spacepaste

Paste details

reply | raw

  1.  
  2. # /usr/sbin/smartctl -a /dev/sda
  3. smartctl 6.4 2015-06-04 r4109 [x86_64-linux-4.4.39-gentoo] (local build)
  4. Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
  6. === START OF INFORMATION SECTION ===
  7. Model Family: SandForce Driven SSDs
  8. Device Model: Corsair Force GT
  9. Serial Number: 124379090000148501C1
  10. LU WWN Device Id: 0 000000 000000000
  11. Firmware Version: 5.03
  12. User Capacity: 60.022.480.896 bytes [60,0 GB]
  13. Sector Size: 512 bytes logical/physical
  14. Rotation Rate: Solid State Device
  15. Device is: In smartctl database [for details use: -P show]
  16. ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3
  17. SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
  18. Local Time is: Sun Feb 26 15:36:51 2017 CET
  19. SMART support is: Available - device has SMART capability.
  20. SMART support is: Enabled
  22. === START OF READ SMART DATA SECTION ===
  23. SMART overall-health self-assessment test result: PASSED
  25. General SMART Values:
  26. Offline data collection status: (0x00) Offline data collection activity
  27. was never started.
  28. Auto Offline Data Collection: Disabled.
  29. Self-test execution status: ( 0) The previous self-test routine completed
  30. without error or no self-test has ever
  31. been run.
  32. Total time to complete Offline
  33. data collection: ( 0) seconds.
  34. Offline data collection
  35. capabilities: (0x7b) SMART execute Offline immediate.
  36. Auto Offline data collection on/off support.
  37. Suspend Offline collection upon new
  38. command.
  39. Offline surface scan supported.
  40. Self-test supported.
  41. Conveyance Self-test supported.
  42. Selective Self-test supported.
  43. SMART capabilities: (0x0003) Saves SMART data before entering
  44. power-saving mode.
  45. Supports SMART auto save timer.
  46. Error logging capability: (0x01) Error logging supported.
  47. General Purpose Logging supported.
  48. Short self-test routine
  49. recommended polling time: ( 1) minutes.
  50. Extended self-test routine
  51. recommended polling time: ( 48) minutes.
  52. Conveyance self-test routine
  53. recommended polling time: ( 2) minutes.
  54. SCT capabilities: (0x0021) SCT Status supported.
  55. SCT Data Table supported.
  57. SMART Attributes Data Structure revision number: 10
  58. Vendor Specific SMART Attributes with Thresholds:
  59. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  60. 1 Raw_Read_Error_Rate 0x000f 120 120 050 Pre-fail Always - 0/0
  61. 5 Retired_Block_Count 0x0033 100 100 003 Pre-fail Always - 0
  62. 9 Power_On_Hours_and_Msec 0x0032 000 000 000 Old_age Always - 6216h+47m+19.320s
  63. 12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2625
  64. 171 Program_Fail_Count 0x0032 000 000 000 Old_age Always - 0
  65. 172 Erase_Fail_Count 0x0032 000 000 000 Old_age Always - 0
  66. 174 Unexpect_Power_Loss_Ct 0x0030 000 000 000 Old_age Offline - 298
  67. 177 Wear_Range_Delta 0x0000 000 000 000 Old_age Offline - 0
  68. 181 Program_Fail_Count 0x0032 000 000 000 Old_age Always - 0
  69. 182 Erase_Fail_Count 0x0032 000 000 000 Old_age Always - 0
  70. 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
  71. 194 Temperature_Celsius 0x0022 030 049 000 Old_age Always - 30 (Min/Max 13/49)
  72. 195 ECC_Uncorr_Error_Count 0x001c 100 100 000 Old_age Offline - 0/0
  73. 196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always - 0
  74. 201 Unc_Soft_Read_Err_Rate 0x001c 100 100 000 Old_age Offline - 0/0
  75. 204 Soft_ECC_Correct_Rate 0x001c 100 100 000 Old_age Offline - 0/0
  76. 230 Life_Curve_Status 0x0013 100 100 000 Pre-fail Always - 100
  77. 231 SSD_Life_Left 0x0013 100 100 010 Pre-fail Always - 0
  78. 233 SandForce_Internal 0x0000 000 000 000 Old_age Offline - 1627
  79. 234 SandForce_Internal 0x0032 000 000 000 Old_age Always - 2678
  80. 241 Lifetime_Writes_GiB 0x0032 000 000 000 Old_age Always - 2678
  81. 242 Lifetime_Reads_GiB 0x0032 000 000 000 Old_age Always - 3251
  83. SMART Error Log not supported
  85. SMART Self-test Log not supported
  87. SMART Selective self-test log data structure revision number 1
  88. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  89. 1 0 0 Not_testing
  90. 2 0 0 Not_testing
  91. 3 0 0 Not_testing
  92. 4 0 0 Not_testing
  93. 5 0 0 Not_testing
  94. Selective self-test flags (0x0):
  95. After scanning selected spans, do NOT read-scan remainder of disk.
  96. If Selective self-test is pending on power-up, resume after 0 minute delay.
  97.  
Powered by spacepaste. Paste removal.