$ cat Xorg.0.log [ 51.121] X.Org X Server 1.19.3 Release Date: 2017-03-15 [ 51.121] X Protocol Version 11, Revision 0 [ 51.121] Build Operating System: Linux 4.4.6-gentoo x86_64 Gentoo [ 51.121] Current Operating System: Linux lappi 4.9.16-gentoo #2 SMP Mon Jul 3 23:36:29 CEST 2017 x86_64 [ 51.121] Kernel command line: root=/dev/ram0 crypt_root=/dev/disk/by-uuid/4b24b732-067b-4e79-9621-4b634495d9a8 dolvm real_root=/dev/mapper/vg1-root rootfstype=ext4 real_init=/sbin/init root_keydev=/dev/disk/by-partuuid/8f4232f1-dda0-480a-96b1-1345a3e9ecc0 root_key=luks-key.gpg real_resume=/dev/mapper/vg1-swap keymap=de [ 51.121] Build Date: 29 June 2017 04:41:15AM [ 51.122] [ 51.123] Current version of pixman: 0.34.0 [ 51.126] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 51.126] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 51.130] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jul 4 20:34:26 2017 [ 51.137] (==) Using config file: "/etc/X11/xorg.conf" [ 51.139] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 51.140] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 51.144] (==) No Layout section. Using the first Screen section. [ 51.144] (==) No screen section available. Using defaults. [ 51.144] (**) |-->Screen "Default Screen Section" (0) [ 51.144] (**) | |-->Monitor "" [ 51.144] (==) No device specified for screen "Default Screen Section". Using the first device section listed. [ 51.144] (**) | |-->Device "intel" [ 51.144] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 51.144] (==) Automatically adding devices [ 51.144] (==) Automatically enabling devices [ 51.144] (==) Automatically adding GPU devices [ 51.144] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 51.147] (WW) The directory "/usr/share/fonts/TTF/" does not exist. [ 51.147] Entry deleted from font path. [ 51.147] (WW) The directory "/usr/share/fonts/OTF/" does not exist. [ 51.147] Entry deleted from font path. [ 51.147] (WW) The directory "/usr/share/fonts/Type1/" does not exist. [ 51.147] Entry deleted from font path. [ 51.149] (==) FontPath set to: /usr/share/fonts/misc/, /usr/share/fonts/100dpi/, /usr/share/fonts/75dpi/ [ 51.149] (==) ModulePath set to "/usr/lib64/xorg/modules" [ 51.149] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 51.149] (II) Loader magic: 0x811cc0 [ 51.149] (II) Module ABI versions: [ 51.149] X.Org ANSI C Emulation: 0.4 [ 51.149] X.Org Video Driver: 23.0 [ 51.149] X.Org XInput driver : 24.1 [ 51.149] X.Org Server Extension : 10.0 [ 51.149] (II) xfree86: Adding drm device (/dev/dri/card0) [ 51.161] (--) PCI:*(0:0:2:0) 8086:0126:103c:162a rev 9, Mem @ 0xd4000000/4194304, 0xc0000000/268435456, I/O @ 0x00004000/64, BIOS @ 0x????????/131072 [ 51.161] (II) LoadModule: "glx" [ 51.171] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so [ 51.216] (II) Module glx: vendor="X.Org Foundation" [ 51.216] compiled for 1.19.3, module version = 1.0.0 [ 51.217] ABI class: X.Org Server Extension, version 10.0 [ 51.217] (II) LoadModule: "intel" [ 51.217] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so [ 51.226] (II) Module intel: vendor="X.Org Foundation" [ 51.226] compiled for 1.19.3, module version = 2.99.917 [ 51.226] Module class: X.Org Video Driver [ 51.226] ABI class: X.Org Video Driver, version 23.0 [ 51.226] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 [ 51.226] (II) intel: Driver for Intel(R) HD Graphics [ 51.226] (II) intel: Driver for Intel(R) Iris(TM) Graphics [ 51.226] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics [ 51.226] (--) using VT number 7 [ 51.259] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160919 [ 51.267] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 3000 [ 51.267] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx; using a maximum of 2 threads [ 51.267] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 51.267] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 51.267] (==) intel(0): RGB weight 888 [ 51.267] (==) intel(0): Default visual is TrueColor [ 51.268] (II) intel(0): Output LVDS1 has no monitor section [ 51.268] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output LVDS1 [ 51.268] (II) intel(0): Enabled output LVDS1 [ 51.268] (II) intel(0): Output VGA1 has no monitor section [ 51.268] (II) intel(0): Enabled output VGA1 [ 51.268] (II) intel(0): Output HDMI1 has no monitor section [ 51.269] (II) intel(0): Enabled output HDMI1 [ 51.269] (II) intel(0): Output DP1 has no monitor section [ 51.269] (II) intel(0): Enabled output DP1 [ 51.269] (--) intel(0): Using a maximum size of 256x256 for hardware cursors [ 51.269] (II) intel(0): Output VIRTUAL1 has no monitor section [ 51.269] (II) intel(0): Enabled output VIRTUAL1 [ 51.269] (--) intel(0): Output LVDS1 using initial mode 1280x800 on pipe 0 [ 51.269] (==) intel(0): TearFree disabled [ 51.269] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) [ 51.269] (==) intel(0): DPI set to (96, 96) [ 51.269] (II) Loading sub module "dri3" [ 51.269] (II) LoadModule: "dri3" [ 51.269] (II) Module "dri3" already built-in [ 51.269] (II) Loading sub module "dri2" [ 51.269] (II) LoadModule: "dri2" [ 51.269] (II) Module "dri2" already built-in [ 51.269] (II) Loading sub module "present" [ 51.269] (II) LoadModule: "present" [ 51.269] (II) Module "present" already built-in [ 51.270] (==) Depth 24 pixmap format is 32 bpp [ 51.287] (II) intel(0): SNA initialized with Sandybridge (gen6, gt2) backend [ 51.287] (==) intel(0): Backing store enabled [ 51.287] (==) intel(0): Silken mouse enabled [ 51.290] (II) intel(0): HW Cursor enabled [ 51.290] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 51.292] (==) intel(0): DPMS enabled [ 51.293] (==) intel(0): Display hotplug detection enabled [ 51.293] (II) intel(0): [DRI2] Setup complete [ 51.293] (II) intel(0): [DRI2] DRI driver: i965 [ 51.293] (II) intel(0): [DRI2] VDPAU driver: va_gl [ 51.293] (II) intel(0): direct rendering: DRI2 enabled [ 51.293] (II) intel(0): hardware support for Present enabled [ 51.293] (--) RandR disabled [ 51.381] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 51.381] (II) AIGLX: enabled GLX_ARB_create_context [ 51.381] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 51.381] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile [ 51.381] (II) AIGLX: enabled GLX_INTEL_swap_event [ 51.381] (II) AIGLX: enabled GLX_SGI_swap_control [ 51.381] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB [ 51.381] (II) AIGLX: enabled GLX_ARB_fbconfig_float [ 51.381] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float [ 51.381] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 51.381] (II) AIGLX: enabled GLX_ARB_create_context_robustness [ 51.381] (II) AIGLX: Loaded and initialized i965 [ 51.381] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 51.386] (II) intel(0): switch to mode 1280x800@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none [ 51.393] (II) intel(0): Setting screen physical size to 338 x 211 [ 51.480] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 51.480] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 51.480] (**) Power Button: Applying InputClass "system-keyboard" [ 51.480] (II) LoadModule: "evdev" [ 51.480] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 51.488] (II) Module evdev: vendor="X.Org Foundation" [ 51.488] compiled for 1.19.3, module version = 2.10.5 [ 51.488] Module class: X.Org XInput Driver [ 51.488] ABI class: X.Org XInput driver, version 24.1 [ 51.488] (II) Using input driver 'evdev' for 'Power Button' [ 51.488] (**) Power Button: always reports core events [ 51.488] (**) evdev: Power Button: Device: "/dev/input/event2" [ 51.488] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 51.488] (--) evdev: Power Button: Found keys [ 51.488] (II) evdev: Power Button: Configuring as keyboard [ 51.488] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event2" [ 51.488] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 51.488] (**) Option "xkb_rules" "evdev" [ 51.488] (**) Option "xkb_layout" "de" [ 51.531] (II) config/udev: Adding input device Video Bus (/dev/input/event4) [ 51.531] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 51.531] (**) Video Bus: Applying InputClass "system-keyboard" [ 51.531] (II) Using input driver 'evdev' for 'Video Bus' [ 51.531] (**) Video Bus: always reports core events [ 51.531] (**) evdev: Video Bus: Device: "/dev/input/event4" [ 51.531] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 51.531] (--) evdev: Video Bus: Found keys [ 51.531] (II) evdev: Video Bus: Configuring as keyboard [ 51.531] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input10/event4" [ 51.531] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 51.531] (**) Option "xkb_rules" "evdev" [ 51.531] (**) Option "xkb_layout" "de" [ 51.532] (II) config/udev: Adding input device Lid Switch (/dev/input/event1) [ 51.532] (II) No input driver specified, ignoring this device. [ 51.532] (II) This device may have been added with another device file. [ 51.532] (II) config/udev: Adding input device Sleep Button (/dev/input/event0) [ 51.532] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 51.532] (**) Sleep Button: Applying InputClass "system-keyboard" [ 51.532] (II) Using input driver 'evdev' for 'Sleep Button' [ 51.532] (**) Sleep Button: always reports core events [ 51.532] (**) evdev: Sleep Button: Device: "/dev/input/event0" [ 51.532] (--) evdev: Sleep Button: Vendor 0 Product 0x3 [ 51.532] (--) evdev: Sleep Button: Found keys [ 51.532] (II) evdev: Sleep Button: Configuring as keyboard [ 51.532] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6/event0" [ 51.532] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8) [ 51.532] (**) Option "xkb_rules" "evdev" [ 51.532] (**) Option "xkb_layout" "de" [ 51.533] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event5) [ 51.533] (II) No input driver specified, ignoring this device. [ 51.533] (II) This device may have been added with another device file. [ 51.533] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event6) [ 51.533] (II) No input driver specified, ignoring this device. [ 51.533] (II) This device may have been added with another device file. [ 51.534] (II) config/udev: Adding input device HDA Intel PCH Dock Line Out (/dev/input/event7) [ 51.534] (II) No input driver specified, ignoring this device. [ 51.534] (II) This device may have been added with another device file. [ 51.534] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event8) [ 51.534] (II) No input driver specified, ignoring this device. [ 51.534] (II) This device may have been added with another device file. [ 51.534] (II) config/udev: Adding input device HDA Intel PCH HDMI (/dev/input/event9) [ 51.534] (II) No input driver specified, ignoring this device. [ 51.534] (II) This device may have been added with another device file. [ 51.534] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event11) [ 51.534] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 51.534] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard" [ 51.534] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 51.534] (**) AT Translated Set 2 keyboard: always reports core events [ 51.534] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event11" [ 51.534] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 51.534] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 51.534] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 51.535] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input16/event11" [ 51.535] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9) [ 51.535] (**) Option "xkb_rules" "evdev" [ 51.535] (**) Option "xkb_layout" "de" [ 51.535] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event12) [ 51.535] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall" [ 51.535] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse' [ 51.535] (**) PS/2 Generic Mouse: always reports core events [ 51.535] (**) evdev: PS/2 Generic Mouse: Device: "/dev/input/event12" [ 51.535] (--) evdev: PS/2 Generic Mouse: Vendor 0x2 Product 0x1 [ 51.535] (--) evdev: PS/2 Generic Mouse: Found 3 mouse buttons [ 51.535] (--) evdev: PS/2 Generic Mouse: Found relative axes [ 51.535] (--) evdev: PS/2 Generic Mouse: Found x and y relative axes [ 51.535] (II) evdev: PS/2 Generic Mouse: Configuring as mouse [ 51.535] (**) evdev: PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5 [ 51.535] (**) evdev: PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 51.535] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input20/event12" [ 51.535] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 10) [ 51.535] (II) evdev: PS/2 Generic Mouse: initialized for relative axes. [ 51.535] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1 [ 51.535] (**) PS/2 Generic Mouse: (accel) acceleration profile 0 [ 51.535] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000 [ 51.535] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4 [ 51.536] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse1) [ 51.536] (II) No input driver specified, ignoring this device. [ 51.536] (II) This device may have been added with another device file. [ 51.536] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event10) [ 51.536] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall" [ 51.536] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall" [ 51.536] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons" [ 51.536] (II) LoadModule: "synaptics" [ 51.536] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so [ 51.539] (II) Module synaptics: vendor="X.Org Foundation" [ 51.539] compiled for 1.19.3, module version = 1.9.0 [ 51.539] Module class: X.Org XInput Driver [ 51.539] ABI class: X.Org XInput driver, version 24.1 [ 51.539] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad' [ 51.539] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 51.539] (**) Option "Device" "/dev/input/event10" [ 51.630] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device [ 51.630] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5932 (res 75) [ 51.630] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 5164 (res 219) [ 51.630] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255 [ 51.630] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15 [ 51.630] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple [ 51.630] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7 [ 51.630] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 51.630] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 51.730] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input5/event10" [ 51.730] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11) [ 51.730] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5 [ 51.730] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75 [ 51.730] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.034 [ 51.730] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 [ 51.730] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1 [ 51.730] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 51.730] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 51.730] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 51.731] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0) [ 51.731] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates" [ 51.732] (II) config/udev: Adding input device PC Speaker (/dev/input/event3) [ 51.732] (II) No input driver specified, ignoring this device. [ 51.732] (II) This device may have been added with another device file. [ 51.732] (II) config/udev: Adding input device Serial Wacom Tablet WACf00e (/dev/ttyS0) [ 51.732] (**) Serial Wacom Tablet WACf00e: Applying InputClass "Wacom serial class" [ 51.732] (**) Serial Wacom Tablet WACf00e: Applying InputClass "Wacom serial class identifiers" [ 51.732] (II) LoadModule: "wacom" [ 51.732] (II) Loading /usr/lib64/xorg/modules/input/wacom_drv.so [ 51.741] (II) Module wacom: vendor="X.Org Foundation" [ 51.741] compiled for 1.19.3, module version = 0.34.0 [ 51.741] Module class: X.Org XInput Driver [ 51.741] ABI class: X.Org XInput driver, version 24.1 [ 51.741] (II) wacom: Driver for Wacom graphics tablets: PenPartner, Graphire, Graphire2 4x5, Graphire2 5x7, Graphire3 4x5, Graphire3 6x8, Graphire4 4x5, Graphire4 6x8, BambooFun 4x5, BambooFun 6x8, Bamboo1 Medium, Graphire4 6x8 BlueTooth, CTL-460, CTH-461, CTL-660, CTL-461/S, Bamboo Touch, CTH-460/K, CTH-461/S, CTH-661/S1, CTH-461/L, CTH-661/L, Intuos 4x5, Intuos 6x8, Intuos 9x12, Intuos 12x12, Intuos 12x18, PTU600, PL400, PL500, PL600, PL600SX, PL550, PL800, PL700, PL510, PL710, DTI520, DTF720, DTF720a, DTF521, DTU1931, DTU2231, DTU1631, Intuos2 4x5, Intuos2 6x8, Intuos2 9x12, Intuos2 12x12, Intuos2 12x18, Intuos2 6x8 , Volito, PenStation, Volito2 4x5, Volito2 2x3, PenPartner2, Bamboo, Bamboo1, Bamboo1 4x6, Bamboo1 5x8, Intuos3 4x5, Intuos3 6x8, Intuos3 9x12, Intuos3 12x12, Intuos3 12x19, Intuos3 6x11, Intuos3 4x6, Intuos4 4x6, Intuos4 6x9, Intuos4 