[ 0.000000] microcode: microcode updated early to revision 0x25, date = 2018-04-02 [ 0.000000] Linux version 4.14.51-gentoo (root@richard-desktop) (gcc version 8.1.0 (Gentoo 8.1.0-r3 p1.3)) #7 SMP Mon Jun 25 21:39:53 CEST 2018 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.14.51-gentoo root=/dev/sda4 ro rootfstype=ext4 iommu=off intel_iommu=off [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a87fcfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a87fd000-0x00000000a8803fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000a8804000-0x00000000a8c50fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a8c51000-0x00000000a90a1fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000a90a2000-0x00000000bc661fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bc662000-0x00000000bc869fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bc86a000-0x00000000bc87ffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bc880000-0x00000000bcdc1fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bcdc2000-0x00000000bdf5bfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bdf5c000-0x00000000bdffefff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000bdfff000-0x00000000bdffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf000000-0x00000000cf1fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000062fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.31 by American Megatrends [ 0.000000] efi: ESRT=0xbdf5a818 ACPI=0xbc86e000 ACPI 2.0=0xbc86e000 SMBIOS=0xf04c0 MPS=0xfd500 [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: ASUS All Series/Z87-PRO, BIOS 1405 08/19/2013 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x62fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D7FFF write-protect [ 0.000000] D8000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7C00000000 write-back [ 0.000000] 1 base 0400000000 mask 7E00000000 write-back [ 0.000000] 2 base 0600000000 mask 7FC0000000 write-back [ 0.000000] 3 base 00C0000000 mask 7FC0000000 uncachable [ 0.000000] 4 base 00BF000000 mask 7FFF000000 uncachable [ 0.000000] 5 base 0630000000 mask 7FF0000000 uncachable [ 0.000000] 6 base 062FE00000 mask 7FFFE00000 uncachable [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] e820: update [mem 0xbf000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xbe000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fd7f0-0x000fd7ff] mapped at [ffffffffff2407f0] [ 0.000000] esrt: Reserving ESRT space from 0x00000000bdf5a818 to 0x00000000bdf5a850. [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x0396c000, 0x0396cfff] PGTABLE [ 0.000000] BRK [0x0396d000, 0x0396dfff] PGTABLE [ 0.000000] BRK [0x0396e000, 0x0396efff] PGTABLE [ 0.000000] BRK [0x0396f000, 0x0396ffff] PGTABLE [ 0.000000] BRK [0x03970000, 0x03970fff] PGTABLE [ 0.000000] BRK [0x03971000, 0x03971fff] PGTABLE [ 0.000000] Secure boot could not be determined [ 0.000000] RAMDISK: [mem 0x37fe3000-0x37fe8fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000BC86E000 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000BC86E080 00007C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000BC87AE88 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000BC86E198 00CCED (v02 ALASKA A M I 00000024 INTL 20091112) [ 0.000000] ACPI: FACS 0x00000000BCDC0080 000040 [ 0.000000] ACPI: APIC 0x00000000BC87AF98 000092 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000BC87B030 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 0x00000000BC87B078 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.000000] ACPI: SSDT 0x00000000BC87B5B8 000AD8 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: MCFG 0x00000000BC87C090 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000BC87C0D0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000BC87C108 00036D (v01 SataRe SataTabl 00001000 INTL 20091112) [ 0.000000] ACPI: SSDT 0x00000000BC87C478 00329E (v01 SaSsdt SaSsdt 00003000 INTL 20091112) [ 0.000000] ACPI: DMAR 0x00000000BC87F7A8 0000B8 (v01 INTEL HSW 00000001 INTL 00000001) [ 0.000000] ACPI: BGRT 0x00000000BC87F770 000038 (v00 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000062fdfffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x62fdf7000-0x62fdfafff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000062fdfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000a87fcfff] [ 0.000000] node 0: [mem 0x00000000a8804000-0x00000000a8c50fff] [ 0.000000] node 0: [mem 0x00000000a90a2000-0x00000000bc661fff] [ 0.000000] node 0: [mem 0x00000000bdfff000-0x00000000bdffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000062fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000062fdfffff] [ 0.000000] On node 0 totalpages: 6209448 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 43 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 11977 pages used for memmap [ 0.000000] DMA32 zone: 766475 pages, LIFO batch:31 [ 0.000000] Normal zone: 84984 pages used for memmap [ 0.000000] Normal zone: 5438976 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at 0x00000000bf200000-0x00000000cf1fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xa87fd000-0xa8803fff] [ 0.000000] PM: Registered nosave memory: [mem 0xa8c51000-0xa90a1fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbc662000-0xbc869fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbc86a000-0xbc87ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbc880000-0xbcdc1fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbcdc2000-0xbdf5bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbdf5c000-0xbdffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xbe000000-0xbeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf000000-0xcf1fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcf200000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xcf200000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 44 pages/cpu @ffff88062fa00000 s142872 r8192 d29160 u262144 [ 0.000000] pcpu-alloc: s142872 r8192 d29160 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 6112380 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.14.51-gentoo root=/dev/sda4 ro rootfstype=ext4 iommu=off intel_iommu=off [ 0.000000] DMAR: IOMMU disabled [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Memory: 24195180K/24837792K available (12300K kernel code, 1374K rwdata, 3104K rodata, 1376K init, 692K bss, 642612K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.001000] tsc: Detected 3397.674 MHz processor [ 0.001000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6795.34 BogoMIPS (lpj=3397674) [ 0.001000] pid_max: default: 32768 minimum: 301 [ 0.001000] ACPI: Core revision 20170728 [ 0.006188] ACPI: 5 ACPI AML tables successfully acquired and loaded [ 0.006779] Security Framework initialized [ 0.006781] SELinux: Initializing. [ 0.006786] SELinux: Starting in permissive mode [ 0.010603] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 0.012496] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.012563] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.012623] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.012738] CPU: Physical Processor ID: 0 [ 0.012740] CPU: Processor Core ID: 0 [ 0.012744] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.012745] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.012749] mce: CPU supports 9 MCE banks [ 0.012757] CPU0: Thermal monitoring enabled (TM1) [ 0.012767] process: using mwait in idle threads [ 0.012770] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.012771] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.012773] Spectre V2 : Mitigation: Full generic retpoline [ 0.012775] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier [ 0.012776] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.012778] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.012856] Freeing SMP alternatives memory: 40K [ 0.017919] smpboot: Max logical packages: 2 [ 0.017924] DMAR: Host address width 39 [ 0.017925] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.017931] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a [ 0.017933] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.017937] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da [ 0.017938] DMAR: RMRR base: 0x000000bc7f1000 end: 0x000000bc7fdfff [ 