spacepaste

  1.  
  2. # dmesg
  3. [ 0.000000] Linux version 4.5.2-aufs-r1 (root@jasmin) (gcc version 5.4.0 (Gentoo 5.4.0 p1.0, pie-0.6.5) ) #1 SMP Sun Jul 3 17:17:11 UTC 2016
  4. [ 0.000000] Command line: BOOT_IMAGE=/isolinux/gentoo root=/dev/ram0 init=/linuxrc aufs looptype=squashfs loop=/image.squashfs cdroot vconsole.keymap=us locale=en_US console=tty1 --
  5. [ 0.000000] KERNEL supported cpus:
  6. [ 0.000000] Intel GenuineIntel
  7. [ 0.000000] AMD AuthenticAMD
  8. [ 0.000000] Centaur CentaurHauls
  9. [ 0.000000] tseg: 00df000000
  10. [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
  11. [ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
  12. [ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
  13. [ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
  14. [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
  15. [ 0.000000] x86/fpu: Using 'lazy' FPU context switches.
  16. [ 0.000000] e820: BIOS-provided physical RAM map:
  17. [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
  18. [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dc9f2fff] usable
  19. [ 0.000000] BIOS-e820: [mem 0x00000000dc9f3000-0x00000000dca33fff] reserved
  20. [ 0.000000] BIOS-e820: [mem 0x00000000dca34000-0x00000000dccf7fff] usable
  21. [ 0.000000] BIOS-e820: [mem 0x00000000dccf8000-0x00000000dcdc2fff] ACPI NVS
  22. [ 0.000000] BIOS-e820: [mem 0x00000000dcdc3000-0x00000000de173fff] reserved
  23. [ 0.000000] BIOS-e820: [mem 0x00000000de174000-0x00000000de1b0fff] type 20
  24. [ 0.000000] BIOS-e820: [mem 0x00000000de1b1000-0x00000000de1b1fff] usable
  25. [ 0.000000] BIOS-e820: [mem 0x00000000de1b2000-0x00000000de3b7fff] ACPI NVS
  26. [ 0.000000] BIOS-e820: [mem 0x00000000de3b8000-0x00000000de84bfff] usable
  27. [ 0.000000] BIOS-e820: [mem 0x00000000de84c000-0x00000000defdcfff] reserved
  28. [ 0.000000] BIOS-e820: [mem 0x00000000defdd000-0x00000000deffffff] usable
  29. [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
  30. [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
  31. [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
  32. [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
  33. [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
  34. [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
  35. [ 0.000000] NX (Execute Disable) protection: active
  36. [ 0.000000] efi: EFI v2.31 by American Megatrends
  37. [ 0.000000] efi: ACPI=0xdcd7c000 ACPI 2.0=0xdcd7c000 SMBIOS=0xf04c0 MPS=0xfd490
  38. [ 0.000000] SMBIOS 2.7 present.
  39. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./F2A88X-UP4, BIOS F3 12/16/2013
  40. [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
  41. [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
  42. [ 0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x400000000
  43. [ 0.000000] MTRR default type: uncachable
  44. [ 0.000000] MTRR fixed ranges enabled:
  45. [ 0.000000] 00000-9FFFF write-back
  46. [ 0.000000] A0000-BFFFF write-through
  47. [ 0.000000] C0000-CFFFF write-protect
  48. [ 0.000000] D0000-DFFFF uncachable
  49. [ 0.000000] E0000-FFFFF write-protect
  50. [ 0.000000] MTRR variable ranges enabled:
  51. [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
  52. [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
  53. [ 0.000000] 2 base 0000C0000000 mask FFFFC0000000 write-back
  54. [ 0.000000] 3 base 0000E0000000 mask FFFFE0000000 uncachable
  55. [ 0.000000] 4 disabled
  56. [ 0.000000] 5 disabled
  57. [ 0.000000] 6 disabled
  58. [ 0.000000] 7 disabled
  59. [ 0.000000] TOM2: 000000021f000000 aka 8688M
  60. [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
  61. [ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
  62. [ 0.000000] e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
  63. [ 0.000000] found SMP MP-table at [mem 0x000fd820-0x000fd82f] mapped at [ffff8800000fd820]
  64. [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
  65. [ 0.000000] Using GB pages for direct mapping
  66. [ 0.000000] BRK [0x24b4e000, 0x24b4efff] PGTABLE
  67. [ 0.000000] BRK [0x24b4f000, 0x24b4ffff] PGTABLE
  68. [ 0.000000] BRK [0x24b50000, 0x24b50fff] PGTABLE
  69. [ 0.000000] BRK [0x24b51000, 0x24b51fff] PGTABLE
  70. [ 0.000000] BRK [0x24b52000, 0x24b52fff] PGTABLE
  71. [ 0.000000] BRK [0x24b53000, 0x24b53fff] PGTABLE
  72. [ 0.000000] RAMDISK: [mem 0x37118000-0x37883fff]
  73. [ 0.000000] ACPI: Early table checksum verification disabled
  74. [ 0.000000] ACPI: RSDP 0x00000000DCD7C000 000024 (v02 ALASKA)
  75. [ 0.000000] ACPI: XSDT 0x00000000DCD7C088 00008C (v01 ALASKA A M I 01072009 AMI 00010013)
  76. [ 0.000000] ACPI: FACP 0x00000000DCD82208 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
  77. [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20160108/tbfadt-654)
  78. [ 0.000000] ACPI: DSDT 0x00000000DCD7C1A8 00605A (v02 ALASKA A M I 00000000 INTL 20051117)
  79. [ 0.000000] ACPI: FACS 0x00000000DCDB8080 000040
  80. [ 0.000000] ACPI: APIC 0x00000000DCD82318 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
  81. [ 0.000000] ACPI: FPDT 0x00000000DCD82390 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
  82. [ 0.000000] ACPI: MCFG 0x00000000DCD823D8 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
  83. [ 0.000000] ACPI: HPET 0x00000000DCD82418 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
  84. [ 0.000000] ACPI: IVRS 0x00000000DCD82450 000068 (v02 AMD BANTRY 00000001 AMD 00000000)
  85. [ 0.000000] ACPI: SSDT 0x00000000DCD824B8 000B9C (v01 AMD BANTRY 00000001 AMD 00000001)
  86. [ 0.000000] ACPI: SSDT 0x00000000DCD83058 0004B7 (v02 AMD BANTRY 00000001 MSFT 04000000)
  87. [ 0.000000] ACPI: CRAT 0x00000000DCD83510 000578 (v01 AMD BANTRY 00000001 AMD 00000001)
  88. [ 0.000000] ACPI: BGRT 0x00000000DCD83A88 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
  89. [ 0.000000] ACPI: SSDT 0x00000000DCD83AC0 000852 (v01 AMD CPMDFDGP 00000001 INTL 20051117)
  90. [ 0.000000] ACPI: SSDT 0x00000000DCD84318 001459 (v01 AMD CPMDFIGP 00000001 INTL 20051117)
  91. [ 0.000000] ACPI: SSDT 0x00000000DCD85778 00122C (v01 AMD CPMCMN 00000001 INTL 20051117)
  92. [ 0.000000] ACPI: Local APIC address 0xfee00000
  93. [ 0.000000] Zone ranges:
  94. [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
  95. [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
  96. [ 0.000000] Normal [mem 0x0000000100000000-0x000000021effffff]
  97. [ 0.000000] Movable zone start for each node
  98. [ 0.000000] Early memory node ranges
  99. [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
  100. [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000dc9f2fff]
  101. [ 0.000000] node 0: [mem 0x00000000dca34000-0x00000000dccf7fff]
  102. [ 0.000000] node 0: [mem 0x00000000de1b1000-0x00000000de1b1fff]
  103. [ 0.000000] node 0: [mem 0x00000000de3b8000-0x00000000de84bfff]
  104. [ 0.000000] node 0: [mem 0x00000000defdd000-0x00000000deffffff]
  105. [ 0.000000] node 0: [mem 0x0000000100000000-0x000000021effffff]
  106. [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021effffff]
  107. [ 0.000000] On node 0 totalpages: 2081038
  108. [ 0.000000] DMA zone: 56 pages used for memmap
  109. [ 0.000000] DMA zone: 26 pages reserved
  110. [ 0.000000] DMA zone: 3999 pages, LIFO batch:0
  111. [ 0.000000] DMA32 zone: 12326 pages used for memmap
  112. [ 0.000000] DMA32 zone: 901487 pages, LIFO batch:31
  113. [ 0.000000] Normal zone: 16072 pages used for memmap
  114. [ 0.000000] Normal zone: 1175552 pages, LIFO batch:31
  115. [ 0.000000] ACPI: PM-Timer IO Port: 0x808
  116. [ 0.000000] ACPI: Local APIC address 0xfee00000
  117. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
  118. [ 0.000000] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
  119. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  120. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
  121. [ 0.000000] ACPI: IRQ0 used by override.