8x13, Intuos4 12x19, Intuos4 WL USB Endpoint, Intuos4 WL Bluetooth Endpoint, Intuos5 touch S, Intuos5 touch M, Intuos5 touch L, Intuos5 S, Intuos5 M, Intuos Pro S, Intuos Pro M, Intuos Pro L, Cintiq 21UX, Cintiq 20WSX, Cintiq 12WX, Cintiq 21UX2, Cintiq 24HD, Cintiq 22HD, Cintiq 24HD touch (EMR digitizer), Cintiq 13HD, DTK2241, DTH2242, Cintiq 22HDT, TabletPC 0x90, TabletPC 0x93, TabletPC 0x97, TabletPC 0x9A, CapPlus 0x9F, TabletPC 0xE2, TabletPC 0xE3, TabletPC 0xE5, TabletPC 0xE6, TabletPC 0xEC, TabletPC 0xED, TabletPC 0xEF, TabletPC 0x100, TabletPC 0x101, TabletPC 0x10D, TabletPC 0x116, TabletPC 0x12C, TabletPC 0x4001, TabletPC 0x4004, TabletPC 0x5000, TabletPC 0x5002, usb:172f:0024, usb:172f:0025, usb:172f:0026, usb:172f:0027, usb:172f:0028, usb:172f:0030, usb:172f:0031, usb:172f:0032, usb:172f:0033, usb:172f:0034, usb:172f:0035, usb:172f:0036, usb:172f:0037, usb:172f:0038, usb:172f:0039, usb:172f:0051, usb:172f:0052, usb:172f:0053, usb:172f:0054, usb:172f:0055, usb:172f:0056, usb:172f:0057, usb:172f:0058, usb:172f:0500, usb:172f:0501, usb:172f:0502, usb:172f:0503, usb:1b96:0001, usb:17ef:6004 [ 51.742] (II) Using input driver 'wacom' for 'Serial Wacom Tablet WACf00e' [ 51.742] (**) Serial Wacom Tablet WACf00e: always reports core events [ 51.742] (**) Option "Device" "/dev/ttyS0" [ 51.743] (**) Option "StopBits" "1" [ 51.743] (**) Option "DataBits" "8" [ 51.743] (**) Option "Parity" "None" [ 51.743] (**) Option "Vmin" "1" [ 51.743] (**) Option "Vtime" "10" [ 51.743] (**) Option "FlowControl" "Xoff" [ 51.743] (II) Serial Wacom Tablet WACf00e: type not specified, assuming 'stylus'. [ 51.743] (II) Serial Wacom Tablet WACf00e: other types will be automatically added. [ 551.953] (II) Serial Wacom Tablet WACf00e stylus: serial tablet id 0xE3. [ 551.953] (--) Serial Wacom Tablet WACf00e stylus: using pressure threshold of 873 for button 1 [ 551.953] (--) Serial Wacom Tablet WACf00e stylus: maxX=26312 maxY=16520 maxZ=255 resX=100000 resY=100000 tilt=disabled [ 551.954] (II) Serial Wacom Tablet WACf00e stylus: hotplugging dependent devices. [ 551.954] (EE) Serial Wacom Tablet WACf00e stylus: Invalid type 'cursor' for this device. [ 551.954] (EE) Serial Wacom Tablet WACf00e stylus: Invalid type 'pad' for this device. [ 551.954] (II) Serial Wacom Tablet WACf00e stylus: hotplugging completed. [ 551.954] (**) Option "config_info" "udev:/sys/devices/pnp0/00:04/tty/ttyS0" [ 551.954] (II) XINPUT: Adding extended input device "Serial Wacom Tablet WACf00e stylus" (type: STYLUS, id 12) [ 551.955] (**) Serial Wacom Tablet WACf00e stylus: (accel) keeping acceleration scheme 1 [ 551.955] (**) Serial Wacom Tablet WACf00e stylus: (accel) acceleration profile 0 [ 551.955] (**) Serial Wacom Tablet WACf00e stylus: (accel) acceleration factor: 2.000 [ 551.955] (**) Serial Wacom Tablet WACf00e stylus: (accel) acceleration threshold: 4 [ 551.955] (**) Option "BaudRate" "38400" [ 551.971] (**) Serial Wacom Tablet WACf00e eraser: Applying InputClass "Wacom serial class" [ 551.971] (**) Serial Wacom Tablet WACf00e eraser: Applying InputClass "Wacom serial class identifiers" [ 551.971] (II) Using input driver 'wacom' for 'Serial Wacom Tablet WACf00e eraser' [ 551.971] (**) Serial Wacom Tablet WACf00e eraser: always reports core events [ 551.971] (**) Option "Device" "/dev/ttyS0" [ 551.971] (**) Option "Type" "eraser" [ 551.971] (**) Option "BaudRate" "38400" [ 551.971] (**) Option "StopBits" "1" [ 551.971] (**) Option "DataBits" "8" [ 551.971] (**) Option "Parity" "None" [ 551.971] (**) Option "Vmin" "1" [ 551.971] (**) Option "Vtime" "10" [ 551.971] (**) Option "FlowControl" "Xoff" [ 551.971] (--) Serial Wacom Tablet WACf00e eraser: maxX=26312 maxY=16520 maxZ=255 resX=100000 resY=100000 tilt=disabled [ 551.971] (**) Option "config_info" "udev:/sys/devices/pnp0/00:04/tty/ttyS0" [ 551.971] (II) XINPUT: Adding extended input device "Serial Wacom Tablet WACf00e eraser" (type: ERASER, id 13) [ 551.972] (**) Serial Wacom Tablet WACf00e eraser: (accel) keeping acceleration scheme 1 [ 551.972] (**) Serial Wacom Tablet WACf00e eraser: (accel) acceleration profile 0 [ 551.972] (**) Serial Wacom Tablet WACf00e eraser: (accel) acceleration factor: 2.000 [ 551.972] (**) Serial Wacom Tablet WACf00e eraser: (accel) acceleration threshold: 4 [ 551.973] (**) Serial Wacom Tablet WACf00e touch: Applying InputClass "Wacom serial class" [ 551.973] (**) Serial Wacom Tablet WACf00e touch: Applying InputClass "Wacom serial class identifiers" [ 551.973] (II) Using input driver 'wacom' for 'Serial Wacom Tablet WACf00e touch' [ 551.973] (**) Serial Wacom Tablet WACf00e touch: always reports core events [ 551.973] (**) Option "Device" "/dev/ttyS0" [ 551.973] (**) Option "Type" "touch" [ 551.973] (**) Option "BaudRate" "38400" [ 551.973] (**) Option "StopBits" "1" [ 551.973] (**) Option "DataBits" "8" [ 551.973] (**) Option "Parity" "None" [ 551.973] (**) Option "Vmin" "1" [ 551.973] (**) Option "Vtime" "10" [ 551.973] (**) Option "FlowControl" "Xoff" [ 551.973] (--) Serial Wacom Tablet WACf00e touch: maxX=2640 maxY=1630 maxZ=255 resX=10000 resY=10000 [ 551.973] (**) Option "config_info" "udev:/sys/devices/pnp0/00:04/tty/ttyS0" [ 551.973] (II) XINPUT: Adding extended input device "Serial Wacom Tablet WACf00e touch" (type: TOUCH, id 14) [ 551.974] (**) Serial Wacom Tablet WACf00e touch: (accel) keeping acceleration scheme 1 [ 551.974] (**) Serial Wacom Tablet WACf00e touch: (accel) acceleration profile 0 [ 551.974] (**) Serial Wacom Tablet WACf00e touch: (accel) acceleration factor: 2.000 [ 551.974] (**) Serial Wacom Tablet WACf00e touch: (accel) acceleration threshold: 4 [ 551.975] (II) intel(0): EDID vendor "SEC", prod id 22337 [ 551.975] (II) intel(0): Printing DDC gathered Modelines: [ 551.975] (II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1296 1344 1353 800 801 804 854 -hsync -vsync (51.2 kHz eP) [ 551.975] (II) intel(0): Modeline "1280x800"x0.0 46.20 1280 1296 1344 1353 800 801 804 854 -hsync -vsync (34.1 kHz e) $ cat dmesg [ 0.000000] BIOS-e820: [mem 0x00000000bc305000-0x00000000bcc34fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bcc35000-0x00000000bceb4fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bceb5000-0x00000000bcffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bcfff000-0x00000000bcffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffe90000-0x00000000ffe96fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013dffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0xb6ce0018-0xb6cf0057] usable ==> usable [ 0.000000] e820: update [mem 0xb6cd7018-0xb6cdf657] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000008efff] usable [ 0.000000] reserve setup_data: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x0000000000090000-0x000000000009ffff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000b6cd7017] usable [ 0.000000] reserve setup_data: [mem 0x00000000b6cd7018-0x00000000b6cdf657] usable [ 0.000000] reserve setup_data: [mem 0x00000000b6cdf658-0x00000000b6ce0017] usable [ 0.000000] reserve setup_data: [mem 0x00000000b6ce0018-0x00000000b6cf0057] usable [ 0.000000] reserve setup_data: [mem 0x00000000b6cf0058-0x00000000b99f3fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000b99f4000-0x00000000b9d25fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000b9d26000-0x00000000bc304fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000bc305000-0x00000000bcc34fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000bcc35000-0x00000000bceb4fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000bceb5000-0x00000000bcffefff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000bcfff000-0x00000000bcffffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ffe90000-0x00000000ffe96fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000013dffffff] usable [ 0.000000] efi: EFI v2.00 by HPQ [ 0.000000] efi: ACPI=0xbcffe000 ACPI 2.0=0xbcffe014 SMBIOS=0xbc3e5698 [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Hewlett-Packard HP EliteBook 2760p/162A, BIOS 68SOU Ver. F.22 01/05/2012 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x13e000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 0BE000000 mask FFE000000 uncachable [ 0.000000] 4 base 0BD800000 mask FFF800000 uncachable [ 0.000000] 5 base 100000000 mask FC0000000 write-back [ 0.000000] 6 base 13E000000 mask FFE000000 uncachable [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: last_pfn = 0xbd000 max_arch_pfn = 0x400000000 [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] BRK [0x08b23000, 0x08b23fff] PGTABLE [ 0.000000] BRK [0x08b24000, 0x08b24fff] PGTABLE [ 0.000000] BRK [0x08b25000, 0x08b25fff] PGTABLE [ 0.000000] BRK [0x08b26000, 0x08b26fff] PGTABLE [ 0.000000] BRK [0x08b27000, 0x08b27fff] PGTABLE [ 0.000000] BRK [0x08b28000, 0x08b28fff] PGTABLE [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000BCFFE014 000024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 0x00000000BCFFE120 00007C (v01 HPQOEM SLIC-MPC 0000000F 01000013) [ 0.000000] ACPI: FACP 0x00000000BCFFC000 0000F4 (v03 HPQOEM 162A 0000000F HP 00000001) [ 0.000000] ACPI: DSDT 0x00000000BCFD1000 025541 (v02 HPQOEM 162A 00000001 INTL 20060912) [ 0.000000] ACPI: FACS 0x00000000BCE7E000 000040 [ 0.000000] ACPI: FACS 0x00000000BCE7E000 000040 [ 0.000000] ACPI: HPET 0x00000000BCFFB000 000038 (v01 HPQOEM 162A 00000001 HP 00000001) [ 0.000000] ACPI: APIC 0x00000000BCFFA000 0000BC (v01 HPQOEM 162A 00000001 HP 00000001) [ 0.000000] ACPI: MCFG 0x00000000BCFF9000 00003C (v01 HPQOEM 162A 00000001 HP 00000001) [ 0.000000] ACPI: TCPA 0x00000000BCFF7000 000032 (v02 HPQOEM 162A 00000000 HP 00000001) [ 0.000000] ACPI: SSDT 0x00000000BCFCE000 000266 (v01 HPQOEM SataAhci 00001000 INTL 20060912) [ 0.000000] ACPI: SSDT 0x00000000BCFCD000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20060912) [ 0.000000] ACPI: SLIC 0x00000000BCFCC000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) [ 0.000000] ACPI: SSDT 0x00000000BCFCB000 000810 (v01 PmRef Cpu0Ist 00003000 INTL 20060912) [ 0.000000] ACPI: SSDT 0x00000000BCFCA000 0009B1 (v01 PmRef CpuPm 00003000 INTL 20060912) [ 0.000000] ACPI: ASF! 0x00000000BCFF8000 0000A5 (v32 HPQOEM 162A 00000001 HP 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000013dffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000008efff] [ 0.000000] node 0: [mem 0x0000000000090000-0x000000000009ffff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000b99f3fff] [ 0.000000] node 0: [mem 0x00000000b9d26000-0x00000000bc304fff] [ 0.000000] node 0: [mem 0x00000000bcfff000-0x00000000bcffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000013dffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013dffffff] [ 0.000000] On node 0 totalpages: 1023858 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1182 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10472 pages used for memmap [ 0.000000] DMA32 zone: 765908 pages, LIFO batch:31 [ 0.000000] Normal zone: 3472 pages used for memmap [ 0.000000] Normal zone: 253952 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at 0x00000000bda00000-0x00000000bf9fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xb6cd7000-0xb6cd7fff] [ 0.000000] PM: Registered nosave memory: [mem 0xb6cdf000-0xb6cdffff] [ 0.000000] PM: Registered nosave memory: [mem 0xb6ce0000-0xb6ce0fff] [ 0.000000] PM: Registered nosave memory: [mem 0xb6cf0000-0xb6cf0fff] [ 0.000000] PM: Registered nosave memory: [mem 0xb99f4000-0xb9d25fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbc305000-0xbcc34fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbcc35000-0xbceb4fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbceb5000-0xbcffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xbd000000-0xbd9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbda00000-0xbf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfa00000-0xe00f7fff] [ 0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff] [ 0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffe8ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffe90000-0xffe96fff] [ 0.000000] PM: Registered nosave memory: [mem 0xffe97000-0xffffffff] [ 0.000000] e820: [mem 0xbfa00000-0xe00f7fff] available for PCI devices [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 33 pages/cpu @ffff88013dc00000 s95064 r8192 d31912 u262144 [ 0.000000] pcpu-alloc: s95064 r8192 d31912 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1008676 [ 0.000000] Kernel command line: root=/dev/ram0 crypt_root=/dev/disk/by-uuid/4b24b732-067b-4e79-9621-4b634495d9a8 dolvm real_root=/dev/mapper/vg1-root rootfstype=ext4 real_init=/sbin/init root_keydev=/dev/disk/by-partuuid/8f4232f1-dda0-480a-96b1-1345a3e9ecc0 root_key=luks-key.gpg real_resume=/dev/mapper/vg1-swap keymap=de [ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 28672 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 65536 bytes [ 0.000000] early log buf free: 20544(62%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3722932K/4095432K available (4388K kernel code, 422K rwdata, 1500K rodata, 117100K init, 340K bss, 372500K reserved, 0K cma-reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8 [ 0.000000] NR_IRQS:4352 nr_irqs:488 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2494.404 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.80 BogoMIPS (lpj=24944040) [ 0.000010] pid_max: default: 32768 minimum: 301 [ 0.000018] ACPI: Core revision 20160831 [ 0.010465] ACPI: 5 ACPI AML tables successfully acquired and loaded [ 0.013453] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.013458] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.013663] CPU: Physical Processor ID: 0 [ 0.013666] CPU: Processor Core ID: 0 [ 0.013672] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.013675] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.013680] mce: CPU supports 7 MCE banks [ 0.013689] CPU0: Thermal monitoring enabled (TM1) [ 0.013700] process: using mwait in idle threads [ 0.013706] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.013709] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.014098] Freeing SMP alternatives memory: 24K (ffffffff88ac6000 - ffffffff88acc000) [ 0.031307] smpboot: Max logical packages: 4 [ 0.031730] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.131745] TSC deadline timer enabled [ 0.131748] smpboot: CPU0: Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz (family: 0x6, model: 0x2a, stepping: 0x7) [ 0.131757] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.131782] core: PEBS disabled due to CPU errata, please upgrade microcode [ 0.131786] ... version: 3 [ 0.131789] ... bit width: 48 [ 0.131792] ... generic registers: 4 [ 0.131795] ... value mask: 0000ffffffffffff [ 0.131798] ... max period: 00007fffffffffff [ 0.131801] ... fixed-purpose events: 3 [ 0.131804] ... event mask: 000000070000000f [ 0.132098] x86: Booting SMP configuration: [ 0.132101] .... node #0, CPUs: #1 #2 #3 [ 0.583856] x86: Booted up 1 node, 4 CPUs [ 0.583863] smpboot: Total of 4 processors activated (19956.72 BogoMIPS) [ 0.586546] devtmpfs: initialized [ 0.586831] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes) [ 0.586836] PM: Registering ACPI NVS region [mem 0xbcc35000-0xbceb4fff] (2621440 bytes) [ 0.586951] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.586959] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.587094] NET: Registered protocol family 16 [ 0.621839] cpuidle: using governor ladder [ 0.661852] cpuidle: using governor menu [ 0.662021] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.662025] ACPI: bus type PCI registered [ 0.662100] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.662106] PCI: not using MMCONFIG [ 0.662110] PCI: Using configuration type 1 for base access [ 0.662191] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.692162] ACPI: Added _OSI(Module Device) [ 0.692166] ACPI: Added _OSI(Processor Device) [ 0.692169] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.692172] ACPI: Added _OSI(Processor Aggregator Device) [ 0.692357] ACPI: Executed 1 blocks of module-level executable AML code [ 0.699806] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.725450] ACPI: Dynamic OEM Table Load: [ 0.725462] ACPI: SSDT 0xFFFF88013D35B800 00074D (v01 PmRef Cpu0Cst 00003001 INTL 20060912) [ 0.725790] ACPI: Dynamic OEM Table Load: [ 0.725801] ACPI: SSDT 0xFFFF88013D339400 000303 (v01 PmRef ApIst 00003000 INTL 20060912) [ 0.726050] ACPI: Dynamic OEM Table Load: [ 0.726059] ACPI: SSDT 0xFFFF88013D3A2E00 000119 (v01 PmRef ApCst 00003000 INTL 20060912) [ 0.726872] ACPI : EC: EC started [ 6.183896] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC [ 6.183900] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 6.183905] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions [ 6.183908] ACPI: Interpreter enabled [ 6.183930] ACPI: (supports S0 S3 S4 S5) [ 6.183933] ACPI: Using IOAPIC for interrupt routing [ 6.183960] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 