0.017940] DMAR: RMRR base: 0x000000bf000000 end: 0x000000cf1fffff [ 0.017942] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.017944] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.018174] DMAR-IR: Enabled IRQ remapping in xapic mode [ 0.018551] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.028561] TSC deadline timer enabled [ 0.028563] smpboot: CPU0: Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz (family: 0x6, model: 0x3c, stepping: 0x3) [ 0.028603] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.028633] ... version: 3 [ 0.028634] ... bit width: 48 [ 0.028636] ... generic registers: 4 [ 0.028637] ... value mask: 0000ffffffffffff [ 0.028638] ... max period: 00007fffffffffff [ 0.028639] ... fixed-purpose events: 3 [ 0.028640] ... event mask: 000000070000000f [ 0.028662] Hierarchical SRCU implementation. [ 0.028745] smp: Bringing up secondary CPUs ... [ 0.028782] x86: Booting SMP configuration: [ 0.028784] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.034371] smp: Brought up 1 node, 8 CPUs [ 0.034371] smpboot: Total of 8 processors activated (54362.78 BogoMIPS) [ 0.035398] devtmpfs: initialized [ 0.035398] PM: Registering ACPI NVS region [mem 0xa87fd000-0xa8803fff] (28672 bytes) [ 0.035398] PM: Registering ACPI NVS region [mem 0xbc880000-0xbcdc1fff] (5513216 bytes) [ 0.035398] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.035398] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.035398] kworker/u16:0 (50) used greatest stack depth: 14312 bytes left [ 0.035398] RTC time: 8:22:20, date: 06/27/18 [ 0.035398] NET: Registered protocol family 16 [ 0.035398] cpuidle: using governor menu [ 0.035398] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.035398] ACPI: bus type PCI registered [ 0.036009] kworker/u16:1 (69) used greatest stack depth: 14288 bytes left [ 0.036014] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.036018] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.036023] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override. [ 0.036069] PCI: Using configuration type 1 for base access [ 0.036097] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.038238] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.038238] ACPI: Added _OSI(Module Device) [ 0.038238] ACPI: Added _OSI(Processor Device) [ 0.038238] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.038238] ACPI: Added _OSI(Processor Aggregator Device) [ 0.038238] ACPI: Executed 1 blocks of module-level executable AML code [ 0.040110] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.041075] ACPI: Dynamic OEM Table Load: [ 0.041081] ACPI: SSDT 0xFFFF8806136C0000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.041168] ACPI: Dynamic OEM Table Load: [ 0.041168] ACPI: SSDT 0xFFFF8806136C8000 0005AA (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.041408] ACPI: Dynamic OEM Table Load: [ 0.041411] ACPI: SSDT 0xFFFF880613EF6A00 000119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.042926] ACPI: Interpreter enabled [ 0.042944] ACPI: (supports S0 S3 S4 S5) [ 0.042945] ACPI: Using IOAPIC for interrupt routing [ 0.042963] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.043127] ACPI: Enabled 9 GPEs in block 00 to 3F [ 0.048359] ACPI: Power Resource [FN00] (off) [ 0.048404] ACPI: Power Resource [FN01] (off) [ 0.048445] ACPI: Power Resource [FN02] (off) [ 0.048487] ACPI: Power Resource [FN03] (off) [ 0.048528] ACPI: Power Resource [FN04] (off) [ 0.049053] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.049058] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.049197] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME] [ 0.049274] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability] [ 0.049276] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.049443] PCI host bridge to bus 0000:00 [ 0.049446] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.049448] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.049450] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.049452] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.049454] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.049456] pci_bus 0000:00: root bus resource [mem 0xcf200000-0xfeafffff window] [ 0.049458] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.049464] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000 [ 0.049524] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400 [ 0.049551] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.049620] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000 [ 0.049628] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit] [ 0.049632] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.049635] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.049644] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.049690] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 [ 0.049696] pci 0000:00:03.0: reg 0x10: [mem 0xf7c34000-0xf7c37fff 64bit] [ 0.049763] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.049779] pci 0000:00:14.0: reg 0x10: [mem 0xf7c20000-0xf7c2ffff 64bit] [ 0.049826] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.049869] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.049886] pci 0000:00:16.0: reg 0x10: [mem 0xf7c3f000-0xf7c3f00f 64bit] [ 0.049936] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.049984] pci 0000:00:19.0: [8086:153b] type 00 class 0x020000 [ 0.049998] pci 0000:00:19.0: reg 0x10: [mem 0xf7c00000-0xf7c1ffff] [ 0.050004] pci 0000:00:19.0: reg 0x14: [mem 0xf7c3d000-0xf7c3dfff] [ 0.050010] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f] [ 0.050056] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.050101] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.050119] pci 0000:00:1a.0: reg 0x10: [mem 0xf7c3c000-0xf7c3c3ff] [ 0.050188] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.050233] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 [ 0.050248] pci 0000:00:1b.0: reg 0x10: [mem 0xf7c30000-0xf7c33fff 64bit] [ 0.050295] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.050340] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.050395] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.050461] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.050516] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.050581] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.050636] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.050699] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400 [ 0.050754] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.050821] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.050839] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c3b000-0xf7c3b3ff] [ 0.050907] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.050954] pci 0000:00:1f.0: [8086:8c44] type 00 class 0x060100 [ 0.051083] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.051095] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7] [ 0.051101] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3] [ 0.051106] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7] [ 0.051111] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3] [ 0.051117] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.051122] pci 0000:00:1f.2: reg 0x24: [mem 0xf7c3a000-0xf7c3a7ff] [ 0.051149] pci 0000:00:1f.2: PME# supported from D3hot [ 0.051189] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.051202] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c39000-0xf7c390ff 64bit] [ 0.051218] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.051288] pci 0000:01:00.0: [1002:6798] type 00 class 0x030000 [ 0.051299] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.051304] pci 0000:01:00.0: reg 0x18: [mem 0xf7b00000-0xf7b3ffff 64bit] [ 0.051307] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 0.051313] pci 0000:01:00.0: reg 0x30: [mem 0xf7b40000-0xf7b5ffff pref] [ 0.051339] pci 0000:01:00.0: supports D1 D2 [ 0.051340] pci 0000:01:00.0: PME# supported from D1 D2 D3hot [ 0.051368] pci 0000:01:00.1: [1002:aaa0] type 00 class 0x040300 [ 0.051379] pci 0000:01:00.1: reg 0x10: [mem 0xf7b60000-0xf7b63fff 64bit] [ 0.051417] pci 0000:01:00.1: supports D1 D2 [ 0.054009] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.054014] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.054016] pci 