fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D7FFF write-protect [ 0.000000] D8000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7C00000000 write-back [ 0.000000] 1 base 0400000000 mask 7E00000000 write-back [ 0.000000] 2 base 0600000000 mask 7FC0000000 write-back [ 0.000000] 3 base 00C0000000 mask 7FC0000000 uncachable [ 0.000000] 4 base 00BF000000 mask 7FFF000000 uncachable [ 0.000000] 5 base 0630000000 mask 7FF0000000 uncachable [ 0.000000] 6 base 062FE00000 mask 7FFFE00000 uncachable [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] e820: update [mem 0xbf000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xbe000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fd7f0-0x000fd7ff] mapped at [ffffffffff2407f0] [ 0.000000] esrt: Reserving ESRT space from 0x00000000bdf5a818 to 0x00000000bdf5a850. [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x0396c000, 0x0396cfff] PGTABLE [ 0.000000] BRK [0x0396d000, 0x0396dfff] PGTABLE [ 0.000000] BRK [0x0396e000, 0x0396efff] PGTABLE [ 0.000000] BRK [0x0396f000, 0x0396ffff] PGTABLE [ 0.000000] BRK [0x03970000, 0x03970fff] PGTABLE [ 0.000000] BRK [0x03971000, 0x03971fff] PGTABLE [ 0.000000] Secure boot could not be determined [ 0.000000] RAMDISK: [mem 0x37fe3000-0x37fe8fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000BC86E000 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000BC86E080 00007C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000BC87AE88 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000BC86E198 00CCED (v02 ALASKA A M I 00000024 INTL 20091112) [ 0.000000] ACPI: FACS 0x00000000BCDC0080 000040 [ 0.000000] ACPI: APIC 0x00000000BC87AF98 000092 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000BC87B030 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 0x00000000BC87B078 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.000000] ACPI: SSDT 0x00000000BC87B5B8 000AD8 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: MCFG 0x00000000BC87C090 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000BC87C0D0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000BC87C108 00036D (v01 SataRe SataTabl 00001000 INTL 20091112) [ 0.000000] ACPI: SSDT 0x00000000BC87C478 00329E (v01 SaSsdt SaSsdt 00003000 INTL 20091112) [ 0.000000] ACPI: DMAR 0x00000000BC87F7A8 0000B8 (v01 INTEL HSW 00000001 INTL 00000001) [ 0.000000] ACPI: BGRT 0x00000000BC87F770 000038 (v00 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000062fdfffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x62fdf7000-0x62fdfafff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000062fdfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000a87fcfff] [ 0.000000] node 0: [mem 0x00000000a8804000-0x00000000a8c50fff] [ 0.000000] node 0: [mem 0x00000000a90a2000-0x00000000bc661fff] [ 0.000000] node 0: [mem 0x00000000bdfff000-0x00000000bdffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000062fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000062fdfffff] [ 0.000000] On node 0 totalpages: 6209448 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 43 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 11977 pages used for memmap [ 0.000000] DMA32 zone: 766475 pages, LIFO batch:31 [ 0.000000] Normal zone: 84984 pages used for memmap [ 0.000000] Normal zone: 5438976 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at 0x00000000bf200000-0x00000000cf1fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xa87fd000-0xa8803fff] [ 0.000000] PM: Registered nosave memory: [mem 0xa8c51000-0xa90a1fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbc662000-0xbc869fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbc86a000-0xbc87ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbc880000-0xbcdc1fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbcdc2000-0xbdf5bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbdf5c000-0xbdffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xbe000000-0xbeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf000000-0xcf1fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcf200000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xcf200000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 44 pages/cpu @ffff88062fa00000 s142872 r8192 d29160 u262144 [ 0.000000] pcpu-alloc: s142872 r8192 d29160 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 6112380 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.14.51-gentoo root=/dev/sda4 ro rootfstype=ext4 iommu=on intel_iommu=on [ 0.000000] DMAR: IOMMU enabled [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 24129228K/24837792K available (12300K kernel code, 1374K rwdata, 3104K rodata, 1376K init, 692K bss, 708564K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.001000] tsc: Detected 3397.922 MHz processor [ 0.001000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6795.84 BogoMIPS (lpj=3397922) [ 0.001000] pid_max: default: 32768 minimum: 301 [ 0.001000] ACPI: Core revision 20170728 [ 0.006189] ACPI: 5 ACPI AML tables successfully acquired and loaded [ 0.006780] Security Framework initialized [ 0.006783] SELinux: Initializing. [ 0.006787] SELinux: Starting in permissive mode [ 0.010610] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 0.012506] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.012574] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.012634] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.012751] CPU: Physical Processor ID: 0 [ 0.012753] CPU: Processor Core ID: 0 [ 0.012757] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.012759] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.012763] mce: CPU supports 9 MCE banks [ 0.012769] CPU0: Thermal monitoring enabled (TM1) [ 0.012780] process: using mwait in idle threads [ 0.012783] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.012784] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.012786] Spectre V2 : Mitigation: Full generic retpoline [ 0.012788] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier [ 0.012789] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.012791] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.012869] Freeing SMP alternatives memory: 40K [ 0.017919] smpboot: Max logical packages: 2 [ 0.017923] DMAR: Host address width 39 [ 0.017925] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.017932] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a [ 0.017933] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.017937] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da [ 0.017939] DMAR: RMRR base: 0x000000bc7f1000 end: 0x000000bc7fdfff [ 0.017940] DMAR: RMRR base: 0x000000bf000000 end: 0x000000cf1fffff [ 0.017943] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.017944] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.018174] DMAR-IR: Enabled IRQ remapping in xapic mode [ 0.018558] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.028569] TSC deadline timer enabled [ 0.028571] smpboot: CPU0: Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz (family: 0x6, model: 0x3c, stepping: 0x3) [ 0.028610] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.028641] ... version: 3 [ 0.028642] ... bit width: 48 [ 0.028643] ... generic registers: 4 [ 0.028645] ... value mask: 0000ffffffffffff [ 0.028646] ... max period: 00007fffffffffff [ 0.028647] ... fixed-purpose events: 3 [ 0.028648] ... event mask: 000000070000000f [ 0.028670] Hierarchical SRCU implementation. [ 0.028754] smp: Bringing up secondary CPUs ... [ 0.028791] x86: Booting SMP configuration: [ 0.028792] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.034371] smp: Brought up 1 node, 8 CPUs [ 0.034371] smpboot: Total of 8 processors activated (54366.75 BogoMIPS) [ 0.035397] devtmpfs: initialized [ 0.035397] PM: Registering ACPI NVS region [mem 0xa87fd000-0xa8803fff] (28672 bytes) [ 0.035397] PM: Registering ACPI NVS region [mem 0xbc880000-0xbcdc1fff] (5513216 bytes) [ 