6.184272] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 6.184291] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 6.186099] ACPI: Power Resource [APPR] (off) [ 6.187915] ACPI: Power Resource [COMP] (on) [ 6.188117] ACPI: Power Resource [LPP] (on) [ 6.191907] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 6.191914] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 6.193585] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 6.193590] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 6.193911] PCI host bridge to bus 0000:00 [ 6.193915] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 6.193920] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 6.193924] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 6.193928] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xdfffffff window] [ 6.193932] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff window] [ 6.193936] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff window] [ 6.193940] pci_bus 0000:00: root bus resource [bus 00-3e] [ 6.193950] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 6.194053] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000 [ 6.194062] pci 0000:00:02.0: reg 0x10: [mem 0xd4000000-0xd43fffff 64bit] [ 6.194067] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 6.194071] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f] [ 6.194189] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 6.194209] pci 0000:00:16.0: reg 0x10: [mem 0xd4724000-0xd472400f 64bit] [ 6.194292] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 6.194385] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 [ 6.194401] pci 0000:00:19.0: reg 0x10: [mem 0xd4700000-0xd471ffff] [ 6.194409] pci 0000:00:19.0: reg 0x14: [mem 0xd472a000-0xd472afff] [ 6.194417] pci 0000:00:19.0: reg 0x18: [io 0x4060-0x407f] [ 6.194484] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 6.194530] pci 0000:00:19.0: System wakeup disabled by ACPI [ 6.194580] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 6.194595] pci 0000:00:1a.0: reg 0x10: [mem 0xd4729000-0xd47293ff] [ 6.194673] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 6.194721] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 6.194770] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 6.194785] pci 0000:00:1b.0: reg 0x10: [mem 0xd4720000-0xd4723fff 64bit] [ 6.194854] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 6.194943] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 6.195024] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 6.195116] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 [ 6.195194] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 6.195249] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 6.195299] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400 [ 6.195385] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 6.195434] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 6.195483] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 [ 6.195568] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 6.195616] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 6.195669] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 6.195685] pci 0000:00:1d.0: reg 0x10: [mem 0xd4728000-0xd47283ff] [ 6.195763] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 6.195809] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 6.195858] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100 [ 6.196045] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 [ 6.196060] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f] [ 6.196068] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097] [ 6.196075] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087] [ 6.196083] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093] [ 6.196091] pci 0000:00:1f.2: reg 0x20: [io 0x4040-0x405f] [ 6.196098] pci 0000:00:1f.2: reg 0x24: [mem 0xd4727000-0xd47277ff] [ 6.196146] pci 0000:00:1f.2: PME# supported from D3hot [ 6.196272] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 6.196281] pci 0000:00:1c.0: bridge window [mem 0xd4600000-0xd46fffff] [ 6.196331] pci 0000:00:1c.1: PCI bridge to [bus 02-22] [ 6.196338] pci 0000:00:1c.1: bridge window [io 0x2000-0x3fff] [ 6.196341] pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd3ffffff] [ 6.196419] pci 0000:23:00.0: [197b:2380] type 00 class 0x0c0010 [ 6.196454] pci 0000:23:00.0: reg 0x10: [mem 0xd4500000-0xd45007ff] [ 6.196477] pci 0000:23:00.0: reg 0x14: [mem 0xd4505000-0xd45050ff] [ 6.196781] pci 0000:23:00.1: [197b:2392] type 00 class 0x088000 [ 6.196806] pci 0000:23:00.1: reg 0x10: [mem 0xd4504000-0xd45040ff] [ 6.196883] pci 0000:23:00.1: reg 0x30: [mem 0xffff8000-0xffffffff pref] [ 6.197070] pci 0000:23:00.2: [197b:2391] type 00 class 0x080501 [ 6.197100] pci 0000:23:00.2: reg 0x10: [mem 0xd4503000-0xd45030ff] [ 6.225304] pci 0000:00:1c.2: PCI bridge to [bus 23] [ 6.225326] pci 0000:00:1c.2: bridge window [mem 0xd4500000-0xd45fffff] [ 6.225453] pci 0000:24:00.0: [14e4:4727] type 00 class 0x028000 [ 6.225480] pci 0000:24:00.0: reg 0x10: [mem 0xd4400000-0xd4403fff 64bit] [ 6.225637] pci 0000:24:00.0: supports D1 D2 [ 6.225673] pci 0000:24:00.0: System wakeup disabled by ACPI [ 6.255314] pci 0000:00:1c.3: PCI bridge to [bus 24] [ 6.255335] pci 0000:00:1c.3: bridge window [mem 0xd4400000-0xd44fffff] [ 6.255388] pci_bus 0000:00: on NUMA node 0 [ 6.256272] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 6.256328] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 6.256382] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 6.256435] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 6.256489] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 6.256542] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 6.256595] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 6.256647] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 6.257033] ACPI: Enabled 5 GPEs in block 00 to 3F [ 6.257094] ACPI : EC: event unblocked [ 6.257104] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 6.257109] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events [ 6.257214] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 6.257219] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 6.257224] vgaarb: loaded [ 6.257227] vgaarb: bridge control possible 0000:00:02.0 [ 6.257294] SCSI subsystem initialized [ 6.257367] Registered efivars operations [ 6.365131] PCI: Using ACPI for IRQ routing [ 6.371767] PCI: pci_cache_line_size set to 64 bytes [ 6.371853] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff] [ 6.371854] e820: reserve RAM buffer [mem 0xb6cd7018-0xb7ffffff] [ 6.371855] e820: reserve RAM buffer [mem 0xb6ce0018-0xb7ffffff] [ 6.371856] e820: reserve RAM buffer [mem 0xb99f4000-0xbbffffff] [ 6.371857] e820: reserve RAM buffer [mem 0xbc305000-0xbfffffff] [ 6.371858] e820: reserve RAM buffer [mem 0xbd000000-0xbfffffff] [ 6.371860] e820: reserve RAM buffer [mem 0x13e000000-0x13fffffff] [ 6.372049] clocksource: Switched to clocksource hpet [ 6.372084] VFS: Disk quotas dquot_6.6.0 [ 6.372116] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 6.373885] pnp: PnP ACPI init [ 6.374027] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 6.374032] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved [ 6.374036] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 6.374041] system 00:00: [mem 0x00000000-0x00000fff] could not be reserved [ 6.374045] system 00:00: [mem 0xbfa00000-0xbfa00fff] has been reserved [ 6.374049] system 00:00: [mem 0xe0000000-0xefffffff] could not be reserved [ 6.374054] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 6.374058] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved [ 6.374062] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved [ 6.374066] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved [ 6.374072] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 6.374191] pnp 00:01: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 6.374260] system 00:02: [io 0x0200-0x027f] has been reserved [ 6.374264] system 00:02: [io 0x1000-0x100f] has been reserved [ 6.374268] system 00:02: [io 0xffff] has been reserved [ 6.374272] system 00:02: [io 0xffff] has been reserved [ 6.374276] system 00:02: [io 0x0400-0x047f] has been reserved [ 6.374280] system 00:02: [io 0x0500-0x057f] has been reserved [ 6.374284] system 00:02: [io 0xef80-0xef9f] has been reserved [ 6.374289] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 