0000:00:01.0: bridge window [mem 0xf7b00000-0xf7bfffff] [ 0.054018] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.054045] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.054089] pci 0000:03:00.0: [168c:0034] type 00 class 0x028000 [ 0.054117] pci 0000:03:00.0: reg 0x10: [mem 0xf7a00000-0xf7a7ffff 64bit] [ 0.054150] pci 0000:03:00.0: reg 0x30: [mem 0xf7a80000-0xf7a8ffff pref] [ 0.054214] pci 0000:03:00.0: supports D1 D2 [ 0.054215] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.057013] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.057018] pci 0000:00:1c.1: bridge window [mem 0xf7a00000-0xf7afffff] [ 0.057057] pci 0000:04:00.0: [1b4b:9235] type 00 class 0x010601 [ 0.057076] pci 0000:04:00.0: reg 0x10: [io 0xd050-0xd057] [ 0.057085] pci 0000:04:00.0: reg 0x14: [io 0xd040-0xd043] [ 0.057093] pci 0000:04:00.0: reg 0x18: [io 0xd030-0xd037] [ 0.057101] pci 0000:04:00.0: reg 0x1c: [io 0xd020-0xd023] [ 0.057110] pci 0000:04:00.0: reg 0x20: [io 0xd000-0xd01f] [ 0.057118] pci 0000:04:00.0: reg 0x24: [mem 0xf7940000-0xf79407ff] [ 0.057127] pci 0000:04:00.0: reg 0x30: [mem 0xf7900000-0xf793ffff pref] [ 0.057174] pci 0000:04:00.0: PME# supported from D3hot [ 0.060011] pci 0000:00:1c.4: PCI bridge to [bus 04] [ 0.060015] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.060017] pci 0000:00:1c.4: bridge window [mem 0xf7900000-0xf79fffff] [ 0.060057] pci 0000:05:00.0: [1b21:0612] type 00 class 0x010601 [ 0.060078] pci 0000:05:00.0: reg 0x10: [io 0xc050-0xc057] [ 0.060088] pci 0000:05:00.0: reg 0x14: [io 0xc040-0xc043] [ 0.060097] pci 0000:05:00.0: reg 0x18: [io 0xc030-0xc037] [ 0.060107] pci 0000:05:00.0: reg 0x1c: [io 0xc020-0xc023] [ 0.060116] pci 0000:05:00.0: reg 0x20: [io 0xc000-0xc01f] [ 0.060126] pci 0000:05:00.0: reg 0x24: [mem 0xf7800000-0xf78001ff] [ 0.063010] pci 0000:00:1c.5: PCI bridge to [bus 05] [ 0.063014] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff] [ 0.063016] pci 0000:00:1c.5: bridge window [mem 0xf7800000-0xf78fffff] [ 0.063424] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.063456] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.063485] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 10 11 12 14 15) [ 0.063514] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.063543] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.063572] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 *15) [ 0.063601] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15) [ 0.063630] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15) [ 0.063889] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.063889] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.063889] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 0.063889] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.063889] pci 0000:00:02.0: vgaarb: no bridge control possible [ 0.063889] vgaarb: loaded [ 0.063889] SCSI subsystem initialized [ 0.063889] libata version 3.00 loaded. [ 0.064003] ACPI: bus type USB registered [ 0.064018] usbcore: registered new interface driver usbfs [ 0.064024] usbcore: registered new interface driver hub [ 0.064039] usbcore: registered new device driver usb [ 0.064054] pps_core: LinuxPPS API ver. 1 registered [ 0.064055] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.064059] PTP clock support registered [ 0.064074] EDAC MC: Ver: 3.0.0 [ 0.064074] Registered efivars operations [ 0.067116] PCI: Using ACPI for IRQ routing [ 0.068254] PCI: pci_cache_line_size set to 64 bytes [ 0.068292] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.068293] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.068294] e820: reserve RAM buffer [mem 0xa87fd000-0xabffffff] [ 0.068294] e820: reserve RAM buffer [mem 0xa8c51000-0xabffffff] [ 0.068295] e820: reserve RAM buffer [mem 0xbc662000-0xbfffffff] [ 0.068296] e820: reserve RAM buffer [mem 0xbe000000-0xbfffffff] [ 0.068297] e820: reserve RAM buffer [mem 0x62fe00000-0x62fffffff] [ 0.068389] NetLabel: Initializing [ 0.068389] NetLabel: domain hash size = 128 [ 0.068389] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.068389] NetLabel: unlabeled traffic allowed by default [ 0.068389] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.068389] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.070013] clocksource: Switched to clocksource hpet [ 0.075372] VFS: Disk quotas dquot_6.6.0 [ 0.075384] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.076628] pnp: PnP ACPI init [ 0.076682] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.076687] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.076794] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.076797] system 00:01: [io 0xffff] has been reserved [ 0.076799] system 00:01: [io 0xffff] has been reserved [ 0.076801] system 00:01: [io 0xffff] has been reserved [ 0.076803] system 00:01: [io 0x1c00-0x1cfe] has been reserved [ 0.076805] system 00:01: [io 0x1d00-0x1dfe] has been reserved [ 0.076806] system 00:01: [io 0x1e00-0x1efe] has been reserved [ 0.076808] system 00:01: [io 0x1f00-0x1ffe] has been reserved [ 0.076810] system 00:01: [io 0x1800-0x18fe] has been reserved [ 0.076812] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.076816] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.076830] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.076857] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.076861] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.076909] system 00:04: [io 0x0290-0x029f] has been reserved [ 0.076913] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.076945] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.076949] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.077218] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.077220] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.077222] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.077224] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.077226] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.077228] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.077231] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.077233] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.077235] system 00:06: [mem 0xff000000-0xffffffff] has been reserved [ 0.077237] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.077239] system 00:06: [mem 0xf7fef000-0xf7feffff] has been reserved [ 0.077241] system 00:06: [mem 0xf7ff0000-0xf7ff0fff] has been reserved [ 0.077245] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.077401] pnp: PnP ACPI: found 7 devices [ 0.081927] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.081954] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.081957] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.081959] pci 0000:00:01.0: bridge window [mem 0xf7b00000-0xf7bfffff] [ 0.081962] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.081966] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.081974] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.081978] pci 0000:00:1c.1: bridge window [mem 0xf7a00000-0xf7afffff] [ 0.081985] pci 0000:00:1c.4: PCI bridge to [bus 04] [ 0.081987] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.081991] pci 0000:00:1c.4: bridge window [mem 0xf7900000-0xf79fffff] [ 0.081997] pci 0000:00:1c.5: PCI bridge to [bus 05] [ 0.081999] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff] [ 0.082008] pci 0000:00:1c.5: bridge window [mem 0xf7800000-0xf78fffff] [ 0.082014] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.082015] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.082016] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.082017] pci_bus 0000:00: resource 7 [mem 0x000d8000-0x000dbfff window] [ 0.082018] pci_bus 0000:00: resource 8 [mem 0x000dc000-0x000dffff window] [ 0.082019] pci_bus 0000:00: resource 9 [mem 0xcf200000-0xfeafffff window] [ 0.082020] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.082021] pci_bus 0000:01: resource 1 [mem 0xf7b00000-0xf7bfffff] [ 0.082022] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] [ 0.082023] pci_bus 0000:03: resource 1 [mem 0xf7a00000-0xf7afffff] [ 0.082024] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] [ 0.082025] pci_bus 0000:04: resource 1 [mem 0xf7900000-0xf79fffff] [ 