0.035397] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.035397] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.035397] kworker/u16:0 (50) used greatest stack depth: 14312 bytes left [ 0.035397] RTC time: 9:14:28, date: 06/27/18 [ 0.035397] NET: Registered protocol family 16 [ 0.035397] cpuidle: using governor menu [ 0.035397] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.035397] ACPI: bus type PCI registered [ 0.036001] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.036001] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.036001] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override. [ 0.036001] PCI: Using configuration type 1 for base access [ 0.036014] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.038276] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.038276] ACPI: Added _OSI(Module Device) [ 0.038276] ACPI: Added _OSI(Processor Device) [ 0.038276] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.038276] ACPI: Added _OSI(Processor Aggregator Device) [ 0.038276] ACPI: Executed 1 blocks of module-level executable AML code [ 0.040118] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.041076] ACPI: Dynamic OEM Table Load: [ 0.041082] ACPI: SSDT 0xFFFF8806135E0000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.041169] ACPI: Dynamic OEM Table Load: [ 0.041169] ACPI: SSDT 0xFFFF8806135F0000 0005AA (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.041364] ACPI: Dynamic OEM Table Load: [ 0.041364] ACPI: SSDT 0xFFFF880613AF8000 000119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.042892] ACPI: Interpreter enabled [ 0.042910] ACPI: (supports S0 S3 S4 S5) [ 0.042911] ACPI: Using IOAPIC for interrupt routing [ 0.042931] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.042931] ACPI: Enabled 9 GPEs in block 00 to 3F [ 0.048462] ACPI: Power Resource [FN00] (off) [ 0.048507] ACPI: Power Resource [FN01] (off) [ 0.048549] ACPI: Power Resource [FN02] (off) [ 0.048590] ACPI: Power Resource [FN03] (off) [ 0.048631] ACPI: Power Resource [FN04] (off) [ 0.049153] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.049158] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.049296] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME] [ 0.049373] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability] [ 0.049374] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.049542] PCI host bridge to bus 0000:00 [ 0.049544] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.049546] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.049548] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.049551] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.049553] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.049555] pci_bus 0000:00: root bus resource [mem 0xcf200000-0xfeafffff window] [ 0.049557] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.049564] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000 [ 0.049623] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400 [ 0.049650] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.049720] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000 [ 0.049728] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit] [ 0.049732] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.049735] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.049743] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.049790] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 [ 0.049796] pci 0000:00:03.0: reg 0x10: [mem 0xf7c34000-0xf7c37fff 64bit] [ 0.049862] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.049879] pci 0000:00:14.0: reg 0x10: [mem 0xf7c20000-0xf7c2ffff 64bit] [ 0.049926] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.049969] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.049986] pci 0000:00:16.0: reg 0x10: [mem 0xf7c3f000-0xf7c3f00f 64bit] [ 0.050041] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.050089] pci 0000:00:19.0: [8086:153b] type 00 class 0x020000 [ 0.050103] pci 0000:00:19.0: reg 0x10: [mem 0xf7c00000-0xf7c1ffff] [ 0.050109] pci 0000:00:19.0: reg 0x14: [mem 0xf7c3d000-0xf7c3dfff] [ 0.050115] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f] [ 0.050161] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.050207] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.050224] pci 0000:00:1a.0: reg 0x10: [mem 0xf7c3c000-0xf7c3c3ff] [ 0.050292] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.050338] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 [ 0.050352] pci 0000:00:1b.0: reg 0x10: [mem 0xf7c30000-0xf7c33fff 64bit] [ 0.050400] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.050445] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.050500] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.050516] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.050519] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.050583] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.050638] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.050653] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.050656] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.050718] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.050773] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.050787] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.050789] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.050850] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400 [ 0.050905] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.050919] pci 0000:00:1c.5: Enabling MPC IRBNCE [ 0.050921] pci 0000:00:1c.5: Intel PCH root port ACS workaround enabled [ 0.050986] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.051004] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c3b000-0xf7c3b3ff] [ 0.051073] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.051121] pci 0000:00:1f.0: [8086:8c44] type 00 class 0x060100 [ 0.051249] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.051262] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7] [ 0.051267] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3] [ 0.051273] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7] [ 0.051278] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3] [ 0.051283] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.051289] pci 0000:00:1f.2: reg 0x24: [mem 0xf7c3a000-0xf7c3a7ff] [ 0.051315] pci 0000:00:1f.2: PME# supported from D3hot [ 0.051355] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.051369] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c39000-0xf7c390ff 64bit] [ 0.051384] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.051455] pci 0000:01:00.0: [1002:6798] type 00 class 0x030000 [ 0.051466] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.051471] pci 0000:01:00.0: reg 0x18: [mem 0xf7b00000-0xf7b3ffff 64bit] [ 0.051474] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 0.051479] pci 0000:01:00.0: reg 0x30: [mem 0xf7b40000-0xf7b5ffff pref] [ 0.051505] pci 0000:01:00.0: supports D1 D2 [ 0.051506] pci 0000:01:00.0: PME# supported from D1 D2 D3hot [ 0.051537] pci 0000:01:00.1: [1002:aaa0] type 00 class 0x040300 [ 0.051548] pci 0000:01:00.1: reg 0x10: [mem 0xf7b60000-0xf7b63fff 64bit] [ 0.051586] pci 0000:01:00.1: supports D1 D2 [ 0.054009] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.054013] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.054015] pci 0000:00:01.0: bridge window [mem 0xf7b00000-0xf7bfffff] [ 0.054017] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.054043] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.054087] pci 0000:03:00.0: [168c:0034] type 00 class 0x028000 [ 0.054115] pci 0000:03:00.0: reg 0x10: [mem 0xf7a00000-0xf7a7ffff 64bit] [ 0.054149] pci 0000:03:00.0: reg 0x30: [mem 0xf7a80000-0xf7a8ffff pref] [ 0.054212] pci 0000:03:00.0: supports D1 D2 [ 0.054213] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.057014] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.057019] pci 