6.374316] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 6.374605] pnp 00:04: Plug and Play ACPI device, IDs WACf00e (active) [ 6.374633] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active) [ 6.374669] pnp 00:06: Plug and Play ACPI device, IDs SYN0180 SYN0100 SYN0002 PNP0f13 (active) [ 6.375082] pnp: PnP ACPI: found 7 devices [ 6.379623] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 6.379633] pci 0000:23:00.1: can't claim BAR 6 [mem 0xffff8000-0xffffffff pref]: no compatible bridge window [ 6.379659] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-22] add_size 200000 add_align 100000 [ 6.379677] pci 0000:00:1c.1: res[9]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 6.379679] pci 0000:00:1c.1: res[9]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 6.379686] pci 0000:00:1c.1: BAR 9: assigned [mem 0xbfb00000-0xbfcfffff 64bit pref] [ 6.379691] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 6.379699] pci 0000:00:1c.0: bridge window [mem 0xd4600000-0xd46fffff] [ 6.379710] pci 0000:00:1c.1: PCI bridge to [bus 02-22] [ 6.379715] pci 0000:00:1c.1: bridge window [io 0x2000-0x3fff] [ 6.379723] pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd3ffffff] [ 6.379729] pci 0000:00:1c.1: bridge window [mem 0xbfb00000-0xbfcfffff 64bit pref] [ 6.379740] pci 0000:23:00.1: BAR 6: assigned [mem 0xd4508000-0xd450ffff pref] [ 6.379744] pci 0000:00:1c.2: PCI bridge to [bus 23] [ 6.379751] pci 0000:00:1c.2: bridge window [mem 0xd4500000-0xd45fffff] [ 6.379762] pci 0000:00:1c.3: PCI bridge to [bus 24] [ 6.379769] pci 0000:00:1c.3: bridge window [mem 0xd4400000-0xd44fffff] [ 6.379781] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 6.379782] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 6.379783] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 6.379785] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xdfffffff window] [ 6.379786] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff window] [ 6.379787] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff window] [ 6.379788] pci_bus 0000:01: resource 1 [mem 0xd4600000-0xd46fffff] [ 6.379790] pci_bus 0000:02: resource 0 [io 0x2000-0x3fff] [ 6.379791] pci_bus 0000:02: resource 1 [mem 0xd0000000-0xd3ffffff] [ 6.379792] pci_bus 0000:02: resource 2 [mem 0xbfb00000-0xbfcfffff 64bit pref] [ 6.379793] pci_bus 0000:23: resource 1 [mem 0xd4500000-0xd45fffff] [ 6.379795] pci_bus 0000:24: resource 1 [mem 0xd4400000-0xd44fffff] [ 6.379895] NET: Registered protocol family 2 [ 6.380057] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 6.380111] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 6.380205] TCP: Hash tables configured (established 32768 bind 32768) [ 6.380227] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 6.380243] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 6.380306] NET: Registered protocol family 1 [ 6.380323] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 6.380338] pci 0000:00:1a.0: enabling device (0000 -> 0002) [ 6.380651] pci 0000:00:1d.0: enabling device (0000 -> 0002) [ 6.380957] PCI: CLS 64 bytes, default 64 [ 7.954104] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 7.954112] software IO TLB [mem 0xb0f01000-0xb4f01000] (64MB) mapped at [ffff8800b0f01000-ffff8800b4f00fff] [ 7.954237] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 7.954242] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 7.954245] RAPL PMU: hw unit of domain package 2^-16 Joules [ 7.954248] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules [ 7.954698] audit: initializing netlink subsys (disabled) [ 7.954714] audit: type=2000 audit(1499193222.940:1): initialized [ 7.955018] workingset: timestamp_bits=62 max_order=20 bucket_order=0 [ 7.955223] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 7.955507] gfs2: GFS2 installed [ 7.955984] NET: Registered protocol family 38 [ 7.956004] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 7.956009] io scheduler noop registered [ 7.956012] io scheduler deadline registered [ 7.956022] io scheduler cfq registered (default) [ 7.956078] pcieport 0000:00:1c.0: enabling device (0000 -> 0002) [ 7.956354] pcieport 0000:00:1c.1: enabling device (0000 -> 0003) [ 7.957043] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 7.957050] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded [ 7.957070] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt [ 7.957076] pcie_pme 0000:00:1c.1:pcie001: service driver pcie_pme loaded [ 7.957094] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt [ 7.957098] pci 0000:23:00.0: Signaling PME through PCIe PME interrupt [ 7.957102] pci 0000:23:00.1: Signaling PME through PCIe PME interrupt [ 7.957106] pci 0000:23:00.2: Signaling PME through PCIe PME interrupt [ 7.957112] pcie_pme 0000:00:1c.2:pcie001: service driver pcie_pme loaded [ 7.957130] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt [ 7.957134] pci 0000:24:00.0: Signaling PME through PCIe PME interrupt [ 7.957140] pcie_pme 0000:00:1c.3:pcie001: service driver pcie_pme loaded [ 7.957183] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 7.977988] 00:04: ttyS0 at I/O 0x280 (irq = 6, base_baud = 115200) is a 16550A [ 7.978336] Linux agpgart interface v0.103 [ 7.978371] efifb: probing for efifb [ 7.978386] efifb: framebuffer at 0xc0000000, using 3072k, total 3072k [ 7.978390] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 7.978393] efifb: scrolling: redraw [ 7.978396] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 7.980847] Console: switching to colour frame buffer device 128x48 [ 7.983336] fb0: EFI VGA frame buffer device [ 7.985606] brd: module loaded [ 7.986795] loop: module loaded [ 7.986870] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 7.988808] i8042: Detected active multiplexing controller, rev 1.1 [ 7.989541] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 7.989564] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 7.989585] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 7.989606] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 7.989627] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 7.989752] mousedev: PS/2 mouse device common for all mice [ 7.989878] rtc_cmos 00:03: RTC can wake from S4 [ 7.990043] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 7.990093] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 7.990143] device-mapper: uevent: version 1.0.3 [ 7.990200] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 7.990236] EFI Variables Facility v0.08 2004-May-17 [ 8.098735] hidraw: raw HID events driver (C) Jiri Kosina [ 8.098852] NET: Registered protocol family 10 [ 8.099053] NET: Registered protocol family 17 [ 8.099297] microcode: sig=0x206a7, pf=0x10, revision=0x1a [ 8.099379] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 8.099513] registered taskstats version 1 [ 8.100695] rtc_cmos 00:03: setting system clock to 2017-07-04 18:33:43 UTC (1499193223) [ 8.118319] Freeing unused kernel memory: 117100K (ffffffff8186b000 - ffffffff88ac6000) [ 8.119177] Write protecting the kernel read-only data: 8192k [ 8.120589] Freeing unused kernel memory: 1736K (ffff88000144e000 - ffff880001600000) [ 8.122836] Freeing unused kernel memory: 548K (ffff880001777000 - ffff880001800000) [ 8.221913] udevd[524]: starting version 3.1.5 [ 8.223029] random: udevd: uninitialized urandom read (16 bytes read) [ 8.223946] random: udevd: uninitialized urandom read (16 bytes read) [ 8.224847] random: udevd: uninitialized urandom read (16 bytes read) [ 8.231430] random: udevd: uninitialized urandom read (16 bytes read) [ 8.234972] random: udevd: uninitialized urandom read (16 bytes read) [ 8.235696] Monitor-Mwait will be used to enter C-1 state [ 8.235704] Monitor-Mwait will be used to enter C-2 state [ 8.237522] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6 [ 8.238614] ACPI: Sleep Button [SLPB] [ 8.239546] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input7 [ 8.240412] ACPI: Lid Switch [LID] [ 8.241493] random: udevd: uninitialized urandom read (16 bytes read) [ 8.241536] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8 [ 8.241591] ACPI: Power Button [PWRF] [ 8.245403] pps_core: LinuxPPS API ver. 1 registered [ 8.246631] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 8.247710] PTP clock support registered [ 8.249004] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 8.249833] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 8.250857] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 8.253982] [drm] Initialized [ 8.268604] ACPI: bus type USB registered [ 8.269493] usbcore: registered new interface driver usbfs [ 8.270780] bcma-pci-bridge 0000:24:00.0: enabling device (0000 -> 0002) [ 8.270883] bcma: bus0: Found chip with id 0x4313, rev 0x01 and package 0x08 [ 8.270915] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0) [ 8.270949] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0) [ 8.271001] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0) [ 8.278463] usbcore: registered new interface driver hub [ 8.280038] usbcore: registered new device driver usb [ 8.281846] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 8.282846] bcma: bus0: Bus registered [ 8.282922] ehci-pci: EHCI PCI platform driver [ 8.289635] libata version 3.00 loaded. [ 8.319683] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 8.321089] ACPI: Battery Slot [BAT0] (battery present) [ 8.322410] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 8.323356] ACPI: Battery Slot [BAT1] (battery absent) [ 8.324729] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 8.324735] thermal LNXTHERM:00: registered as thermal_zone0 [ 8.324736] ACPI: Thermal Zone [CPUZ] (47 C) [ 8.327688] ACPI: AC Adapter [AC] (on-line) [ 8.334624] input: PC Speaker as /devices/platform/pcspkr/input/input9 [ 8.346593] kvm: disabled by bios [ 8.349449] thermal LNXTHERM:01: registered as thermal_zone1 [ 8.350817] ACPI: Thermal Zone [GFXZ] (0 C) [ 8.361249] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 8.367490] thermal LNXTHERM:02: registered as thermal_zone2 [ 8.368582] ACPI: Thermal Zone [EXTZ] (41 C) [ 8.384418] thermal LNXTHERM:03: registered as thermal_zone3 [ 8.385512] ACPI: Thermal Zone [LOCZ] (38 C) [ 8.402319] thermal LNXTHERM:04: registered as thermal_zone4 [ 8.403256] ACPI: Thermal Zone [BATZ] (31 C) [ 8.404420] thermal LNXTHERM:05: registered as thermal_zone5 [ 8.405383] ACPI: Thermal Zone [PCHZ] (0 C) [ 8.442948] kvm: disabled by bios [ 8.485007] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 2c:27:d7:82:2d:2c [ 8.486131] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 8.487311] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF [ 8.488937] [drm] Memory usable by graphics device = 2048M [ 8.489910] checking generic (c0000000 300000) vs hw (c0000000 10000000) [ 8.489910] fb: switching to inteldrmfb from EFI VGA [ 8.490818] Console: switching to colour dummy device 80x25 [ 8.490925] [drm] Replacing VGA console driver [ 8.496244] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 8.496258] [drm] Driver supports precise vblank timestamp query. [ 8.498596] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 8.517387] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 8.520136] acpi device:0b: registered as cooling_device4 [ 8.520249] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input10 [ 8.520329] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0 [ 8.520362] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002) [ 8.520729] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 8.520740] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 8.520753] ehci-pci 0000:00:1a.0: debug port 2 [ 8.524661] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 8.524671] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd4729000 [ 8.526512] random: fast init done [ 8.529190] fbcon: inteldrmfb (fb0) is primary device [ 8.544097] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD81B1X5: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line [ 8.544099] snd_hda_codec_idt hdaudioC0D0: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0) [ 8.544101] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0) [ 8.544102] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0 [ 8.544103] snd_hda_codec_idt hdaudioC0D0: inputs: [ 8.544105] snd_hda_codec_idt hdaudioC0D0: Internal Mic=0xe [ 8.544107] snd_hda_codec_idt hdaudioC0D0: Mic=0xc [ 8.544108] snd_hda_codec_idt hdaudioC0D0: Line=0xf [ 8.552005] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 8.552067] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 8.552069] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.552070] usb usb1: Product: EHCI Host Controller [ 8.552070] usb usb1: Manufacturer: Linux 4.9.16-gentoo ehci_hcd [ 8.552071] usb usb1: SerialNumber: 0000:00:1a.0 [ 8.552222] hub 1-0:1.0: USB hub found [ 8.552231] hub 1-0:1.0: 3 ports detected [ 8.552498] Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1 [ 8.552500] b43: probe of bcma0:1 failed with error -524 [ 8.552531] Broadcom 43xx driver loaded [ Features: PNLS ] [ 8.552599] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 8.552608] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 8.552622] ehci-pci 0000:00:1d.0: debug port 2 [ 8.553624] brcmsmac bcma0:1: mfg 4bf core 812 rev 24 class 0 irq 19 [ 8.556523] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 8.556531] ehci-pci 0000:00:1d.0: irq 16, io mem 0xd4728000 [ 8.560811] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 8.582056] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 8.582204] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 8.582206] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.582207] usb usb2: Product: EHCI Host Controller [ 8.582209] usb usb2: Manufacturer: Linux 4.9.16-gentoo ehci_hcd [ 8.582210] usb usb2: SerialNumber: 0000:00:1d.0 [ 8.582581] hub 2-0:1.0: USB hub found [ 8.582595] hub 2-0:1.0: 3 ports detected [ 8.582918] ahci 0000:00:1f.2: version 3.0 [ 8.583167] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 8.593302] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x21 impl SATA mode [ 8.593309] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst [ 8.622797] scsi host0: ahci [ 8.622955] scsi host1: ahci [ 8.623048] scsi host2: ahci [ 8.623141] scsi host3: ahci [ 8.623269] scsi host4: ahci [ 8.623374] scsi host5: ahci [ 8.623432] ata1: SATA max UDMA/133 abar m2048@0xd4727000 port 0xd4727100 irq 31 [ 8.623432] ata2: DUMMY [ 8.623433] ata3: DUMMY [ 8.623433] ata4: DUMMY [ 8.623434] ata5: DUMMY [ 8.623444] ata6: SATA max UDMA/133 abar m2048@0xd4727000 port 0xd4727380 irq 31 [ 8.636823] snd_hda_codec_generic hdaudioC0D3: autoconfig for Generic: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line [ 8.636825] snd_hda_codec_generic hdaudioC0D3: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 8.636827] snd_hda_codec_generic hdaudioC0D3: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 8.636827] snd_hda_codec_generic hdaudioC0D3: mono: mono_out=0x0 [ 8.636829] snd_hda_codec_generic hdaudioC0D3: dig-out=0x5/0x0 [ 8.636829] snd_hda_codec_generic hdaudioC0D3: inputs: [ 8.638688] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 8.639037] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 8.639185] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 8.639347] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 8.639501] input: HDA Intel PCH HDMI as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 8.794112] psmouse serio4: synaptics: queried max coordinates: x [..5932], y [..5164] [ 8.869250] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000/0x0, board id: 0, fw id: 620079 [ 8.915182] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5 [ 8.922024] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 8.943305] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input16 [ 8.952043] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 8.954247] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 8.967034] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 8.968905] ata1.00: ATA-9: INTEL SSDSC2BF180A4H, LH6i, max UDMA/133 [ 8.968909] ata1.00: 351651888 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 8.972019] tsc: Refined TSC clocksource calibration: 2494.332 MHz [ 8.972034] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f44f92df3, max_idle_ns: 440795329494 ns [ 8.987086] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 8.995269] ata1.00: configured for UDMA/133 [ 9.112879] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 9.112884] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 9.113159] hub 1-1:1.0: USB hub found [ 9.113202] hub 1-1:1.0: 6 ports detected [ 9.142522] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 9.142524] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 9.142863] hub 2-1:1.0: USB hub found [ 9.142970] hub 2-1:1.0: 8 ports detected [ 9.281479] Console: switching to colour frame buffer device 160x50 [ 