0.082026] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] [ 0.082027] pci_bus 0000:05: resource 1 [mem 0xf7800000-0xf78fffff] [ 0.082087] NET: Registered protocol family 2 [ 0.082203] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.082415] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.082512] TCP: Hash tables configured (established 262144 bind 65536) [ 0.082543] UDP hash table entries: 16384 (order: 7, 524288 bytes) [ 0.082605] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes) [ 0.082683] NET: Registered protocol family 1 [ 0.082745] RPC: Registered named UNIX socket transport module. [ 0.082746] RPC: Registered udp transport module. [ 0.082748] RPC: Registered tcp transport module. [ 0.082749] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.082756] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.115077] PCI: CLS 64 bytes, default 64 [ 0.115096] Unpacking initramfs... [ 0.115193] Freeing initrd memory: 24K [ 0.115292] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 0.115294] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 0.115295] RAPL PMU: hw unit of domain package 2^-14 Joules [ 0.115297] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 0.115298] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 0.115933] Scanning for low memory corruption every 60 seconds [ 0.116082] audit: initializing netlink subsys (disabled) [ 0.116109] audit: type=2000 audit(1530087740.115:1): state=initialized audit_enabled=0 res=1 [ 0.116372] workingset: timestamp_bits=40 max_order=23 bucket_order=0 [ 0.117335] NFS: Registering the id_resolver key type [ 0.117342] random: get_random_bytes called from key_alloc+0x21a/0x490 with crng_init=0 [ 0.117346] Key type id_resolver registered [ 0.117347] Key type id_legacy registered [ 0.117349] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.117399] SELinux: Registering netfilter hooks [ 0.118199] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.118202] io scheduler noop registered [ 0.118203] io scheduler deadline registered [ 0.118225] io scheduler cfq registered (default) [ 0.118227] io scheduler mq-deadline registered [ 0.118228] io scheduler kyber registered [ 0.118666] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.118927] Non-volatile memory driver v1.3 [ 0.118942] Linux agpgart interface v0.103 [ 0.118972] efifb: probing for efifb [ 0.118980] efifb: framebuffer at 0xd0000000, using 3072k, total 3072k [ 0.118982] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 0.118983] efifb: scrolling: redraw [ 0.118985] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.120097] Console: switching to colour frame buffer device 128x48 [ 0.121148] fb0: EFI VGA frame buffer device [ 0.121226] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.121250] ACPI: Power Button [PWRB] [ 0.121281] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.121340] ACPI: Power Button [PWRF] [ 0.121662] Monitor-Mwait will be used to enter C-1 state [ 0.121664] Monitor-Mwait will be used to enter C-2 state [ 0.122605] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 0.122706] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.122720] ACPI: Thermal Zone [TZ00] (28 C) [ 0.122859] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.122873] ACPI: Thermal Zone [TZ01] (30 C) [ 0.123057] [drm] Memory usable by graphics device = 2048M [ 0.123072] checking generic (d0000000 300000) vs hw (d0000000 10000000) [ 0.123072] fb: switching to inteldrmfb from EFI VGA [ 0.123093] Console: switching to colour dummy device 80x25 [ 0.123152] [drm] Replacing VGA console driver [ 0.129061] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 0.129063] [drm] Driver supports precise vblank timestamp query. [ 0.131039] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem [ 0.133278] [drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 0 [ 0.134069] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 0.134214] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2 [ 0.135440] loop: module loaded [ 0.135477] ahci 0000:00:1f.2: version 3.0 [ 0.135587] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.135591] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst [ 0.151292] scsi host0: ahci [ 0.151358] scsi host1: ahci [ 0.151417] scsi host2: ahci [ 0.151480] scsi host3: ahci [ 0.151536] scsi host4: ahci [ 0.151591] scsi host5: ahci [ 0.151614] ata1: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a100 irq 27 [ 0.151617] ata2: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a180 irq 27 [ 0.151619] ata3: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a200 irq 27 [ 0.151622] ata4: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a280 irq 27 [ 0.151624] ata5: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a300 irq 27 [ 0.151626] ata6: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a380 irq 27 [ 0.161832] ahci 0000:04:00.0: AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 0.161837] ahci 0000:04:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 0.162112] scsi host6: ahci [ 0.162179] scsi host7: ahci [ 0.162244] scsi host8: ahci [ 0.162301] scsi host9: ahci [ 0.162327] ata7: SATA max UDMA/133 abar m2048@0xf7940000 port 0xf7940100 irq 28 [ 0.162331] ata8: SATA max UDMA/133 abar m2048@0xf7940000 port 0xf7940180 irq 28 [ 0.162334] ata9: SATA max UDMA/133 abar m2048@0xf7940000 port 0xf7940200 irq 28 [ 0.162338] ata10: SATA max UDMA/133 abar m2048@0xf7940000 port 0xf7940280 irq 28 [ 0.162446] ahci 0000:05:00.0: SSS flag set, parallel bus scan disabled [ 0.162487] ahci 0000:05:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 0.162491] ahci 0000:05:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs [ 0.162647] scsi host10: ahci [ 0.162711] scsi host11: ahci [ 0.162737] ata11: SATA max UDMA/133 abar m512@0xf7800000 port 0xf7800100 irq 29 [ 0.162741] ata12: SATA max UDMA/133 abar m512@0xf7800000 port 0xf7800180 irq 29 [ 0.162800] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 0.162802] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.162814] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 0.162816] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.162828] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 0.162830] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.162925] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 0.235987] fbcon: inteldrmfb (fb0) is primary device [ 0.250893] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 0.289375] Console: switching to colour frame buffer device 320x90 [ 0.306595] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 0.332948] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) d8:50:e6:52:84:b3 [ 0.332980] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 0.333038] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 0.333088] sky2: driver version 1.30 [ 0.333165] VFIO - User Level meta-driver version: 0.3 [ 0.333227] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.333253] ehci-pci: EHCI PCI platform driver [ 0.333342] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.333391] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.333429] ehci-pci 0000:00:1a.0: debug port 2 [ 0.337357] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.337365] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c3c000 [ 0.344048] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.344087] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.344104] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.344122] usb usb1: Product: EHCI Host Controller [ 0.344135] usb usb1: Manufacturer: Linux 4.14.51-gentoo ehci_hcd [ 0.344150] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.344238] hub 1-0:1.0: USB hub found [ 0.344251] hub 1-0:1.0: 2 ports detected [ 0.344386] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.344442] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.344468] ehci-pci 0000:00:1d.0: debug port 2 [ 0.348373] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.348381] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c3b000 [ 0.355048] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.355083] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.355101] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.355118] usb usb2: Product: EHCI Host