spacepaste

Paste details

reply | raw

  1.  
  2. [ 0.000000] Booting Linux on physical CPU 0x0
  3. [ 0.000000] Linux version 4.14.80-Re4son-v8+ (root@kali) (gcc version 8.2.0 (Debian 8.2.0-7)) #1 SMP PREEMPT Wed Nov 21 22:44:14 AEDT 2018
  4. [ 0.000000] Boot CPU: AArch64 Processor [410fd034]
  5. [ 0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2
  6. [ 0.000000] efi: Getting EFI parameters from FDT:
  7. [ 0.000000] efi: UEFI not found.
  8. [ 0.000000] cma: Reserved 8 MiB at 0x0000000037800000
  9. [ 0.000000] On node 0 totalpages: 229376
  10. [ 0.000000] DMA zone: 3584 pages used for memmap
  11. [ 0.000000] DMA zone: 0 pages reserved
  12. [ 0.000000] DMA zone: 229376 pages, LIFO batch:31
  13. [ 0.000000] random: get_random_bytes called from start_kernel+0x98/0x3e0 with crng_init=0
  14. [ 0.000000] percpu: Embedded 22 pages/cpu @ffffffccf7778000 s51864 r8192 d30056 u90112
  15. [ 0.000000] pcpu-alloc: s51864 r8192 d30056 u90112 alloc=22*4096
  16. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  17. [ 0.000000] Detected VIPT I-cache on CPU0
  18. [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
  19. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 225792
  20. [ 0.000000] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.fiq_fix_enable=2 console=ttyS0,115200 kgdboc=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait rootflags=noload net.ifnames=0
  21. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  22. [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
  23. [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
  24. [ 0.000000] Memory: 875032K/917504K available (7164K kernel code, 900K rwdata, 4168K rodata, 2752K init, 686K bss, 34280K reserved, 8192K cma-reserved)
  25. [ 0.000000] Virtual kernel memory layout:
  26. [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
  27. [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
  28. [ 0.000000] .text : 0xffffff8326680000 - 0xffffff8326d80000 ( 7168 KB)
  29. [ 0.000000] .rodata : 0xffffff8326d80000 - 0xffffff83271a0000 ( 4224 KB)
  30. [ 0.000000] .init : 0xffffff83271a0000 - 0xffffff8327450000 ( 2752 KB)
  31. [ 0.000000] .data : 0xffffff8327450000 - 0xffffff8327531200 ( 901 KB)
  32. [ 0.000000] .bss : 0xffffff8327531200 - 0xffffff83275dcc68 ( 687 KB)
  33. [ 0.000000] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB)
  34. [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
  35. [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
  36. [ 0.000000] 0xffffffbf33000000 - 0xffffffbf33e00000 ( 14 MB actual)
  37. [ 0.000000] memory : 0xffffffccc0000000 - 0xffffffccf8000000 ( 896 MB)
  38. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  39. [ 0.000000] ftrace: allocating 25832 entries in 101 pages
  40. [ 0.000000] Preemptible hierarchical RCU implementation.
  41. [ 0.000000] Tasks RCU enabled.
  42. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  43. [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
  44. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
  45. [ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
  46. [ 0.000232] Console: colour dummy device 80x25
  47. [ 0.001077] console [tty1] enabled
  48. [ 0.001112] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=19200)
  49. [ 0.001156] pid_max: default: 32768 minimum: 301
  50. [ 0.001504] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
  51. [ 0.001550] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
  52. [ 0.002559] Disabling memory control group subsystem
  53. [ 0.007095] ASID allocator initialised with 32768 entries
  54. [ 0.009091] Hierarchical SRCU implementation.
  55. [ 0.011347] EFI services will not be available.
  56. [ 0.013158] smp: Bringing up secondary CPUs ...
  57. [ 0.020361] Detected VIPT I-cache on CPU1
  58. [ 0.020427] CPU1: Booted secondary processor [410fd034]
  59. [ 0.027466] Detected VIPT I-cache on CPU2
  60. [ 0.027510] CPU2: Booted secondary processor [410fd034]
  61. [ 0.034582] Detected VIPT I-cache on CPU3
  62. [ 0.034622] CPU3: Booted secondary processor [410fd034]
  63. [ 0.034760] smp: Brought up 1 node, 4 CPUs
  64. [ 0.034886] SMP: Total of 4 processors activated.