0000:00:1c.1: bridge window [mem 0xf7a00000-0xf7afffff] [ 0.057058] pci 0000:04:00.0: [1b4b:9235] type 00 class 0x010601 [ 0.057077] pci 0000:04:00.0: reg 0x10: [io 0xd050-0xd057] [ 0.057086] pci 0000:04:00.0: reg 0x14: [io 0xd040-0xd043] [ 0.057094] pci 0000:04:00.0: reg 0x18: [io 0xd030-0xd037] [ 0.057103] pci 0000:04:00.0: reg 0x1c: [io 0xd020-0xd023] [ 0.057111] pci 0000:04:00.0: reg 0x20: [io 0xd000-0xd01f] [ 0.057120] pci 0000:04:00.0: reg 0x24: [mem 0xf7940000-0xf79407ff] [ 0.057128] pci 0000:04:00.0: reg 0x30: [mem 0xf7900000-0xf793ffff pref] [ 0.057176] pci 0000:04:00.0: PME# supported from D3hot [ 0.060011] pci 0000:00:1c.4: PCI bridge to [bus 04] [ 0.060015] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.060017] pci 0000:00:1c.4: bridge window [mem 0xf7900000-0xf79fffff] [ 0.060057] pci 0000:05:00.0: [1b21:0612] type 00 class 0x010601 [ 0.060079] pci 0000:05:00.0: reg 0x10: [io 0xc050-0xc057] [ 0.060088] pci 0000:05:00.0: reg 0x14: [io 0xc040-0xc043] [ 0.060098] pci 0000:05:00.0: reg 0x18: [io 0xc030-0xc037] [ 0.060107] pci 0000:05:00.0: reg 0x1c: [io 0xc020-0xc023] [ 0.060117] pci 0000:05:00.0: reg 0x20: [io 0xc000-0xc01f] [ 0.060127] pci 0000:05:00.0: reg 0x24: [mem 0xf7800000-0xf78001ff] [ 0.063011] pci 0000:00:1c.5: PCI bridge to [bus 05] [ 0.063014] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff] [ 0.063016] pci 0000:00:1c.5: bridge window [mem 0xf7800000-0xf78fffff] [ 0.063424] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.063456] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.063485] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 10 11 12 14 15) [ 0.063515] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.063544] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.063572] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 *15) [ 0.063601] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15) [ 0.063630] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15) [ 0.063893] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.063893] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.063893] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 0.063893] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.063893] pci 0000:00:02.0: vgaarb: no bridge control possible [ 0.063893] vgaarb: loaded [ 0.063893] SCSI subsystem initialized [ 0.063893] libata version 3.00 loaded. [ 0.064020] ACPI: bus type USB registered [ 0.064032] usbcore: registered new interface driver usbfs [ 0.064037] usbcore: registered new interface driver hub [ 0.064052] usbcore: registered new device driver usb [ 0.064071] pps_core: LinuxPPS API ver. 1 registered [ 0.064072] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.064076] PTP clock support registered [ 0.064093] EDAC MC: Ver: 3.0.0 [ 0.064093] Registered efivars operations [ 0.067168] PCI: Using ACPI for IRQ routing [ 0.068301] PCI: pci_cache_line_size set to 64 bytes [ 0.068339] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.068340] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.068340] e820: reserve RAM buffer [mem 0xa87fd000-0xabffffff] [ 0.068341] e820: reserve RAM buffer [mem 0xa8c51000-0xabffffff] [ 0.068342] e820: reserve RAM buffer [mem 0xbc662000-0xbfffffff] [ 0.068343] e820: reserve RAM buffer [mem 0xbe000000-0xbfffffff] [ 0.068343] e820: reserve RAM buffer [mem 0x62fe00000-0x62fffffff] [ 0.068445] NetLabel: Initializing [ 0.068445] NetLabel: domain hash size = 128 [ 0.068445] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.068445] NetLabel: unlabeled traffic allowed by default [ 0.068445] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.068445] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.070014] clocksource: Switched to clocksource hpet [ 0.075376] VFS: Disk quotas dquot_6.6.0 [ 0.075388] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.076394] pnp: PnP ACPI init [ 0.076445] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.076451] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.076556] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.076559] system 00:01: [io 0xffff] has been reserved [ 0.076561] system 00:01: [io 0xffff] has been reserved [ 0.076563] system 00:01: [io 0xffff] has been reserved [ 0.076565] system 00:01: [io 0x1c00-0x1cfe] has been reserved [ 0.076566] system 00:01: [io 0x1d00-0x1dfe] has been reserved [ 0.076568] system 00:01: [io 0x1e00-0x1efe] has been reserved [ 0.076570] system 00:01: [io 0x1f00-0x1ffe] has been reserved [ 0.076573] system 00:01: [io 0x1800-0x18fe] has been reserved [ 0.076575] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.076579] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.076592] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.076619] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.076624] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.076672] system 00:04: [io 0x0290-0x029f] has been reserved [ 0.076677] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.076712] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.076718] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.076979] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.076981] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.076983] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.076985] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.076988] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.076990] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.076992] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.076994] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.076996] system 00:06: [mem 0xff000000-0xffffffff] has been reserved [ 0.076998] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.077000] system 00:06: [mem 0xf7fef000-0xf7feffff] has been reserved [ 0.077008] system 00:06: [mem 0xf7ff0000-0xf7ff0fff] has been reserved [ 0.077012] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.077169] pnp: PnP ACPI: found 7 devices [ 0.081697] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.081723] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.081726] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.081729] pci 0000:00:01.0: bridge window [mem 0xf7b00000-0xf7bfffff] [ 0.081731] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.081735] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.081743] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.081747] pci 0000:00:1c.1: bridge window [mem 0xf7a00000-0xf7afffff] [ 0.081754] pci 0000:00:1c.4: PCI bridge to [bus 04] [ 0.081756] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.081760] pci 0000:00:1c.4: bridge window [mem 0xf7900000-0xf79fffff] [ 0.081766] pci 0000:00:1c.5: PCI bridge to [bus 05] [ 0.081768] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff] [ 0.081772] pci 0000:00:1c.5: bridge window [mem 0xf7800000-0xf78fffff] [ 0.081779] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.081780] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.081781] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.081782] pci_bus 0000:00: resource 7 [mem 0x000d8000-0x000dbfff window] [ 0.081783] pci_bus 0000:00: resource 8 [mem 0x000dc000-0x000dffff window] [ 0.081784] pci_bus 0000:00: resource 9 [mem 0xcf200000-0xfeafffff window] [ 0.081785] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.081786] pci_bus 0000:01: resource 1 [mem 0xf7b00000-0xf7bfffff] [ 0.081787] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] [ 0.081788] pci_bus 0000:03: resource 1 [mem 0xf7a00000-0xf7afffff] [ 0.081789] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] [ 0.081789] pci_bus 0000:04: resource 1 [mem 0xf7900000-0xf79fffff] [ 0.081790] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] [ 0.081791] pci_bus 0000:05: resource 1 [mem 0xf7800000-0xf78fffff] [ 0.081849] NET: Registered protocol family 2 [ 