spacepaste

  1.  
  2. # smartctl -a /dev/sda
  3. smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.19.5-gentoo] (local build)
  4. Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
  5. === START OF INFORMATION SECTION ===
  6. Model Family: Western Digital Blue
  7. Device Model: WDC WD10EZEX-00WN4A0
  8. Serial Number: WD-WCC6Y2NRSRSZ
  9. LU WWN Device Id: 5 0014ee 2b8162f7d
  10. Firmware Version: 01.01A01
  11. User Capacity: 1,000,204,886,016 bytes [1.00 TB]
  12. Sector Sizes: 512 bytes logical, 4096 bytes physical
  13. Rotation Rate: 7200 rpm
  14. Form Factor: 3.5 inches
  15. Device is: In smartctl database [for details use: -P show]
  16. ATA Version is: ACS-3 T13/2161-D revision 3b
  17. SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  18. Local Time is: Fri Nov 30 19:56:01 2018 EST
  19. SMART support is: Available - device has SMART capability.
  20. SMART support is: Enabled
  21. === START OF READ SMART DATA SECTION ===
  22. SMART overall-health self-assessment test result: PASSED
  23. General SMART Values:
  24. Offline data collection status: (0x82) Offline data collection activity
  25. was completed without error.
  26. Auto Offline Data Collection: Enabled.
  27. Self-test execution status: ( 0) The previous self-test routine completed
  28. without error or no self-test has ever
  29. been run.
  30. Total time to complete Offline
  31. data collection: (11220) seconds.
  32. Offline data collection
  33. capabilities: (0x7b) SMART execute Offline immediate.
  34. Auto Offline data collection on/off support.
  35. Suspend Offline collection upon new
  36. command.
  37. Offline surface scan supported.
  38. Self-test supported.
  39. Conveyance Self-test supported.
  40. Selective Self-test supported.
  41. SMART capabilities: (0x0003) Saves SMART data before entering
  42. power-saving mode.
  43. Supports SMART auto save timer.
  44. Error logging capability: (0x01) Error logging supported.
  45. General Purpose Logging supported.
  46. Short self-test routine
  47. recommended polling time: ( 2) minutes.
  48. Extended self-test routine
  49. recommended polling time: ( 116) minutes.
  50. Conveyance self-test routine
  51. recommended polling time: ( 5) minutes.
  52. SCT capabilities: (0x3035) SCT Status supported.
  53. SCT Feature Control supported.
  54. SCT Data Table supported.
  55. SMART Attributes Data Structure revision number: 16
  56. Vendor Specific SMART Attributes with Thresholds:
  57. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  58. 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
  59. 3 Spin_Up_Time 0x0027 191 166 021 Pre-fail Always - 1433
  60. 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1854
  61. 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
  62. 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
  63. 9 Power_On_Hours 0x0032 077 077 000 Old_age Always - 16893
  64. 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
  65. 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
  66. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 415
  67. 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 266
  68. 193 Load_Cycle_Count 0x0032 198 198 000 Old_age Always - 8582
  69. 194 Temperature_Celsius 0x0022 099 096 000 Old_age Always - 44
  70. 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
  71. 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
  72. 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
  73. 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
  74. 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
  75. SMART Error Log Version: 1
  76. No Errors Logged
  77. SMART Self-test log structure revision number 1
  78. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  79. # 1 Extended offline Completed without error 00% 16885 -
  80. # 2 Short offline Completed without error 00% 5903 -
  81. SMART Selective self-test log data structure revision number 1
  82. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  83. 1 0 0 Not_testing
  84. 2 0 0 Not_testing
  85. 3 0 0 Not_testing
  86. 4 0 0 Not_testing
  87. 5 0 0 Not_testing
  88. Selective self-test flags (0x0):
  89. After scanning selected spans, do NOT read-scan remainder of disk.
  90. If Selective self-test is pending on power-up, resume after 0 minute delay.
  91.