  122. [ 0.000000] ACPI: IRQ9 used by override.
  123. [ 0.000000] Using ACPI (MADT) for SMP configuration information
  124. [ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
  125. [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
  126. [ 0.000000] e820: [mem 0xdf000000-0xfebfffff] available for PCI devices
  127. [ 0.000000] Booting paravirtualized kernel on bare hardware
  128. [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
  129. [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
  130. [ 0.000000] PERCPU: Embedded 32 pages/cpu @ffff88021ec00000 s90328 r8192 d32552 u524288
  131. [ 0.000000] pcpu-alloc: s90328 r8192 d32552 u524288 alloc=1*2097152
  132. [ 0.000000] pcpu-alloc: [0] 0 1 2 3
  133. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2052558
  134. [ 0.000000] Kernel command line: BOOT_IMAGE=/isolinux/gentoo root=/dev/ram0 init=/linuxrc aufs looptype=squashfs loop=/image.squashfs cdroot vconsole.keymap=us locale=en_US console=tty1 --
  135. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  136. [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
  137. [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
  138. [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
  139. [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
  140. [ 0.000000] Memory: 7891536K/8324152K available (5358K kernel code, 481K rwdata, 2712K rodata, 1016K init, 16188K bss, 432616K reserved, 0K cma-reserved)
  141. [ 0.000000] Hierarchical RCU implementation.
  142. [ 0.000000] Build-time adjustment of leaf fanout to 64.
  143. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
  144. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
  145. [ 0.000000] NR_IRQS:4352 nr_irqs:456 16
  146. [ 0.000000] Console: colour dummy device 80x25
  147. [ 0.000000] console [tty1] enabled
  148. [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
  149. [ 0.000000] hpet clockevent registered
  150. [ 0.000000] tsc: Fast TSC calibration using PIT
  151. [ 0.000000] tsc: Detected 4092.467 MHz processor
  152. [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 8184.93 BogoMIPS (lpj=4092467)
  153. [ 0.000008] pid_max: default: 32768 minimum: 301
  154. [ 0.000015] ACPI: Core revision 20160108
  155. [ 0.003567] ACPI: 6 ACPI AML tables successfully acquired and loaded
  156. [ 0.004288] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
  157. [ 0.004292] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
  158. [ 0.004503] CPU: Physical Processor ID: 0
  159. [ 0.004506] CPU: Processor Core ID: 0
  160. [ 0.004509] mce: CPU supports 7 MCE banks
  161. [ 0.004520] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
  162. [ 0.004523] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
  163. [ 0.004739] Freeing SMP alternatives memory: 24K (ffffffffa3b78000 - ffffffffa3b7e000)
  164. [ 0.011464] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  165. [ 0.122490] smpboot: CPU0: AMD A10-6800K APU with Radeon(tm) HD Graphics (family: 0x15, model: 0x13, stepping: 0x1)
  166. [ 0.122513] Performance Events: Fam15h core perfctr, AMD PMU driver.
  167. [ 0.122520] ... version: 0
  168. [ 0.122522] ... bit width: 48
  169. [ 0.122525] ... generic registers: 6
  170. [ 0.122528] ... value mask: 0000ffffffffffff
  171. [ 0.122530] ... max period: 00007fffffffffff
  172. [ 0.122533] ... fixed-purpose events: 0
  173. [ 0.122535] ... event mask: 000000000000003f
  174. [ 0.122677] MCE: In-kernel MCE decoding enabled.
  175. [ 0.122746] x86: Booting SMP configuration:
  176. [ 0.122749] .... node #0, CPUs: #1 #2 #3
  177. [ 0.129606] x86: Booted up 1 node, 4 CPUs
  178. [ 0.129613] smpboot: Total of 4 processors activated (32739.73 BogoMIPS)
  179. [ 0.130373] devtmpfs: initialized
  180. [ 0.130671] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
  181. [ 0.130805] NET: Registered protocol family 16
  182. [ 0.133555] cpuidle: using governor ladder
  183. [ 0.137552] cpuidle: using governor menu
  184. [ 0.137717] ACPI: bus type PCI registered
  185. [ 0.137805] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
  186. [ 0.137811] PCI: not using MMCONFIG
  187. [ 0.137814] PCI: Using configuration type 1 for base access
  188. [ 0.137817] PCI: Using configuration type 1 for extended access
  189. [ 0.142927] ACPI: Added _OSI(Module Device)
  190. [ 0.142933] ACPI: Added _OSI(Processor Device)
  191. [ 0.142936] ACPI: Added _OSI(3.0 _SCP Extensions)
  192. [ 0.142938] ACPI: Added _OSI(Processor Aggregator Device)
  193. [ 0.143789] ACPI: Executed 1 blocks of module-level executable AML code
  194. [ 0.146134] ACPI: Interpreter enabled
  195. [ 0.146140] ACPI: (supports S0 S5)
  196. [ 0.146144] ACPI: Using IOAPIC for interrupt routing
  197. [ 0.146269] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
  198. [ 0.146298] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
  199. [ 0.146305] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
  200. [ 0.146593] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
  201. [ 0.146928] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
  202. [ 0.147010] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
  203. [ 0.147137] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
  204. [ 0.150932] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
  205. [ 0.150939] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
  206. [ 0.151093] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
  207. [ 0.151192] PCI host bridge to bus 0000:00
  208. [ 0.151196] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
  209. [ 0.151200] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
  210. [ 0.151204] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
  211. [ 0.151207] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
  212. [ 0.151210] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
  213. [ 0.151215] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
  214. [ 0.151220] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff window]
  215. [ 0.151225] pci_bus 0000:00: root bus resource [bus 00-ff]
  216. [ 0.151233] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
  217. [ 0.151351] pci 0000:00:00.2: [1022:1419] type 00 class 0x080600
  218. [ 0.151464] pci 0000:00:02.0: [1022:1412] type 01 class 0x060400
  219. [ 0.151497] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
  220. [ 0.151568] pci 0000:00:04.0: [1022:1414] type 01 class 0x060400
  221. [ 0.151599] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
  222. [ 0.151669] pci 0000:00:07.0: [1022:1417] type 01 class 0x060400
  223. [ 0.151700] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
  224. [ 0.151729] pci 0000:00:07.0: System wakeup disabled by ACPI
  225. [ 0.151789] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
  226. [ 0.151809] pci 0000:00:10.0: reg 0x10: [mem 0xfe306000-0xfe307fff 64bit]
  227. [ 0.151893] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
  228. [ 0.151928] pci 0000:00:10.0: System wakeup disabled by ACPI
  229. [ 0.151982] pci 0000:00:10.1: [1022:7814] type 00 class 0x0c0330
  230. [ 0.152001] pci 0000:00:10.1: reg 0x10: [mem 0xfe304000-0xfe305fff 64bit]
  231. [ 0.152087] pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
  232. [ 0.152122] pci 0000:00:10.1: System wakeup disabled by ACPI
  233. [ 0.152174] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
  234. [ 0.152187] pci 0000:00:11.0: reg 0x10: [io 0xf040-0xf047]
  235. [ 0.152195] pci 0000:00:11.0: reg 0x14: [io 0xf030-0xf033]
  236. [ 0.152202] pci 0000:00:11.0: reg 0x18: [io 0xf020-0xf027]
  237. [ 0.152210] pci 0000:00:11.0: reg 0x1c: [io 0xf010-0xf013]
  238. [ 0.152217] pci 0000:00:11.0: reg 0x20: [io 0xf000-0xf00f]
  239. [ 0.152224] pci 0000:00:11.0: reg 0x24: [mem 0xfe30d000-0xfe30d7ff]
  240. [ 0.152322] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
  241. [ 0.152333] pci 0000:00:12.0: reg 0x10: [mem 0xfe30c000-0xfe30cfff]
  242. [ 0.152422] pci 0000:00:12.0: System wakeup disabled by ACPI
  243. [ 0.152470] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
  244. [ 0.152485] pci 0000:00:12.2: reg 0x10: [mem 0xfe30b000-0xfe30b0ff]
  245. [ 0.152546] pci 0000:00:12.2: supports D1 D2
  246. [ 0.152547] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
  247. [ 0.152577] pci 0000:00:12.2: System wakeup disabled by ACPI
  248. [ 0.152627] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
  249. [ 0.152637] pci 0000:00:13.0: reg 0x10: [mem 0xfe30a000-0xfe30afff]
  250. [ 0.152707] pci 0000:00:13.0: System wakeup disabled by ACPI
  251. [ 0.152756] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
  252. [ 0.152769] pci 0000:00:13.2: reg 0x10: [mem 0xfe309000-0xfe3090ff]
  253. [ 0.152830] pci 0000:00:13.2: supports D1 D2
  254. [ 0.152831] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
  255. [ 0.152862] pci 0000:00:13.2: System wakeup disabled by ACPI
  256. [ 0.152911] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
  257. [ 0.153010] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