0.081966] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.082183] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.082280] TCP: Hash tables configured (established 262144 bind 65536) [ 0.082311] UDP hash table entries: 16384 (order: 7, 524288 bytes) [ 0.082371] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes) [ 0.082450] NET: Registered protocol family 1 [ 0.082513] RPC: Registered named UNIX socket transport module. [ 0.082516] RPC: Registered udp transport module. [ 0.082517] RPC: Registered tcp transport module. [ 0.082518] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.082526] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.115075] PCI: CLS 64 bytes, default 64 [ 0.115095] Unpacking initramfs... [ 0.115197] Freeing initrd memory: 24K [ 0.115207] DMAR: No ATSR found [ 0.115232] DMAR: dmar0: Using Queued invalidation [ 0.115237] DMAR: dmar1: Using Queued invalidation [ 0.115268] DMAR: Setting RMRR: [ 0.115305] DMAR: Setting identity map for device 0000:00:02.0 [0xbf000000 - 0xcf1fffff] [ 0.116503] DMAR: Setting identity map for device 0000:00:14.0 [0xbc7f1000 - 0xbc7fdfff] [ 0.116546] DMAR: Setting identity map for device 0000:00:1a.0 [0xbc7f1000 - 0xbc7fdfff] [ 0.116587] DMAR: Setting identity map for device 0000:00:1d.0 [0xbc7f1000 - 0xbc7fdfff] [ 0.116600] DMAR: Prepare 0-16MiB unity mapping for LPC [ 0.116631] DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff] [ 0.116735] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 0.116766] iommu: Adding device 0000:00:00.0 to group 0 [ 0.116776] iommu: Adding device 0000:00:01.0 to group 1 [ 0.116782] iommu: Adding device 0000:00:02.0 to group 2 [ 0.116788] iommu: Adding device 0000:00:03.0 to group 3 [ 0.116793] iommu: Adding device 0000:00:14.0 to group 4 [ 0.116801] iommu: Adding device 0000:00:16.0 to group 5 [ 0.116806] iommu: Adding device 0000:00:19.0 to group 6 [ 0.116812] iommu: Adding device 0000:00:1a.0 to group 7 [ 0.116817] iommu: Adding device 0000:00:1b.0 to group 8 [ 0.116823] iommu: Adding device 0000:00:1c.0 to group 9 [ 0.116830] iommu: Adding device 0000:00:1c.1 to group 10 [ 0.116836] iommu: Adding device 0000:00:1c.4 to group 11 [ 0.116841] iommu: Adding device 0000:00:1c.5 to group 12 [ 0.116847] iommu: Adding device 0000:00:1d.0 to group 13 [ 0.116857] iommu: Adding device 0000:00:1f.0 to group 14 [ 0.116864] iommu: Adding device 0000:00:1f.2 to group 14 [ 0.116869] iommu: Adding device 0000:00:1f.3 to group 14 [ 0.116873] iommu: Adding device 0000:01:00.0 to group 1 [ 0.116877] iommu: Adding device 0000:01:00.1 to group 1 [ 0.116883] iommu: Adding device 0000:03:00.0 to group 15 [ 0.116889] iommu: Adding device 0000:04:00.0 to group 16 [ 0.116895] iommu: Adding device 0000:05:00.0 to group 17 [ 0.117869] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 0.117871] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 0.117873] RAPL PMU: hw unit of domain package 2^-14 Joules [ 0.117874] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 0.117875] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 0.118514] Scanning for low memory corruption every 60 seconds [ 0.118661] audit: initializing netlink subsys (disabled) [ 0.118689] audit: type=2000 audit(1530090868.117:1): state=initialized audit_enabled=0 res=1 [ 0.118956] workingset: timestamp_bits=40 max_order=23 bucket_order=0 [ 0.119948] NFS: Registering the id_resolver key type [ 0.119955] random: get_random_bytes called from key_alloc+0x21a/0x490 with crng_init=0 [ 0.119959] Key type id_resolver registered [ 0.119960] Key type id_legacy registered [ 0.119963] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.120019] SELinux: Registering netfilter hooks [ 0.120823] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.120826] io scheduler noop registered [ 0.120828] io scheduler deadline registered [ 0.120850] io scheduler cfq registered (default) [ 0.120852] io scheduler mq-deadline registered [ 0.120853] io scheduler kyber registered [ 0.121301] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.121571] Non-volatile memory driver v1.3 [ 0.121586] Linux agpgart interface v0.103 [ 0.121618] efifb: probing for efifb [ 0.121626] efifb: framebuffer at 0xd0000000, using 3072k, total 3072k [ 0.121628] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 0.121629] efifb: scrolling: redraw [ 0.121631] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.122732] Console: switching to colour frame buffer device 128x48 [ 0.123817] fb0: EFI VGA frame buffer device [ 0.123898] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.123925] ACPI: Power Button [PWRB] [ 0.123958] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.123987] ACPI: Power Button [PWRF] [ 0.124324] Monitor-Mwait will be used to enter C-1 state [ 0.124330] Monitor-Mwait will be used to enter C-2 state [ 0.125270] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 0.125374] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.125390] ACPI: Thermal Zone [TZ00] (28 C) [ 0.125532] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.125548] ACPI: Thermal Zone [TZ01] (30 C) [ 0.125735] [drm] Memory usable by graphics device = 2048M [ 0.125751] [drm] VT-d active for gfx access [ 0.125765] checking generic (d0000000 300000) vs hw (d0000000 10000000) [ 0.125765] fb: switching to inteldrmfb from EFI VGA [ 0.125788] Console: switching to colour dummy device 80x25 [ 0.125831] [drm] Replacing VGA console driver [ 0.126017] [drm] DMAR active, disabling use of stolen memory [ 0.132066] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 0.132068] [drm] Driver supports precise vblank timestamp query. [ 0.134053] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem [ 0.136632] [drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 0 [ 0.137439] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 0.137583] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2 [ 0.138764] loop: module loaded [ 0.138810] ahci 0000:00:1f.2: version 3.0 [ 0.138923] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.138927] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst [ 0.154321] scsi host0: ahci [ 0.154390] scsi host1: ahci [ 0.154447] scsi host2: ahci [ 0.154497] scsi host3: ahci [ 0.154548] scsi host4: ahci [ 0.154602] scsi host5: ahci [ 0.154620] ata1: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a100 irq 27 [ 0.154623] ata2: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a180 irq 27 [ 0.154625] ata3: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a200 irq 27 [ 0.154627] ata4: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a280 irq 27 [ 0.154629] ata5: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a300 irq 27 [ 0.154632] ata6: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a380 irq 27 [ 0.164834] ahci 0000:04:00.0: AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 0.164840] ahci 0000:04:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 0.165159] scsi host6: ahci [ 0.165218] scsi host7: ahci [ 0.165268] scsi host8: ahci [ 0.165323] scsi host9: ahci [ 0.165349] ata7: SATA max UDMA/133 abar m2048@0xf7940000 port 0xf7940100 irq 28 [ 0.165353] ata8: SATA max UDMA/133 abar m2048@0xf7940000 port 0xf7940180 irq 28 [ 0.165356] ata9: SATA max UDMA/133 abar m2048@0xf7940000 port 0xf7940200 irq 28 [ 0.165360] ata10: SATA max UDMA/133 abar m2048@0xf7940000 port 0xf7940280 irq 28 [ 0.165479] ahci 0000:05:00.0: SSS flag set, parallel bus scan disabled [ 0.165512] ahci 0000:05:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 0.165516] ahci 0000:05:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs [ 0.165720] scsi host10: ahci [ 0.165778] scsi host11: ahci [ 0.165812] ata11: SATA max UDMA/133 abar m512@0xf7800000 port 0xf7800100 irq 29 [ 0.165817] ata12: SATA max UDMA/133 abar m512@0xf7800000 port 0xf7800180 irq 29 [ 0.165879] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 0.165881] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.165894] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 