[ 0.000000] Linux version 4.12.12-gentoo (root@richard-desktop) (gcc version 5.4.0 (Gentoo 5.4.0-r3 p1.3, pie-0.6.5) ) #1 SMP Thu Sep 14 15:11:35 CEST 2017 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.12.12-gentoo root=UUID=815ccc15-9b3e-44e2-8945-09686d68f1a6 ro [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a8800fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a8801000-0x00000000a8807fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000a8808000-0x00000000a8c54fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a8c55000-0x00000000a90a5fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000a90a6000-0x00000000bc661fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bc662000-0x00000000bc869fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bc86a000-0x00000000bc87ffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bc880000-0x00000000bcdc1fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bcdc2000-0x00000000bdf5bfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bdf5c000-0x00000000bdffefff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000bdfff000-0x00000000bdffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf000000-0x00000000cf1fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.31 by American Megatrends [ 0.000000] efi: ESRT=0xbdf5a818 ACPI=0xbc86e000 ACPI 2.0=0xbc86e000 SMBIOS=0xf04c0 MPS=0xfd500 [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: ASUS All Series/Z87-PRO, BIOS 1405 08/19/2013 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x22fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D7FFF write-protect [ 0.000000] D8000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7E00000000 write-back [ 0.000000] 1 base 0200000000 mask 7FE0000000 write-back [ 0.000000] 2 base 0220000000 mask 7FF0000000 write-back [ 0.000000] 3 base 00C0000000 mask 7FC0000000 uncachable [ 0.000000] 4 base 00BF000000 mask 7FFF000000 uncachable [ 0.000000] 5 base 022FE00000 mask 7FFFE00000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: update [mem 0xbf000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xbe000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fd7f0-0x000fd7ff] mapped at [ffff8800000fd7f0] [ 0.000000] esrt: Reserving ESRT space from 0x00000000bdf5a818 to 0x00000000bdf5a850. [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x0277d000, 0x0277dfff] PGTABLE [ 0.000000] BRK [0x0277e000, 0x0277efff] PGTABLE [ 0.000000] BRK [0x0277f000, 0x0277ffff] PGTABLE [ 0.000000] BRK [0x02780000, 0x02780fff] PGTABLE [ 0.000000] BRK [0x02781000, 0x02781fff] PGTABLE [ 0.000000] BRK [0x02782000, 0x02782fff] PGTABLE [ 0.000000] Secure boot could not be determined [ 0.000000] RAMDISK: [mem 0x37a21000-0x37d07fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000BC86E000 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000BC86E080 000074 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000BC87AE78 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000BC86E188 00CCED (v02 ALASKA A M I 00000024 INTL 20091112) [ 0.000000] ACPI: FACS 0x00000000BCDC0080 000040 [ 0.000000] ACPI: APIC 0x00000000BC87AF88 000092 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000BC87B020 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 0x00000000BC87B068 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.000000] ACPI: SSDT 0x00000000BC87B5A8 000AD8 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: MCFG 0x00000000BC87C080 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000BC87C0C0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000BC87C0F8 00036D (v01 SataRe SataTabl 00001000 INTL 20091112) [ 0.000000] ACPI: SSDT 0x00000000BC87C468 00329E (v01 SaSsdt SaSsdt 00003000 INTL 20091112) [ 0.000000] ACPI: BGRT 0x00000000BC87F760 000038 (v00 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022fdfffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x22fdf8000-0x22fdfbfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000022fdfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000a8800fff] [ 0.000000] node 0: [mem 0x00000000a8808000-0x00000000a8c54fff] [ 0.000000] node 0: [mem 0x00000000a90a6000-0x00000000bc661fff] [ 0.000000] node 0: [mem 0x00000000bdfff000-0x00000000bdffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000022fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000022fdfffff] [ 0.000000] On node 0 totalpages: 2015144 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 43 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 11977 pages used for memmap [ 0.000000] DMA32 zone: 766475 pages, LIFO batch:31 [ 0.000000] Normal zone: 19448 pages used for memmap [ 0.000000] Normal zone: 1244672 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at 0x00000000bf200000-0x00000000cf1fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xa8801000-0xa8807fff] [ 0.000000] PM: Registered nosave memory: [mem 0xa8c55000-0xa90a5fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbc662000-0xbc869fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbc86a000-0xbc87ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbc880000-0xbcdc1fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbcdc2000-0xbdf5bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbdf5c000-0xbdffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xbe000000-0xbeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf000000-0xcf1fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcf200000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xcf200000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 38 pages/cpu @ffff88022fa00000 s115992 r8192 d31464 u262144 [ 0.000000] pcpu-alloc: s115992 r8192 d31464 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1983612 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.12.12-gentoo root=UUID=815ccc15-9b3e-44e2-8945-09686d68f1a6 ro [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 7619068K/8060576K available (9973K kernel code, 1353K rwdata, 3060K rodata, 1356K init, 724K bss, 441508K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS:4352 nr_irqs:488 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.001000] tsc: Detected 3499.862 MHz processor [ 0.001000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6999.72 BogoMIPS (lpj=3499862) [ 0.001000] pid_max: default: 32768 minimum: 301 [ 0.001000] ACPI: Core revision 20170303 [ 0.006286] ACPI: 5 ACPI AML tables successfully acquired and loaded [ 0.006803] Security Framework initialized [ 0.006806] SELinux: Initializing. [ 0.006813] SELinux: Starting in permissive mode [ 0.007044] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.008038] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.008475] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.008481] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.008619] CPU: Physical Processor ID: 0 [ 0.008621] CPU: Processor Core ID: 0 [ 0.008625] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.008627] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.008631] mce: CPU supports 9 MCE banks [ 0.008639] CPU0: Thermal monitoring enabled (TM1) [ 0.008649] process: using mwait in idle threads [ 0.008653] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.008654] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.008776] Freeing SMP alternatives memory: 36K [ 0.014472] smpboot: Max logical packages: 2 [ 0.014831] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.024840] TSC