Controller [ 0.355131] usb usb2: Manufacturer: Linux 4.14.51-gentoo ehci_hcd [ 0.355146] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.355294] hub 2-0:1.0: USB hub found [ 0.355310] hub 2-0:1.0: 2 ports detected [ 0.355392] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.355412] ohci-pci: OHCI PCI platform driver [ 0.355439] uhci_hcd: USB Universal Host Controller Interface driver [ 0.355471] usbcore: registered new interface driver usblp [ 0.355494] usbcore: registered new interface driver usb-storage [ 0.355523] i8042: PNP: No PS/2 controller found. [ 0.355561] mousedev: PS/2 mouse device common for all mice [ 0.355659] rtc_cmos 00:02: RTC can wake from S4 [ 0.355767] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.355803] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.355911] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.356424] IR NEC protocol handler initialized [ 0.356438] IR RC5(x/sz) protocol handler initialized [ 0.356451] IR RC6 protocol handler initialized [ 0.356463] IR JVC protocol handler initialized [ 0.356476] IR Sony protocol handler initialized [ 0.356488] IR SANYO protocol handler initialized [ 0.356501] IR Sharp protocol handler initialized [ 0.356513] IR MCE Keyboard/mouse protocol handler initialized [ 0.356528] IR XMP protocol handler initialized [ 0.356596] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 0.356621] intel_pstate: Intel P-state driver initializing [ 0.356728] EFI Variables Facility v0.08 2004-May-17 [ 0.363759] hidraw: raw HID events driver (C) Jiri Kosina [ 0.364267] usbcore: registered new interface driver usbhid [ 0.364338] usbhid: USB HID core driver [ 0.367908] Netfilter messages via NETLINK v0.30. [ 0.370404] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 0.371372] ctnetlink v0.93: registering with nfnetlink. [ 0.372283] ip_tables: (C) 2000-2006 Netfilter Core Team [ 0.373320] Initializing XFRM netlink socket [ 0.374223] NET: Registered protocol family 10 [ 0.375236] Segment Routing with IPv6 [ 0.376143] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 0.377078] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.378085] NET: Registered protocol family 17 [ 0.378959] Key type dns_resolver registered [ 0.380081] microcode: sig=0x306c3, pf=0x2, revision=0x25 [ 0.380986] microcode: Microcode Update Driver: v2.2. [ 0.380993] sched_clock: Marking stable (380982004, 0)->(389000576, -8018572) [ 0.383393] registered taskstats version 1 [ 0.384794] Magic number: 6:698:372 [ 0.385921] console [netcon0] enabled [ 0.386977] netconsole: network logging started [ 0.460767] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.461834] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.463817] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.466047] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.468000] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.468896] ata11: SATA link down (SStatus 0 SControl 300) [ 0.471113] ata8: SATA link down (SStatus 0 SControl 300) [ 0.472888] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.473967] ata1.00: supports DRM functions and may not be fully accessible [ 0.475113] ata5.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133 [ 0.476311] ata5.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 0.477500] ata2.00: ATA-9: WDC WD30EFRX-68EUZN0, 80.00A80, max UDMA/133 [ 0.478436] ata2.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 0.479597] ata3.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133 [ 0.480771] ata3.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 0.481958] ata6.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133 [ 0.483129] ata6.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 0.484443] ata4.00: NCQ Send/Recv Log not supported [ 0.485752] ata4.00: ATA-9: Samsung SSD 840 PRO Series, DXM05B0Q, max UDMA/133 [ 0.487068] ata4.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 0.488352] ata1.00: disabling queued TRIM support [ 0.488353] ata1.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT02B6Q, max UDMA/133 [ 0.489550] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 0.490897] ata2.00: configured for UDMA/133 [ 0.492194] ata3.00: configured for UDMA/133 [ 0.492997] ata5.00: configured for UDMA/133 [ 0.494251] ata6.00: configured for UDMA/133 [ 0.495100] ata4.00: NCQ Send/Recv Log not supported [ 0.496205] ata4.00: configured for UDMA/133 [ 0.497838] ata1.00: supports DRM functions and may not be fully accessible [ 0.499228] ata1.00: disabling queued TRIM support [ 0.500666] ata1.00: configured for UDMA/133 [ 0.501655] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5 [ 0.502739] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.502789] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 0.502798] sd 0:0:0:0: [sda] Write Protect is off [ 0.502800] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.502818] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.505043] sda: sda1 sda2 sda3 sda4 sda6 [ 0.505275] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.507748] scsi 1:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A80 PQ: 0 ANSI: 5 [ 0.508725] sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 0.508735] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 0.508804] scsi 2:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5 [ 0.508899] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 0.508930] sd 2:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 0.508932] sd 2:0:0:0: [sdc] 4096-byte physical blocks [ 0.508941] sd 2:0:0:0: [sdc] Write Protect is off [ 0.508942] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 0.508959] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.508968] scsi 3:0:0:0: Direct-Access ATA Samsung SSD 840 5B0Q PQ: 0 ANSI: 5 [ 0.509053] ata4.00: Enabling discard_zeroes_data [ 0.509072] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 0.509109] sd 3:0:0:0: [sdd] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 0.509118] sd 3:0:0:0: [sdd] Write Protect is off [ 0.509120] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 0.509135] scsi 4:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5 [ 0.509136] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.509218] ata4.00: Enabling discard_zeroes_data [ 0.509239] sd 4:0:0:0: Attached scsi generic sg4 type 0 [ 0.509269] sd 4:0:0:0: [sde] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 0.509270] sd 4:0:0:0: [sde] 4096-byte physical blocks [ 0.509280] sd 4:0:0:0: [sde] Write Protect is off [ 0.509281] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 0.509297] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.509303] scsi 5:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5 [ 0.509416] sd 5:0:0:0: Attached scsi generic sg5 type 0 [ 0.509424] sd 5:0:0:0: [sdf] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 0.509425] sd 5:0:0:0: [sdf] 4096-byte physical blocks [ 0.509432] sd 5:0:0:0: [sdf] Write Protect is off [ 0.509433] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 0.509454] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.509456] sdd: sdd1 sdd2 sdd3 sdd4 [ 0.509581] ata4.00: Enabling discard_zeroes_data [ 0.509662] sd 3:0:0:0: [sdd] Attached SCSI disk [ 0.534701] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 0.535593] sd 1:0:0:0: [sdb] Write Protect is off [ 0.536478] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 0.536485] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.555166] sde: sde1 sde9 [ 0.556793] sd 4:0:0:0: [sde] Attached SCSI disk [ 0.556904] sdc: sdc1 sdc9 [ 0.557256] sd 2:0:0:0: [sdc] Attached SCSI disk [ 0.560999] sdf: sdf1 sdf9 [ 0.562239] sd 5:0:0:0: [sdf] Attached SCSI disk [ 0.592286] sdb: sdb1 sdb9 [ 0.593524] sd 1:0:0:0: [sdb] Attached SCSI disk [ 0.623071] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.625037] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.627224] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.628865] ata10.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133 [ 0.631390] ata10.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 0.633941] ata9.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133 [ 0.634996] ata9.