0.165897] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.165908] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 0.165910] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.166011] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 0.241096] fbcon: inteldrmfb (fb0) is primary device [ 0.245202] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 0.297287] Console: switching to colour frame buffer device 320x90 [ 0.311194] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 0.326959] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) d8:50:e6:52:84:b3 [ 0.326994] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 0.327056] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 0.327108] sky2: driver version 1.30 [ 0.327187] VFIO - User Level meta-driver version: 0.3 [ 0.327255] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.327284] ehci-pci: EHCI PCI platform driver [ 0.327375] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.327434] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.327474] ehci-pci 0000:00:1a.0: debug port 2 [ 0.331406] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.331416] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c3c000 [ 0.338009] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.338054] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.338083] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.338114] usb usb1: Product: EHCI Host Controller [ 0.338136] usb usb1: Manufacturer: Linux 4.14.51-gentoo ehci_hcd [ 0.338162] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.338257] hub 1-0:1.0: USB hub found [ 0.338279] hub 1-0:1.0: 2 ports detected [ 0.338450] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.338502] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.338542] ehci-pci 0000:00:1d.0: debug port 2 [ 0.342454] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.342461] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c3b000 [ 0.349046] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.349085] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.349105] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.349125] usb usb2: Product: EHCI Host Controller [ 0.349141] usb usb2: Manufacturer: Linux 4.14.51-gentoo ehci_hcd [ 0.349158] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.349290] hub 2-0:1.0: USB hub found [ 0.349308] hub 2-0:1.0: 2 ports detected [ 0.349395] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.349417] ohci-pci: OHCI PCI platform driver [ 0.349449] uhci_hcd: USB Universal Host Controller Interface driver [ 0.349484] usbcore: registered new interface driver usblp [ 0.349510] usbcore: registered new interface driver usb-storage [ 0.349541] i8042: PNP: No PS/2 controller found. [ 0.349603] mousedev: PS/2 mouse device common for all mice [ 0.349738] rtc_cmos 00:02: RTC can wake from S4 [ 0.349850] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.349890] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.350013] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.350520] IR NEC protocol handler initialized [ 0.350536] IR RC5(x/sz) protocol handler initialized [ 0.350552] IR RC6 protocol handler initialized [ 0.350566] IR JVC protocol handler initialized [ 0.350581] IR Sony protocol handler initialized [ 0.350596] IR SANYO protocol handler initialized [ 0.350611] IR Sharp protocol handler initialized [ 0.350625] IR MCE Keyboard/mouse protocol handler initialized [ 0.350643] IR XMP protocol handler initialized [ 0.350715] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 0.350742] intel_pstate: Intel P-state driver initializing [ 0.350840] EFI Variables Facility v0.08 2004-May-17 [ 0.358025] hidraw: raw HID events driver (C) Jiri Kosina [ 0.358556] usbcore: registered new interface driver usbhid [ 0.358620] usbhid: USB HID core driver [ 0.362732] Netfilter messages via NETLINK v0.30. [ 0.363954] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 0.365108] ctnetlink v0.93: registering with nfnetlink. [ 0.366230] ip_tables: (C) 2000-2006 Netfilter Core Team [ 0.367433] Initializing XFRM netlink socket [ 0.368580] NET: Registered protocol family 10 [ 0.369813] Segment Routing with IPv6 [ 0.370872] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 0.372035] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.373222] NET: Registered protocol family 17 [ 0.374374] Key type dns_resolver registered [ 0.375824] microcode: sig=0x306c3, pf=0x2, revision=0x25 [ 0.377085] microcode: Microcode Update Driver: v2.2. [ 0.377092] sched_clock: Marking stable (377082485, 0)->(385148983, -8066498) [ 0.379567] registered taskstats version 1 [ 0.381013] Magic number: 6:151:223 [ 0.382222] console [netcon0] enabled [ 0.383365] netconsole: network logging started [ 0.460704] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.463099] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.465243] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.467806] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.469922] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.471043] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.472207] ata1.00: supports DRM functions and may not be fully accessible [ 0.473596] ata5.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133 [ 0.474989] ata5.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 0.476430] ata2.00: ATA-9: WDC WD30EFRX-68EUZN0, 80.00A80, max UDMA/133 [ 0.477430] ata2.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 0.477443] ata8: SATA link down (SStatus 0 SControl 300) [ 0.478655] ata11: SATA link down (SStatus 0 SControl 300) [ 0.480427] ata6.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133 [ 0.481804] ata6.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 0.483177] ata4.00: NCQ Send/Recv Log not supported [ 0.484528] ata4.00: ATA-9: Samsung SSD 840 PRO Series, DXM05B0Q, max UDMA/133 [ 0.485887] ata4.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 0.487374] ata3.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133 [ 0.488773] ata3.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 0.490181] ata1.00: disabling queued TRIM support [ 0.490182] ata1.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT02B6Q, max UDMA/133 [ 0.491609] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 0.493031] ata5.00: configured for UDMA/133 [ 0.494546] ata2.00: configured for UDMA/133 [ 0.495915] ata6.00: configured for UDMA/133 [ 0.497441] ata3.00: configured for UDMA/133 [ 0.498930] ata4.00: NCQ Send/Recv Log not supported [ 0.500003] ata4.00: configured for UDMA/133 [ 0.501598] ata1.00: supports DRM functions and may not be fully accessible [ 0.503123] ata1.00: disabling queued TRIM support [ 0.504488] ata1.00: configured for UDMA/133 [ 0.505702] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5 [ 0.506996] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.507185] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 0.507225] sd 0:0:0:0: [sda] Write Protect is off [ 0.507226] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.507306] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.508675] sda: sda1 sda2 sda3 sda4 sda6 [ 0.508959] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.513541] scsi 1:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A80 PQ: 0 ANSI: 5 [ 0.514768] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 0.514790] sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 0.514791] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 0.514800] sd 1:0:0:0: [sdb] Write Protect is off [ 0.514801] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 0.514818] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.520567] scsi 2:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5 [ 0.521811] sd 2:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 0.521820] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 