# dmesg [ 0.000000] Linux version 4.9.16-gentoo (root@evgenijTrapecija) (gcc version 5.4.0 (Gentoo 5.4.0-r3 p1.3, pie-0.6.5) ) #1 SMP Thu May 18 13:15:35 EEST 2017 [ 0.000000] Command line: BOOT_IMAGE=/kernel-genkernel-x86_64-4.9.16-gentoo root=/dev/cciss/c0d0p4 ro acpi=off [ 0.000000] x86/fpu: Legacy x87 FPU detected. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfe55fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bfe56000-0x00000000bfe5dfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bfe5e000-0x00000000bfe5efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bfe5f000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fecfffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fffefff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: HP ProLiant DL380 G5, BIOS P56 01/24/2008 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x23ffff max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask 0FC0000000 write-back [ 0.000000] 1 base 0000000000 mask 0F80000000 write-back [ 0.000000] 2 base 0100000000 mask 0F00000000 write-back [ 0.000000] 3 base 0200000000 mask 0E00000000 write-back [ 0.000000] 4 base 0400000000 mask 0C00000000 write-back [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it. [ 0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it. [ 0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it. [ 0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it. [ 0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it. [ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xbfe5f max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f4f80-0x000f4f8f] mapped at [ffff8800000f4f80] [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] BRK [0x02022000, 0x02022fff] PGTABLE [ 0.000000] BRK [0x02023000, 0x02023fff] PGTABLE [ 0.000000] BRK [0x02024000, 0x02024fff] PGTABLE [ 0.000000] BRK [0x02025000, 0x02025fff] PGTABLE [ 0.000000] BRK [0x02026000, 0x02026fff] PGTABLE [ 0.000000] BRK [0x02027000, 0x02027fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x33f21000-0x35f87fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000023fffefff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bfe55fff] [ 0.000000] node 0: [mem 0x00000000bfe5e000-0x00000000bfe5efff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000023fffefff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023fffefff] [ 0.000000] On node 0 totalpages: 2096628 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12218 pages used for memmap [ 0.000000] DMA32 zone: 781911 pages, LIFO batch:31 [ 0.000000] Normal zone: 20480 pages used for memmap [ 0.000000] Normal zone: 1310719 pages, LIFO batch:31 [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] MPTABLE: OEM ID: HP [ 0.000000] MPTABLE: Product ID: PROLIANT [ 0.000000] MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] Processor #1 [ 0.000000] Processor #6 [ 0.000000] Processor #7 [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] Processors: 4 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfe56000-0xbfe5dfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfe5f000-0xbfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee10000-0xffbfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff] [ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 34 pages/cpu @ffff88023fa00000 s101528 r8192 d29544 u524288 [ 0.000000] pcpu-alloc: s101528 r8192 d29544 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2063845 [ 0.000000] Kernel command line: BOOT_IMAGE=/kernel-genkernel-x86_64-4.9.16-gentoo root=/dev/cciss/c0d0p4 ro acpi=off [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 8126764K/8386512K available (6277K kernel code, 1217K rwdata, 2908K rodata, 1380K init, 1592K bss, 259748K reserved, 0K cma-reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:524544 nr_irqs:456 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1600.032 MHz processor [ 0.002015] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.06 BogoMIPS (lpj=1600032) [ 0.002254] pid_max: default: 32768 minimum: 301 [ 0.002481] Security Framework initialized [ 0.002601] SELinux: Initializing. [ 0.003034] SELinux: Starting in permissive mode [ 0.003065] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.003187] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.004089] CPU: Physical Processor ID: 0 [ 0.004208] CPU: Processor Core ID: 0 [ 0.004325] mce: CPU supports 6 MCE banks [ 0.004450] CPU0: Thermal monitoring enabled (TM2) [ 0.004572] process: using mwait in idle threads [ 0.004694] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.004813] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.005446] Freeing SMP alternatives memory: 28K (ffffffff81e8b000 - ffffffff81e92000) [ 0.005644] ftrace: allocating 25391 entries in 100 pages [ 0.015194] smpboot: Max logical packages: 2 [ 0.015388] ExtINT not setup in hardware but reported by MP table [ 0.016353] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.128016] smpboot: CPU0: Intel(R) Xeon(R) CPU 5110 @ 1.60GHz (family: 0x6, model: 0xf, stepping: 0xb) [ 0.128332] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Broken BIOS detected, complain to your hardware vendor. [ 0.128692] [Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 186 is 43003c) [ 0.128888] Intel PMU driver. [ 0.129000] core: PEBS disabled due to CPU errata [ 0.129004] ... version: 2 [ 0.129121] ... bit width: 40 [ 0.129238] ... generic registers: 2 [ 0.129354] ... value mask: 000000ffffffffff [ 0.129473] ... max period: 000000007fffffff [ 0.129591] ... fixed-purpose events: 3 [ 0.129707] ... event mask: 0000000700000003 [ 0.131190] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.131653] x86: Booting SMP configuration: [ 0.131772] .... node #0, CPUs: #1 #2 [ 0.003000] smpboot: CPU 2 Converting physical 