deadline timer enabled [ 0.024841] smpboot: CPU0: Intel(R) Core(TM) i7-4770K CPU @ 3.50GHz (family: 0x6, model: 0x3c, stepping: 0x3) [ 0.024881] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.024908] ... version: 3 [ 0.024909] ... bit width: 48 [ 0.024911] ... generic registers: 4 [ 0.024913] ... value mask: 0000ffffffffffff [ 0.024915] ... max period: 00007fffffffffff [ 0.024916] ... fixed-purpose events: 3 [ 0.024918] ... event mask: 000000070000000f [ 0.025000] smp: Bringing up secondary CPUs ... [ 0.025000] x86: Booting SMP configuration: [ 0.025000] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.444012] smp: Brought up 1 node, 8 CPUs [ 0.444012] smpboot: Total of 8 processors activated (56027.16 BogoMIPS) [ 0.445054] sched_clock: Marking stable (445000000, 0)->(459202673, -14202673) [ 0.445258] devtmpfs: initialized [ 0.445362] PM: Registering ACPI NVS region [mem 0xa8801000-0xa8807fff] (28672 bytes) [ 0.445366] PM: Registering ACPI NVS region [mem 0xbc880000-0xbcdc1fff] (5513216 bytes) [ 0.445435] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.445446] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.445451] kworker/u16:0 (50) used greatest stack depth: 14056 bytes left [ 0.445501] RTC time: 9:12:59, date: 11/16/17 [ 0.445559] NET: Registered protocol family 16 [ 0.445680] cpuidle: using governor menu [ 0.445684] PCCT header not found. [ 0.445711] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.445714] ACPI: bus type PCI registered [ 0.445747] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.445751] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.445756] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override. [ 0.445807] PCI: Using configuration type 1 for base access [ 0.445846] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.447957] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.448042] ACPI: Added _OSI(Module Device) [ 0.448044] ACPI: Added _OSI(Processor Device) [ 0.448046] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.448048] ACPI: Added _OSI(Processor Aggregator Device) [ 0.448150] ACPI: Executed 1 blocks of module-level executable AML code [ 0.450507] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.450798] ACPI: Dynamic OEM Table Load: [ 0.450804] ACPI: SSDT 0xFFFF880225E59800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.451011] ACPI: Dynamic OEM Table Load: [ 0.451018] ACPI: SSDT 0xFFFF880225E80000 0005AA (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.451237] ACPI: Dynamic OEM Table Load: [ 0.451242] ACPI: SSDT 0xFFFF880225E7C000 000119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.452148] ACPI: Interpreter enabled [ 0.452166] ACPI: (supports S0 S3 S4 S5) [ 0.452168] ACPI: Using IOAPIC for interrupt routing [ 0.452186] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.457408] ACPI: Power Resource [FN00] (off) [ 0.457453] ACPI: Power Resource [FN01] (off) [ 0.457495] ACPI: Power Resource [FN02] (off) [ 0.457537] ACPI: Power Resource [FN03] (off) [ 0.457578] ACPI: Power Resource [FN04] (off) [ 0.458085] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.458090] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.458221] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME] [ 0.458294] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability] [ 0.458296] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.458450] PCI host bridge to bus 0000:00 [ 0.458453] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.458455] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.458457] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.458460] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.458463] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.458466] pci_bus 0000:00: root bus resource [mem 0xcf200000-0xfeafffff window] [ 0.458469] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.458476] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000 [ 0.458531] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400 [ 0.458555] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.458606] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.458625] pci 0000:00:01.1: [8086:0c05] type 01 class 0x060400 [ 0.458648] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.458690] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000 [ 0.458696] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit] [ 0.458700] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.458702] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.458751] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 [ 0.458755] pci 0000:00:03.0: reg 0x10: [mem 0xf7c34000-0xf7c37fff 64bit] [ 0.458819] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.458832] pci 0000:00:14.0: reg 0x10: [mem 0xf7c20000-0xf7c2ffff 64bit] [ 0.458878] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.458904] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.458925] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.458938] pci 0000:00:16.0: reg 0x10: [mem 0xf7c3f000-0xf7c3f00f 64bit] [ 0.458988] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.459038] pci 0000:00:19.0: [8086:153b] type 00 class 0x020000 [ 0.459049] pci 0000:00:19.0: reg 0x10: [mem 0xf7c00000-0xf7c1ffff] [ 0.459055] pci 0000:00:19.0: reg 0x14: [mem 0xf7c3d000-0xf7c3dfff] [ 0.459061] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f] [ 0.459106] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.459133] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.459154] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.459167] pci 0000:00:1a.0: reg 0x10: [mem 0xf7c3c000-0xf7c3c3ff] [ 0.459235] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.459270] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.459292] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 [ 0.459303] pci 0000:00:1b.0: reg 0x10: [mem 0xf7c30000-0xf7c33fff 64bit] [ 0.459350] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.459378] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.459397] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.459447] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.459494] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.459514] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.459565] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.459609] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.459631] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400 [ 0.459682] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.459726] pci 0000:00:1c.5: System wakeup disabled by ACPI [ 0.459748] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.459762] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c3b000-0xf7c3b3ff] [ 0.459830] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.459865] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.459886] pci 0000:00:1f.0: [8086:8c44] type 00 class 0x060100 [ 0.460010] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.460019] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7] [ 0.460026] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3] [ 0.460031] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7] [ 0.460036] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3] [ 0.460041] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.460047] pci 0000:00:1f.2: reg 0x24: [mem 0xf7c3a000-0xf7c3a7ff] [ 0.460073] pci 