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 0.635912] ata7.00: ATAPI: TSSTcorp CDDVDW SH-224DB, SB00, max UDMA/100 [ 0.637913] ata9.00: configured for UDMA/133 [ 0.639259] ata10.00: configured for UDMA/133 [ 0.640175] ata7.00: configured for UDMA/100 [ 0.643319] scsi 6:0:0:0: CD-ROM TSSTcorp CDDVDW SH-224DB SB00 PQ: 0 ANSI: 5 [ 0.662264] random: fast init done [ 0.665072] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.666079] nommu_map_single: overflow 6122e10e0+8 of device mask ffffffff [ 0.667064] nommu_map_single: overflow 6122e10e0+8 of device mask ffffffff [ 0.667947] nommu_map_single: overflow 6122e10e0+8 of device mask ffffffff [ 0.685056] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 0.686049] nommu_map_single: overflow 6122e10e0+8 of device mask ffffffff [ 0.686607] sr 6:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.686608] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.686715] sr 6:0:0:0: Attached scsi CD-ROM sr0 [ 0.686774] sr 6:0:0:0: Attached scsi generic sg6 type 5 [ 0.686869] scsi 8:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5 [ 0.687003] sd 8:0:0:0: Attached scsi generic sg7 type 0 [ 0.687023] sd 8:0:0:0: [sdg] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 0.687024] sd 8:0:0:0: [sdg] 4096-byte physical blocks [ 0.687039] sd 8:0:0:0: [sdg] Write Protect is off [ 0.687041] sd 8:0:0:0: [sdg] Mode Sense: 00 3a 00 00 [ 0.687059] sd 8:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.687067] scsi 9:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5 [ 0.687171] sd 9:0:0:0: Attached scsi generic sg8 type 0 [ 0.687184] sd 9:0:0:0: [sdh] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 0.687185] sd 9:0:0:0: [sdh] 4096-byte physical blocks [ 0.687194] sd 9:0:0:0: [sdh] Write Protect is off [ 0.687195] sd 9:0:0:0: [sdh] Mode Sense: 00 3a 00 00 [ 0.687212] sd 9:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.701136] nommu_map_single: overflow 6122e10e0+8 of device mask ffffffff [ 0.702093] nommu_map_single: overflow 6122e10e0+8 of device mask ffffffff [ 0.739047] sdh: sdh1 sdh9 [ 0.740423] sd 9:0:0:0: [sdh] Attached SCSI removable disk [ 0.742230] sdg: sdg1 sdg9 [ 0.743568] sd 8:0:0:0: [sdg] Attached SCSI removable disk [ 0.782086] usb 1-1: device descriptor read/64, error -11 [ 0.816087] usb 2-1: device descriptor read/64, error -11 [ 0.887091] nommu_map_single: overflow 6122e10e0+8 of device mask ffffffff [ 0.888693] nommu_map_single: overflow 6122e10e0+8 of device mask ffffffff [ 0.890266] nommu_map_single: overflow 6122e10e0+8 of device mask ffffffff [ 0.919099] nommu_map_single: overflow 6122e10e0+8 of device mask ffffffff [ 0.920643] nommu_map_single: overflow 6122e10e0+8 of device mask ffffffff [ 0.922159] nommu_map_single: overflow 6122e10e0+8 of device mask ffffffff [ 0.996919] ata12: SATA link down (SStatus 0 SControl 300) [ 0.998460] md: Waiting for all devices to be available before autodetect [ 0.999989] md: If you don't use raid, use raid=noautodetect [ 1.001606] md: Autodetecting RAID arrays. [ 1.003120] md: autorun ... [ 1.004671] md: ... autorun DONE. [ 1.005097] usb 1-1: device descriptor read/64, error -11 [ 1.008646] EXT4-fs (sda4): INFO: recovery required on readonly filesystem [ 1.009584] EXT4-fs (sda4): write access will be enabled during recovery [ 1.037088] usb 2-1: device descriptor read/64, error -11 [ 1.083860] random: crng init done [ 1.119091] tsc: Refined TSC clocksource calibration: 3398.030 MHz [ 1.119925] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30fb0a05005, max_idle_ns: 440795375639 ns [ 1.131801] EXT4-fs (sda4): recovery complete [ 1.133988] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 1.134961] VFS: Mounted root (ext4 filesystem) readonly on device 8:4. [ 1.136466] devtmpfs: mounted [ 1.137823] Freeing unused kernel memory: 1376K [ 1.145152] Write protecting the kernel read-only data: 18432k [ 1.146390] Freeing unused kernel memory: 2008K [ 1.148519] Freeing unused kernel memory: 992K [ 1.193254] kbd_mode (1570) used greatest stack depth: 14248 bytes left [ 1.200678] loadkeys (1571) used greatest stack depth: 13696 bytes left [ 1.201930] init-early.sh (1568) used greatest stack depth: 13440 bytes left [ 1.225132] usb 1-1: new high-speed USB device number 3 using ehci-pci [ 1.226056] nommu_map_single: overflow 6122e10e0+8 of device mask ffffffff [ 1.226944] nommu_map_single: overflow 6122e10e0+8 of device mask ffffffff [ 1.227786] nommu_map_single: overflow 6122e10e0+8 of device mask ffffffff [ 1.257088] usb 2-1: new high-speed USB device number 3 using ehci-pci [ 1.258007] nommu_map_single: overflow 6122e10e0+8 of device mask ffffffff [ 1.258826] nommu_map_single: overflow 6122e10e0+8 of device mask ffffffff [ 1.259658] nommu_map_single: overflow 6122e10e0+8 of device mask ffffffff [ 1.342088] usb 1-1: device descriptor read/64, error -11 [ 1.375104] usb 2-1: device descriptor read/64, error -11 [ 1.447089] nommu_map_single: overflow 6122e10e0+8 of device mask ffffffff [ 1.448008] nommu_map_single: overflow 6122e10e0+8 of device mask ffffffff [ 1.448870] nommu_map_single: overflow 6122e10e0+8 of device mask ffffffff [ 1.479103] nommu_map_single: overflow 6122e10e0+8 of device mask ffffffff [ 1.479994] nommu_map_single: overflow 6122e10e0+8 of device mask ffffffff [ 1.480935] nommu_map_single: overflow 6122e10e0+8 of device mask ffffffff [ 1.563103] usb 1-1: device descriptor read/64, error -11 [ 1.596087] usb 2-1: device descriptor read/64, error -11 [ 1.671113] usb usb1-port1: attempt power cycle [ 1.703100] usb usb2-port1: attempt power cycle [ 1.820204] udevd[2044]: starting version 3.2.5 [ 1.831787] udevd[2044]: invalid key/value pair in file /usr/lib64/udev/rules.d/61-gdm.rules on line 2, starting at character 175 ('[') [ 1.850147] udevd[2045]: starting eudev-3.2.5 [ 1.894662] e1000e 0000:00:19.0 eno1: renamed from eth0 [ 1.899307] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20170728/utaddress-247) [ 1.899312] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.899314] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170728/utaddress-247) [ 1.899316] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.899317] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170728/utaddress-247) [ 1.899319] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170728/utaddress-247) [ 1.899320] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.899321] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170728/utaddress-247) [ 1.899322] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170728/utaddress-247) [ 1.899324] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.899325] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 1.904029] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.904069] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.905181] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810 [ 1.905186] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.905296] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.905297] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.905298] usb usb3: Product: xHCI Host Controller [ 1.905300] usb usb3: Manufacturer: Linux 4.14.51-gentoo xhci-hcd [ 1.905301] usb usb3: SerialNumber: 0000:00:14.0 [ 1.905387] hub 3-0:1.0: USB hub found [ 1.905403] hub 3-0:1.0: 14 ports detected [ 1.906925] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.906951] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 1.906953] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 1.906978] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.906979] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.906979] usb usb4: Product: xHCI Host Controller [ 1.906980] usb usb4: Manufacturer: Linux 4.14.51-gentoo xhci-hcd [ 1.906981] usb usb4: SerialNumber: 0000:00:14.0 [ 1.907058] hub 4-0:1.0: USB hub found [ 1.907070] hub 4-0:1.0: 6 ports detected [ 1.922552] spl: loading out-of-tree module taints kernel. [ 1.924106] [drm] radeon kernel modesetting enabled. [ 1.924154] radeon 0000:01:00.0: enabling device (0000 -> 0003) [ 1.924268] [drm] initializing kernel modesetting (TAHITI 0x1002:0x6798 0x148C:0x3001 0x00). [ 1.925208] ath9k 0000:03:00.0: enabling device (0000 -> 0002) [ 1.927006] SPL: Loaded module v0.7.9-r0-gentoo [ 1.946630] ath: EEPROM regdomain: 0x60 [ 1.946632] ath: EEPROM indicates we should expect a direct