3 to logical package 1 [ 0.255219] #3 [ 0.317133] x86: Booted up 1 node, 4 CPUs [ 0.317133] smpboot: Total of 4 processors activated (12798.76 BogoMIPS) [ 0.319159] devtmpfs: initialized [ 0.319252] x86/mm: Memory block size: 128MB [ 0.325144] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.325348] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.326040] NET: Registered protocol family 16 [ 0.329007] cpuidle: using governor menu [ 0.329264] PCI: Using configuration type 1 for base access [ 0.329388] PCI: HP ProLiant DL380 detected, enabling pci=bfsort. [ 0.335068] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.335177] ACPI: Interpreter disabled. [ 0.335211] vgaarb: loaded [ 0.336117] SCSI subsystem initialized [ 0.336253] libata version 3.00 loaded. [ 0.336253] usbcore: registered new interface driver usbfs [ 0.336253] usbcore: registered new interface driver hub [ 0.336357] usbcore: registered new device driver usb [ 0.336525] PCI: Probing PCI hardware [ 0.337005] PCI: root bus 00: using default resources [ 0.337007] PCI: Probing PCI hardware (bus 00) [ 0.337057] PCI host bridge to bus 0000:00 [ 0.337180] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.337302] pci_bus 0000:00: root bus resource [mem 0x00000000-0x3fffffffff] [ 0.337424] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 0.337636] pci 0000:00:00.0: [8086:25d8] type 00 class 0x060000 [ 0.337698] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 0.337788] pci 0000:00:02.0: [8086:25e2] type 01 class 0x060400 [ 0.337840] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.337921] pci 0000:00:03.0: [8086:25e3] type 01 class 0x060400 [ 0.338031] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.338111] pci 0000:00:04.0: [8086:25f8] type 01 class 0x060400 [ 0.338162] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.338242] pci 0000:00:05.0: [8086:25e5] type 01 class 0x060400 [ 0.338293] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.338374] pci 0000:00:06.0: [8086:25f9] type 01 class 0x060400 [ 0.338425] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.338505] pci 0000:00:07.0: [8086:25e7] type 01 class 0x060400 [ 0.338556] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.338640] pci 0000:00:10.0: [8086:25f0] type 00 class 0x060000 [ 0.338728] pci 0000:00:10.1: [8086:25f0] type 00 class 0x060000 [ 0.338814] pci 0000:00:10.2: [8086:25f0] type 00 class 0x060000 [ 0.338906] pci 0000:00:11.0: [8086:25f1] type 00 class 0x060000 [ 0.338995] pci 0000:00:13.0: [8086:25f3] type 00 class 0x060000 [ 0.339089] pci 0000:00:15.0: [8086:25f5] type 00 class 0x060000 [ 0.339175] pci 0000:00:16.0: [8086:25f6] type 00 class 0x060000 [ 0.339278] pci 0000:00:1c.0: [8086:2690] type 01 class 0x060400 [ 0.339354] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.339438] pci 0000:00:1c.1: [8086:2692] type 01 class 0x060400 [ 0.339514] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.339604] pci 0000:00:1d.0: [8086:2688] type 00 class 0x0c0300 [ 0.339660] pci 0000:00:1d.0: reg 0x20: [io 0x1000-0x101f] [ 0.339754] pci 0000:00:1d.1: [8086:2689] type 00 class 0x0c0300 [ 0.339810] pci 0000:00:1d.1: reg 0x20: [io 0x1020-0x103f] [ 0.339902] pci 0000:00:1d.2: [8086:268a] type 00 class 0x0c0300 [ 0.339957] pci 0000:00:1d.2: reg 0x20: [io 0x1040-0x105f] [ 0.340057] pci 0000:00:1d.3: [8086:268b] type 00 class 0x0c0300 [ 0.340114] pci 0000:00:1d.3: reg 0x20: [io 0x1060-0x107f] [ 0.340216] pci 0000:00:1d.7: [8086:268c] type 00 class 0x0c0320 [ 0.340236] pci 0000:00:1d.7: reg 0x10: [mem 0xf3df0000-0xf3df03ff] [ 0.340329] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.340411] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.340529] pci 0000:00:1f.0: [8086:2670] type 00 class 0x060100 [ 0.340621] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 0.340699] pci 0000:00:1f.1: [8086:269e] type 00 class 0x01018a [ 0.340714] pci 0000:00:1f.1: reg 0x10: [io 0x01f0-0x01f7] [ 0.340725] pci 0000:00:1f.1: reg 0x14: [io 0x03f4-0x03f7] [ 0.340736] pci 0000:00:1f.1: reg 0x18: [io 0x0170-0x0177] [ 0.340746] pci 0000:00:1f.1: reg 0x1c: [io 0x0374-0x0377] [ 0.340757] pci 0000:00:1f.1: reg 0x20: [io 0x0500-0x050f] [ 0.340780] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.340903] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.341004] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.341125] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.341372] pci 0000:09:00.0: [8086:3500] type 01 class 0x060400 [ 0.341441] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold [ 0.341528] pci 0000:09:00.3: [8086:350c] type 01 class 0x060400 [ 0.341598] pci 0000:09:00.3: PME# supported from D0 D3hot D3cold [ 0.341677] pci 0000:09:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.341884] pci 0000:00:02.0: PCI bridge to [bus 09-12] [ 0.342005] pci 0000:00:02.0: bridge window [io 0x5000-0x6fff] [ 0.342009] pci 0000:00:02.0: bridge window [mem 0xf9d00000-0xf9ffffff] [ 0.342078] pci 0000:0a:00.0: [8086:3510] type 01 class 0x060400 [ 0.342154] pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold [ 0.342230] pci 0000:0a:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.342441] pci 0000:0a:01.0: [8086:3514] type 01 class 0x060400 [ 0.342517] pci 0000:0a:01.0: PME# supported from D0 D3hot D3cold [ 0.342592] pci 0000:0a:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.342806] pci 0000:0a:02.0: [8086:3518] type 01 class 0x060400 [ 0.342882] pci 0000:0a:02.0: PME# supported from D0 D3hot D3cold [ 0.342958] pci 0000:0a:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.343036] pci 0000:09:00.0: PCI bridge to [bus 0a-11] [ 0.343157] pci 0000:09:00.0: bridge window [io 0x5000-0x6fff] [ 0.343162] pci 0000:09:00.0: bridge window [mem 0xf9e00000-0xf9ffffff] [ 0.343249] pci 0000:0b:00.0: [8086:10b9] type 00 class 0x020000 [ 0.343274] pci 0000:0b:00.0: reg 0x10: [mem 0xf9ee0000-0xf9efffff] [ 0.343292] pci 0000:0b:00.0: reg 0x14: [mem 0xf9ec0000-0xf9edffff] [ 0.343311] pci 0000:0b:00.0: reg 0x18: [io 0x5000-0x501f] [ 0.343378] pci 0000:0b:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.343460] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.343545] pci 0000:0b:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.343755] pci 0000:0a:00.0: PCI bridge to [bus 0b-0d] [ 0.344006] pci 0000:0a:00.0: bridge window [io 0x5000-0x5fff] [ 0.344010] pci 0000:0a:00.0: bridge window [mem 0xf9e00000-0xf9efffff] [ 0.344086] pci 0000:0e:00.0: [1166:0103] type 01 class 0x060400 [ 0.344167] pci 0000:0e:00.0: PME# supported from D0 D3hot D3cold [ 0.344243] pci 0000:0e:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.344450] pci 0000:0a:01.0: PCI bridge to [bus 0e-10] [ 0.344571] pci 0000:0a:01.0: bridge window [io 0x6000-0x6fff] [ 0.344575] pci 0000:0a:01.0: bridge window [mem 0xf9f00000-0xf9ffffff] [ 0.344653] pci 0000:0f:04.0: [1166:0104] type 01 class 0x060400 [ 0.344796] pci 0000:0f:08.0: [103c:3238] type 00 class 0x010400 [ 0.344826] pci 0000:0f:08.0: reg 0x10: [mem 0xf9f80000-0xf9ffffff 64bit] [ 0.344838] pci 0000:0f:08.0: reg 0x18: [io 0x6000-0x60ff] [ 0.344850] pci 0000:0f:08.0: reg 0x1c: [mem 0xf9f70000-0xf9f77fff] [ 0.344881] pci 0000:0f:08.0: reg 0x30: [mem 0x00000000-0x00003fff pref] [ 0.344929] pci 0000:0f:08.0: supports D1 [ 0.345093] pci 0000:0e:00.0: PCI bridge to [bus 0f-10] [ 0.345218] pci 0000:0e:00.0: bridge window [io 0x6000-0x6fff] [ 0.345223] pci 0000:0e:00.0: bridge window [mem 0xf9f00000-0xf9ffffff] [ 0.345336] pci 0000:0f:04.0: PCI bridge to [bus 10] [ 0.345544] pci 0000:0a:02.0: PCI bridge to [bus 11] [ 0.345779] pci 0000:09:00.3: PCI bridge to [bus 12] [ 0.345985] pci 0000:06:00.0: [8086:10b9] type 00 class 0x020000 [ 0.346012] pci 0000:06:00.0: reg 0x10: [mem 0xf9ce0000-0xf9cfffff] [ 0.346030] pci 0000:06:00.0: reg 0x14: [mem 0xf9cc0000-0xf9cdffff] [ 0.346047] pci 0000:06:00.0: reg 0x18: [io 0x4000-0x401f] [ 0.346108] pci 0000:06:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.346183] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 0.346265] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.346474] pci 0000:00:03.0: PCI bridge to [bus 06-08] [ 0.346595] pci 0000:00:03.0: bridge window [io 0x4000-0x4fff] [ 0.346599] pci 0000:00:03.0: bridge window [mem 0xf9c00000-0xf9cfffff] [ 0.346653] pci 0000:00:04.0: PCI bridge to [bus 13-15] [ 0.346827] pci 0000:00:05.0: PCI bridge to [bus 16] [ 0.347018] pci 0000:17:00.0: [10de:0402] type 00 class 0x030000 [ 0.347031] pci 0000:17:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff] [ 0.347044] pci 0000:17:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.347058] pci 0000:17:00.0: reg 0x1c: [mem 0xfa000000-0xfbffffff 64bit] [ 0.347067] pci 0000:17:00.0: reg 0x24: [io 0x7000-0x707f] [ 0.347077] pci 0000:17:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.347167] vgaarb: setting as boot device: PCI:0000:17:00.0 [ 0.347288] vgaarb: device added: PCI:0000:17:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.350015] pci 0000:00:06.0: PCI bridge to [bus 17-19] [ 0.350137] pci 0000:00:06.0: bridge window [io 0x7000-0x7fff] [ 0.350141] pci 0000:00:06.0: bridge window [mem 0xfa000000-0xfdffffff] [ 0.350147] pci 0000:00:06.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.350199] pci 0000:00:07.0: PCI bridge to [bus 1a] [ 0.350397] pci 0000:02:00.0: [1166:0103] type 01 class 0x060400 [ 0.350493] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.350572] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.351013] pci 0000:00:1c.0: PCI bridge to [bus 02-03] [ 0.351136] pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf5ffffff] [ 0.351220] pci 0000:03:00.0: [14e4:164c] type 00 class 0x020000 [ 0.351252] pci 0000:03:00.0: reg 0x10: [mem 0xf4000000-0xf5ffffff 64bit] [ 0.351313] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x000007ff pref] [ 0.351379] pci 0000:03:00.0: PME# supported from D3hot D3cold [ 0.352068] pci 0000:02:00.0: PCI bridge to [bus 03] [ 0.352198] pci 0000:02:00.0: bridge window [mem 0xf4000000-0xf5ffffff] [ 0.352288] pci 0000:04:00.0: [1166:0103] type 01 class 0x060400 [ 0.352384] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.352462] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.352669] pci 0000:00:1c.1: PCI bridge to [bus 04-05] [ 0.352793] pci 0000:00:1c.1: bridge window [mem 0xf6000000-0xf7ffffff] [ 0.352875] pci 0000:05:00.0: [14e4:164c] type 00 class 0x020000 [ 0.352907] pci 0000:05:00.0: reg 0x10: [mem 0xf6000000-0xf7ffffff 64bit] [ 0.352968] pci 0000:05:00.0: reg 0x30: [mem 0x00000000-0x000007ff pref] [ 0.353036] pci 0000:05:00.0: PME# supported from D3hot D3cold [ 0.353170] pci 0000:04:00.0: PCI bridge to [bus 05] [ 0.353299] pci 0000:04:00.0: bridge window [mem 0xf6000000-0xf7ffffff] [ 0.353379] pci 0000:01:04.0: [0e11:b203] type 00 class 0x088000 [ 0.353399] pci 0000:01:04.0: reg 0x10: [io 0x2800-0x28ff] [ 0.353412] pci 0000:01:04.0: reg 0x14: [mem 0xf3fe0000-0xf3fe01ff] [ 0.353497] pci 0000:01:04.0: PME# supported from D0 D3hot D3cold [ 0.353584] pci 0000:01:04.2: [0e11:b204] type 00 class 0x088000 [ 0.353606] pci 0000:01:04.2: reg 0x10: [io 0x3400-0x34ff] [ 0.353619] pci 0000:01:04.2: reg 0x14: [mem 0xf3fd0000-0xf3fd07ff] [ 0.353633] pci 0000:01:04.2: reg 0x18: [mem 0xf3fc0000-0xf3fc3fff] [ 0.353646] pci 0000:01:04.2: reg 0x1c: [mem 0xf3f00000-0xf3f7ffff] [ 0.353682] pci 0000:01:04.2: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.353720] pci 0000:01:04.2: PME# supported from D0 D3hot D3cold [ 0.353807] pci 0000:01:04.4: [103c:3300] type 00 class 0x0c0300 [ 0.353874] pci 0000:01:04.4: reg 0x20: [io 0x3800-0x381f] [ 0.353934] pci 