0000:00:1f.2: PME# supported from D3hot [ 0.460113] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.460123] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c39000-0xf7c390ff 64bit] [ 0.460138] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.460207] pci 0000:01:00.0: [1002:6798] type 00 class 0x030000 [ 0.460216] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.460220] pci 0000:01:00.0: reg 0x18: [mem 0xf7b00000-0xf7b3ffff 64bit] [ 0.460223] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 0.460228] pci 0000:01:00.0: reg 0x30: [mem 0xf7b40000-0xf7b5ffff pref] [ 0.460254] pci 0000:01:00.0: supports D1 D2 [ 0.460254] pci 0000:01:00.0: PME# supported from D1 D2 D3hot [ 0.460265] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.460284] pci 0000:01:00.1: [1002:aaa0] type 00 class 0x040300 [ 0.460292] pci 0000:01:00.1: reg 0x10: [mem 0xf7b60000-0xf7b63fff 64bit] [ 0.460329] pci 0000:01:00.1: supports D1 D2 [ 0.463049] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.463053] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.463054] pci 0000:00:01.0: bridge window [mem 0xf7b00000-0xf7bfffff] [ 0.463056] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.463077] pci 0000:02:00.0: [1b4b:9235] type 00 class 0x010601 [ 0.463085] pci 0000:02:00.0: reg 0x10: [io 0xd050-0xd057] [ 0.463089] pci 0000:02:00.0: reg 0x14: [io 0xd040-0xd043] [ 0.463094] pci 0000:02:00.0: reg 0x18: [io 0xd030-0xd037] [ 0.463098] pci 0000:02:00.0: reg 0x1c: [io 0xd020-0xd023] [ 0.463103] pci 0000:02:00.0: reg 0x20: [io 0xd000-0xd01f] [ 0.463107] pci 0000:02:00.0: reg 0x24: [mem 0xf7a40000-0xf7a407ff] [ 0.463112] pci 0000:02:00.0: reg 0x30: [mem 0xf7a00000-0xf7a3ffff pref] [ 0.463137] pci 0000:02:00.0: PME# supported from D3hot [ 0.466056] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.466059] pci 0000:00:01.1: bridge window [io 0xd000-0xdfff] [ 0.466060] pci 0000:00:01.1: bridge window [mem 0xf7a00000-0xf7afffff] [ 0.466086] pci 0000:00:1c.0: PCI bridge to [bus 03] [ 0.466130] pci 0000:04:00.0: [168c:0034] type 00 class 0x028000 [ 0.466152] pci 0000:04:00.0: reg 0x10: [mem 0xf7900000-0xf797ffff 64bit] [ 0.466185] pci 0000:04:00.0: reg 0x30: [mem 0xf7980000-0xf798ffff pref] [ 0.466247] pci 0000:04:00.0: supports D1 D2 [ 0.466247] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.466272] pci 0000:04:00.0: System wakeup disabled by ACPI [ 0.469069] pci 0000:00:1c.1: PCI bridge to [bus 04] [ 0.469074] pci 0000:00:1c.1: bridge window [mem 0xf7900000-0xf79fffff] [ 0.469113] pci 0000:05:00.0: [1b21:0612] type 00 class 0x010601 [ 0.469129] pci 0000:05:00.0: reg 0x10: [io 0xc050-0xc057] [ 0.469138] pci 0000:05:00.0: reg 0x14: [io 0xc040-0xc043] [ 0.469147] pci 0000:05:00.0: reg 0x18: [io 0xc030-0xc037] [ 0.469156] pci 0000:05:00.0: reg 0x1c: [io 0xc020-0xc023] [ 0.469165] pci 0000:05:00.0: reg 0x20: [io 0xc000-0xc01f] [ 0.469175] pci 0000:05:00.0: reg 0x24: [mem 0xf7800000-0xf78001ff] [ 0.469248] pci 0000:05:00.0: System wakeup disabled by ACPI [ 0.473076] pci 0000:00:1c.5: PCI bridge to [bus 05] [ 0.473080] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff] [ 0.473082] pci 0000:00:1c.5: bridge window [mem 0xf7800000-0xf78fffff] [ 0.473494] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.473525] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.473553] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 10 11 12 14 15) [ 0.473581] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.473609] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.473636] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 *15) [ 0.473664] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15) [ 0.473692] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15) [ 0.473915] ACPI: Enabled 5 GPEs in block 00 to 3F [ 0.473982] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.473985] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.473990] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 0.473993] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.473995] pci 0000:00:02.0: vgaarb: no bridge control possible [ 0.473997] vgaarb: loaded [ 0.474046] SCSI subsystem initialized [ 0.474080] libata version 3.00 loaded. [ 0.474107] ACPI: bus type USB registered [ 0.474123] usbcore: registered new interface driver usbfs [ 0.474133] usbcore: registered new interface driver hub [ 0.474149] usbcore: registered new device driver usb [ 0.474168] pps_core: LinuxPPS API ver. 1 registered [ 0.474171] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.474175] PTP clock support registered [ 0.474205] EDAC MC: Ver: 3.0.0 [ 0.474268] Registered efivars operations [ 0.477075] Advanced Linux Sound Architecture Driver Initialized. [ 0.477085] PCI: Using ACPI for IRQ routing [ 0.478194] PCI: pci_cache_line_size set to 64 bytes [ 0.478229] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.478230] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.478231] e820: reserve RAM buffer [mem 0xa8801000-0xabffffff] [ 0.478231] e820: reserve RAM buffer [mem 0xa8c55000-0xabffffff] [ 0.478232] e820: reserve RAM buffer [mem 0xbc662000-0xbfffffff] [ 0.478232] e820: reserve RAM buffer [mem 0xbe000000-0xbfffffff] [ 0.478233] e820: reserve RAM buffer [mem 0x22fe00000-0x22fffffff] [ 0.478339] NetLabel: Initializing [ 0.478342] NetLabel: domain hash size = 128 [ 0.478344] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.478354] NetLabel: unlabeled traffic allowed by default [ 0.478396] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.478401] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.480424] clocksource: Switched to clocksource hpet [ 0.485468] VFS: Disk quotas dquot_6.6.0 [ 0.485481] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.486487] pnp: PnP ACPI init [ 0.486545] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.486549] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.486649] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.486652] system 00:01: [io 0xffff] has been reserved [ 0.486654] system 00:01: [io 0xffff] has been reserved [ 0.486656] system 00:01: [io 0xffff] has been reserved [ 0.486658] system 00:01: [io 0x1c00-0x1cfe] has been reserved [ 0.486660] system 00:01: [io 0x1d00-0x1dfe] has been reserved [ 0.486662] system 00:01: [io 0x1e00-0x1efe] has been reserved [ 0.486664] system 00:01: [io 0x1f00-0x1ffe] has been reserved [ 0.486667] system 00:01: [io 0x1800-0x18fe] has been reserved [ 0.486669] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.486671] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.486684] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.486711] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.486714] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.486758] system 00:04: [io 0x0290-0x029f] has been reserved [ 0.486761] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.486789] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.486792] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.487040] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.487043] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.487045] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.487047] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.487050] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.487052] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.487054] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.487056] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.487059] system 