  65. [ 0.034915] CPU features: detected feature: 32-bit EL0 Support
  66. [ 0.034943] CPU features: detected feature: Kernel page table isolation (KPTI)
  67. [ 0.038331] CPU: All CPU(s) started at EL2
  68. [ 0.038382] alternatives: patching kernel code
  69. [ 0.039728] devtmpfs: initialized
  70. [ 0.052995] Enabled cp15_barrier support
  71. [ 0.053045] Enabled setend support
  72. [ 0.053357] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
  73. [ 0.053412] futex hash table entries: 1024 (order: 5, 131072 bytes)
  74. [ 0.054097] pinctrl core: initialized pinctrl subsystem
  75. [ 0.054351] DMI not present or invalid.
  76. [ 0.054692] NET: Registered protocol family 16
  77. [ 0.059695] cpuidle: using governor menu
  78. [ 0.060160] vdso: 2 pages (1 code @ ffffff8326d87000, 1 data @ ffffff8327454000)
  79. [ 0.060209] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  80. [ 0.063665] DMA: preallocated 256 KiB pool for atomic allocations
  81. [ 0.063837] Serial: AMBA PL011 UART driver
  82. [ 0.066149] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
  83. [ 0.066777] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
  84. [ 0.100838] bcm2835-dma 3f007000.dma: DMA legacy API manager at ffffff800801d000, dmachans=0x1
  85. [ 0.102625] SCSI subsystem initialized
  86. [ 0.102890] usbcore: registered new interface driver usbfs
  87. [ 0.102974] usbcore: registered new interface driver hub
  88. [ 0.103136] usbcore: registered new device driver usb
  89. [ 0.103368] dmi: Firmware registration failed.
  90. [ 0.104149] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-11-04 16:31
  91. [ 0.105634] clocksource: Switched to clocksource arch_sys_counter
  92. [ 0.203157] VFS: Disk quotas dquot_6.6.0
  93. [ 0.203277] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  94. [ 0.203477] FS-Cache: Loaded
  95. [ 0.203758] CacheFiles: Loaded
  96. [ 0.214352] NET: Registered protocol family 2
  97. [ 0.215135] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  98. [ 0.215276] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
  99. [ 0.215499] TCP: Hash tables configured (established 8192 bind 8192)
  100. [ 0.215768] UDP hash table entries: 512 (order: 2, 16384 bytes)
  101. [ 0.215837] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  102. [ 0.216134] NET: Registered protocol family 1
  103. [ 0.216788] RPC: Registered named UNIX socket transport module.
  104. [ 0.216817] RPC: Registered udp transport module.
  105. [ 0.216840] RPC: Registered tcp transport module.
  106. [ 0.216862] RPC: Registered tcp NFSv4.1 backchannel transport module.
  107. [ 0.219670] workingset: timestamp_bits=46 max_order=18 bucket_order=0
  108. [ 0.230533] FS-Cache: Netfs 'nfs' registered for caching
  109. [ 0.231302] NFS: Registering the id_resolver key type
  110. [ 0.231357] Key type id_resolver registered
  111. [ 0.231382] Key type id_legacy registered
  112. [ 0.237210] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
  113. [ 0.237462] io scheduler noop registered
  114. [ 0.237491] io scheduler deadline registered
  115. [ 0.237739] io scheduler cfq registered (default)
  116. [ 0.237770] io scheduler mq-deadline registered
  117. [ 0.237797] io scheduler kyber registered
  118. [ 0.241286] BCM2708FB: allocated DMA memory f7850000
  119. [ 0.241348] BCM2708FB: allocated DMA channel 0 @ ffffff800801d000
  120. [ 0.248298] Console: switching to colour frame buffer device 82x26
  121. [ 0.253921] bcm2835-rng 3f104000.rng: hwrng registered
  122. [ 0.255372] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
  123. [ 0.258746] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
  124. [ 0.261927] cacheinfo: Unable to detect cache hierarchy for CPU 0
  125. [ 0.275763] brd: module loaded
  126. [ 0.288798] loop: module loaded
  127. [ 0.290311] Loading iSCSI transport class v2.0-870.