0000:01:04.4: PME# supported from D0 D3hot D3cold [ 0.354027] pci 0000:01:04.6: [103c:3302] type 00 class 0x0c0701 [ 0.354047] pci 0000:01:04.6: reg 0x10: [mem 0xf3ef0000-0xf3ef00ff] [ 0.354142] pci 0000:01:04.6: PME# supported from D0 D3hot D3cold [ 0.354257] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode) [ 0.354381] pci 0000:00:1e.0: bridge window [io 0x2000-0x3fff] [ 0.354385] pci 0000:00:1e.0: bridge window [mem 0xf3e00000-0xf3ffffff] [ 0.354392] pci 0000:00:1e.0: bridge window [mem 0xc8000000-0xcfffffff 64bit pref] [ 0.354395] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.354397] pci 0000:00:1e.0: bridge window [mem 0x00000000-0x3fffffffff] (subtractive decode) [ 0.354443] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 1a [ 0.354525] PCI: pci_cache_line_size set to 64 bytes [ 0.354650] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff] [ 0.354652] e820: reserve RAM buffer [mem 0xbfe56000-0xbfffffff] [ 0.354654] e820: reserve RAM buffer [mem 0xbfe5f000-0xbfffffff] [ 0.354656] e820: reserve RAM buffer [mem 0x23ffff000-0x23fffffff] [ 0.354860] NetLabel: Initializing [ 0.354977] NetLabel: domain hash size = 128 [ 0.355003] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.355150] NetLabel: unlabeled traffic allowed by default [ 0.355289] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.355392] hpet clockevent registered [ 0.355398] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.356043] clocksource: Switched to clocksource hpet [ 0.370768] VFS: Disk quotas dquot_6.6.0 [ 0.370939] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.375069] pnp: PnP ACPI: disabled [ 0.375389] pci 0000:0b:00.0: BAR 6: assigned [mem 0xf9e00000-0xf9e1ffff pref] [ 0.375586] pci 0000:0a:00.0: PCI bridge to [bus 0b-0d] [ 0.375707] pci 0000:0a:00.0: bridge window [io 0x5000-0x5fff] [ 0.375831] pci 0000:0a:00.0: bridge window [mem 0xf9e00000-0xf9efffff] [ 0.375960] pci 0000:0f:08.0: BAR 6: assigned [mem 0xf9f00000-0xf9f03fff pref] [ 0.376165] pci 0000:0f:04.0: PCI bridge to [bus 10] [ 0.376297] pci 0000:0e:00.0: PCI bridge to [bus 0f-10] [ 0.376418] pci 0000:0e:00.0: bridge window [io 0x6000-0x6fff] [ 0.376541] pci 0000:0e:00.0: bridge window [mem 0xf9f00000-0xf9ffffff] [ 0.376671] pci 0000:0a:01.0: PCI bridge to [bus 0e-10] [ 0.376791] pci 0000:0a:01.0: bridge window [io 0x6000-0x6fff] [ 0.376914] pci 0000:0a:01.0: bridge window [mem 0xf9f00000-0xf9ffffff] [ 0.377049] pci 0000:0a:02.0: PCI bridge to [bus 11] [ 0.377178] pci 0000:09:00.0: PCI bridge to [bus 0a-11] [ 0.377298] pci 0000:09:00.0: bridge window [io 0x5000-0x6fff] [ 0.377422] pci 0000:09:00.0: bridge window [mem 0xf9e00000-0xf9ffffff] [ 0.377549] pci 0000:09:00.3: PCI bridge to [bus 12] [ 0.377678] pci 0000:00:02.0: PCI bridge to [bus 09-12] [ 0.377798] pci 0000:00:02.0: bridge window [io 0x5000-0x6fff] [ 0.377921] pci 0000:00:02.0: bridge window [mem 0xf9d00000-0xf9ffffff] [ 0.378056] pci 0000:06:00.0: BAR 6: assigned [mem 0xf9c00000-0xf9c1ffff pref] [ 0.378251] pci 0000:00:03.0: PCI bridge to [bus 06-08] [ 0.378372] pci 0000:00:03.0: bridge window [io 0x4000-0x4fff] [ 0.378494] pci 0000:00:03.0: bridge window [mem 0xf9c00000-0xf9cfffff] [ 0.378620] pci 0000:00:04.0: PCI bridge to [bus 13-15] [ 0.378748] pci 0000:00:05.0: PCI bridge to [bus 16] [ 0.378876] pci 0000:17:00.0: BAR 6: assigned [mem 0xfc000000-0xfc01ffff pref] [ 0.379079] pci 0000:00:06.0: PCI bridge to [bus 17-19] [ 0.379199] pci 0000:00:06.0: bridge window [io 0x7000-0x7fff] [ 0.379322] pci 0000:00:06.0: bridge window [mem 0xfa000000-0xfdffffff] [ 0.379445] pci 0000:00:06.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.379644] pci 0000:00:07.0: PCI bridge to [bus 1a] [ 0.379777] pci 0000:03:00.0: BAR 6: no space for [mem size 0x00000800 pref] [ 0.379899] pci 0000:03:00.0: BAR 6: failed to assign [mem size 0x00000800 pref] [ 0.380101] pci 0000:02:00.0: PCI bridge to [bus 03] [ 0.380225] pci 0000:02:00.0: bridge window [mem 0xf4000000-0xf5ffffff] [ 0.380356] pci 0000:00:1c.0: PCI bridge to [bus 02-03] [ 0.380479] pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf5ffffff] [ 0.380608] pci 0000:05:00.0: BAR 6: no space for [mem size 0x00000800 pref] [ 0.380729] pci 0000:05:00.0: BAR 6: failed to assign [mem size 0x00000800 pref] [ 0.380925] pci 0000:04:00.0: PCI bridge to [bus 05] [ 0.381055] pci 0000:04:00.0: bridge window [mem 0xf6000000-0xf7ffffff] [ 0.381186] pci 0000:00:1c.1: PCI bridge to [bus 04-05] [ 0.381310] pci 0000:00:1c.1: bridge window [mem 0xf6000000-0xf7ffffff] [ 0.381442] pci 0000:01:04.2: BAR 6: assigned [mem 0xf3e00000-0xf3e0ffff pref] [ 0.381638] pci 0000:00:1e.0: PCI bridge to [bus 01] [ 0.381759] pci 0000:00:1e.0: bridge window [io 0x2000-0x3fff] [ 0.381882] pci 0000:00:1e.0: bridge window [mem 0xf3e00000-0xf3ffffff] [ 0.382012] pci 0000:00:1e.0: bridge window [mem 0xc8000000-0xcfffffff 64bit pref] [ 0.382214] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.382216] pci_bus 0000:00: resource 5 [mem 0x00000000-0x3fffffffff] [ 0.382219] pci_bus 0000:09: resource 0 [io 0x5000-0x6fff] [ 0.382221] pci_bus 0000:09: resource 1 [mem 0xf9d00000-0xf9ffffff] [ 0.382224] pci_bus 0000:0a: resource 0 [io 0x5000-0x6fff] [ 0.382226] pci_bus 0000:0a: resource 1 [mem 0xf9e00000-0xf9ffffff] [ 0.382229] pci_bus 0000:0b: resource 0 [io 0x5000-0x5fff] [ 0.382231] pci_bus 0000:0b: resource 1 [mem 0xf9e00000-0xf9efffff] [ 0.382233] pci_bus 0000:0e: resource 0 [io 0x6000-0x6fff] [ 0.382236] pci_bus 0000:0e: resource 1 [mem 0xf9f00000-0xf9ffffff] [ 0.382238] pci_bus 0000:0f: resource 0 [io 0x6000-0x6fff] [ 0.382240] pci_bus 0000:0f: resource 1 [mem 0xf9f00000-0xf9ffffff] [ 0.382243] pci_bus 0000:06: resource 0 [io 0x4000-0x4fff] [ 0.382245] pci_bus 0000:06: resource 1 [mem 0xf9c00000-0xf9cfffff] [ 0.382248] pci_bus 