00:06: [mem 0xff000000-0xffffffff] has been reserved [ 0.487061] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.487063] system 00:06: [mem 0xf7fef000-0xf7feffff] has been reserved [ 0.487066] system 00:06: [mem 0xf7ff0000-0xf7ff0fff] has been reserved [ 0.487068] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.487221] pnp: PnP ACPI: found 7 devices [ 0.491747] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.491772] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.491775] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.491778] pci 0000:00:01.0: bridge window [mem 0xf7b00000-0xf7bfffff] [ 0.491781] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.491785] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.491787] pci 0000:00:01.1: bridge window [io 0xd000-0xdfff] [ 0.491790] pci 0000:00:01.1: bridge window [mem 0xf7a00000-0xf7afffff] [ 0.491795] pci 0000:00:1c.0: PCI bridge to [bus 03] [ 0.491803] pci 0000:00:1c.1: PCI bridge to [bus 04] [ 0.491807] pci 0000:00:1c.1: bridge window [mem 0xf7900000-0xf79fffff] [ 0.491814] pci 0000:00:1c.5: PCI bridge to [bus 05] [ 0.491816] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff] [ 0.491820] pci 0000:00:1c.5: bridge window [mem 0xf7800000-0xf78fffff] [ 0.491827] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.491828] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.491829] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.491829] pci_bus 0000:00: resource 7 [mem 0x000d8000-0x000dbfff window] [ 0.491830] pci_bus 0000:00: resource 8 [mem 0x000dc000-0x000dffff window] [ 0.491831] pci_bus 0000:00: resource 9 [mem 0xcf200000-0xfeafffff window] [ 0.491831] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.491832] pci_bus 0000:01: resource 1 [mem 0xf7b00000-0xf7bfffff] [ 0.491832] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] [ 0.491833] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.491834] pci_bus 0000:02: resource 1 [mem 0xf7a00000-0xf7afffff] [ 0.491834] pci_bus 0000:04: resource 1 [mem 0xf7900000-0xf79fffff] [ 0.491835] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] [ 0.491836] pci_bus 0000:05: resource 1 [mem 0xf7800000-0xf78fffff] [ 0.491892] NET: Registered protocol family 2 [ 0.491991] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.492062] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.492160] TCP: Hash tables configured (established 65536 bind 65536) [ 0.492186] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.492203] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.492241] NET: Registered protocol family 1 [ 0.492297] RPC: Registered named UNIX socket transport module. [ 0.492300] RPC: Registered udp transport module. [ 0.492302] RPC: Registered tcp transport module. [ 0.492303] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.492312] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.524494] PCI: CLS 64 bytes, default 64 [ 0.524512] Unpacking initramfs... [ 0.731774] Freeing initrd memory: 2972K [ 0.731781] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.731784] software IO TLB [mem 0xaa2f8000-0xae2f8000] (64MB) mapped at [ffff8800aa2f8000-ffff8800ae2f7fff] [ 0.731863] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 0.731866] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 0.731868] RAPL PMU: hw unit of domain package 2^-14 Joules [ 0.731870] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 0.731871] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 0.732492] Scanning for low memory corruption every 60 seconds [ 0.732656] audit: initializing netlink subsys (disabled) [ 0.732687] audit: type=2000 audit(1510823579.732:1): state=initialized audit_enabled=0 res=1 [ 0.732983] workingset: timestamp_bits=56 max_order=21 bucket_order=0 [ 0.734194] NFS: Registering the id_resolver key type [ 0.734201] Key type id_resolver registered [ 0.734203] Key type id_legacy registered [ 0.734206] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.734256] SELinux: Registering netfilter hooks [ 0.734941] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.734944] io scheduler noop registered [ 0.734946] io scheduler deadline registered [ 0.734971] io scheduler cfq registered (default) [ 0.734972] io scheduler mq-deadline registered [ 0.734974] io scheduler kyber registered [ 0.735401] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.735663] Non-volatile memory driver v1.3 [ 0.735678] Linux agpgart interface v0.103 [ 0.735707] efifb: probing for efifb [ 0.735715] efifb: framebuffer at 0xd0000000, using 3072k, total 3072k [ 0.735717] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 0.735718] efifb: scrolling: redraw [ 0.735720] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.736763] Console: switching to colour frame buffer device 128x48 [ 0.737751] fb0: EFI VGA frame buffer device [ 0.737812] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.737832] ACPI: Power Button [PWRB] [ 0.737857] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.737874] ACPI: Power Button [PWRF] [ 0.738169] Monitor-Mwait will be used to enter C-1 state [ 0.738171] Monitor-Mwait will be used to enter C-2 state [ 0.738954] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 0.739049] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.739062] ACPI: Thermal Zone [TZ00] (28 C) [ 0.739194] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.739207] ACPI: Thermal Zone [TZ01] (30 C) [ 0.739229] xenfs: not registering filesystem on non-xen platform [ 0.739407] [drm] Memory usable by graphics device = 2048M [ 0.739421] checking generic (d0000000 300000) vs hw (d0000000 10000000) [ 0.739421] fb: switching to inteldrmfb from EFI VGA [ 0.739446] Console: switching to colour dummy device 80x25 [ 0.739485] [drm] Replacing VGA console driver [ 0.745483] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 0.745486] [drm] Driver supports precise vblank timestamp query. [ 0.747633] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem [ 0.749733] [drm] Initialized i915 1.6.0 20170403 for 0000:00:02.0 on minor 0 [ 0.750514] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 0.750785] acpi device:62: registered as cooling_device13 [ 0.750823] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2 [ 0.752056] loop: module loaded [ 0.752101] ahci 0000:00:1f.2: version 3.0 [ 0.752212] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.752216] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst [ 0.767795] scsi host0: ahci [ 0.767867] scsi host1: ahci [ 0.767931] scsi host2: ahci [ 0.767975] scsi host3: ahci [ 0.768016] scsi host4: ahci [ 0.768055] scsi host5: ahci [ 0.768074] ata1: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a100 irq 27 [ 0.768077] ata2: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a180 irq 27 [ 0.768080] ata3: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a200 irq 27 [ 0.768084] ata4: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a280 irq 27 [ 0.768087] ata5: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a300 irq 27 [ 0.768090] ata6: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a380 irq 27 [ 0.778236] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 0.778243] ahci 0000:02:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 0.778509] scsi host6: ahci [ 0.778571] scsi host7: ahci [ 0.778624] scsi