  258. [ 0.153026] pci 0000:00:14.2: reg 0x10: [mem 0xfe300000-0xfe303fff 64bit]
  259. [ 0.153077] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
  260. [ 0.153108] pci 0000:00:14.2: System wakeup disabled by ACPI
  261. [ 0.153154] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
  262. [ 0.153272] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
  263. [ 0.153325] pci 0000:00:14.4: System wakeup disabled by ACPI
  264. [ 0.153381] pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
  265. [ 0.153391] pci 0000:00:14.5: reg 0x10: [mem 0xfe308000-0xfe308fff]
  266. [ 0.153470] pci 0000:00:14.5: System wakeup disabled by ACPI
  267. [ 0.153521] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
  268. [ 0.153574] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
  269. [ 0.153626] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
  270. [ 0.153677] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
  271. [ 0.153733] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
  272. [ 0.153784] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
  273. [ 0.153917] pci 0000:01:00.0: [10de:128b] type 00 class 0x030000
  274. [ 0.153925] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
  275. [ 0.153933] pci 0000:01:00.0: reg 0x14: [mem 0xf0000000-0xf7ffffff 64bit pref]
  276. [ 0.153941] pci 0000:01:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit pref]
  277. [ 0.153947] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
  278. [ 0.153952] pci 0000:01:00.0: reg 0x30: [mem 0xfe000000-0xfe07ffff pref]
  279. [ 0.154020] pci 0000:01:00.1: [10de:0e0f] type 00 class 0x040300
  280. [ 0.154028] pci 0000:01:00.1: reg 0x10: [mem 0xfe080000-0xfe083fff]
  281. [ 0.156161] pci 0000:00:02.0: PCI bridge to [bus 01]
  282. [ 0.156176] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
  283. [ 0.156181] pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff]
  284. [ 0.156186] pci 0000:00:02.0: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
  285. [ 0.156270] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
  286. [ 0.156289] pci 0000:02:00.0: reg 0x10: [io 0xd000-0xd0ff]
  287. [ 0.156312] pci 0000:02:00.0: reg 0x18: [mem 0xfe200000-0xfe200fff 64bit]
  288. [ 0.156328] pci 0000:02:00.0: reg 0x20: [mem 0xfa100000-0xfa103fff 64bit pref]
  289. [ 0.156427] pci 0000:02:00.0: supports D1 D2
  290. [ 0.156430] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  291. [ 0.156474] pci 0000:02:00.0: System wakeup disabled by ACPI
  292. [ 0.159165] pci 0000:00:04.0: PCI bridge to [bus 02]
  293. [ 0.159179] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
  294. [ 0.159184] pci 0000:00:04.0: bridge window [mem 0xfe200000-0xfe2fffff]
  295. [ 0.159189] pci 0000:00:04.0: bridge window [mem 0xfa100000-0xfa1fffff 64bit pref]
  296. [ 0.159273] pci 0000:03:00.0: [1106:3483] type 00 class 0x0c0330
  297. [ 0.159292] pci 0000:03:00.0: reg 0x10: [mem 0xfe100000-0xfe100fff 64bit]
  298. [ 0.159384] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  299. [ 0.161160] pci 0000:00:07.0: PCI bridge to [bus 03]
  300. [ 0.161176] pci 0000:00:07.0: bridge window [mem 0xfe100000-0xfe1fffff]
  301. [ 0.161345] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
  302. [ 0.161368] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode)
  303. [ 0.161371] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
  304. [ 0.161374] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode)
  305. [ 0.161377] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
  306. [ 0.161380] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
  307. [ 0.161383] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
  308. [ 0.161386] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xffffffff window] (subtractive decode)
  309. [ 0.161408] pci_bus 0000:00: on NUMA node 0
  310. [ 0.161926] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
  311. [ 0.161978] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
  312. [ 0.162030] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
  313. [ 0.162081] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
  314. [ 0.162127] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
  315. [ 0.162160] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
  316. [ 0.162194] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
  317. [ 0.162226] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
  318. [ 0.162456] vgaarb: setting as boot device: PCI:0000:01:00.0
  319. [ 0.162460] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
  320. [ 0.162465] vgaarb: loaded
  321. [ 0.162468] vgaarb: bridge control possible 0000:01:00.0
  322. [ 0.162538] SCSI subsystem initialized
  323. [ 0.162588] libata version 3.00 loaded.
  324. [ 0.162593] ACPI: bus type USB registered
  325. [ 0.162611] usbcore: registered new interface driver usbfs
  326. [ 0.162621] usbcore: registered new interface driver hub
  327. [ 0.162637] usbcore: registered new device driver usb
  328. [ 0.162770] PCI: Using ACPI for IRQ routing
  329. [ 0.169398] PCI: pci_cache_line_size set to 64 bytes
  330. [ 0.169443] e820: reserve RAM buffer [mem 0xdc9f3000-0xdfffffff]
  331. [ 0.169445] e820: reserve RAM buffer [mem 0xdccf8000-0xdfffffff]
  332. [ 0.169447] e820: reserve RAM buffer [mem 0xde1b2000-0xdfffffff]
  333. [ 0.169448] e820: reserve RAM buffer [mem 0xde84c000-0xdfffffff]
  334. [ 0.169449] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
  335. [ 0.169450] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
  336. [ 0.169648] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
  337. [ 0.169652] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
  338. [ 0.171695] clocksource: Switched to clocksource hpet
  339. [ 0.171720] VFS: Disk quotas dquot_6.6.0
  340. [ 0.171737] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  341. [ 0.173745] pnp: PnP ACPI init
  342. [ 0.173808] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
  343. [ 0.173813] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
  344. [ 0.173867] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
  345. [ 0.173921] system 00:02: [mem 0xfeb80000-0xfebfffff] has been reserved
  346. [ 0.173926] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
  347. [ 0.174060] system 00:03: [io 0x0220-0x0227] has been reserved
  348. [ 0.174064] system 00:03: [io 0x0228-0x0237] has been reserved
  349. [ 0.174067] system 00:03: [io 0x0a20-0x0a2f] has been reserved
  350. [ 0.174071] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
  351. [ 0.174103] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
  352. [ 0.174315] pnp 00:05: [dma 0 disabled]
  353. [ 0.174347] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
  354. [ 0.174377] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
  355. [ 0.174396] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
  356. [ 0.174489] system 00:08: [io 0x04d0-0x04d1] has been reserved
  357. [ 0.174493] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
  358. [ 0.174682] system 00:09: [io 0x04d0-0x04d1] has been reserved
  359. [ 0.174686] system 00:09: [io 0x040b] has been reserved
  360. [ 0.174689] system 00:09: [io 0x04d6] has been reserved
  361. [ 0.174712] system 00:09: [io 0x0c00-0x0c01] has been reserved
  362. [ 0.174716] system 00:09: [io 0x0c14] has been reserved
  363. [ 0.174719] system 00:09: [io 0x0c50-0x0c51] has been reserved
  364. [ 0.174723] system 00:09: [io 0x0c52] has been reserved
  365. [ 0.174726] system 00:09: [io 0x0c6c] has been reserved
  366. [ 0.174729] system 00:09: [io 0x0c6f] has been reserved
  367. [ 0.174733] system 00:09: [io 0x0cd0-0x0cd1] has been reserved
  368. [ 0.174736] system 00:09: [io 0x0cd2-0x0cd3] has been reserved
  369. [ 0.174739] system 00:09: [io 0x0cd4-0x0cd5] has been reserved
  370. [ 0.174743] system 00:09: [io 0x0cd6-0x0cd7] has been reserved
  371. [ 0.174746] system 00:09: [io 0x0cd8-0x0cdf] has been reserved
  372. [ 0.174750] system 00:09: [io 0x0800-0x089f] could not be reserved
  373. [ 0.174753] system 00:09: [io 0x0b20-0x0b3f] has been reserved
  374. [ 0.174757] system 00:09: [io 0x0900-0x090f] has been reserved
  375. [ 0.174760] system 00:09: [io 0x0910-0x091f] has been reserved
  376. [ 0.174763] system 00:09: [io 0xfe00-0xfefe] has been reserved
  377. [ 0.174767] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
  378. [ 0.174771] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
  379. [ 0.174775] system 00:09: [mem 0xfed80000-0xfed8ffff] has been reserved
  380. [ 0.174779] system 00:09: [mem 0xfed61000-0xfed70fff] has been reserved
  381. [ 0.174783] system 00:09: [mem 0xfec10000-0xfec10fff] has been reserved
  382. [ 0.174787] system 00:09: [mem 0xfed00000-0xfed00fff] could not be reserved
  383. [ 0.174790] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
  384. [ 0.174794] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
  385. [ 0.174923] pnp: PnP ACPI: found 10 devices
  386. [ 0.179758] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
  387. [ 0.179778] pci 0000:00:02.0: PCI bridge to [bus 01]
