- > iw phy6 info
- Wiphy phy6
- max # scan SSIDs: 9
- max scan IEs length: 2304 bytes
- max # sched scan SSIDs: 0
- max # match sets: 0
- max # scan plans: 1
- max scan plan interval: -1
- max scan plan iterations: 0
- Retry short limit: 7
- Retry long limit: 4
- Coverage class: 0 (up to 0m)
- Supported Ciphers:
- * WEP40 (00-0f-ac:1)
- * WEP104 (00-0f-ac:5)
- * TKIP (00-0f-ac:2)
- * CCMP-128 (00-0f-ac:4)
- Available Antennas: TX 0 RX 0
- Supported interface modes:
- * IBSS
- * managed
- * AP
- * P2P-client
- * P2P-GO
- Band 1:
- Capabilities: 0x1963
- RX LDPC
- HT20/HT40
- Static SM Power Save
- RX HT20 SGI
- RX HT40 SGI
- RX STBC 1-stream
- Max AMSDU length: 7935 bytes
- DSSS/CCK HT40
- Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
- Minimum RX AMPDU time spacing: 16 usec (0x07)
- HT Max RX data rate: 952 Mbps
- HT TX/RX MCS rate indexes supported: 0-15
- Bitrates (non-HT):
- * 1.0 Mbps
- * 2.0 Mbps
- * 5.5 Mbps
- * 11.0 Mbps
- * 6.0 Mbps
- * 9.0 Mbps
- * 12.0 Mbps
- * 18.0 Mbps
- * 24.0 Mbps
- * 36.0 Mbps
- * 48.0 Mbps
- * 54.0 Mbps
- Frequencies:
- * 2412 MHz [1] (20.0 dBm)
- * 2417 MHz [2] (20.0 dBm)
- * 2422 MHz [3] (20.0 dBm)
- * 2427 MHz [4] (20.0 dBm)
- * 2432 MHz [5] (20.0 dBm)
- * 2437 MHz [6] (20.0 dBm)
- * 2442 MHz [7] (20.0 dBm)
- * 2447 MHz [8] (20.0 dBm)
- * 2452 MHz [9] (20.0 dBm)
- * 2457 MHz [10] (20.0 dBm)
- * 2462 MHz [11] (20.0 dBm)
- * 2467 MHz [12] (20.0 dBm) (no IR)
- * 2472 MHz [13] (20.0 dBm) (no IR)
- * 2484 MHz [14] (disabled)
- Band 2:
- Capabilities: 0x1863
- RX LDPC
- HT20/HT40
- Static SM Power Save
- RX HT20 SGI
- RX HT40 SGI
- No RX STBC
- Max AMSDU length: 7935 bytes
- DSSS/CCK HT40
- Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
- Minimum RX AMPDU time spacing: 16 usec (0x07)
- HT Max RX data rate: 952 Mbps
- HT TX/RX MCS rate indexes supported: 0-15
- Bitrates (non-HT):
- * 6.0 Mbps
- * 9.0 Mbps
- * 12.0 Mbps
- * 18.0 Mbps
- * 24.0 Mbps
- * 36.0 Mbps
- * 48.0 Mbps
- * 54.0 Mbps
- Frequencies:
- * 5180 MHz [36] (30.0 dBm)
- * 5200 MHz [40] (30.0 dBm)
- * 5220 MHz [44] (30.0 dBm)
- * 5240 MHz [48] (30.0 dBm)
- * 5260 MHz [52] (30.0 dBm) (no IR, radar detection)
- * 5280 MHz [56] (30.0 dBm) (no IR, radar detection)
- * 5300 MHz [60] (30.0 dBm) (no IR, radar detection)
- * 5320 MHz [64] (30.0 dBm) (no IR, radar detection)
- * 5500 MHz [100] (30.0 dBm) (no IR, radar detection)
- * 5520 MHz [104] (30.0 dBm) (no IR, radar detection)
- * 5540 MHz [108] (30.0 dBm) (no IR, radar detection)
- * 5560 MHz [112] (30.0 dBm) (no IR, radar detection)
- * 5580 MHz [116] (30.0 dBm) (no IR, radar detection)
- * 5600 MHz [120] (30.0 dBm) (no IR, radar detection)
- * 5620 MHz [124] (30.0 dBm) (no IR, radar detection)
- * 5640 MHz [128] (30.0 dBm) (no IR, radar detection)
- * 5660 MHz [132] (30.0 dBm) (no IR, radar detection)
- * 5680 MHz [136] (30.0 dBm) (no IR, radar detection)
- * 5700 MHz [140] (30.0 dBm) (no IR, radar detection)
- * 5720 MHz [144] (disabled)
- * 5745 MHz [149] (disabled)
- * 5765 MHz [153] (disabled)
- * 5785 MHz [157] (disabled)
- * 5805 MHz [161] (disabled)
- * 5825 MHz [165] (disabled)
- * 5845 MHz [169] (disabled)
- * 5865 MHz [173] (disabled)
- * 5885 MHz [177] (disabled)
- Supported commands:
- * new_interface
- * set_interface
- * new_key
- * start_ap
- * new_station
- * set_bss
- * join_ibss
- * set_pmksa
- * del_pmksa
- * flush_pmksa
- * remain_on_channel
- * frame
- * set_channel
- * connect
- * disconnect
- Supported TX frame types:
- * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
- * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
- * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
- * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
- * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
- * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
- Supported RX frame types:
- * IBSS: 0xd0
- * managed: 0x40 0xd0
- * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
- * AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
- * P2P-client: 0x40 0xd0
- * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
- WoWLAN support:
- * wake up on anything (device continues operating normally)
- software interface modes (can always be added):
- interface combinations are not supported
- Device supports scan flush.