host8: ahci [ 0.778677] scsi host9: ahci [ 0.778706] ata7: SATA max UDMA/133 abar m2048@0xf7a40000 port 0xf7a40100 irq 28 [ 0.778711] ata8: SATA max UDMA/133 abar m2048@0xf7a40000 port 0xf7a40180 irq 28 [ 0.778716] ata9: SATA max UDMA/133 abar m2048@0xf7a40000 port 0xf7a40200 irq 28 [ 0.778721] ata10: SATA max UDMA/133 abar m2048@0xf7a40000 port 0xf7a40280 irq 28 [ 0.778816] ahci 0000:05:00.0: SSS flag set, parallel bus scan disabled [ 0.778848] ahci 0000:05:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 0.778853] ahci 0000:05:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs [ 0.779018] scsi host10: ahci [ 0.779083] scsi host11: ahci [ 0.779120] ata11: SATA max UDMA/133 abar m512@0xf7800000 port 0xf7800100 irq 29 [ 0.779125] ata12: SATA max UDMA/133 abar m512@0xf7800000 port 0xf7800180 irq 29 [ 0.779185] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 0.779188] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.779200] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 0.779203] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.779216] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 0.779218] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.779321] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 0.859600] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 0.861432] fbcon: inteldrmfb (fb0) is primary device [ 0.918922] Console: switching to colour frame buffer device 320x90 [ 0.935596] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 0.941351] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) d8:50:e6:52:84:b3 [ 0.941371] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 0.941412] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 0.941436] sky2: driver version 1.30 [ 0.941517] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.941533] ehci-pci: EHCI PCI platform driver [ 0.941605] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.941670] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.941698] ehci-pci 0000:00:1a.0: debug port 2 [ 0.945615] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.945620] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c3c000 [ 0.952470] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.952505] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.952522] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.952538] usb usb1: Product: EHCI Host Controller [ 0.952550] usb usb1: Manufacturer: Linux 4.12.12-gentoo ehci_hcd [ 0.952564] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.952664] hub 1-0:1.0: USB hub found [ 0.952679] hub 1-0:1.0: 2 ports detected [ 0.952803] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.952867] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.952895] ehci-pci 0000:00:1d.0: debug port 2 [ 0.956785] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.956789] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c3b000 [ 0.963468] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.963500] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.963517] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.963533] usb usb2: Product: EHCI Host Controller [ 0.963545] usb usb2: Manufacturer: Linux 4.12.12-gentoo ehci_hcd [ 0.963558] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.963651] hub 2-0:1.0: USB hub found [ 0.963666] hub 2-0:1.0: 2 ports detected [ 0.963735] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.963754] ohci-pci: OHCI PCI platform driver [ 0.963771] uhci_hcd: USB Universal Host Controller Interface driver [ 0.963800] usbcore: registered new interface driver usblp [ 0.963822] usbcore: registered new interface driver usb-storage [ 0.963852] i8042: PNP: No PS/2 controller found. [ 0.963895] mousedev: PS/2 mouse device common for all mice [ 0.963979] rtc_cmos 00:02: RTC can wake from S4 [ 0.964082] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.964117] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.964213] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.964743] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 0.964767] intel_pstate: Intel P-state driver initializing [ 0.964881] EFI Variables Facility v0.08 2004-May-17 [ 0.970624] hidraw: raw HID events driver (C) Jiri Kosina [ 0.971082] usbcore: registered new interface driver usbhid [ 0.971139] usbhid: USB HID core driver [ 0.971786] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) [ 0.972123] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops 0xffffffff81a8e9c0) [ 0.972229] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002) [ 0.972770] snd_hda_intel 0000:01:00.1: Force to non-snoop mode [ 0.972905] Netfilter messages via NETLINK v0.30. [ 0.973198] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 0.973342] ctnetlink v0.93: registering with nfnetlink. [ 0.973719] ip_tables: (C) 2000-2006 Netfilter Core Team [ 0.973810] Initializing XFRM netlink socket [ 0.974089] NET: Registered protocol family 10 [ 0.974593] Segment Routing with IPv6 [ 0.977356] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 0.978421] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.979530] NET: Registered protocol family 17 [ 0.981052] Key type dns_resolver registered [ 0.982683] snd_hda_codec_realtek hdaudioC1D0: ALC1150: SKU not ready 0x00000000 [ 0.984219] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC1150: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 0.985209] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 0.986190] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 0.987169] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 0.988007] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x1e [ 0.988823] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 0.989864] microcode: sig=0x306c3, pf=0x2, revision=0x9 [ 0.991245] microcode: Microcode Update Driver: v2.2. [ 0.991330] registered taskstats version 1 [ 0.991352] random: fast init done [ 0.991500] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 [ 0.991501] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 [ 0.991502] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a [ 0.991654] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input3 [ 0.991702] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input4 [ 0.991749] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input5 [ 0.991793] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input6 [ 1.003910] Magic number: 9:354:222 [ 1.005328] console [netcon0] enabled [ 1.006601] netconsole: network logging started [ 1.007912] PM: Hibernation image not present or could not be loaded. [ 1.007914] ALSA device list: [ 1.007949] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7 [ 1.008566] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8 [ 1.008606] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9 [ 1.008643] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10 [ 1.008680] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11 [ 1.008716] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12 [ 1.008753] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13 [ 1.008790] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14 [ 1.008829] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15 [ 1.012757] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input16 [ 1.012796] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input17 [ 1.012835] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input18 [ 1.012870] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input19 [ 1.012905] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input20 [ 1.012940] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input21 [ 1.022749] #0: HDA Intel HDMI at 0xf7c34000 irq 32 [ 1.023880] #1: HDA Intel PCH at 0xf7c30000 irq 31 [ 1.025013] #2: HDA ATI HDMI at 0xf7b60000 irq 33 [ 1.077049] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.078024] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.079694] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.082057] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.084076] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.085788] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.086038] ata11: SATA link down (SStatus 0 SControl 300) [ 1.086039] ata8: SATA link down (SStatus 0 SControl 300) [ 1.089958] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170303/psargs-364) [ 1.091155] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff8802274c64b0), AE_NOT_FOUND (20170303/psparse-543) [ 1.092058] ata5.