  128. [ 0.292691] libphy: Fixed MDIO Bus: probed
  129. [ 0.294324] usbcore: registered new interface driver lan78xx
  130. [ 0.295913] usbcore: registered new interface driver smsc95xx
  131. [ 0.297368] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  132. [ 0.326772] dwc_otg 3f980000.usb: base=0x08320000
  133. [ 0.528500] Core Release: 2.80a
  134. [ 0.529976] Setting default values for core params
  135. [ 0.531504] Finished setting default values for core params
  136. [ 0.733327] Using Buffer DMA mode
  137. [ 0.734865] Periodic Transfer Interrupt Enhancement - disabled
  138. [ 0.736466] Multiprocessor Interrupt Enhancement - disabled
  139. [ 0.738056] OTG VER PARAM: 0, OTG VER FLAG: 0
  140. [ 0.739633] Dedicated Tx FIFOs mode
  141. [ 0.741731] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0x08181000 dma = 0xf7844000 len=9024
  142. [ 0.744755] FIQ FSM acceleration enabled for :
  143. Non-periodic Split Transactions
  144. Periodic Split Transactions
  145. High-Speed Isochronous Endpoints
  146. Interrupt/Control Split Transaction hack enabled
  147. [ 0.751719] dwc_otg: Microframe scheduler enabled
  148. [ 0.751791] WARN::hcd_init_fiq:486: MPHI regs_base at 0x08045000
  149. [ 0.753319] dwc_otg 3f980000.usb: DWC OTG Controller
  150. [ 0.754784] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
  151. [ 0.756335] dwc_otg 3f980000.usb: irq 15, io mem 0x00000000
  152. [ 0.757868] Init: Port Power? op_state=1
  153. [ 0.759336] Init: Power Port (0)
  154. [ 0.761012] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  155. [ 0.762542] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  156. [ 0.764066] usb usb1: Product: DWC OTG Controller
  157. [ 0.765557] usb usb1: Manufacturer: Linux 4.14.80-Re4son-v8+ dwc_otg_hcd
  158. [ 0.767080] usb usb1: SerialNumber: 3f980000.usb
  159. [ 0.769274] hub 1-0:1.0: USB hub found
  160. [ 0.770780] hub 1-0:1.0: 1 port detected
  161. [ 0.772811] dwc_otg: FIQ enabled
  162. [ 0.772820] dwc_otg: NAK holdoff enabled
  163. [ 0.772828] dwc_otg: FIQ split-transaction FSM enabled
  164. [ 0.772841] Module dwc_common_port init
  165. [ 0.773408] usbcore: registered new interface driver usb-storage
  166. [ 0.774986] IR NEC protocol handler initialized
  167. [ 0.776387] IR RC5(x/sz) protocol handler initialized
  168. [ 0.777784] IR RC6 protocol handler initialized
  169. [ 0.779183] IR JVC protocol handler initialized
  170. [ 0.780553] IR Sony protocol handler initialized
  171. [ 0.781929] IR SANYO protocol handler initialized
  172. [ 0.783295] IR Sharp protocol handler initialized
  173. [ 0.784600] IR MCE Keyboard/mouse protocol handler initialized
  174. [ 0.785916] IR XMP protocol handler initialized
  175. [ 0.788057] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
  176. [ 0.789730] bcm2835-cpufreq: min=600000 max=1200000
  177. [ 0.791540] sdhci: Secure Digital Host Controller Interface driver
  178. [ 0.793021] sdhci: Copyright(c) Pierre Ossman
  179. [ 0.794504] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
  180. [ 0.795436] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
  181. [ 0.796220] Error: Driver 'sdhost-bcm2835' is already registered, aborting...
  182. [ 0.796951] sdhci-pltfm: SDHCI platform and OF driver helper
  183. [ 0.798839] ledtrig-cpu: registered to indicate activity on CPUs
  184. [ 0.799701] hidraw: raw HID events driver (C) Jiri Kosina
  185. [ 0.800548] usbcore: registered new interface driver usbhid
  186. [ 0.801308] usbhid: USB HID core driver
  187. [ 0.802206] Initializing XFRM netlink socket
  188. [ 0.802978] NET: Registered protocol family 17
  189. [ 0.803789] Key type dns_resolver registered
  190. [ 0.805152] registered taskstats version 1
  191. [ 0.806555] Key type encrypted registered
  192. [ 0.811758] uart-pl011 3f201000.serial: cts_event_workaround enabled
  193. [ 0.812653] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 72, base_baud = 0) is a PL011 rev2
  194. [ 0.815485] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
  195. [ 0.816328] mmc-bcm2835 3f300000.mmc: DMA channel allocated
  196. [ 0.841564] sdhost: log_buf @ ffffff80080ad000 (f7847000)
  197. [ 0.865706] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  198. [ 0.868340] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  199. [ 0.870629] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  200. [ 0.874069] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  201. [ 0.888659] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
  202. [ 0.891773] of_cfs_init
  203. [ 0.893179] of_cfs_init: OK
  204. [ 0.895115] Waiting for root device /dev/mmcblk0p2...