  388. [ 0.179782] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
  389. [ 0.179787] pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff]
  390. [ 0.179791] pci 0000:00:02.0: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
  391. [ 0.179797] pci 0000:00:04.0: PCI bridge to [bus 02]
  392. [ 0.179801] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
  393. [ 0.179805] pci 0000:00:04.0: bridge window [mem 0xfe200000-0xfe2fffff]
  394. [ 0.179809] pci 0000:00:04.0: bridge window [mem 0xfa100000-0xfa1fffff 64bit pref]
  395. [ 0.179816] pci 0000:00:07.0: PCI bridge to [bus 03]
  396. [ 0.179820] pci 0000:00:07.0: bridge window [mem 0xfe100000-0xfe1fffff]
  397. [ 0.179826] pci 0000:00:14.4: PCI bridge to [bus 04]
  398. [ 0.179850] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
  399. [ 0.179852] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
  400. [ 0.179853] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
  401. [ 0.179854] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
  402. [ 0.179855] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
  403. [ 0.179857] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
  404. [ 0.179858] pci_bus 0000:00: resource 10 [mem 0xf0000000-0xffffffff window]
  405. [ 0.179860] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
  406. [ 0.179861] pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe0fffff]
  407. [ 0.179862] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf9ffffff 64bit pref]
  408. [ 0.179864] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
  409. [ 0.179865] pci_bus 0000:02: resource 1 [mem 0xfe200000-0xfe2fffff]
  410. [ 0.179866] pci_bus 0000:02: resource 2 [mem 0xfa100000-0xfa1fffff 64bit pref]
  411. [ 0.179867] pci_bus 0000:03: resource 1 [mem 0xfe100000-0xfe1fffff]
  412. [ 0.179869] pci_bus 0000:04: resource 4 [io 0x0000-0x03af window]
  413. [ 0.179870] pci_bus 0000:04: resource 5 [io 0x03e0-0x0cf7 window]
  414. [ 0.179871] pci_bus 0000:04: resource 6 [io 0x03b0-0x03df window]
  415. [ 0.179872] pci_bus 0000:04: resource 7 [io 0x0d00-0xffff window]
  416. [ 0.179874] pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000bffff window]
  417. [ 0.179875] pci_bus 0000:04: resource 9 [mem 0x000c0000-0x000dffff window]
  418. [ 0.179876] pci_bus 0000:04: resource 10 [mem 0xf0000000-0xffffffff window]
  419. [ 0.179963] NET: Registered protocol family 2
  420. [ 0.180103] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
  421. [ 0.180206] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  422. [ 0.180397] TCP: Hash tables configured (established 65536 bind 65536)
  423. [ 0.180430] UDP hash table entries: 4096 (order: 5, 131072 bytes)
  424. [ 0.180459] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
  425. [ 0.180614] NET: Registered protocol family 1
  426. [ 0.181693] pci 0000:01:00.0: Video device with shadowed ROM
  427. [ 0.181821] PCI: CLS 64 bytes, default 64
  428. [ 0.181927] Trying to unpack rootfs image as initramfs...
  429. [ 0.867333] Freeing initrd memory: 7600K (ffff880037118000 - ffff880037884000)
  430. [ 0.867347] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
  431. [ 0.867351] software IO TLB [mem 0xcbeea000-0xcfeea000] (64MB) mapped at [ffff8800cbeea000-ffff8800cfee9fff]
  432. [ 0.867484] perf: AMD NB counters detected
  433. [ 0.867578] LVT offset 0 assigned for vector 0x400
  434. [ 0.867592] perf: AMD IBS detected (0x000000ff)
  435. [ 0.867812] futex hash table entries: 1024 (order: 4, 65536 bytes)
  436. [ 0.867860] audit: initializing netlink subsys (disabled)
  437. [ 0.867877] audit: type=2000 audit(1508256250.762:1): initialized
  438. [ 0.867979] Initialise system trusted keyring
  439. [ 0.868285] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  440. [ 0.868330] JFS: nTxBlock = 8192, nTxLock = 65536
  441. [ 0.869859] SGI XFS with ACLs, security attributes, realtime, no debug enabled
  442. [ 0.870237] aufs 4.5-20160328
  443. [ 0.871882] Key type asymmetric registered
  444. [ 0.871889] Asymmetric key parser 'x509' registered
  445. [ 0.871925] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  446. [ 0.871932] io scheduler noop registered
  447. [ 0.871936] io scheduler deadline registered (default)
  448. [ 0.871940] start plist test
  449. [ 0.873944] end plist test
  450. [ 0.873947] Running rhashtable test nelem=8, max_size=0, shrinking=0
  451. [ 0.873950] Test 00:
  452. [ 0.876918] Adding 50000 keys
  453. [ 0.891033] Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
  454. [ 0.900215] Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
  455. [ 0.900225] Deleting 50000 keys
  456. [ 0.907669] Duration of test: 30731070 ns
  457. [ 0.907695] Test 01:
  458. [ 0.911290] Adding 50000 keys
  459. [ 0.923168] Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
  460. [ 0.927356] Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
  461. [ 0.927361] Deleting 50000 keys
  462. [ 0.930652] Duration of test: 19308669 ns
  463. [ 0.930671] Test 02:
  464. [ 0.933441] Adding 50000 keys
  465. [ 0.949998] Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
  466. [ 0.954158] Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
  467. [ 0.954163] Deleting 50000 keys
  468. [ 0.957483] Duration of test: 23991247 ns
  469. [ 0.957500] Test 03:
  470. [ 0.960302] Adding 50000 keys
  471. [ 0.967902] Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
  472. [ 0.972053] Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
  473. [ 0.972058] Deleting 50000 keys
  474. [ 0.975375] Duration of test: 15022579 ns
  475. [ 0.975393] Average test time: 22263391
  476. [ 0.975396] Testing concurrent rhashtable access from 10 threads
  477. [ 1.490474] Started 10 threads, 0 failed
  478. [ 1.490932] glob: 64 self-tests passed, 0 failed
  479. [ 1.491282] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
  480. [ 1.491286] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
  481. [ 1.491290] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
  482. [ 1.491294] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
  483. [ 1.491306] pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt
  484. [ 1.491310] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
  485. [ 1.491314] pcie_pme 0000:00:04.0:pcie01: service driver pcie_pme loaded
  486. [ 1.491325] pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt
  487. [ 1.491329] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
  488. [ 1.491333] pcie_pme 0000:00:07.0:pcie01: service driver pcie_pme loaded
  489. [ 1.491449] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  490. [ 1.511979] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
  491. [ 1.512443] Linux agpgart interface v0.103
  492. [ 1.512610] efifb: probing for efifb
  493. [ 1.512620] efifb: framebuffer at 0xf9000000, mapped to 0xffffc90001c00000, using 3072k, total 3072k
  494. [ 1.512625] efifb: mode is 1024x768x32, linelength=4096, pages=1
  495. [ 1.512628] efifb: scrolling: redraw
  496. [ 1.512631] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
  497. [ 1.514221] Console: switching to colour frame buffer device 128x48
  498. [ 1.515587] fb0: EFI VGA frame buffer device
  499. [ 1.515641] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
  500. [ 1.515666] ACPI: Power Button [PWRB]
  501. [ 1.515706] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
  502. [ 1.515785] ACPI: Power Button [PWRF]
  503. [ 1.515844] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
  504. [ 1.515890] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
  505. [ 1.516005] acpi device:04: registered as cooling_device0
  506. [ 1.516056] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:03/LNXVIDEO:01/input/input2
  507. [ 1.516134] xenfs: not registering filesystem on non-xen platform
  508. [ 1.518634] brd: module loaded
  509. [ 1.520169] loop: module loaded
  510. [ 1.520429] usbcore: registered new interface driver hwa-rc
  511. [ 1.520480] usbcore: registered new interface driver i1480-dfu-usb
  512. [ 1.520573] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  513. [ 1.520616] ehci-pci: EHCI PCI platform driver
  514. [ 1.520908] QUIRK: Enable AMD PLL fix
  515. [ 1.520939] ehci-pci 0000:00:12.2: EHCI Host Controller
  516. [ 1.520981] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
  517. [ 1.522315] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
  518. [ 1.523655] ehci-pci 0000:00:12.2: debug port 1
  519. [ 1.524980] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe30b000
  520. [ 1.531852] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
  521. [ 1.533504] hub 1-0:1.0: USB hub found
  522. [ 1.534819] hub 1-0:1.0: 5 ports detected
  523. [ 1.536509] ehci-pci 0000:00:13.2: EHCI Host Controller
  524. [ 1.537815] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
  525. [ 1.539115] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
  526. [ 1.540453] ehci-pci 0000:00:13.2: debug port 1
  527. [ 1.541789] ehci-pci 0000:00:13.2: irq 17, io mem 0xfe309000