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133 [ 1.093361] ata5.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.094659] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170303/psargs-364) [ 1.095426] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT2._GTF] (Node ffff8802274c63c0), AE_NOT_FOUND (20170303/psparse-543) [ 1.096246] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170303/psargs-364) [ 1.097588] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT5._GTF] (Node ffff8802274c6528), AE_NOT_FOUND (20170303/psparse-543) [ 1.098489] ata1.00: supports DRM functions and may not be fully accessible [ 1.099884] ata6.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133 [ 1.100715] ata6.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.101612] ata2.00: ATA-9: WDC WD30EFRX-68EUZN0, 80.00A80, max UDMA/133 [ 1.102799] ata2.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.104167] ata4.00: NCQ Send/Recv Log not supported [ 1.105312] ata4.00: ATA-9: Samsung SSD 840 PRO Series, DXM05B0Q, max UDMA/133 [ 1.106662] ata4.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.108012] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170303/psargs-364) [ 1.109336] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff8802274c64b0), AE_NOT_FOUND (20170303/psparse-543) [ 1.110217] ata3.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133 [ 1.111571] ata3.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.113061] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170303/psargs-364) [ 1.113930] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT5._GTF] (Node ffff8802274c6528), AE_NOT_FOUND (20170303/psparse-543) [ 1.114828] ata1.00: disabling queued TRIM support [ 1.114828] ata1.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT02B6Q, max UDMA/133 [ 1.115749] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 1.116693] ata5.00: configured for UDMA/133 [ 1.118126] ata6.00: configured for UDMA/133 [ 1.119107] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170303/psargs-364) [ 1.120729] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT2._GTF] (Node ffff8802274c63c0), AE_NOT_FOUND (20170303/psparse-543) [ 1.121607] ata2.00: configured for UDMA/133 [ 1.123075] ata3.00: configured for UDMA/133 [ 1.124012] ata4.00: NCQ Send/Recv Log not supported [ 1.125460] ata1.00: supports DRM functions and may not be fully accessible [ 1.126873] ata4.00: configured for UDMA/133 [ 1.128791] ata1.00: disabling queued TRIM support [ 1.129121] ata1.00: configured for UDMA/133 [ 1.130180] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5 [ 1.131279] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.131368] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 1.131382] sd 0:0:0:0: [sda] Write Protect is off [ 1.131383] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.131414] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.132679] sda: sda1 sda2 sda3 sda4 sda6 [ 1.132939] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.137168] scsi 1:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A80 PQ: 0 ANSI: 5 [ 1.138285] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.138319] sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 1.138320] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 1.138331] sd 1:0:0:0: [sdb] Write Protect is off [ 1.138332] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.138349] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.143377] scsi 2:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5 [ 1.144417] sd 2:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 1.144427] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 1.144508] scsi 3:0:0:0: Direct-Access ATA Samsung SSD 840 5B0Q PQ: 0 ANSI: 5 [ 1.147303] sd 2:0:0:0: [sdc] 4096-byte physical blocks [ 1.148278] sd 2:0:0:0: [sdc] Write Protect is off [ 1.149237] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.149254] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.149310] ata4.00: Enabling discard_zeroes_data [ 1.149318] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 1.149374] sd 3:0:0:0: [sdd] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 1.149383] sd 3:0:0:0: [sdd] Write Protect is off [ 1.149384] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 1.149395] scsi 4:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5 [ 1.149399] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.149474] ata4.00: Enabling discard_zeroes_data [ 1.151623] sdd: sdd1 sdd2 sdd3 sdd4 < sdd5 sdd6 > [ 1.151841] ata4.00: Enabling discard_zeroes_data [ 1.151992] sd 3:0:0:0: [sdd] Attached SCSI disk [ 1.161106] sd 4:0:0:0: Attached scsi generic sg4 type 0 [ 1.161126] sd 4:0:0:0: [sde] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 1.161127] sd 4:0:0:0: [sde] 4096-byte physical blocks [ 1.161137] sd 4:0:0:0: [sde] Write Protect is off [ 1.161138] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 1.161153] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.166485] scsi 5:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5 [ 1.167781] sd 5:0:0:0: Attached scsi generic sg5 type 0 [ 1.167802] sd 5:0:0:0: [sdf] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 1.167802] sd 5:0:0:0: [sdf] 4096-byte physical blocks [ 1.167812] sd 5:0:0:0: [sdf] Write Protect is off [ 1.167813] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 1.167830] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.191541] sdb: sdb1 sdb9 [ 1.192921] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.205350] sde: sde1 sde9 [ 1.206884] sd 4:0:0:0: [sde] Attached SCSI disk [ 1.214352] sdc: sdc1 sdc9 [ 1.216426] sd 2:0:0:0: [sdc] Attached SCSI disk [ 1.220789] sdf: sdf1 sdf9 [ 1.222085] sd 5:0:0:0: [sdf] Attached SCSI disk [ 1.239487] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.242526] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.244380] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.247491] ata7.00: ATAPI: TSSTcorp CDDVDW SH-224DB, SB00, max UDMA/100 [ 1.250611] ata10.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133 [ 1.252483] ata10.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.254165] ata9.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133 [ 1.255408] ata9.