regpair map [ 1.946636] ath: Country alpha2 being used: 00 [ 1.946636] ath: Regpair used: 0x60 [ 1.946669] nommu_map_single: overflow 60ce4c040+1974 of device mask ffffffff [ 1.946674] ath: phy0: dma_mapping_error() on RX init [ 1.946833] ath9k 0000:03:00.0: Failed to initialize device [ 1.947046] ath9k: probe of 0000:03:00.0 failed with error -12 [ 2.097099] usb 1-1: new high-speed USB device number 4 using ehci-pci [ 2.097101] nommu_map_single: overflow 6122e1348+8 of device mask ffffffff [ 2.890177] nommu_map_single: overflow 6122e1348+8 of device mask ffffffff [ 2.890180] usb 2-1: new high-speed USB device number 4 using ehci-pci [ 2.890181] clocksource: Switched to clocksource tsc [ 2.890182] nommu_map_single: overflow 6122e1348+8 of device mask ffffffff [ 2.890188] ATOM BIOS: Tahiti [ 2.890208] [drm] GPU not posted. posting now... [ 2.890737] znvpair: module license 'CDDL' taints kernel. [ 2.890737] znvpair: module license 'CDDL' taints kernel. [ 2.890738] Disabling lock debugging due to kernel taint [ 2.893485] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) [ 2.893573] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002) [ 2.901089] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops 0xffffffff81e9bd60) [ 2.902333] [drm] Changing default dispclk from 500Mhz to 600Mhz [ 2.902342] radeon 0000:01:00.0: VRAM: 3072M 0x0000000000000000 - 0x00000000BFFFFFFF (3072M used) [ 2.902343] radeon 0000:01:00.0: GTT: 2048M 0x00000000C0000000 - 0x000000013FFFFFFF [ 2.902348] [drm] Detected VRAM RAM=3072M, BAR=256M [ 2.902349] [drm] RAM width 384bits DDR [ 2.902371] [TTM] Zone kernel: Available graphics memory: 12212692 kiB [ 2.902372] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 2.902373] [TTM] Initializing pool allocator [ 2.902375] [TTM] Initializing DMA pool allocator [ 2.902386] [drm] radeon: 3072M of VRAM memory ready [ 2.902387] [drm] radeon: 2048M of GTT memory ready. [ 2.902392] [drm] Loading tahiti Microcode [ 2.905969] [drm] Internal thermal controller with fan control [ 2.906007] [drm] probing gen 2 caps for device 8086:c01 = 261ad03/e [ 2.911202] [drm] radeon: dpm initialized [ 2.912282] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card1/input3 [ 2.912309] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card1/input4 [ 2.912330] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card1/input5 [ 2.912352] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card1/input6 [ 2.912508] snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000 [ 2.913056] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 2.913057] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 2.913058] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 2.913059] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 2.913059] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e [ 2.913060] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 2.913062] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 2.913062] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 2.913063] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 2.913895] [drm] Found VCE firmware/feedback version 50.0.1 / 17! [ 2.913905] [drm] GART: num cpu pages 524288, num gpu pages 524288 [ 2.914904] [drm] probing gen 2 caps for device 8086:c01 = 261ad03/e [ 2.914906] [drm] PCIE gen 3 link speeds already enabled [ 2.921758] [drm] PCIE GART of 2048M enabled (table at 0x00000000001D6000). [ 2.921857] radeon 0000:01:00.0: WB enabled [ 2.921859] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000c0000c00 and cpu addr 0xffff88060929cc00 [ 2.921860] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x00000000c0000c04 and cpu addr 0xffff88060929cc04 [ 2.921862] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x00000000c0000c08 and cpu addr 0xffff88060929cc08 [ 2.921863] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x00000000c0000c0c and cpu addr 0xffff88060929cc0c [ 2.921864] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x00000000c0000c10 and cpu addr 0xffff88060929cc10 [ 2.922063] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90009a35a18 [ 2.925047] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 2.925555] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 2.925578] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 2.925599] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 2.925621] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 2.925641] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 2.925662] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 2.925684] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 2.925705] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 2.942166] radeon 0000:01:00.0: fence driver on ring 6 use gpu addr 0x00000000c0000c18 and cpu addr 0xffff88060929cc18 [ 2.942168] radeon 0000:01:00.0: fence driver on ring 7 use gpu addr 0x00000000c0000c1c and cpu addr 0xffff88060929cc1c [ 2.942169] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.942170] [drm] Driver supports precise vblank timestamp query. [ 2.942170] radeon 0000:01:00.0: radeon: MSI limited to 32-bit [ 2.942195] radeon 0000:01:00.0: radeon: using MSI. [ 2.942210] [drm] radeon: irq initialized. [ 3.017501] udevd[2045]: invalid key/value pair in file /usr/lib64/udev/rules.d/61-gdm.rules on line 2, starting at character 175 ('[') [ 3.085972] usb 3-1: new full-speed USB device number 2 using xhci_hcd [ 3.086026] [drm] ring test on 0 succeeded in 1 usecs [ 3.086029] [drm] ring test on 1 succeeded in 1 usecs [ 3.086032] [drm] ring test on 2 succeeded in 1 usecs [ 3.086037] [drm] ring test on 3 succeeded in 3 usecs [ 3.086041] [drm] ring test on 4 succeeded in 2 usecs [ 3.095104] nommu_map_single: overflow 6122e1418+8 of device mask ffffffff [ 3.095107] usb 1-1: device not accepting address 4, error -11 [ 3.209104] usb 1-1: new high-speed USB device number 5 using ehci-pci [ 3.209105] nommu_map_single: overflow 6122e1418+8 of device mask ffffffff [ 3.217663] usb 3-1: New USB device found, idVendor=045e, idProduct=07b2 [ 3.217664] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.217665] usb 3-1: Product: Microsoft® 2.4GHz Transceiver v8.0 [ 3.217666] usb 3-1: Manufacturer: Microsoft [ 3.221950] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:045E:07B2.0001/input/input16 [ 3.273149] [drm] ring test on 5 succeeded in 2 usecs [ 3.273152] [drm] UVD initialized successfully. [ 3.274211] hid-generic 0003:045E:07B2.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-0000:00:14.0-1/input0 [ 3.278194] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/0003:045E:07B2.0002/input/input17 [ 3.278266] hid-generic 0003:045E:07B2.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-0000:00:14.0-1/input1 [ 3.283673] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.2/0003:045E:07B2.0003/input/input18 [ 3.303105] usb 2-1: device not accepting address 4, error -11 [ 3.328175] usb 4-3: new SuperSpeed USB device number 2 using xhci_hcd [ 3.335292] hid-generic 0003:045E:07B2.0003: input,hiddev96,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-0000:00:14.0-1/input2 [ 3.376182] usb 4-3: New USB device found, idVendor=174c, idProduct=3074 [ 3.376184] usb 4-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 3.376184] usb 4-3: Product: ASM107x [ 3.376185] usb 4-3: Manufacturer: Asmedia [ 3.376186] usb 4-3: SerialNumber: 00000000A001 [ 3.376928] hub 4-3:1.0: USB hub found [ 3.377054] hub 4-3:1.0: 4 ports detected [ 3.383213] [drm] ring test on 6 succeeded in 21 usecs [ 3.383223] [drm] ring test on 7 succeeded in 4 usecs [ 3.383223] [drm] VCE initialized successfully. [ 3.383312] [drm] ib test on ring 0 succeeded in 0 usecs [ 3.383342] [drm] ib test on ring 1 succeeded in 0 usecs [ 3.383371] [drm] ib test on ring 2 succeeded in 0 usecs [ 3.383400] [drm] ib test on ring 3 succeeded in 0 usecs [ 3.383428] [drm] ib test on ring 4 succeeded in 0 usecs [ 3.415104] nommu_map_single: overflow 6122e1468+8 of device mask ffffffff [ 3.417105] usb 2-1: new high-speed USB device number 5 using ehci-pci [ 3.417106] nommu_map_single: overflow 6122e1468+8 of device mask ffffffff [ 3.456093] usb 3-3: new high-speed USB device number 3 using xhci_hcd [ 3.583863] usb 3-3: New USB device found, idVendor=174c, idProduct=2074 [ 3.583865] usb 3-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 3.583866] usb 3-3: Product: ASM107x [ 3.583867] usb 3-3: Manufacturer: Asmedia [ 3.583868] usb 3-3: SerialNumber: 00000000A001 [ 3.584248] hub 3-3:1.0: USB hub found [ 3.584395] hub 3-3:1.0: 4 ports detected [ 3.623108] nommu_map_single: overflow 6122e1468+8 of device mask ffffffff [ 3.623111] usb 1-1: device not accepting address 5, error -11 [ 3.623128] usb usb1-port1: unable to enumerate USB device [ 3.699108] usb 3-4: new full-speed USB device number 4 using xhci_hcd [ 3.801134] udevd (2090) used greatest stack depth: 12944 bytes left [ 3.828236] usb 3-4: string descriptor 0 read error: -22 [ 3.828239] usb 3-4: New USB device found, idVendor=0b05, idProduct=17d0 [ 3.828240] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.831103] usb 2-1: device not accepting address 5, error -11 [ 3.831111] usb usb2-port1: unable to enumerate USB device [ 3.943082] usb 3-13: new full-speed USB device number 5 using xhci_hcd [ 4.055128] [drm] ib test on ring 5 succeeded [ 4.073237] usb 3-13: New USB device found, idVendor=046d, idProduct=c52b [ 4.073239] usb 3-13: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.073240] usb 3-13: Product: USB Receiver [ 4.073241] usb 3-13: Manufacturer: Logitech [ 4.074830] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13:1.0/0003:046D:C52B.0004/input/input19 [ 4.127263] hid-generic 0003:046D:C52B.0004: input,hidraw3: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-13/input0 [ 4.128967] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13:1.1/0003:046D:C52B.0005/input/input20 [ 4.182656] hid-generic 0003:046D:C52B.0005: input,hiddev97,hidraw4: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-13/input1 [ 4.184438] hid-generic 0003:046D:C52B.0006: hiddev98,hidraw5: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-13/input2 [ 4.298103] usb 3-14: new full-speed USB device number 6 using xhci_hcd [ 4.426289] usb 3-14: New USB device found, idVendor=046d, idProduct=c52b [ 4.426290] usb 3-14: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.426291] usb 3-14: Product: USB Receiver [ 4.426292] usb 3-14: Manufacturer: Logitech [ 4.427830] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.0/0003:046D:C52B.0007/input/input21 [ 4.479312] hid-generic 0003:046D:C52B.0007: input,hidraw6: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-14/input0 [ 4.480943] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.1/0003:046D:C52B.0008/input/input22 [ 4.532439] hid-generic 0003:046D:C52B.0008: input,hiddev99,hidraw7: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-14/input1 [ 4.533653] hid-generic 0003:046D:C52B.0009: hiddev100,hidraw8: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-14/input2 [ 4.566274] [drm] ib test on ring 6 succeeded [ 4.834797] ZFS: Loaded module v0.7.9-r0-gentoo, ZFS pool version 5000, ZFS filesystem version 5 [ 4.846226] udevd[2270]: Error calling EVIOCSKEYCODE on device node '/dev/input/event21' (scan code 0xc00b8, key code 161): Invalid argument [ 4.846231] udevd[2270]: Error calling EVIOCSKEYCODE on device node '/dev/input/event21' (scan code 0xc0183, key code 226): Invalid argument [ 4.846236] udevd[2270]: Error calling EVIOCSKEYCODE on device node '/dev/input/event21' (scan code 0xc0184, key code 421): Invalid argument [ 4.846239] udevd[2270]: Error calling EVIOCSKEYCODE on device node '/dev/input/event21' (scan code 0xc0186, key code 423): Invalid argument [ 4.846244] udevd[2270]: Error calling EVIOCSKEYCODE on device node '/dev/input/event21' (scan code 0xc018a, key code 155): Invalid argument [ 4.846248] udevd[2270]: Error calling EVIOCSKEYCODE on device node '/dev/input/event21' (scan code 0xc018e, key code 397): Invalid argument [ 4.846252] udevd[2270]: Error calling EVIOCSKEYCODE on device node '/dev/input/event21' (scan code 0xc01b6, key code 212): Invalid argument [ 5.071143] [drm] ib test on ring 7 succeeded [ 5.071467] [drm] Radeon Display Connectors [ 5.071467] [drm] Connector 0: [ 5.071468] [drm] DP-2 [ 5.071468] [drm] HPD5 [ 5.071470] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c [ 5.071470] [drm] Encoders: [ 5.071471] [drm] DFP1: INTERNAL_UNIPHY2 [ 5.071471] [drm] Connector 1: [ 5.071472] [drm] DP-3 [ 5.071472] [drm] HPD4 [ 5.071473] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c [ 5.071474] [drm] Encoders: [ 5.071474] [drm] DFP2: INTERNAL_UNIPHY2 [ 5.071475] [drm] Connector 2: [ 5.071475] [drm] HDMI-A-4 [ 5.071475] [drm] HPD1 [ 5.071477] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c [ 5.071477] [drm] Encoders: [ 5.071477] [drm] DFP3: INTERNAL_UNIPHY1 [ 5.071478] [drm] Connector 3: [ 5.071478] [drm] DVI-I-1 [ 5.071479] [drm] HPD3 [ 5.071480] [drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c [ 5.071480] [drm] Encoders: [ 5.071481] [drm] DFP4: INTERNAL_UNIPHY [ 5.071482] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 5.131435] [drm] Cannot find any crtc or sizes [ 5.131817] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 1 [ 5.131874] vfio_pci: add [1002:6798[ffff:ffff]] class 0x000000/00000000 [ 5.131983] snd_hda_intel 0000:01:00.1: Force to non-snoop mode [ 5.132005] vfio_pci: add [1002:aaa0[ffff:ffff]] class 0x000000/00000000 [ 5.132390] udevd (2086) used greatest stack depth: 12440 bytes left [ 5.138393] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input23 [ 5.138468] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input24 [ 5.138525] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input25 [ 5.138566] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input26 [ 5.138625] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input27 [ 5.138683] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input28 [ 5.389614] EXT4-fs (sda4): re-mounted. Opts: (null) [ 5.431616] Adding 8000508k swap on /dev/sda6. Priority:-2 extents:1 across:8000508k SS [ 6.231435] [drm] Cannot find any crtc or sizes [ 10.341657] elogind[4140]: New seat seat0. [ 10.342100] elogind[4140]: Watching system buttons on /dev/input/event1 (Power Button) [ 10.361165] elogind[4140]: Watching system buttons on /dev/input/event0 (Power Button) [ 10.361210] elogind[4140]: Watching system buttons on /dev/input/event16 (Microsoft Microsoft® 2.4GHz Transceiver v8.0) [ 10.361252] elogind[4140]: Watching system buttons on /dev/input/event18 (Microsoft Microsoft® 2.4GHz Transceiver v8.0) [ 10.361293] elogind[4140]: Watching system buttons on /dev/input/event19 (Logitech USB Receiver) [ 10.361334] elogind[4140]: Watching system buttons on /dev/input/event20 (Logitech USB Receiver) [ 10.361377] elogind[4140]: Watching system buttons on /dev/input/event21 (Logitech USB Receiver) [ 10.361416] elogind[4140]: Watching system buttons on /dev/input/event22 (Logitech USB Receiver) [ 12.063225] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [ 12.675731] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 12.698272] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 12.698381] NFSD: starting 90-second grace period (net ffffffff822f6e80) [ 12.947583] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 12.952644] elogind[4140]: New session c1 of user gdm. [ 12.957696] br0: port 1(eno1) entered blocking state [ 12.957697] br0: port 1(eno1) entered disabled state [ 12.957737] device eno1 entered promiscuous mode [ 12.960842] device br0 entered promiscuous mode [ 12.961842] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready [ 12.973891] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready [ 13.197093] radeon_dp_aux_transfer_native: 158 callbacks suppressed [ 13.205897] Ebtables v2.0 registered [ 14.999127] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 14.999155] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready [ 14.999174] br0: port 1(eno1) entered blocking state [ 14.999174] br0: port 1(eno1) entered forwarding state [ 14.999212] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready [ 20.310966] elogind[4140]: New session 2 of user richard. [ 20.770119] radeon_dp_aux_transfer_native: 158 callbacks suppressed [ 22.465100] rfkill: input handler disabled [ 43.535674] gnome-shell[5830]: segfault at 1a0016 ip 00007fedc8fb2f93 sp 00007fff2f3cc4a0 error 4 in libgobject-2.0.so.0.5600.1[7fedc8f7f000+51000]