9.359703] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 9.392418] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2BF18 LH6i PQ: 0 ANSI: 5 [ 9.432035] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 9.462041] usb 2-1.3: new high-speed USB device number 3 using ehci-pci [ 9.492258] sd 0:0:0:0: [sda] 351651888 512-byte logical blocks: (180 GB/168 GiB) [ 9.493383] sd 0:0:0:0: [sda] Write Protect is off [ 9.494364] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 9.494394] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.497153] sda: sda1 sda2 sda3 sda4 [ 9.498757] sd 0:0:0:0: [sda] Attached SCSI disk [ 9.584374] usb 1-1.1: New USB device found, idVendor=138a, idProduct=003c [ 9.585370] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 9.586334] usb 1-1.1: SerialNumber: 00b070659f8d [ 9.614761] usb 2-1.3: New USB device found, idVendor=090c, idProduct=1000 [ 9.616048] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 9.617288] usb 2-1.3: Product: USB Flash Disk [ 9.618514] usb 2-1.3: Manufacturer: General [ 9.619714] usb 2-1.3: SerialNumber: 1313020000001572 [ 9.622286] usb-storage 2-1.3:1.0: USB Mass Storage device detected [ 9.623572] scsi host6: usb-storage 2-1.3:1.0 [ 9.624683] usbcore: registered new interface driver usb-storage [ 9.712024] usb 2-1.4: new high-speed USB device number 4 using ehci-pci [ 9.824360] ata6: SATA link down (SStatus 0 SControl 300) [ 9.911310] usb 2-1.4: New USB device found, idVendor=04f2, idProduct=b242 [ 9.912695] usb 2-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 9.912697] usb 2-1.4: Product: HP HD Webcam [Fixed] [ 9.912698] usb 2-1.4: Manufacturer: Chicony Electronics Co., Ltd. [ 9.912699] usb 2-1.4: SerialNumber: SN0001 [ 9.982337] clocksource: Switched to clocksource tsc [ 9.998264] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 10.011965] usb 2-1.6: new full-speed USB device number 5 using ehci-pci [ 10.074849] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input20 [ 10.148326] scsi: Detection failed (no card) [ 10.166605] usb 2-1.6: New USB device found, idVendor=03f0, idProduct=231d [ 10.168043] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 10.169406] usb 2-1.6: Product: HP Integrated Module [ 10.170759] usb 2-1.6: Manufacturer: Broadcom Corp [ 10.253515] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 10.445711] Fusion MPT base driver 3.04.20 [ 10.446907] Copyright (c) 1999-2008 LSI Corporation [ 10.451339] Fusion MPT SPI Host driver 3.04.20 [ 10.454611] Fusion MPT FC Host driver 3.04.20 [ 10.458062] Fusion MPT SAS Host driver 3.04.20 [ 10.460738] 3ware Storage Controller device driver for Linux v1.26.02.003. [ 10.463636] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. [ 10.470206] HP CISS Driver (v 3.6.26) [ 10.480236] Adaptec aacraid driver 1.2-1[41066]-ms [ 10.484903] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 10.486593] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 10.491002] megasas: 06.811.02.00-rc1 [ 10.495784] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.38-k. [ 10.506770] Emulex LightPulse Fibre Channel SCSI driver 11.2.0.0. [ 10.507957] Copyright(c) 2004-2016 Emulex. All rights reserved. [ 10.513189] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 10.537407] uhci_hcd: USB Universal Host Controller Interface driver [ 10.540688] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 10.542181] ohci-pci: OHCI PCI platform driver [ 10.559610] usbcore: registered new interface driver usbhid [ 10.560959] usbhid: USB HID core driver [ 10.654301] md: raid0 personality registered for level 0 [ 10.657613] md: raid1 personality registered for level 1 [ 10.821928] raid6: sse2x1 gen() 8156 MB/s [ 10.991922] raid6: sse2x1 xor() 5861 MB/s [ 10.994917] scsi 6:0:0:0: Direct-Access General USB Flash Disk 1100 PQ: 0 ANSI: 4 [ 11.161912] raid6: sse2x2 gen() 10248 MB/s [ 11.331909] raid6: sse2x2 xor() 7313 MB/s [ 11.501901] raid6: sse2x4 gen() 11822 MB/s [ 11.671898] raid6: sse2x4 xor() 8503 MB/s [ 11.673039] raid6: using algorithm sse2x4 gen() 11822 MB/s [ 11.674150] raid6: .... xor() 8503 MB/s, rmw enabled [ 11.675220] raid6: using ssse3x2 recovery algorithm [ 11.676509] async_tx: api initialized (async) [ 11.676546] sd 6:0:0:0: Attached scsi generic sg1 type 0 [ 11.677989] sd 6:0:0:0: [sdb] 7831552 512-byte logical blocks: (4.01 GB/3.73 GiB) [ 11.679110] sd 6:0:0:0: [sdb] Write Protect is off [ 11.679112] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 11.680230] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 11.682405] xor: automatically using best checksumming function avx [ 11.684603] md: raid6 personality registered for level 6 [ 11.685720] md: raid5 personality registered for level 5 [ 11.686789] md: raid4 personality registered for level 4 [ 11.697616] md: raid10 personality registered for level 10 [ 11.700326] md: linear personality registered for level -1 [ 11.703173] md: multipath personality registered for level -4 [ 11.703510] sdb: sdb1 sdb2 [ 11.709239] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 11.736485] RPC: Registered named UNIX socket transport module. [ 11.737730] RPC: Registered udp transport module. [ 11.738945] RPC: Registered tcp transport module. [ 11.740125] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 11.759007] fuse init (API version 7.26) [ 11.770130] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 11.771339] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 11.778233] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de [ 11.783002] sky2: driver version 1.30 [ 11.818943] tulip: Linux Tulip driver version 1.1.15-NAPI (Feb 27, 2007) [ 11.826219] dca service started, version 1.12.1 [ 11.828056] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 11.829086] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 11.831914] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI [ 11.832933] ixgb: Copyright (c) 1999-2008 Intel Corporation. [ 11.838294] Loading iSCSI transport class v2.0-870. [ 11.945395] device-mapper: multipath round-robin: version 1.2.0 loaded [ 23.756281] random: crng init done [ 39.083063] PM: Starting manual resume from disk [ 39.121046] EXT4-fs (dm-2): INFO: recovery required on readonly filesystem [ 39.122147] EXT4-fs (dm-2): write access will be enabled during recovery [ 39.157089] EXT4-fs (dm-2): recovery complete [ 39.180872] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 40.421320] udevd[2349]: starting version 3.1.5 [ 40.616632] e1000e 0000:00:19.0 enp0s25: renamed from eth0 [ 40.681533] brcmsmac bcma0:1 wlp36s0b1: renamed from wlan0 [ 40.855440] kvm: disabled by bios [ 40.878485] ip_tables: (C) 2000-2006 Netfilter Core Team [ 41.011157] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 41.053558] lib80211: common routines for IEEE802.11 drivers [ 41.053560] lib80211_crypt: registered algorithm 'NULL' [ 41.076432] lib80211_crypt: registered algorithm 'TKIP' [ 41.640946] EXT4-fs (dm-2): re-mounted. Opts: errors=remount-ro,discard [ 41.764782] Adding 524284k swap on /dev/mapper/vg1-swap. Priority:-1 extents:1 across:524284k SS [ 41.823068] EXT4-fs (dm-3): mounting with "discard" option, but the device does not support discard [ 41.823070] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: discard [ 43.421650] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement) [ 43.421663] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement) [ 43.421853] IPv6: ADDRCONF(NETDEV_UP): wlp36s0b1: link is not ready [ 43.801243] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 44.711920] wlp36s0b1: authenticate with 38:10:d5:69:5a:e6 [ 44.712829] wlp36s0b1: send auth to 38:10:d5:69:5a:e6 (try 1/3) [ 44.715780] wlp36s0b1: authenticated [ 44.721007] wlp36s0b1: associate with 38:10:d5:69:5a:e6 (try 1/3) [ 44.731837] wlp36s0b1: RX AssocResp from 38:10:d5:69:5a:e6 (capab=0x31 status=0 aid=2) [ 44.732393] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated [ 44.732396] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 44.732404] wlp36s0b1: associated [ 44.732442] IPv6: ADDRCONF(NETDEV_CHANGE): wlp36s0b1: link becomes ready [ 44.736259] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211: txop exceeded phylen 159/256 dur 1778/1504 [ 44.749380] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211: txop exceeded phylen 137/256 dur 1602/1504 [ 50.718927] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement) [ 530.444250] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211: txop exceeded phylen 153/256 dur 1730/1504