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.257010] ata7.00: configured for UDMA/100 [ 1.258702] ata10.00: configured for UDMA/133 [ 1.260172] ata9.00: configured for UDMA/133 [ 1.262793] scsi 6:0:0:0: CD-ROM TSSTcorp CDDVDW SH-224DB SB00 PQ: 0 ANSI: 5 [ 1.263477] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.279481] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.290348] sr 6:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.291387] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.292534] sr 6:0:0:0: Attached scsi CD-ROM sr0 [ 1.292588] sr 6:0:0:0: Attached scsi generic sg6 type 5 [ 1.293788] scsi 8:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5 [ 1.295256] sd 8:0:0:0: Attached scsi generic sg7 type 0 [ 1.295298] sd 8:0:0:0: [sdg] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 1.295299] sd 8:0:0:0: [sdg] 4096-byte physical blocks [ 1.295311] sd 8:0:0:0: [sdg] Write Protect is off [ 1.295313] sd 8:0:0:0: [sdg] Mode Sense: 00 3a 00 00 [ 1.295339] sd 8:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.302726] scsi 9:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5 [ 1.303957] sd 9:0:0:0: Attached scsi generic sg8 type 0 [ 1.303983] sd 9:0:0:0: [sdh] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 1.303984] sd 9:0:0:0: [sdh] 4096-byte physical blocks [ 1.303995] sd 9:0:0:0: [sdh] Write Protect is off [ 1.303996] sd 9:0:0:0: [sdh] Mode Sense: 00 3a 00 00 [ 1.304014] sd 9:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.350815] sdg: sdg1 sdg9 [ 1.352161] sd 8:0:0:0: [sdg] Attached SCSI removable disk [ 1.355150] sdh: sdh1 sdh9 [ 1.356318] sd 9:0:0:0: [sdh] Attached SCSI removable disk [ 1.381846] usb 1-1: New USB device found, idVendor=8087, idProduct=8008 [ 1.383332] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.384986] hub 1-1:1.0: USB hub found [ 1.386593] hub 1-1:1.0: 6 ports detected [ 1.399846] usb 2-1: New USB device found, idVendor=8087, idProduct=8000 [ 1.401326] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.402959] hub 2-1:1.0: USB hub found [ 1.404564] hub 2-1:1.0: 8 ports detected [ 1.613115] ata12: SATA link down (SStatus 0 SControl 300) [ 1.615733] Freeing unused kernel memory: 1356K [ 1.617245] Write protecting the kernel read-only data: 14336k [ 1.618957] Freeing unused kernel memory: 252K [ 1.623102] Freeing unused kernel memory: 1036K [ 1.759494] tsc: Refined TSC clocksource calibration: 3499.995 MHz [ 1.759502] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x32734c8180a, max_idle_ns: 440795326857 ns [ 2.023911] random: crng init done [ 2.363425] findfs (2507) used greatest stack depth: 13448 bytes left [ 2.368172] EXT4-fs (sda4): couldn't mount as ext3 due to feature incompatibilities [ 2.368279] EXT4-fs (sda4): couldn't mount as ext2 due to feature incompatibilities [ 2.370801] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 2.434064] init-early.sh (2534) used greatest stack depth: 13048 bytes left [ 2.767597] clocksource: Switched to clocksource tsc [ 2.954081] cgroup: cgroup2: unknown option "nsdelegate" [ 2.991710] udevd[3010]: starting version 3.1.5 [ 3.063764] [drm] radeon kernel modesetting enabled. [ 3.063798] radeon 0000:01:00.0: enabling device (0000 -> 0003) [ 3.063902] [drm] initializing kernel modesetting (TAHITI 0x1002:0x6798 0x148C:0x3001 0x00). [ 3.065926] e1000e 0000:00:19.0 eno1: renamed from eth0 [ 3.069170] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 3.069332] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 3.070936] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810 [ 3.070959] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 3.071309] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.071310] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.071311] usb usb3: Product: xHCI Host Controller [ 3.071311] usb usb3: Manufacturer: Linux 4.12.12-gentoo xhci-hcd [ 3.071312] usb usb3: SerialNumber: 0000:00:14.0 [ 3.071451] hub 3-0:1.0: USB hub found [ 3.071571] hub 3-0:1.0: 14 ports detected [ 3.074472] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 3.074511] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 3.074567] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 3.074568] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.074569] usb usb4: Product: xHCI Host Controller [ 3.074569] usb usb4: Manufacturer: Linux 4.12.12-gentoo xhci-hcd [ 3.074570] usb usb4: SerialNumber: 0000:00:14.0 [ 3.074659] hub 4-0:1.0: USB hub found [ 3.074714] hub 4-0:1.0: 6 ports detected [ 3.116207] spl: loading out-of-tree module taints kernel. [ 3.116568] SPL: Loaded module v0.7.3-r0-gentoo [ 3.116973] znvpair: module license 'CDDL' taints kernel. [ 3.116973] Disabling lock debugging due to kernel taint [ 3.438553] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 3.611407] usb 3-3: New USB device found, idVendor=174c, idProduct=2074 [ 3.611408] usb 3-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 3.611409] usb 3-3: Product: ASM107x [ 3.611409] usb 3-3: Manufacturer: Asmedia [ 3.611410] usb 3-3: SerialNumber: 00000000A001 [ 3.611761] hub 3-3:1.0: USB hub found [ 3.611918] hub 3-3:1.0: 4 ports detected [ 3.770570] usb 3-4: new full-speed USB device number 3 using xhci_hcd [ 4.037125] ATOM BIOS: Tahiti [ 4.037153] [drm] GPU not posted. posting now... [ 4.047804] [drm] Changing default dispclk from 500Mhz to 600Mhz [ 4.047812] radeon 0000:01:00.0: VRAM: 3072M 0x0000000000000000 - 0x00000000BFFFFFFF (3072M used) [ 4.047813] radeon 0000:01:00.0: GTT: 2048M 0x00000000C0000000 - 0x000000013FFFFFFF [ 4.047819] [drm] Detected VRAM RAM=3072M, BAR=256M [ 4.047819] [drm] RAM width 384bits DDR [ 4.047843] [TTM] Zone kernel: Available graphics memory: 3925490 kiB [ 4.047843] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 4.047843] [TTM] Initializing pool allocator [ 4.047845] [TTM] Initializing DMA pool allocator [ 4.047859] [drm] radeon: 3072M of VRAM memory ready [ 4.047859] [drm] radeon: 2048M of GTT memory ready. [ 4.047865] [drm] Loading tahiti Microcode [ 4.052740] usb 3-4: string descriptor 0 read error: -22 [ 4.052742] usb 3-4: New USB device found, idVendor=0b05, idProduct=17d0 [ 4.052744] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.052959] [drm] Internal thermal controller with fan control [ 4.052989] [drm] probing gen 2 caps for device 8086:c01 = 261ac83/e [ 4.057445] [drm] radeon: dpm initialized [ 4.059711] [drm] Found VCE firmware/feedback version 50.0.1 / 17! [ 4.059718] [drm] GART: num cpu pages 524288, num gpu pages 524288 [ 4.060466] [drm] probing gen 2 caps for device 8086:c01 = 261ac83/e [ 4.060468] [drm] PCIE gen 3 link speeds already enabled [ 4.062630] [drm] PCIE GART of 2048M enabled (table at 0x00000000001D6000). [ 4.062724] radeon 0000:01:00.0: WB enabled [ 4.062725] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000c0000c00 and cpu addr 0xffff88021c6ebc00 [ 4.062726] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x00000000c0000c04 and cpu addr 0xffff88021c6ebc04 [ 4.062727] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x00000000c0000c08 and cpu addr 0xffff88021c6ebc08 [ 4.062728] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x00000000c0000c0c and cpu addr 0xffff88021c6ebc0c [ 4.062728] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x00000000c0000c10 and cpu addr 0xffff88021c6ebc10 [ 4.062937] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90009c35a18 [ 4.083060] radeon 0000:01:00.0: fence driver on ring 6 use