  528. [ 1.548853] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
  529. [ 1.550467] hub 2-0:1.0: USB hub found
  530. [ 1.551751] hub 2-0:1.0: 5 ports detected
  531. [ 1.553205] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  532. [ 1.554479] uhci_hcd: USB Universal Host Controller Interface driver
  533. [ 1.555970] xhci_hcd 0000:00:10.0: xHCI Host Controller
  534. [ 1.557231] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
  535. [ 1.558696] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000418
  536. [ 1.560349] hub 3-0:1.0: USB hub found
  537. [ 1.561629] hub 3-0:1.0: 2 ports detected
  538. [ 1.562971] xhci_hcd 0000:00:10.0: xHCI Host Controller
  539. [ 1.564234] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
  540. [ 1.565516] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
  541. [ 1.567047] hub 4-0:1.0: USB hub found
  542. [ 1.568314] hub 4-0:1.0: 2 ports detected
  543. [ 1.569833] xhci_hcd 0000:00:10.1: xHCI Host Controller
  544. [ 1.571071] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 5
  545. [ 1.572483] xhci_hcd 0000:00:10.1: hcc params 0x014040c3 hci version 0x100 quirks 0x00000418
  546. [ 1.574113] hub 5-0:1.0: USB hub found
  547. [ 1.575346] hub 5-0:1.0: 2 ports detected
  548. [ 1.576674] xhci_hcd 0000:00:10.1: xHCI Host Controller
  549. [ 1.577823] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 6
  550. [ 1.578983] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
  551. [ 1.580402] hub 6-0:1.0: USB hub found
  552. [ 1.581559] hub 6-0:1.0: 2 ports detected
  553. [ 1.582893] xhci_hcd 0000:03:00.0: xHCI Host Controller
  554. [ 1.584028] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 7
  555. [ 1.585308] xhci_hcd 0000:03:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x00000090
  556. [ 1.586831] hub 7-0:1.0: USB hub found
  557. [ 1.587999] hub 7-0:1.0: 1 port detected
  558. [ 1.589277] xhci_hcd 0000:03:00.0: xHCI Host Controller
  559. [ 1.590511] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 8
  560. [ 1.591719] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
  561. [ 1.593115] hub 8-0:1.0: USB hub found
  562. [ 1.594357] hub 8-0:1.0: 4 ports detected
  563. [ 1.595881] usbcore: registered new interface driver wusb-cbaf
  564. [ 1.596453] usbcore: registered new interface driver cdc_wdm
  565. [ 1.597100] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
  566. [ 1.597645] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
  567. [ 1.598402] serio: i8042 KBD port at 0x60,0x64 irq 1
  568. [ 1.599172] mousedev: PS/2 mouse device common for all mice
  569. [ 1.599923] usbcore: registered new interface driver appletouch
  570. [ 1.600498] usbcore: registered new interface driver bcm5974
  571. [ 1.601185] usbcore: registered new interface driver synaptics_usb
  572. [ 1.601805] rtc_cmos 00:07: RTC can wake from S4
  573. [ 1.602569] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
  574. [ 1.603201] rtc_cmos 00:07: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
  575. [ 1.603796] EFI Variables Facility v0.08 2004-May-17
  576. [ 1.610618] hidraw: raw HID events driver (C) Jiri Kosina
  577. [ 1.611325] usbcore: registered new interface driver usbhid
  578. [ 1.611918] usbhid: USB HID core driver
  579. [ 1.612583] ashmem: initialized
  580. [ 1.613528] NET: Registered protocol family 17
  581. [ 1.614549] microcode: CPU0: patch_level=0x06001119
  582. [ 1.615207] microcode: CPU1: patch_level=0x06001119
  583. [ 1.615959] microcode: CPU2: patch_level=0x06001119
  584. [ 1.617089] microcode: CPU3: patch_level=0x06001119
  585. [ 1.618276] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
  586. [ 1.618974] registered taskstats version 1
  587. [ 1.619506] Loading compiled-in X.509 certificates
  588. [ 1.620833] Loaded X.509 cert 'Build time autogenerated kernel key: ff9815eedf456a416b47a550185c308db238d969'
  589. [ 1.629473] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
  590. [ 1.644713] Key type encrypted registered
  591. [ 1.646377] rtc_cmos 00:07: setting system clock to 2017-10-17 16:04:12 UTC (1508256252)
  592. [ 1.649339] Freeing unused kernel memory: 1016K (ffffffffa3a7a000 - ffffffffa3b78000)
  593. [ 1.650608] Write protecting the kernel read-only data: 10240k
  594. [ 1.652307] Freeing unused kernel memory: 776K (ffff88002353e000 - ffff880023600000)
  595. [ 1.659460] Freeing unused kernel memory: 1384K (ffff8800238a6000 - ffff880023a00000)
  596. [ 1.837772] usb 1-1: new high-speed USB device number 2 using ehci-pci
  597. [ 1.867765] tsc: Refined TSC clocksource calibration: 4092.738 MHz
  598. [ 1.867769] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3afe922a5c9, max_idle_ns: 440795234780 ns
  599. [ 1.892783] usb 7-1: new high-speed USB device number 2 using xhci_hcd
  600. [ 2.008592] hub 7-1:1.0: USB hub found
  601. [ 2.008697] hub 7-1:1.0: 4 ports detected
  602. [ 2.244903] ahci 0000:00:11.0: version 3.0
  603. [ 2.245108] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x87 impl SATA mode
  604. [ 2.245110] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
  605. [ 2.246815] scsi host0: ahci
  606. [ 2.247023] scsi host1: ahci
  607. [ 2.247263] scsi host2: ahci
  608. [ 2.247410] scsi host3: ahci
  609. [ 2.247683] scsi host4: ahci
  610. [ 2.247854] scsi host5: ahci
  611. [ 2.248010] scsi host6: ahci
  612. [ 2.248176] scsi host7: ahci
  613. [ 2.248286] ata1: SATA max UDMA/133 abar m2048@0xfe30d000 port 0xfe30d100 irq 38
  614. [ 2.248291] ata2: SATA max UDMA/133 abar m2048@0xfe30d000 port 0xfe30d180 irq 38
  615. [ 2.248295] ata3: SATA max UDMA/133 abar m2048@0xfe30d000 port 0xfe30d200 irq 38
  616. [ 2.248298] ata4: DUMMY
  617. [ 2.248299] ata5: DUMMY
  618. [ 2.248301] ata6: DUMMY
  619. [ 2.248304] ata7: DUMMY
  620. [ 2.248309] ata8: SATA max UDMA/133 abar m2048@0xfe30d000 port 0xfe30d480 irq 38
  621. [ 2.278849] usb 7-1.3: new high-speed USB device number 3 using xhci_hcd
  622. [ 2.418793] usb 7-1.4: new high-speed USB device number 4 using xhci_hcd
  623. [ 2.552009] ata8: SATA link down (SStatus 0 SControl 300)
  624. [ 2.704885] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  625. [ 2.704913] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  626. [ 2.704936] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  627. [ 2.706684] ata3.00: ATA-8: ST3500320AS, SD1A, max UDMA/133
  628. [ 2.706687] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
  629. [ 2.708792] ata3.00: configured for UDMA/133
  630. [ 2.721638] ata1.00: ATA-8: KINGSTON SV300S37A120G, 521ABBF0, max UDMA/133
  631. [ 2.721643] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
  632. [ 2.731967] ata2.00: ATA-8: ST31000528AS, CC34, max UDMA/133
  633. [ 2.731973] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
  634. [ 2.741434] ata1.00: configured for UDMA/133
  635. [ 2.741676] scsi 0:0:0:0: Direct-Access ATA KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5
  636. [ 2.755194] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
  637. [ 2.755246] sd 0:0:0:0: [sda] Write Protect is off
  638. [ 2.755249] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  639. [ 2.755269] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  640. [ 2.756273] sda: sda1 sda2 sda3 sda4
  641. [ 2.756588] sd 0:0:0:0: [sda] Attached SCSI disk
  642. [ 2.771676] ata2.00: configured for UDMA/133
  643. [ 2.771933] scsi 1:0:0:0: Direct-Access ATA ST31000528AS CC34 PQ: 0 ANSI: 5
  644. [ 2.784068] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
  645. [ 2.784165] sd 1:0:0:0: [sdb] Write Protect is off
  646. [ 2.784170] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
  647. [ 2.784194] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  648. [ 2.784506] scsi 2:0:0:0: Direct-Access ATA ST3500320AS SD1A PQ: 0 ANSI: 5
  649. [ 2.793730] sdb: sdb1
  650. [ 2.793933] sd 1:0:0:0: [sdb] Attached SCSI disk
  651. [ 2.800088] sd 2:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
  652. [ 2.800148] sd 2:0:0:0: [sdc] Write Protect is off
  653. [ 2.800153] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
  654. [ 2.800178] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  655. [ 2.805869] sdc: sdc1
  656. [ 2.806197] sd 2:0:0:0: [sdc] Attached SCSI disk
  657. [ 2.840019] sd 0:0:0:0: Attached scsi generic sg0 type 0
  658. [ 2.840057] sd 1:0:0:0: Attached scsi generic sg1 type 0
  659. [ 2.840097] sd 2:0:0:0: Attached scsi generic sg2 type 0
  660. [ 2.867843] clocksource: Switched to clocksource tsc
  661. [ 2.920423] scsi: <fdomain> Detection failed (no card)
  662. [ 2.937354] GDT-HA: Storage RAID Controller Driver. Version: 3.05
  663. [ 3.080783] Fusion MPT base driver 3.04.20
  664. [ 3.080785] Copyright (c) 1999-2008 LSI Corporation
  665. [ 3.089289] Fusion MPT SPI Host driver 3.04.20
  666. [ 3.096605] Fusion MPT FC Host driver 3.04.20
  667. [ 3.101688] Fusion MPT SAS Host driver 3.04.20
  668. [ 3.106038] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
  669. [ 3.110311] 3ware Storage Controller device driver for Linux v1.26.02.003.