0.521885] scsi 3:0:0:0: Direct-Access ATA Samsung SSD 840 5B0Q PQ: 0 ANSI: 5 [ 0.521966] ata4.00: Enabling discard_zeroes_data [ 0.521982] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 0.522029] sd 3:0:0:0: [sdd] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 0.522039] sd 3:0:0:0: [sdd] Write Protect is off [ 0.522040] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 0.522052] scsi 4:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5 [ 0.522057] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.522124] ata4.00: Enabling discard_zeroes_data [ 0.522151] sd 4:0:0:0: Attached scsi generic sg4 type 0 [ 0.522169] sd 4:0:0:0: [sde] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 0.522171] sd 4:0:0:0: [sde] 4096-byte physical blocks [ 0.522181] sd 4:0:0:0: [sde] Write Protect is off [ 0.522183] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 0.522199] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.522212] scsi 5:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5 [ 0.522308] sd 5:0:0:0: Attached scsi generic sg5 type 0 [ 0.522331] sd 5:0:0:0: [sdf] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 0.522332] sd 5:0:0:0: [sdf] 4096-byte physical blocks [ 0.522340] sd 5:0:0:0: [sdf] Write Protect is off [ 0.522342] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 0.522355] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.522367] sdd: sdd1 sdd2 sdd3 sdd4 [ 0.522524] ata4.00: Enabling discard_zeroes_data [ 0.522612] sd 3:0:0:0: [sdd] Attached SCSI disk [ 0.548158] sd 2:0:0:0: [sdc] 4096-byte physical blocks [ 0.549254] sd 2:0:0:0: [sdc] Write Protect is off [ 0.550335] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 0.550342] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.565816] sdb: sdb1 sdb9 [ 0.567397] sd 1:0:0:0: [sdb] Attached SCSI disk [ 0.570619] sde: sde1 sde9 [ 0.570899] sdf: sdf1 sdf9 [ 0.571202] sd 5:0:0:0: [sdf] Attached SCSI disk [ 0.574356] sd 4:0:0:0: [sde] Attached SCSI disk [ 0.596103] sdc: sdc1 sdc9 [ 0.597794] sd 2:0:0:0: [sdc] Attached SCSI disk [ 0.631054] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.632767] ata10.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133 [ 0.634415] ata10.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 0.636733] ata10.00: configured for UDMA/133 [ 0.639058] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.641638] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.643679] ata7.00: ATAPI: TSSTcorp CDDVDW SH-224DB, SB00, max UDMA/100 [ 0.646439] ata9.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133 [ 0.649000] ata9.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 0.652285] ata9.00: configured for UDMA/133 [ 0.654371] ata7.00: configured for UDMA/100 [ 0.656998] scsi 6:0:0:0: CD-ROM TSSTcorp CDDVDW SH-224DB SB00 PQ: 0 ANSI: 5 [ 0.657034] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.673060] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 0.699565] sr 6:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.700781] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.702025] sr 6:0:0:0: Attached scsi CD-ROM sr0 [ 0.702159] sr 6:0:0:0: Attached scsi generic sg6 type 5 [ 0.703544] scsi 8:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5 [ 0.704862] sd 8:0:0:0: [sdg] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 0.704876] sd 8:0:0:0: Attached scsi generic sg7 type 0 [ 0.704939] scsi 9:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5 [ 0.705038] sd 9:0:0:0: Attached scsi generic sg8 type 0 [ 0.705104] sd 9:0:0:0: [sdh] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 0.705105] sd 9:0:0:0: [sdh] 4096-byte physical blocks [ 0.705113] sd 9:0:0:0: [sdh] Write Protect is off [ 0.705114] sd 9:0:0:0: [sdh] Mode Sense: 00 3a 00 00 [ 0.705130] sd 9:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.714111] sd 8:0:0:0: [sdg] 4096-byte physical blocks [ 0.715276] sd 8:0:0:0: [sdg] Write Protect is off [ 0.716399] sd 8:0:0:0: [sdg] Mode Sense: 00 3a 00 00 [ 0.716407] sd 8:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.753673] sdh: sdh1 sdh9 [ 0.755384] sd 9:0:0:0: [sdh] Attached SCSI removable disk [ 0.773196] random: fast init done [ 0.774584] sdg: sdg1 sdg9 [ 0.775914] sd 8:0:0:0: [sdg] Attached SCSI removable disk [ 0.785417] usb 1-1: New USB device found, idVendor=8087, idProduct=8008 [ 0.786673] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.788002] hub 1-1:1.0: USB hub found [ 0.789293] hub 1-1:1.0: 6 ports detected [ 0.803424] usb 2-1: New USB device found, idVendor=8087, idProduct=8000 [ 0.804975] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.806782] hub 2-1:1.0: USB hub found [ 0.808423] hub 2-1:1.0: 8 ports detected [ 1.012924] ata12: SATA link down (SStatus 0 SControl 300) [ 1.014768] md: Waiting for all devices to be available before autodetect [ 1.016571] md: If you don't use raid, use raid=noautodetect [ 1.018501] md: Autodetecting RAID arrays. [ 1.020287] md: autorun ... [ 1.022064] md: ... autorun DONE. [ 1.027641] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 1.028821] VFS: Mounted root (ext4 filesystem) readonly on device 8:4. [ 1.030554] devtmpfs: mounted [ 1.032173] Freeing unused kernel memory: 1376K [ 1.042077] Write protecting the kernel read-only data: 18432k [ 1.043598] Freeing unused kernel memory: 2008K [ 1.045985] Freeing unused kernel memory: 992K [ 1.091653] kbd_mode (1583) used greatest stack depth: 13896 bytes left [ 1.098310] loadkeys (1584) used greatest stack depth: 13696 bytes left [ 1.099861] init-early.sh (1580) used greatest stack depth: 13440 bytes left [ 1.119047] tsc: Refined TSC clocksource calibration: 3398.030 MHz [ 1.120245] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30fb0a05005, max_idle_ns: 440795375639 ns [ 1.343621] random: lvm: uninitialized urandom read (4 bytes read) [ 1.667912] random: crng init done [ 1.724623] udevd[2055]: starting version 3.2.5 [ 1.736386] udevd[2055]: invalid key/value pair in file /usr/lib64/udev/rules.d/61-gdm.rules on line 2, starting at character 175 ('[') [ 1.755063] udevd[2056]: starting eudev-3.2.5 [ 1.801472] e1000e 0000:00:19.0 eno1: renamed from eth0 [ 1.810598] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20170728/utaddress-247) [ 1.810603] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.810605] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170728/utaddress-247) [ 1.810608] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.810608] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170728/utaddress-247) [ 1.810611] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170728/utaddress-247) [ 1.810614] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.810614] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170728/utaddress-247) [ 1.810617] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170728/utaddress-247) [ 1.810620] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.810620] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 1.812759] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.813137] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.814235] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810 [ 1.814238] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.814306] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.814308] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.814309] usb usb3: Product: xHCI Host Controller [ 1.814310] usb usb3: Manufacturer: Linux 4.14.51-gentoo xhci-hcd [ 1.814311] usb usb3: SerialNumber: 0000:00:14.0 [ 1.814398] hub 3-0:1.0: USB hub found [ 1.814417] hub 3-0:1.0: 14 ports detected [ 1.815854] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.815880] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 1.815882] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 1.815910] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.815912] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.815913] usb