0000:17: resource 0 [io 0x7000-0x7fff] [ 0.382250] pci_bus 0000:17: resource 1 [mem 0xfa000000-0xfdffffff] [ 0.382252] pci_bus 0000:17: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.382255] pci_bus 0000:02: resource 1 [mem 0xf4000000-0xf5ffffff] [ 0.382257] pci_bus 0000:03: resource 1 [mem 0xf4000000-0xf5ffffff] [ 0.382260] pci_bus 0000:04: resource 1 [mem 0xf6000000-0xf7ffffff] [ 0.382262] pci_bus 0000:05: resource 1 [mem 0xf6000000-0xf7ffffff] [ 0.382265] pci_bus 0000:01: resource 0 [io 0x2000-0x3fff] [ 0.382267] pci_bus 0000:01: resource 1 [mem 0xf3e00000-0xf3ffffff] [ 0.382269] pci_bus 0000:01: resource 2 [mem 0xc8000000-0xcfffffff 64bit pref] [ 0.382271] pci_bus 0000:01: resource 4 [io 0x0000-0xffff] [ 0.382274] pci_bus 0000:01: resource 5 [mem 0x00000000-0x3fffffffff] [ 0.382345] NET: Registered protocol family 2 [ 0.382784] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.383269] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.383905] TCP: Hash tables configured (established 65536 bind 65536) [ 0.384111] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.384302] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.384583] NET: Registered protocol family 1 [ 0.384787] pci 0000:00:1d.0: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 0.384940] pci 0000:00:1d.1: PCI->APIC IRQ transform: INT B -> IRQ 17 [ 0.385100] pci 0000:00:1d.2: PCI->APIC IRQ transform: INT C -> IRQ 18 [ 0.385249] pci 0000:00:1d.3: PCI->APIC IRQ transform: INT D -> IRQ 19 [ 0.385398] pci 0000:00:1d.7: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 0.398079] pci 0000:01:04.4: PCI->APIC IRQ transform: INT B -> IRQ 22 [ 0.399212] pci 0000:17:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.399407] PCI: CLS 64 bytes, default 64 [ 0.399507] Trying to unpack rootfs image as initramfs... [ 7.584519] Freeing initrd memory: 33180K (ffff880033f21000 - ffff880035f88000) [ 7.584725] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 7.584845] software IO TLB [mem 0xbbe56000-0xbfe56000] (64MB) mapped at [ffff8800bbe56000-ffff8800bfe55fff] [ 7.585223] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 7.585968] audit: initializing netlink subsys (disabled) [ 7.586150] audit: type=2000 audit(1495130329.585:1): initialized [ 7.586708] Initialise system trusted keyrings [ 7.587036] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 7.587459] SELinux: Registering netfilter hooks [ 7.588577] Key type asymmetric registered [ 7.588695] Asymmetric key parser 'x509' registered [ 7.588835] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 7.589107] io scheduler noop registered [ 7.589223] io scheduler deadline registered [ 7.589346] io scheduler cfq registered (default) [ 7.590264] pcieport 0000:00:1c.0: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 7.590496] pcieport 0000:00:1c.1: PCI->APIC IRQ transform: INT B -> IRQ 17 [ 7.590791] pcieport 0000:0a:00.0: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 7.590952] pcieport 0000:0a:01.0: PCI->APIC IRQ transform: INT A -> IRQ 17 [ 7.591123] pcieport 0000:0a:02.0: PCI->APIC IRQ transform: INT A -> IRQ 18 [ 7.591358] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 7.591478] pcieport 0000:09:00.0: Signaling PME through PCIe PME interrupt [ 7.591597] pcieport 0000:0a:00.0: Signaling PME through PCIe PME interrupt [ 7.591715] pci 0000:0b:00.0: Signaling PME through PCIe PME interrupt [ 7.591834] pcieport 0000:0a:01.0: Signaling PME through PCIe PME interrupt [ 7.591952] pci 0000:0e:00.0: Signaling PME through PCIe PME interrupt [ 7.592078] pci 0000:0f:04.0: Signaling PME through PCIe PME interrupt [ 7.592197] pci 0000:0f:08.0: Signaling PME through PCIe PME interrupt [ 7.592315] pcieport 0000:0a:02.0: Signaling PME through PCIe PME interrupt [ 7.592434] pci 0000:09:00.3: Signaling PME through PCIe PME interrupt [ 7.592554] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded [ 7.592580] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt [ 7.592700] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt [ 7.592821] pcie_pme 0000:00:03.0:pcie001: service driver pcie_pme loaded [ 7.592844] pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt [ 7.592965] pcie_pme 0000:00:04.0:pcie001: service driver pcie_pme loaded [ 7.592995] pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt [ 7.593124] pcie_pme 0000:00:05.0:pcie001: service driver pcie_pme loaded [ 7.593155] pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt [ 7.593275] pci 0000:17:00.0: Signaling PME through PCIe PME interrupt [ 7.593395] pcie_pme 0000:00:06.0:pcie001: service driver pcie_pme loaded [ 7.593418] pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt [ 7.593540] pcie_pme 0000:00:07.0:pcie001: service driver pcie_pme loaded [ 7.593571] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 7.593691] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 7.593809] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 7.593930] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded [ 7.593962] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt [ 7.594090] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt [ 7.594208] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt [ 7.594329] pcie_pme 0000:00:1c.1:pcie001: service driver pcie_pme loaded [ 7.594427] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 7.595344] intel_rng: FWH not detected [ 7.595511] intel_idle: does not run on family 6 model 15 [ 7.595522] ipmi message handler version 39.2 [ 7.595653] IPMI System Interface driver. [ 7.595784] ipmi_si 0000:01:04.6: probing via PCI [ 7.595910] ipmi_si 0000:01:04.6: PCI->APIC IRQ transform: INT A -> IRQ 21 [ 7.596051] ipmi_si 0000:01:04.6: [mem 0xf3ef0000-0xf3ef00ff] regsize 1 spacing 1 irq 21 [ 7.596245] ipmi_si: Adding PCI-specified kcs