  670. [ 3.113415] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
  671. [ 3.128649] HP CISS Driver (v 3.6.26)
  672. [ 3.143562] Adaptec aacraid driver 1.2-1[41010]-ms
  673. [ 3.151245] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
  674. [ 3.152408] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
  675. [ 3.157506] megasas: 06.808.16.00-rc1
  676. [ 3.165869] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.26-k.
  677. [ 3.174078] Emulex LightPulse Fibre Channel SCSI driver 11.0.0.10.
  678. [ 3.174080] Copyright(c) 2004-2015 Emulex. All rights reserved.
  679. [ 3.180984] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
  680. [ 3.223034] usb-storage 1-1:1.0: USB Mass Storage device detected
  681. [ 3.223125] scsi host8: usb-storage 1-1:1.0
  682. [ 3.223201] usb-storage 7-1.3:1.0: USB Mass Storage device detected
  683. [ 3.223278] scsi host9: usb-storage 7-1.3:1.0
  684. [ 3.223342] usb-storage 7-1.4:1.0: USB Mass Storage device detected
  685. [ 3.223387] scsi host10: usb-storage 7-1.4:1.0
  686. [ 3.223450] usbcore: registered new interface driver usb-storage
  687. [ 3.403519] device-mapper: uevent: version 1.0.3
  688. [ 3.403573] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
  689. [ 3.459844] raid6: sse2x1 gen() 3433 MB/s
  690. [ 3.476850] raid6: sse2x1 xor() 2500 MB/s
  691. [ 3.493841] raid6: sse2x2 gen() 5191 MB/s
  692. [ 3.510804] raid6: sse2x2 xor() 3728 MB/s
  693. [ 3.527802] raid6: sse2x4 gen() 6550 MB/s
  694. [ 3.544850] raid6: sse2x4 xor() 3910 MB/s
  695. [ 3.544852] raid6: using algorithm sse2x4 gen() 6550 MB/s
  696. [ 3.544854] raid6: .... xor() 3910 MB/s, rmw enabled
  697. [ 3.544856] raid6: using ssse3x2 recovery algorithm
  698. [ 3.546644] xor: automatically using best checksumming function:
  699. [ 3.555844] avx : 2376.000 MB/sec
  700. [ 3.557530] async_tx: api initialized (async)
  701. [ 3.567820] md: raid6 personality registered for level 6
  702. [ 3.567824] md: raid5 personality registered for level 5
  703. [ 3.567827] md: raid4 personality registered for level 4
  704. [ 3.569859] device-mapper: raid: Loading target version 1.7.0
  705. [ 3.574834] md: raid0 personality registered for level 0
  706. [ 3.577887] md: raid1 personality registered for level 1
  707. [ 3.601474] md: raid10 personality registered for level 10
  708. [ 3.604673] md: linear personality registered for level -1
  709. [ 3.609323] md: multipath personality registered for level -4
  710. [ 3.645543] Btrfs loaded, assert=on
  711. [ 3.645557] BTRFS: selftest: Running btrfs free space cache tests
  712. [ 3.645566] BTRFS: selftest: Running extent only tests
  713. [ 3.645572] BTRFS: selftest: Running bitmap only tests
  714. [ 3.645579] BTRFS: selftest: Running bitmap and extent tests
  715. [ 3.645587] BTRFS: selftest: Running space stealing from bitmap to extent
  716. [ 3.645743] BTRFS: selftest: Free space cache tests finished
  717. [ 3.645744] BTRFS: selftest: Running extent buffer operation tests
  718. [ 3.645745] BTRFS: selftest: Running btrfs_split_item tests
  719. [ 3.645757] BTRFS: selftest: Running extent I/O tests
  720. [ 3.645758] BTRFS: selftest: Running find delalloc tests
  721. [ 3.687440] BTRFS: selftest: Running extent buffer bitmap tests
  722. [ 3.691075] BTRFS: selftest: Extent I/O tests finished
  723. [ 3.691076] BTRFS: selftest: Running btrfs_get_extent tests
  724. [ 3.691116] BTRFS: selftest: Running hole first btrfs_get_extent test
  725. [ 3.691122] BTRFS: selftest: Running outstanding_extents tests
  726. [ 3.691136] BTRFS: selftest: Running qgroup tests
  727. [ 3.691137] BTRFS: selftest: Qgroup basic add
  728. [ 3.691150] BTRFS: selftest: Qgroup multiple refs test
  729. [ 3.691170] BTRFS: selftest: Running free space tree tests
  730. [ 3.747969] RPC: Registered named UNIX socket transport module.
  731. [ 3.747975] RPC: Registered udp transport module.
  732. [ 3.747977] RPC: Registered tcp transport module.
  733. [ 3.747979] RPC: Registered tcp NFSv4.1 backchannel transport module.
  734. [ 3.774437] zavl: module license 'CDDL' taints kernel.
  735. [ 3.774440] Disabling lock debugging due to kernel taint
  736. [ 3.774470] zavl: module verification failed: signature and/or required key missing - tainting kernel
  737. [ 3.776261] SPL: Loaded module v0.6.5-63_g5ad98ad
  738. [ 4.224397] scsi 9:0:0:0: Direct-Access ST3000DM 001-1CH166 PQ: 0 ANSI: 5
  739. [ 4.224535] scsi 8:0:0:0: Direct-Access Kingston DataTraveler 3.0 PQ: 0 ANSI: 6
  740. [ 4.224672] scsi 9:0:0:1: Direct-Access ST3000DM 001-1CH166 PQ: 0 ANSI: 5
  741. [ 4.224946] scsi 9:0:0:2: Direct-Access ST3000DM 001-1CH166 PQ: 0 ANSI: 5
  742. [ 4.225208] scsi 9:0:0:3: Direct-Access WDC WD30 EZRX-00D8PB0 PQ: 0 ANSI: 5
  743. [ 4.225512] scsi 9:0:0:4: Direct-Access ST3000DM 001-1ER166 PQ: 0 ANSI: 5
  744. [ 4.225808] scsi 9:0:0:5: Direct-Access WDC WD30 EZRZ-00Z5HB0 PQ: 0 ANSI: 5
  745. [ 4.226091] scsi 9:0:0:6: Direct-Access ST4000DM 005-2DP166 PQ: 0 ANSI: 5
  746. [ 4.248202] scsi 10:0:0:0: Direct-Access WDC WD20 EARX-00PASB0 PQ: 0 ANSI: 5
  747. [ 4.254512] scsi 10:0:0:1: Direct-Access WDC WD20 EARX-00PASB0 PQ: 0 ANSI: 5
  748. [ 4.255419] scsi 10:0:0:2: Direct-Access ST2000DM 001-1CH164 PQ: 0 ANSI: 5
  749. [ 4.256345] scsi 10:0:0:3: Direct-Access ST2000DM 001-1CH164 PQ: 0 ANSI: 5
  750. [ 4.299902] sd 9:0:0:0: Attached scsi generic sg3 type 0
  751. [ 4.300009] sd 9:0:0:0: [sdd] Very big device. Trying to use READ CAPACITY(16).
  752. [ 4.300192] sd 9:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
  753. [ 4.300200] sd 9:0:0:1: Attached scsi generic sg4 type 0
  754. [ 4.300532] sd 9:0:0:2: Attached scsi generic sg5 type 0
  755. [ 4.300866] sd 9:0:0:3: Attached scsi generic sg6 type 0
  756. [ 4.301170] sd 9:0:0:4: Attached scsi generic sg7 type 0
  757. [ 4.301468] sd 9:0:0:5: Attached scsi generic sg8 type 0
  758. [ 4.301614] sd 9:0:0:0: [sdd] Write Protect is off
  759. [ 4.301618] sd 9:0:0:0: [sdd] Mode Sense: 28 00 00 00
  760. [ 4.301790] sd 9:0:0:1: [sde] Very big device. Trying to use READ CAPACITY(16).