usb4: Product: xHCI Host Controller [ 1.815914] usb usb4: Manufacturer: Linux 4.14.51-gentoo xhci-hcd [ 1.815915] usb usb4: SerialNumber: 0000:00:14.0 [ 1.815978] hub 4-0:1.0: USB hub found [ 1.815988] hub 4-0:1.0: 6 ports detected [ 1.822758] ath9k 0000:03:00.0: enabling device (0000 -> 0002) [ 1.831611] ath: EEPROM regdomain: 0x60 [ 1.831612] ath: EEPROM indicates we should expect a direct regpair map [ 1.831614] ath: Country alpha2 being used: 00 [ 1.831614] ath: Regpair used: 0x60 [ 1.832150] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 1.832360] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffc90003800000, irq=17 [ 1.834221] [drm] radeon kernel modesetting enabled. [ 1.834271] radeon 0000:01:00.0: enabling device (0000 -> 0003) [ 1.834519] [drm] initializing kernel modesetting (TAHITI 0x1002:0x6798 0x148C:0x3001 0x00). [ 1.855469] spl: loading out-of-tree module taints kernel. [ 1.858685] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) [ 1.858815] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002) [ 1.859268] SPL: Loaded module v0.7.9-r0-gentoo [ 1.861685] znvpair: module license 'CDDL' taints kernel. [ 1.861686] Disabling lock debugging due to kernel taint [ 1.864452] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0 [ 1.870045] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops 0xffffffff81e9bd60) [ 1.900426] snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000 [ 1.901483] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 1.901488] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 1.901489] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 1.901490] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 1.901491] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e [ 1.901495] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 1.901496] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 1.901497] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 1.901498] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 2.800393] clocksource: Switched to clocksource tsc [ 2.800396] ATOM BIOS: Tahiti [ 2.800412] [drm] GPU not posted. posting now... [ 2.812367] [drm] Changing default dispclk from 500Mhz to 600Mhz [ 2.812379] radeon 0000:01:00.0: VRAM: 3072M 0x0000000000000000 - 0x00000000BFFFFFFF (3072M used) [ 2.812380] radeon 0000:01:00.0: GTT: 2048M 0x00000000C0000000 - 0x000000013FFFFFFF [ 2.812389] [drm] Detected VRAM RAM=3072M, BAR=256M [ 2.812389] [drm] RAM width 384bits DDR [ 2.812421] [TTM] Zone kernel: Available graphics memory: 12212692 kiB [ 2.812421] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 2.812422] [TTM] Initializing pool allocator [ 2.812425] [TTM] Initializing DMA pool allocator [ 2.812438] [drm] radeon: 3072M of VRAM memory ready [ 2.812439] [drm] radeon: 2048M of GTT memory ready. [ 2.812443] [drm] Loading tahiti Microcode [ 2.820349] [drm] Internal thermal controller with fan control [ 2.820408] [drm] probing gen 2 caps for device 8086:c01 = 261ad03/e [ 2.825385] [drm] radeon: dpm initialized [ 2.827558] [drm] Found VCE firmware/feedback version 50.0.1 / 17! [ 2.827615] [drm] GART: num cpu pages 524288, num gpu pages 524288 [ 2.828323] [drm] probing gen 2 caps for device 8086:c01 = 261ad03/e [ 2.828324] [drm] PCIE gen 3 link speeds already enabled [ 2.834704] [drm] PCIE GART of 2048M enabled (table at 0x00000000001D6000). [ 2.834795] radeon 0000:01:00.0: WB enabled [ 2.834797] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000c0000c00 and cpu addr 0xffff880606074c00 [ 2.834798] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x00000000c0000c04 and cpu addr 0xffff880606074c04 [ 2.834799] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x00000000c0000c08 and cpu addr 0xffff880606074c08 [ 2.834800] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x00000000c0000c0c and cpu addr 0xffff880606074c0c [ 2.834800] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x00000000c0000c10 and cpu addr 0xffff880606074c10 [ 2.834998] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc9000ae35a18 [ 2.855121] radeon 0000:01:00.0: fence driver on ring 6 use gpu addr 0x00000000c0000c18 and cpu addr 0xffff880606074c18 [ 2.855122] radeon 0000:01:00.0: fence driver on ring 7 use gpu addr 0x00000000c0000c1c and cpu addr 0xffff880606074c1c [ 2.855123] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.855124] [drm] Driver supports precise vblank timestamp query. [ 2.855124] radeon 0000:01:00.0: radeon: MSI limited to 32-bit [ 2.855149] radeon 0000:01:00.0: radeon: using MSI. [ 2.855164] [drm] radeon: irq initialized. [ 2.879884] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card1/input8 [ 2.879911] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card1/input9 [ 2.879933] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card1/input10 [ 2.879954] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card1/input11 [ 2.924602] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3 [ 2.925108] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4 [ 2.925130] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 [ 2.925151] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 2.925172] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 2.925194] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 2.925217] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 2.925239] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 2.925260] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 2.999589] [drm] ring test on 0 succeeded in 1 usecs [ 2.999592] [drm] ring test on 1 succeeded in 1 usecs [ 2.999595] [drm] ring test on 2 succeeded in 1 usecs [ 2.999600] [drm] ring test on 3 succeeded in 3 usecs [ 2.999605] [drm] ring test on 4 succeeded in 3 usecs [ 3.017051] usb 3-1: new full-speed USB device number 2 using xhci_hcd [ 3.147615] usb 3-1: New USB device found, idVendor=045e, idProduct=07b2 [ 3.147616] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.147617] usb 3-1: Product: Microsoft® 2.4GHz Transceiver v8.0 [ 3.147618] usb 3-1: Manufacturer: Microsoft [ 3.147976] udevd (2107) used greatest stack depth: 12872 bytes left [ 3.151265] udevd[2056]: invalid key/value pair in file /usr/lib64/udev/rules.d/61-gdm.rules on line 2, starting at character 175 ('[') [ 3.152142] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:045E:07B2.0001/input/input16 [ 3.186679] [drm] ring test on 5 succeeded in 2 usecs [ 3.186681] [drm] UVD initialized successfully. [ 3.204140] hid-generic 0003:045E:07B2.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-0000:00:14.0-1/input0 [ 3.208112] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/0003:045E:07B2.0002/input/input17 [ 3.208171] hid-generic 0003:045E:07B2.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-0000:00:14.0-1/input1 [ 3.213573] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.2/0003:045E:07B2.0003/input/input18 [ 3.257121] usb 4-3: new SuperSpeed USB device number 2 using xhci_hcd [ 3.265128] hid-generic 0003:045E:07B2.0003: input,hiddev96,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-0000:00:14.0-1/input2 [ 3.296739] [drm] ring test on 6 succeeded in 22 usecs [ 3.296748] [drm] ring test on 7 succeeded in 4 usecs [ 3.296748] [drm] VCE initialized successfully. [ 3.296899] [drm] ib test on ring 0 succeeded in 0 usecs [ 3.296928] [drm] ib test on ring 1 succeeded in 0 usecs [ 3.296957] [drm] ib test on ring 2 succeeded in 0 usecs [ 3.296986] [drm] ib test on ring 3 succeeded in 0 usecs [ 3.297013] [drm] ib test on ring 4 succeeded in 0 usecs [ 3.305142] usb 4-3: New USB device found, idVendor=174c, idProduct=3074 [ 3.305143] usb 4-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 3.305144] usb 4-3: Product: ASM107x [ 3.305145] usb 4-3: Manufacturer: Asmedia [ 3.305146] usb 4-3: SerialNumber: 00000000A001 [ 3.305829] hub 4-3:1.0: USB hub found [ 3.305956] hub 4-3:1.0: 4 ports detected [ 3.383052] usb 