gpu addr 0x00000000c0000c18 and cpu addr 0xffff88021c6ebc18 [ 4.083061] radeon 0000:01:00.0: fence driver on ring 7 use gpu addr 0x00000000c0000c1c and cpu addr 0xffff88021c6ebc1c [ 4.083066] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.083067] [drm] Driver supports precise vblank timestamp query. [ 4.083068] radeon 0000:01:00.0: radeon: MSI limited to 32-bit [ 4.083092] radeon 0000:01:00.0: radeon: using MSI. [ 4.083108] [drm] radeon: irq initialized. [ 4.125896] ath9k 0000:04:00.0: enabling device (0000 -> 0002) [ 4.132701] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20170303/utaddress-247) [ 4.132705] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.132707] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170303/utaddress-247) [ 4.132709] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.132709] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170303/utaddress-247) [ 4.132711] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170303/utaddress-247) [ 4.132712] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.132713] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170303/utaddress-247) [ 4.132714] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170303/utaddress-247) [ 4.132715] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.132716] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 4.135502] ath: EEPROM regdomain: 0x60 [ 4.135503] ath: EEPROM indicates we should expect a direct regpair map [ 4.135504] ath: Country alpha2 being used: 00 [ 4.135505] ath: Regpair used: 0x60 [ 4.138570] usb 3-3.4: new full-speed USB device number 4 using xhci_hcd [ 4.229993] [drm] ring test on 0 succeeded in 1 usecs [ 4.229996] [drm] ring test on 1 succeeded in 1 usecs [ 4.229999] [drm] ring test on 2 succeeded in 1 usecs [ 4.230004] [drm] ring test on 3 succeeded in 3 usecs [ 4.230007] [drm] ring test on 4 succeeded in 2 usecs [ 4.238459] usb 3-3.4: New USB device found, idVendor=045e, idProduct=07b2 [ 4.238460] usb 3-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.238461] usb 3-3.4: Product: Microsoft® 2.4GHz Transceiver v8.0 [ 4.238461] usb 3-3.4: Manufacturer: Microsoft [ 4.242934] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.4/3-3.4:1.0/0003:045E:07B2.0001/input/input22 [ 4.295649] hid-generic 0003:045E:07B2.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-0000:00:14.0-3.4/input0 [ 4.299647] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.4/3-3.4:1.1/0003:045E:07B2.0002/input/input23 [ 4.299691] hid-generic 0003:045E:07B2.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-0000:00:14.0-3.4/input1 [ 4.305204] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.4/3-3.4:1.2/0003:045E:07B2.0003/input/input24 [ 4.338665] usb 4-3: new SuperSpeed USB device number 2 using xhci_hcd [ 4.352407] usb 4-3: New USB device found, idVendor=174c, idProduct=3074 [ 4.352408] usb 4-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 4.352409] usb 4-3: Product: ASM107x [ 4.352409] usb 4-3: Manufacturer: Asmedia [ 4.352410] usb 4-3: SerialNumber: 00000000A001 [ 4.353107] hub 4-3:1.0: USB hub found [ 4.353223] hub 4-3:1.0: 4 ports detected [ 4.356643] hid-generic 0003:045E:07B2.0003: input,hiddev96,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-0000:00:14.0-3.4/input2 [ 4.417251] [drm] ring test on 5 succeeded in 2 usecs [ 4.417253] [drm] UVD initialized successfully. [ 4.481279] EXT4-fs (sda4): re-mounted. Opts: (null) [ 4.527407] [drm] ring test on 6 succeeded in 21 usecs [ 4.527415] [drm] ring test on 7 succeeded in 3 usecs [ 4.527416] [drm] VCE initialized successfully. [ 4.527586] [drm] ib test on ring 0 succeeded in 0 usecs [ 4.527604] [drm] ib test on ring 1 succeeded in 0 usecs [ 4.527629] [drm] ib test on ring 2 succeeded in 0 usecs [ 4.527645] [drm] ib test on ring 3 succeeded in 0 usecs [ 4.527660] [drm] ib test on ring 4 succeeded in 0 usecs [ 4.536784] Adding 8000508k swap on /dev/sda6. Priority:-1 extents:1 across:8000508k SS [ 4.630885] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 4.631093] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffc90001d80000, irq=17 [ 4.785269] ath9k 0000:04:00.0 wlp4s0: renamed from wlan0 [ 5.033603] ZFS: Loaded module v0.7.3-r0-gentoo, ZFS pool version 5000, ZFS filesystem version 5 [ 5.199661] [drm] ib test on ring 5 succeeded [ 5.703677] [drm] ib test on ring 6 succeeded [ 5.730806] usb 3-3.4: reset full-speed USB device number 4 using xhci_hcd [ 6.207708] [drm] ib test on ring 7 succeeded [ 6.208162] [drm] Radeon Display Connectors [ 6.208163] [drm] Connector 0: [ 6.208163] [drm] DP-2 [ 6.208164] [drm] HPD5 [ 6.208165] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c [ 6.208166] [drm] Encoders: [ 6.208167] [drm] DFP1: INTERNAL_UNIPHY2 [ 6.208168] [drm] Connector 1: [ 6.208168] [drm] DP-3 [ 6.208169] [drm] HPD4 [ 6.208170] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c [ 6.208170] [drm] Encoders: [ 6.208171] [drm] DFP2: INTERNAL_UNIPHY2 [ 6.208172] [drm] Connector 2: [ 6.208172] [drm] HDMI-A-4 [ 6.208173] [drm] HPD1 [ 6.208174] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c [ 6.208175] [drm] Encoders: [ 6.208175] [drm] DFP3: INTERNAL_UNIPHY1 [ 6.208176] [drm] Connector 3: [ 6.208176] [drm] DVI-I-1 [ 6.208177] [drm] HPD3 [ 6.208178] [drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c [ 6.208179] [drm] Encoders: [ 6.208179] [drm] DFP4: INTERNAL_UNIPHY [ 6.208180] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 6.316729] snd_hda_codec_hdmi hdaudioC2D0: HDMI ATI/AMD: no speaker allocation for ELD [ 6.327581] [drm] fb mappable at 0xE05D8000 [ 6.327582] [drm] vram apper at 0xE0000000 [ 6.327582] [drm] size 14745600 [ 6.327583] [drm] fb depth is 24 [ 6.327583] [drm] pitch is 10240 [ 6.327645] radeon 0000:01:00.0: fb1: radeondrmfb frame buffer device [ 6.327688] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 1 [ 6.623719] snd_hda_codec_hdmi hdaudioC2D0: HDMI ATI/AMD: no speaker allocation for ELD [ 6.927732] snd_hda_codec_hdmi hdaudioC2D0: HDMI ATI/AMD: no speaker allocation for ELD [ 7.231723] snd_hda_codec_hdmi hdaudioC2D0: HDMI ATI/AMD: no speaker allocation for ELD [ 8.587227] zpool (3738) used greatest stack depth: 11984 bytes left [ 11.231968] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [ 11.449496] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 11.475784] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 11.475885] NFSD: starting 90-second grace period (net ffffffff81ef2cc0) [ 11.653067] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 11.665770] br0: port 1(eno1) entered blocking state [ 11.665771] br0: port 1(eno1) entered disabled state [ 11.665800] device eno1 entered promiscuous mode [ 11.668631] device br0 entered promiscuous mode [ 11.669496] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready [ 11.683344] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready [ 12.169879] radeon_dp_aux_transfer_native: 158 callbacks suppressed [ 13.874930] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 13.874969] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready [ 13.874999] br0: port 1(eno1) entered blocking state [ 13.875000] br0: port 1(eno1) entered forwarding state [ 13.875050] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready [ 14.659889] udevd (3050) used greatest stack depth: 11888 bytes left [ 57.654697] radeon_dp_aux_transfer_native: 158 callbacks suppressed