  761. [ 4.301827] sd 9:0:0:6: Attached scsi generic sg9 type 0
  762. [ 4.302616] sd 9:0:0:0: [sdd] No Caching mode page found
  763. [ 4.302621] sd 9:0:0:0: [sdd] Assuming drive cache: write through
  764. [ 4.302839] sd 8:0:0:0: Attached scsi generic sg10 type 0
  765. [ 4.303065] sd 9:0:0:1: [sde] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
  766. [ 4.303204] sd 9:0:0:2: [sdf] Very big device. Trying to use READ CAPACITY(16).
  767. [ 4.303222] sd 10:0:0:0: Attached scsi generic sg11 type 0
  768. [ 4.303344] sd 9:0:0:3: [sdg] Very big device. Trying to use READ CAPACITY(16).
  769. [ 4.303502] sd 9:0:0:4: [sdh] Very big device. Trying to use READ CAPACITY(16).
  770. [ 4.303535] sd 10:0:0:1: Attached scsi generic sg12 type 0
  771. [ 4.303652] sd 9:0:0:5: [sdi] Very big device. Trying to use READ CAPACITY(16).
  772. [ 4.303823] sd 10:0:0:2: Attached scsi generic sg13 type 0
  773. [ 4.304155] sd 9:0:0:6: [sdj] Very big device. Trying to use READ CAPACITY(16).
  774. [ 4.304194] sd 10:0:0:3: Attached scsi generic sg14 type 0
  775. [ 4.305519] sd 8:0:0:0: [sdk] 15109516 512-byte logical blocks: (7.74 GB/7.20 GiB)
  776. [ 4.305757] sd 9:0:0:1: [sde] Write Protect is off
  777. [ 4.305760] sd 9:0:0:1: [sde] Mode Sense: 28 00 00 00
  778. [ 4.306016] sd 9:0:0:2: [sdf] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
  779. [ 4.306140] sd 8:0:0:0: [sdk] Write Protect is off
  780. [ 4.306142] sd 8:0:0:0: [sdk] Mode Sense: 4f 00 00 00
  781. [ 4.306199] sd 9:0:0:3: [sdg] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
  782. [ 4.306399] sd 9:0:0:4: [sdh] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
  783. [ 4.306582] sd 9:0:0:5: [sdi] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
  784. [ 4.306711] sd 9:0:0:0: [sdd] Very big device. Trying to use READ CAPACITY(16).
  785. [ 4.306761] sd 8:0:0:0: [sdk] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
  786. [ 4.306892] sd 9:0:0:6: [sdj] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
  787. [ 4.307320] sd 9:0:0:1: [sde] No Caching mode page found
  788. [ 4.307323] sd 9:0:0:1: [sde] Assuming drive cache: write through
  789. [ 4.307779] sd 9:0:0:2: [sdf] Write Protect is off
  790. [ 4.307781] sd 9:0:0:2: [sdf] Mode Sense: 28 00 00 00
  791. [ 4.308226] sd 9:0:0:3: [sdg] Write Protect is off
  792. [ 4.308228] sd 9:0:0:3: [sdg] Mode Sense: 28 00 00 00
  793. [ 4.308676] sd 9:0:0:4: [sdh] Write Protect is off
  794. [ 4.308678] sd 9:0:0:4: [sdh] Mode Sense: 28 00 00 00
  795. [ 4.309140] sd 9:0:0:5: [sdi] Write Protect is off
  796. [ 4.309142] sd 9:0:0:5: [sdi] Mode Sense: 28 00 00 00
  797. [ 4.309765] sd 9:0:0:6: [sdj] Write Protect is off
  798. [ 4.309767] sd 9:0:0:6: [sdj] Mode Sense: 28 00 00 00
  799. [ 4.310061] sd 10:0:0:0: [sdl] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
  800. [ 4.310444] sd 9:0:0:2: [sdf] No Caching mode page found
  801. [ 4.310446] sd 9:0:0:2: [sdf] Assuming drive cache: write through
  802. [ 4.310983] sd 9:0:0:3: [sdg] No Caching mode page found
  803. [ 4.310986] sd 9:0:0:3: [sdg] Assuming drive cache: write through
  804. [ 4.311154] sdk: sdk1 sdk2 sdk3
  805. [ 4.311241] sd 10:0:0:0: [sdl] Write Protect is off
  806. [ 4.311243] sd 10:0:0:0: [sdl] Mode Sense: 3c 00 00 00
  807. [ 4.311598] sd 9:0:0:4: [sdh] No Caching mode page found
  808. [ 4.311601] sd 9:0:0:4: [sdh] Assuming drive cache: write through
  809. [ 4.312041] sd 9:0:0:5: [sdi] No Caching mode page found
  810. [ 4.312044] sd 9:0:0:5: [sdi] Assuming drive cache: write through
  811. [ 4.312975] sd 9:0:0:6: [sdj] No Caching mode page found
  812. [ 4.312977] sd 9:0:0:6: [sdj] Assuming drive cache: write through
  813. [ 4.313148] sd 9:0:0:1: [sde] Very big device. Trying to use READ CAPACITY(16).
  814. [ 4.313386] sd 8:0:0:0: [sdk] Attached SCSI removable disk
  815. [ 4.314405] sd 9:0:0:2: [sdf] Very big device. Trying to use READ CAPACITY(16).
  816. [ 4.314481] sd 9:0:0:3: [sdg] Very big device. Trying to use READ CAPACITY(16).
  817. [ 4.314617] sd 9:0:0:4: [sdh] Very big device. Trying to use READ CAPACITY(16).
  818. [ 4.314765] sd 9:0:0:5: [sdi] Very big device. Trying to use READ CAPACITY(16).
  819. [ 4.317452] sd 10:0:0:1: [sdm] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
  820. [ 4.317930] sd 10:0:0:2: [sdn] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
  821. [ 4.318453] sd 10:0:0:3: [sdo] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
  822. [ 4.318913] sd 10:0:0:0: [sdl] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
  823. [ 4.319419] sd 10:0:0:1: [sdm] Write Protect is off
  824. [ 4.319421] sd 10:0:0:1: [sdm] Mode Sense: 3c 00 00 00
  825. [ 4.319918] sd 10:0:0:2: [sdn] Write Protect is off
  826. [ 4.319921] sd 10:0:0:2: [sdn] Mode Sense: 3c 00 00 00
  827. [ 4.320408] sd 10:0:0:3: [sdo] Write Protect is off
  828. [ 4.320410] sd 10:0:0:3: [sdo] Mode Sense: 3c 00 00 00
  829. [ 4.320977] sd 10:0:0:1: [sdm] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
  830. [ 4.321469] sd 10:0:0:2: [sdn] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
  831. [ 4.321938] sd 10:0:0:3: [sdo] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
  832. [ 4.337974] sdl: sdl1
  833. [ 4.339779] sdm: sdm1
  834. [ 4.340100] sdn: sdn1
  835. [ 4.340417] sdo: sdo1
  836. [ 4.355191] sd 10:0:0:0: [sdl] Attached SCSI disk
  837. [ 4.357148] sd 10:0:0:1: [sdm] Attached SCSI disk
  838. [ 4.357642] sd 10:0:0:2: [sdn] Attached SCSI disk
  839. [ 4.358129] sd 10:0:0:3: [sdo] Attached SCSI disk
  840. [ 5.049251] ZFS: Loaded module v0.6.5-329_g5c27b29, ZFS pool version 5000, ZFS filesystem version 5
  841. [ 5.055836] fuse init (API version 7.24)
  842. [ 5.072245] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
  843. [ 5.072249] e1000: Copyright (c) 1999-2006 Intel Corporation.
  844. [ 5.075765] dca service started, version 1.12.1
  845. [ 5.077898] pps_core: LinuxPPS API ver. 1 registered
  846. [ 5.077903] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  847. [ 5.078916] PTP clock support registered
  848. [ 5.081058] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
  849. [ 5.081060] igb: Copyright (c) 2007-2014 Intel Corporation.
  850. [ 5.087438] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
  851. [ 5.092995] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
  852. [ 5.093643] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90002916000, 74:d4:35:08:80:c0, XID 0c900800 IRQ 39
  853. [ 5.093649] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
  854. [ 5.098947] sky2: driver version 1.30
  855. [ 5.116780] VMware vmxnet3 virtual NIC driver - version 1.4.6.0-k-NAPI
  856. [ 5.126046] Loading iSCSI transport class v2.0-870.
  857. [ 5.137330] iscsi: registered transport (tcp)
  858. [ 5.178329] AVX version of gcm_enc/dec engaged.
  859. [ 5.178332] AES CTR mode by8 optimization enabled
  860. [ 5.368122] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
  861. [ 5.371735] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
  862. [ 5.406282] EXT4-fs (sda4): couldn't mount as ext3 due to feature incompatibilities
  863. [ 5.406358] EXT4-fs (sda4): couldn't mount as ext2 due to feature incompatibilities
  864. [ 5.412981] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
  865. [ 5.440554] EXT4-fs (sdb1): mounting ext3 file system using the ext4 subsystem
  866. [ 5.480865] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
  867. [ 5.507645] EXT4-fs (sdc1): mounting ext3 file system using the ext4 subsystem
  868. [ 5.522004] random: nonblocking pool is initialized
  869. [ 5.550791] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
  870. [ 6.109725] sd 9:0:0:6: [sdj] Very big device. Trying to use READ CAPACITY(16).