3-3: new high-speed USB device number 3 using xhci_hcd [ 3.510819] usb 3-3: New USB device found, idVendor=174c, idProduct=2074 [ 3.510820] usb 3-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 3.510821] usb 3-3: Product: ASM107x [ 3.510821] usb 3-3: Manufacturer: Asmedia [ 3.510822] usb 3-3: SerialNumber: 00000000A001 [ 3.511205] hub 3-3:1.0: USB hub found [ 3.511359] hub 3-3:1.0: 4 ports detected [ 3.626050] usb 3-4: new full-speed USB device number 4 using xhci_hcd [ 3.753236] usb 3-4: string descriptor 0 read error: -22 [ 3.753238] usb 3-4: New USB device found, idVendor=0b05, idProduct=17d0 [ 3.753239] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.867050] usb 3-13: new full-speed USB device number 5 using xhci_hcd [ 3.975078] [drm] ib test on ring 5 succeeded [ 3.995228] usb 3-13: New USB device found, idVendor=046d, idProduct=c52b [ 3.995229] usb 3-13: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.995230] usb 3-13: Product: USB Receiver [ 3.995231] usb 3-13: Manufacturer: Logitech [ 3.996828] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13:1.0/0003:046D:C52B.0004/input/input19 [ 4.048160] hid-generic 0003:046D:C52B.0004: input,hidraw3: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-13/input0 [ 4.049853] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13:1.1/0003:046D:C52B.0005/input/input20 [ 4.101141] hid-generic 0003:046D:C52B.0005: input,hiddev97,hidraw4: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-13/input1 [ 4.102341] hid-generic 0003:046D:C52B.0006: hiddev98,hidraw5: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-13/input2 [ 4.147735] ZFS: Loaded module v0.7.9-r0-gentoo, ZFS pool version 5000, ZFS filesystem version 5 [ 4.216070] usb 3-14: new full-speed USB device number 6 using xhci_hcd [ 4.344307] usb 3-14: New USB device found, idVendor=046d, idProduct=c52b [ 4.344308] usb 3-14: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.344309] usb 3-14: Product: USB Receiver [ 4.344310] usb 3-14: Manufacturer: Logitech [ 4.346018] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.0/0003:046D:C52B.0007/input/input21 [ 4.398152] hid-generic 0003:046D:C52B.0007: input,hidraw6: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-14/input0 [ 4.399796] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.1/0003:046D:C52B.0008/input/input22 [ 4.451139] hid-generic 0003:046D:C52B.0008: input,hiddev99,hidraw7: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-14/input1 [ 4.452338] hid-generic 0003:046D:C52B.0009: hiddev100,hidraw8: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-14/input2 [ 4.479083] [drm] ib test on ring 6 succeeded [ 4.479643] udevd[2285]: Error calling EVIOCSKEYCODE on device node '/dev/input/event19' (scan code 0xc00b8, key code 161): Invalid argument [ 4.479650] udevd[2285]: Error calling EVIOCSKEYCODE on device node '/dev/input/event19' (scan code 0xc0183, key code 226): Invalid argument [ 4.479657] udevd[2285]: Error calling EVIOCSKEYCODE on device node '/dev/input/event19' (scan code 0xc0184, key code 421): Invalid argument [ 4.479663] udevd[2285]: Error calling EVIOCSKEYCODE on device node '/dev/input/event19' (scan code 0xc0186, key code 423): Invalid argument [ 4.479670] udevd[2285]: Error calling EVIOCSKEYCODE on device node '/dev/input/event19' (scan code 0xc018a, key code 155): Invalid argument [ 4.479676] udevd[2285]: Error calling EVIOCSKEYCODE on device node '/dev/input/event19' (scan code 0xc018e, key code 397): Invalid argument [ 4.479682] udevd[2285]: Error calling EVIOCSKEYCODE on device node '/dev/input/event19' (scan code 0xc01b6, key code 212): Invalid argument [ 4.983126] [drm] ib test on ring 7 succeeded [ 4.983630] [drm] Radeon Display Connectors [ 4.983631] [drm] Connector 0: [ 4.983632] [drm] DP-2 [ 4.983633] [drm] HPD5 [ 4.983635] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c [ 4.983636] [drm] Encoders: [ 4.983637] [drm] DFP1: INTERNAL_UNIPHY2 [ 4.983638] [drm] Connector 1: [ 4.983639] [drm] DP-3 [ 4.983640] [drm] HPD4 [ 4.983642] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c [ 4.983642] [drm] Encoders: [ 4.983643] [drm] DFP2: INTERNAL_UNIPHY2 [ 4.983644] [drm] Connector 2: [ 4.983645] [drm] HDMI-A-4 [ 4.983646] [drm] HPD1 [ 4.983648] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c [ 4.983649] [drm] Encoders: [ 4.983650] [drm] DFP3: INTERNAL_UNIPHY1 [ 4.983650] [drm] Connector 3: [ 4.983651] [drm] DVI-I-1 [ 4.983652] [drm] HPD3 [ 4.983654] [drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c [ 4.983655] [drm] Encoders: [ 4.983656] [drm] DFP4: INTERNAL_UNIPHY [ 4.983657] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 5.044383] [drm] Cannot find any crtc or sizes [ 5.044768] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 1 [ 5.044901] snd_hda_intel 0000:01:00.1: Force to non-snoop mode [ 5.044951] vfio_pci: add [1002:6798[ffff:ffff]] class 0x000000/00000000 [ 5.044961] vfio_pci: add [1002:aaa0[ffff:ffff]] class 0x000000/00000000 [ 5.045382] udevd (2098) used greatest stack depth: 12576 bytes left [ 5.051775] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input23 [ 5.051865] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input24 [ 5.051946] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input25 [ 5.052040] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input26 [ 5.052132] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input27 [ 5.052221] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input28 [ 5.494184] EXT4-fs (sda4): re-mounted. Opts: (null) [ 5.536204] Adding 8000508k swap on /dev/sda6. Priority:-2 extents:1 across:8000508k SS [ 6.102380] [drm] Cannot find any crtc or sizes [ 8.635229] zpool (2681) used greatest stack depth: 12296 bytes left [ 9.959072] elogind[4339]: New seat seat0. [ 9.959497] elogind[4339]: Watching system buttons on /dev/input/event1 (Power Button) [ 9.977130] elogind[4339]: Watching system buttons on /dev/input/event0 (Power Button) [ 9.977171] elogind[4339]: Watching system buttons on /dev/input/event16 (Microsoft Microsoft® 2.4GHz Transceiver v8.0) [ 9.977209] elogind[4339]: Watching system buttons on /dev/input/event18 (Microsoft Microsoft® 2.4GHz Transceiver v8.0) [ 9.977246] elogind[4339]: Watching system buttons on /dev/input/event19 (Logitech USB Receiver) [ 9.977282] elogind[4339]: Watching system buttons on /dev/input/event20 (Logitech USB Receiver) [ 9.977332] elogind[4339]: Watching system buttons on /dev/input/event21 (Logitech USB Receiver) [ 9.977387] elogind[4339]: Watching system buttons on /dev/input/event22 (Logitech USB Receiver) [ 11.607125] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [ 12.204925] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 12.225250] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 12.225357] NFSD: starting 90-second grace period (net ffffffff822f6e80) [ 12.480761] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 12.487281] elogind[4339]: New session c1 of user gdm. [ 12.493020] br0: port 1(eno1) entered blocking state [ 12.493021] br0: port 1(eno1) entered disabled state [ 12.493078] device eno1 entered promiscuous mode [ 12.496158] device br0 entered promiscuous mode [ 12.497154] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready [ 12.509418] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready [ 12.732038] radeon_dp_aux_transfer_native: 158 callbacks suppressed [ 12.749997] Ebtables v2.0 registered [ 14.545097] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 14.545143] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready [ 14.545162] br0: port 1(eno1) entered blocking state [ 14.545163] br0: port 1(eno1) entered forwarding state [ 14.545200] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready [ 20.972647] elogind[4339]: New session 2 of user richard. [ 21.428064] radeon_dp_aux_transfer_native: 158 callbacks suppressed [ 23.083742] rfkill: input handler disabled