state machine [ 7.596423] ipmi_si: probing via SMBIOS [ 7.596539] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 7.596656] ipmi_si: Adding SMBIOS-specified kcs state machine [ 7.596810] ipmi_si: Trying PCI-specified kcs state machine at mem address 0xf3ef0000, slave address 0x0, irq 21 [ 7.919027] ipmi_si 0000:01:04.6: Using irq 21 [ 7.936155] random: fast init done [ 7.941459] ipmi_si 0000:01:04.6: Found new BMC (man_id: 0x00000b, prod_id: 0x2000, dev_id: 0x11) [ 7.941673] ipmi_si 0000:01:04.6: IPMI kcs interface initialized [ 7.946894] brd: module loaded [ 7.949550] loop: module loaded [ 7.949780] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 7.949902] ehci-pci: EHCI PCI platform driver [ 7.950066] ehci-pci 0000:00:1d.7: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 7.950241] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 7.950421] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 7.950629] ehci-pci 0000:00:1d.7: debug port 1 [ 7.954673] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 7.954686] ehci-pci 0000:00:1d.7: irq 16, io mem 0xf3df0000 [ 7.961022] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 7.961212] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 7.961332] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.961525] usb usb1: Product: EHCI Host Controller [ 7.961642] usb usb1: Manufacturer: Linux 4.9.16-gentoo ehci_hcd [ 7.961760] usb usb1: SerialNumber: 0000:00:1d.7 [ 7.962087] hub 1-0:1.0: USB hub found [ 7.962214] hub 1-0:1.0: 8 ports detected [ 7.962629] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 7.962750] ohci-pci: OHCI PCI platform driver [ 7.962887] uhci_hcd: USB Universal Host Controller Interface driver [ 7.964818] uhci_hcd 0000:00:1d.0: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 7.964949] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 7.965137] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 7.965337] uhci_hcd 0000:00:1d.0: detected 2 ports [ 7.965473] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001000 [ 7.965658] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 7.965778] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.965971] usb usb2: Product: UHCI Host Controller [ 7.966098] usb usb2: Manufacturer: Linux 4.9.16-gentoo uhci_hcd [ 7.966217] usb usb2: SerialNumber: 0000:00:1d.0 [ 7.966505] hub 2-0:1.0: USB hub found [ 7.966630] hub 2-0:1.0: 2 ports detected [ 7.966895] uhci_hcd 0000:00:1d.1: PCI->APIC IRQ transform: INT B -> IRQ 17 [ 7.967033] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 7.967216] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 7.967415] uhci_hcd 0000:00:1d.1: detected 2 ports [ 7.967554] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001020 [ 7.967737] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 7.967857] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.968058] usb usb3: Product: UHCI Host Controller [ 7.968175] usb usb3: Manufacturer: Linux 4.9.16-gentoo uhci_hcd [ 7.968294] usb usb3: SerialNumber: 0000:00:1d.1 [ 7.968579] hub 3-0:1.0: USB hub found [ 7.968703] hub 3-0:1.0: 2 ports detected [ 7.968968] uhci_hcd 0000:00:1d.2: PCI->APIC IRQ transform: INT C -> IRQ 18 [ 7.969107] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 7.969285] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 7.969484] uhci_hcd 0000:00:1d.2: detected 2 ports [ 7.969622] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001040 [ 7.969806] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 7.969926] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.970127] usb usb4: Product: UHCI Host Controller [ 7.970244] usb usb4: Manufacturer: Linux 4.9.16-gentoo uhci_hcd [ 7.970362] usb usb4: SerialNumber: 0000:00:1d.2 [ 7.970650] hub 4-0:1.0: USB hub found [ 7.970773] hub 4-0:1.0: 2 ports detected [ 7.971049] uhci_hcd 0000:00:1d.3: PCI->APIC IRQ transform: INT D -> IRQ 19 [ 7.971180] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 7.971366] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 7.971565] uhci_hcd 0000:00:1d.3: detected 2 ports [ 7.971703] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001060 [ 7.971885] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 7.972013] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.972206] usb usb5: Product: UHCI Host Controller [ 7.972323] usb usb5: Manufacturer: Linux 4.9.16-gentoo uhci_hcd [ 7.972441] usb usb5: SerialNumber: 0000:00:1d.3 [ 7.972728] hub 5-0:1.0: USB hub found [ 7.972852] hub 5-0:1.0: 2 ports detected [ 7.973128] uhci_hcd 0000:01:04.4: PCI->APIC IRQ transform: INT B -> IRQ 22 [ 7.973259] uhci_hcd 0000:01:04.4: UHCI Host Controller [ 7.973436] uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 6 [ 7.973641] uhci_hcd 0000:01:04.4: detected 8 ports [ 7.973758] uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports [ 7.974818] uhci_hcd 0000:01:04.4: irq 22, io base 0x00003800 [ 7.975207] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 7.975328] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.975521] usb usb6: Product: UHCI Host Controller [ 7.975637] usb usb6: Manufacturer: Linux 4.9.16-gentoo uhci_hcd [ 7.975756] usb usb6: SerialNumber: 0000:01:04.4 [ 7.976049] hub 6-0:1.0: USB hub found [ 7.976173] hub 6-0:1.0: 2 ports detected [ 7.976481] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 7.978395] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 7.978517] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 7.978817] mousedev: PS/2 mouse device common for all mice [ 7.979199] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 7.979345] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram, hpet irqs [ 7.979566] hidraw: raw HID events driver (C) Jiri Kosina [ 7.979856] usbcore: registered new interface driver usbhid [ 7.979973] usbhid: USB HID core driver [ 7.980125] drop_monitor: Initializing network drop monitor service [ 7.980347] Initializing XFRM netlink socket [ 7.980526] NET: Registered protocol family 10 [ 7.980992] NET: Registered protocol family 17 [ 7.981441] microcode: sig=0x6fb, pf=0x4, revision=0xb4 [ 7.981650] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 7.982067] registered taskstats version 1 [ 7.982185] Loading compiled-in X.509 certificates [ 8.011604] Loaded X.509 cert 'Build time autogenerated kernel key: 37e1880f1da7a8c0fc038240216ecb6920c39883' [ 8.011824] ima: No TPM chip found, activating TPM-bypass! [ 8.012579] rtc_cmos rtc_cmos: setting system clock to 2017-05-18 17:58:50 UTC (1495130330) [ 8.015386] Freeing unused kernel memory: 1380K (ffffffff81d32000 - ffffffff81e8b000) [ 8.015582] Write protecting the kernel read-only data: 12288k [ 8.017051] Freeing unused kernel memory: 1896K (ffff880001626000 - ffff880001800000) [ 8.021782] Freeing unused kernel memory: 1188K (ffff880001ad7000 - ffff880001c00000) [ 8.022102] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 8.289028] usb 6-1: new full-speed USB device number 2 using uhci_hcd [ 8.410568] usb 4-2: new low-speed USB device number 2 using uhci_hcd [ 8.429891] usb 6-1: New USB device found, idVendor=03f0, idProduct=1027 [ 8.429894] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.429897] usb 6-1: Product: Virtual Keyboard [ 8.429899] usb 6-1: Manufacturer: HP [ 8.440458] input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:1e.0/0000:01:04.4/usb6/6-1/6-1:1.0/0003:03F0:1027.0001/input/input3 [ 8.492425] hid-generic 0003:03F0:1027.0001: input,hidraw0: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1/input0 [ 8.500858] input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:1e.0/0000:01:04.4/usb6/6-1/6-1:1.1/0003:03F0:1027.0002/input/input4 [ 8.501051] hid-generic 0003:03F0:1027.0002: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1/input1 [ 8.575045] usb 4-2: New USB device found, idVendor=09da, idProduct=c10a [ 8.575049] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.575052] usb 4-2: Product: USB Mouse [ 8.575054] usb 4-2: Manufacturer: A4Tech [ 8.593789] input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/0003:09DA:C10A.0003/input/input5 [ 8.594071] hid-generic 0003:09DA:C10A.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [A4Tech USB Mouse] on usb-0000:00:1d.2-2/input0 [ 8.608029] tsc: Refined TSC clocksource calibration: 1599.999 MHz [ 8.608038] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x171023f09ff, max_idle_ns: 440795233615 ns [ 8.809041] ata_piix 0000:00:1f.1: version 2.13 [ 8.809063] ata_piix 0000:00:1f.1: PCI->APIC IRQ transform: INT A -> IRQ 17 [ 8.809948] scsi host0: ata_piix [ 8.810227] scsi host1: ata_piix [ 8.810313] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x500 irq 14 [ 8.810315] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x508 irq 15 [ 8.998318] ata1.00: ATAPI: DV-28E-V, C.AB, max UDMA/33 [ 9.019204] ata1.00: configured for UDMA/33 [ 9.026837] scsi 0:0:0:0: CD-ROM TEAC DV-28E-V C.AB PQ: 0 ANSI: 5 [ 9.085823] scsi 0:0:0:0: Attached scsi generic sg0 type 5 [ 9.122095] sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray [ 9.122099] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 9.122361] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 9.586859] imm: Version 2.05 (for Linux 2.4.0) [ 9.616149] clocksource: Switched to clocksource tsc [ 9.706771] Fusion MPT base driver 3.04.20 [ 9.706774] Copyright (c) 1999-2008 LSI Corporation [ 9.723222] Fusion MPT SPI Host driver 3.04.20 [ 9.736913] Fusion MPT FC Host driver 3.04.20 [ 9.751631] Fusion MPT SAS Host driver 3.04.20 [ 9.759540] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000. [ 9.767552] 3ware Storage Controller device driver for Linux v1.26.02.003. [ 9.775371] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. [ 9.801221] HP CISS Driver (v 3.6.26) [ 9.801459] cciss 0000:0f:08.0: using bridge 0000:0e:00.0 INT A to get IRQ 17 [ 9.801462] cciss 0000:0f:08.0: PCI->APIC IRQ transform: INT A -> IRQ 17 [ 9.881094] cciss 0000:0f:08.0: cciss0: <0x3238> at PCI 0000:0f:08.0 IRQ 32 using DAC [ 9.886604] cciss/c0d0: p1 p2 p3 p4 [ 9.887309] scsi host2: cciss [ 9.945709] Adaptec aacraid driver 1.2-1[41066]-ms [ 9.968385] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 9.973077] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 9.990758] megasas: 06.811.02.00-rc1 [ 10.059972] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.38-k. [ 10.111341] Emulex LightPulse Fibre Channel SCSI driver 11.2.0.0. [ 10.111344] Copyright(c) 2004-2016 Emulex. All rights reserved. [ 10.158541] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 10.269557] usbcore: registered new interface driver usb-storage [ 10.765327] device-mapper: uevent: version 1.0.3 [ 10.765447] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 10.867015] raid6: sse2x1 gen() 2152 MB/s [ 10.884005] raid6: sse2x1 xor() 2714 MB/s [ 10.901007] raid6: sse2x2 gen() 4125 MB/s [ 10.918005] raid6: sse2x2 xor() 3306 MB/s [ 10.935008] raid6: sse2x4 gen() 4609 MB/s [ 10.952011] raid6: sse2x4 xor() 3597 MB/s [ 10.952013] raid6: using algorithm sse2x4 gen() 4609 MB/s [ 10.952014] raid6: .... xor() 3597 MB/s, rmw enabled [ 10.952015] raid6: using ssse3x2 recovery algorithm [ 10.955300] async_tx: api initialized (async) [ 10.957840] xor: measuring software checksum speed [ 10.967006] prefetch64-sse: 6336.000 MB/sec [ 10.977005] generic_sse: 5640.000 MB/sec [ 10.977007] xor: using function: prefetch64-sse (6336.000 MB/sec) [ 11.003099] md: raid6 personality registered for level 6 [ 11.003103] md: raid5 personality registered for level 5 [ 11.003104] md: raid4 personality registered for level 4 [ 11.007544] device-mapper: raid: Loading target version 1.9.1 [ 11.018397] md: raid0 personality registered for level 0 [ 11.027474] md: raid1 personality registered for level 1 [ 11.073217] md: raid10 personality registered for level 10 [ 11.080813] md: linear personality registered for level -1 [ 11.326001] Btrfs loaded, crc32c=crc32c-generic [ 11.391566] JFS: nTxBlock = 8192, nTxLock = 65536 [ 11.411482] FS-Cache: Loaded [ 11.470695] RPC: Registered named UNIX socket transport module. [ 11.470697] RPC: Registered udp transport module. [ 11.470699] RPC: Registered tcp transport module. [ 11.470700] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 11.560547] FS-Cache: Netfs 'nfs' registered for caching [ 11.743020] SGI XFS with ACLs, security attributes, no debug enabled [ 11.779012] fuse init (API version 7.26) [ 11.806060] bnx2: QLogic bnx2 Gigabit Ethernet Driver v2.2.6 (January 29, 2014) [ 11.806115] bnx2 0000:03:00.0: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 12.179618] bnx2 0000:03:00.0 eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f4000000, IRQ 16, node addr 00:1e:0b:da:1f:fa [ 12.179698] bnx2 0000:05:00.0: PCI->APIC IRQ transform: INT A -> IRQ 17 [ 12.549591] bnx2 0000:05:00.0 eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f6000000, IRQ 17, node addr 00:1e:0b:da:1f:f8 [ 12.569028] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 12.569030] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 12.577200] dca service started, version 1.12.1 [ 12.588736] pps_core: LinuxPPS API ver. 1 registered [ 12.588739] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 12.594106] PTP clock support registered [ 12.621788] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 12.621791] igb: Copyright (c) 2007-2014 Intel Corporation. [ 12.634929] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de [ 12.657778] sky2: driver version 1.30 [ 12.712334] VMware vmxnet3 virtual NIC driver - version 1.4.a.0-k-NAPI [ 12.727120] Loading iSCSI transport class v2.0-870. [ 12.751536] iscsi: registered transport (tcp) [ 12.888871] EXT2-fs (cciss/c0d0p4): error: couldn't mount because of unsupported optional features (2c0) [ 12.889213] EXT4-fs (cciss!c0d0p4): couldn't mount as ext3 due to feature incompatibilities [ 13.062001] EXT4-fs (cciss!c0d0p4): mounted filesystem with ordered data mode. Opts: (null) [ 13.623549] random: crng init done [ 15.348426] udevd[2308]: starting version 3.1.5 [ 15.950623] bnx2 0000:03:00.0 enp3s0: renamed from eth0 [ 15.961377] bnx2 0000:05:00.0 enp5s0: renamed from eth1 [ 15.976402] hpwdt 0000:01:04.0: PCI->APIC IRQ transform: INT A -> IRQ 21 [ 15.976459] hpwdt 0000:01:04.0: HPE Watchdog Timer Driver: NMI decoding initialized, allow kernel dump: ON (default = 1/ON) [ 15.976541] hpwdt 0000:01:04.0: HPE Watchdog Timer Driver: 1.4.0, timer margin: 30 seconds (nowayout=0). [ 16.012112] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 16.061131] EDAC MC: Ver: 3.0.0 [ 16.255170] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 16.255173] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 16.255260] e1000e 0000:06:00.0: PCI->APIC IRQ transform: INT A -> IRQ 18 [ 16.255364] e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 16.302617] iTCO_vendor_support: vendor-support=0 [ 16.307932] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 16.307984] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 16.413111] EDAC MC0: Giving out device to module i5000_edac.c controller I5000: DEV 0000:00:10.0 (POLLED) [ 16.413144] EDAC PCI0: Giving out device to module i5000_edac controller EDAC PCI controller: DEV 0000:00:10.0 (POLLED) [ 16.434675] Error: Driver 'pcspkr' is already registered, aborting... [ 16.436452] e1000e 0000:06:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:18:71:eb:5b:56 [ 16.436455] e1000e 0000:06:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 16.436536] e1000e 0000:06:00.0 eth0: MAC: 1, PHY: 4, PBA No: D70413-003 [ 16.436599] e1000e 0000:0b:00.0: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 16.436709] e1000e 0000:0b:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 16.613042] e1000e 0000:0b:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:18:71:eb:7c:f9 [ 16.613046] e1000e 0000:0b:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 16.613130] e1000e 0000:0b:00.0 eth1: MAC: 1, PHY: 4, PBA No: D70413-003 [ 16.623740] e1000e 0000:06:00.0 enp6s0: renamed from eth0 [ 16.631192] e1000e 0000:0b:00.0 enp11s0: renamed from eth1 [ 16.982736] kvm: disabled by bios [ 17.003323] coretemp coretemp.0: Using relative temperature scale! [ 17.003344] coretemp coretemp.0: Using relative temperature scale! [ 17.003459] coretemp coretemp.3: Using relative temperature scale! [ 17.003483] coretemp coretemp.3: Using relative temperature scale! [ 17.005548] kvm: disabled by bios [ 17.013923] EXT4-fs (cciss!c0d0p4): re-mounted. Opts: (null) [ 17.230421] EXT4-fs (cciss!c0d0p2): mounted filesystem with ordered data mode. Opts: (null) [ 19.892983] bnx2 0000:03:00.0: Direct firmware load for bnx2/bnx2-mips-06-6.2.3.fw failed with error -2 [ 19.892987] bnx2: Can't load firmware file "bnx2/bnx2-mips-06-6.2.3.fw" [ 19.893162] bnx2 0000:05:00.0: Direct firmware load for bnx2/bnx2-mips-06-6.2.3.fw failed with error -2 [ 19.893165] bnx2: Can't load firmware file "bnx2/bnx2-mips-06-6.2.3.fw" [ 20.152431] IPv6: ADDRCONF(NETDEV_UP): enp6s0: link is not ready [ 20.408426] IPv6: ADDRCONF(NETDEV_UP): enp11s0: link is not ready [ 21.505018] e1000e: enp6s0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 21.505140] e1000e 0000:06:00.0 enp6s0: 10/100 speed: disabling TSO [ 21.505220] IPv6: ADDRCONF(NETDEV_CHANGE): enp6s0: link becomes ready [ 21.560765] sddm[3105]: segfault at 900 ip 0000000000000900 sp 00007ffe33c1d708 error 14 in sddm[400000+6f000]