  871. [ 7.969309] sdf: sdf1 sdf2
  872. [ 7.970234] sdd: sdd1 sdd2
  873. [ 7.970814] sdh: sdh1 sdh2
  874. [ 7.971077] sde: sde1 sde2
  875. [ 7.971426] sdi: sdi1 sdi2
  876. [ 7.972080] sdg: sdg1 sdg2
  877. [ 7.972784] sdj: sdj1
  878. [ 7.973178] sd 9:0:0:2: [sdf] Very big device. Trying to use READ CAPACITY(16).
  879. [ 7.973493] sd 9:0:0:0: [sdd] Very big device. Trying to use READ CAPACITY(16).
  880. [ 7.973706] sd 9:0:0:4: [sdh] Very big device. Trying to use READ CAPACITY(16).
  881. [ 7.974110] sd 9:0:0:1: [sde] Very big device. Trying to use READ CAPACITY(16).
  882. [ 7.974243] sd 9:0:0:5: [sdi] Very big device. Trying to use READ CAPACITY(16).
  883. [ 7.974825] sd 9:0:0:3: [sdg] Very big device. Trying to use READ CAPACITY(16).
  884. [ 7.976210] sd 9:0:0:6: [sdj] Very big device. Trying to use READ CAPACITY(16).
  885. [ 7.977265] sd 9:0:0:2: [sdf] Attached SCSI disk
  886. [ 7.978577] sd 9:0:0:0: [sdd] Attached SCSI disk
  887. [ 7.979224] sd 9:0:0:4: [sdh] Attached SCSI disk
  888. [ 7.980143] sd 9:0:0:1: [sde] Attached SCSI disk
  889. [ 7.980576] sd 9:0:0:5: [sdi] Attached SCSI disk
  890. [ 7.981801] sd 9:0:0:3: [sdg] Attached SCSI disk
  891. [ 38.933512] usb 7-1.3: reset high-speed USB device number 3 using xhci_hcd
  892. [ 39.304280] sd 9:0:0:6: [sdj] Attached SCSI disk
  893. [ 40.497674] ISO 9660 Extensions: Microsoft Joliet Level 3
  894. [ 40.499061] ISO 9660 Extensions: RRIP_1991A
  895. [ 40.503614] aufs aufs_fill_super:955:mount[3721]: aufs_dop_noreval
  896. [ 40.531815] aufs test_add:283:mount[3733]: uid/gid/perm /mnt/livecd 0/0/0755, 0/0/01777
  897. [ 45.729198] ACPI: acpi_idle registered with cpuidle
  898. [ 45.747550] ohci-pci: OHCI PCI platform driver
  899. [ 45.747703] ohci-pci 0000:00:12.0: OHCI PCI host controller
  900. [ 45.747710] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 9
  901. [ 45.747742] ohci-pci 0000:00:12.0: irq 18, io mem 0xfe30c000
  902. [ 45.768116] r8169 0000:02:00.0 enp2s0: renamed from eth0
  903. [ 45.803329] hub 9-0:1.0: USB hub found
  904. [ 45.803354] hub 9-0:1.0: 5 ports detected
  905. [ 45.803630] ohci-pci 0000:00:13.0: OHCI PCI host controller
  906. [ 45.803636] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 10
  907. [ 45.803656] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe30a000
  908. [ 45.804803] acpi-cpufreq: overriding BIOS provided _PSD data
  909. [ 45.859967] hub 10-0:1.0: USB hub found
  910. [ 45.859976] hub 10-0:1.0: 5 ports detected
  911. [ 45.860210] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
  912. [ 45.860323] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
  913. [ 45.860502] ohci-pci 0000:00:14.5: OHCI PCI host controller
  914. [ 45.860508] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 11
  915. [ 45.860527] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe308000
  916. [ 45.887220] [drm] Initialized drm 1.1.0 20060810
  917. [ 45.914876] hub 11-0:1.0: USB hub found
  918. [ 45.914920] hub 11-0:1.0: 2 ports detected
  919. [ 45.934616] snd_hda_intel 0000:01:00.1: Disabling MSI
  920. [ 45.934624] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
  921. [ 45.950425] wmi: Mapper loaded
  922. [ 45.966753] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
  923. [ 45.966756] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
  924. [ 45.966758] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
  925. [ 45.966759] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
  926. [ 45.966761] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
  927. [ 45.966762] snd_hda_codec_realtek hdaudioC0D0: inputs:
  928. [ 45.966764] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
  929. [ 45.966765] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
  930. [ 45.966766] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
  931. [ 45.981796] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
  932. [ 45.981852] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
  933. [ 45.981901] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
  934. [ 45.981950] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
  935. [ 45.982001] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
  936. [ 45.982050] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
  937. [ 45.982097] input: HD-Audio Generic Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
  938. [ 45.982144] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
  939. [ 46.069975] checking generic (f9000000 300000) vs hw (f0000000 8000000)
  940. [ 46.069978] checking generic (f9000000 300000) vs hw (f8000000 2000000)
  941. [ 46.069979] fb: switching to nouveaufb from EFI VGA
  942. [ 46.070012] Console: switching to colour dummy device 80x25
  943. [ 46.070180] nouveau 0000:01:00.0: NVIDIA GK208B (b060b0b1)
  944. [ 46.150052] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12
  945. [ 46.150110] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
  946. [ 46.159541] input: PC Speaker as /devices/platform/pcspkr/input/input14
  947. [ 46.183031] nouveau 0000:01:00.0: bios: version 80.28.a6.00.41
  948. [ 46.183607] nouveau 0000:01:00.0: fb: 1024 MiB DDR3
  949. [ 46.183610] nouveau 0000:01:00.0: priv: HUB0: 086014 ffffffff (1a70820c)
  950. [ 46.215642] usb 9-2: new full-speed USB device number 2 using ohci-pci
  951. [ 46.301641] kvm: Nested Virtualization enabled
  952. [ 46.301644] kvm: Nested Paging enabled
  953. [ 46.421668] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-2/input2
  954. [ 46.555800] input: Logitech M510 as /devices/pci0000:00/0000:00:12.0/usb9/9-2/9-2:1.2/0003:046D:C52B.0003/0003:046D:1025.0004/input/input15
  955. [ 46.556951] logitech-hidpp-device 0003:046D:1025.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M510] on usb-0000:00:12.0-2:1
  956. [ 46.566619] input: Logitech K350 as /devices/pci0000:00/0000:00:12.0/usb9/9-2/9-2:1.2/0003:046D:C52B.0003/0003:046D:200A.0005/input/input16
  957. [ 46.568770] logitech-hidpp-device 0003:046D:200A.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech K350] on usb-0000:00:12.0-2:2
  958. [ 46.850026] [TTM] Zone kernel: Available graphics memory: 4051750 kiB
  959. [ 46.850029] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
  960. [ 46.850030] [TTM] Initializing pool allocator
  961. [ 46.850035] [TTM] Initializing DMA pool allocator
  962. [ 46.850045] nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB
  963. [ 46.850047] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
  964. [ 46.850050] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
  965. [ 46.850052] nouveau 0000:01:00.0: DRM: DCB version 4.0
  966. [ 46.850054] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000f02 00020030
  967. [ 46.850056] nouveau 0000:01:00.0: DRM: DCB outp 01: 02011f62 00020010
  968. [ 46.850058] nouveau 0000:01:00.0: DRM: DCB outp 02: 02022f10 00000000
  969. [ 46.850059] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001031
  970. [ 46.850061] nouveau 0000:01:00.0: DRM: DCB conn 01: 00002161
  971. [ 46.850062] nouveau 0000:01:00.0: DRM: DCB conn 02: 00000200
  972. [ 46.854159] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  973. [ 46.854161] [drm] Driver supports precise vblank timestamp query.
  974. [ 46.908010] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
  975. [ 47.138443] nouveau 0000:01:00.0: DRM: allocated 1920x1080 fb: 0x60000, bo ffff88003747b400
  976. [ 47.138573] fbcon: nouveaufb (fb0) is primary device
  977. [ 47.374254] Console: switching to colour frame buffer device 240x67
  978. [ 47.377485] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
  979. [ 47.384718] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
  980. [ 50.685528] warning: process `hwsetup' used the deprecated sysctl system call with 1.23.
  981. [ 57.780552] r8169 0000:02:00.0 enp2s0: link down
  982. [ 57.780608] r8169 0000:02:00.0 enp2s0: link down
  983. [ 60.564735] r8169 0000:02:00.0 enp2s0: link up
  984. [ 60.609845] NET: Registered protocol family 10
  985. [ 92.151681] dhcpcd[6667]: segfault at 0 ip 000000000042001b sp 00007ffee83e9b10 error 4 in dhcpcd[400000+44000]
  986.