  205. [ 0.946431] random: fast init done
  206. [ 0.977756] Indeed it is in host mode hprt0 = 00021501
  207. [ 0.995214] mmc0: host does not support reading read-only switch, assuming write-enable
  208. [ 1.000713] mmc1: new high speed SDIO card at address 0001
  209. [ 1.002647] mmc0: new high speed SDHC card at address aaaa
  210. [ 1.004569] bounce: isa pool size: 16 pages
  211. [ 1.013668] mmcblk0: mmc0:aaaa SL32G 29.7 GiB
  212. [ 1.052608] mmcblk0: p1 p2
  213. [ 1.070907] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: noload
  214. [ 1.073541] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  215. [ 1.081979] devtmpfs: mounted
  216. [ 1.089043] Freeing unused kernel memory: 2752K
  217. [ 1.160697] usb 1-1: new high-speed USB device number 2 using dwc_otg
  218. [ 1.162485] Indeed it is in host mode hprt0 = 00001101
  219. [ 1.350112] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
  220. [ 1.351795] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  221. [ 1.354178] hub 1-1:1.0: USB hub found
  222. [ 1.355966] hub 1-1:1.0: 5 ports detected
  223. [ 1.645694] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  224. [ 1.647448] systemd[1]: System time before build time, advancing clock.
  225. [ 1.737115] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
  226. [ 1.738855] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  227. [ 1.743544] smsc95xx v1.0.6
  228. [ 1.771808] NET: Registered protocol family 10
  229. [ 1.773741] Segment Routing with IPv6
  230. [ 1.789653] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:ba:a5:07
  231. [ 1.793317] ip_tables: (C) 2000-2006 Netfilter Core Team
  232. [ 1.825501] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
  233. [ 1.831383] systemd[1]: Detected architecture arm64.
  234. [ 1.844940] systemd[1]: Set hostname to <kali-pi3>.
  235. [ 1.976680] usb 1-1.2: new low-speed USB device number 4 using dwc_otg
  236. [ 2.085251] usb 1-1.2: New USB device found, idVendor=1997, idProduct=1221
  237. [ 2.087123] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  238. [ 2.088432] usb 1-1.2: Product: Mini Keybo
  239. [ 2.089309] usb 1-1.2: Manufacturer: Riite
  240. [ 2.104359] input: Riite Mini Keybo as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:1997:1221.0001/input/input0
  241. [ 2.130829] random: crng init done
  242. [ 2.160099] hid-generic 0003:1997:1221.0001: input,hidraw0: USB HID v1.00 Keyboard [Riite Mini Keybo] on usb-3f980000.usb-1.2/input0
  243. [ 2.180124] input: Riite Mini Keybo as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.1/0003:1997:1221.0002/input/input1
  244. [ 2.233821] hid-generic 0003:1997:1221.0002: input,hidraw1: USB HID v1.00 Mouse [Riite Mini Keybo] on usb-3f980000.usb-1.2/input1
  245. [ 2.411204] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  246. [ 2.414645] systemd[1]: Listening on initctl Compatibility Named Pipe.
  247. [ 2.417301] systemd[1]: Listening on Journal Socket.
  248. [ 2.419822] systemd[1]: Listening on Journal Socket (/dev/log).
  249. [ 2.422365] systemd[1]: Listening on udev Kernel Socket.
  250. [ 2.428236] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  251. [ 2.445019] systemd[1]: Listening on Syslog Socket.
  252. [ 2.757213] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
  253. [ 2.822357] systemd-journald[109]: Received request to flush runtime journal from PID 1
  254. [ 3.653743] vchiq: module is from the staging directory, the quality is unknown, you have been warned.
  255. [ 3.662351] vchiq: vchiq_init_state: slot_zero = ffffff8008c7d000, is_master = 0
  256. [ 4.189311] uart-pl011 3f201000.serial: no DMA platform data
  257. [ 4.434042] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43430-sdio.bin for chip 0x00a9a6(43430) rev 0x000001
  258. [ 4.436051] usbcore: registered new interface driver brcmfmac
  259. [ 4.461006] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.bin failed with error -2
  260. [ 5.471820] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50
  261. [ 6.473718] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50
  262. [ 8.987868] Bluetooth: Core ver 2.22
  263. [ 8.989175] NET: Registered protocol family 31
  264. [ 8.990528] Bluetooth: HCI device and connection manager initialized
  265. [ 8.991709] Bluetooth: HCI socket layer initialized
  266. [ 8.992959] Bluetooth: L2CAP socket layer initialized
  267. [ 8.994202] Bluetooth: SCO socket layer initialized
  268. [ 9.011709] Bluetooth: HCI UART driver ver 2.3
  269. [ 9.012814] Bluetooth: HCI UART protocol H4 registered
  270. [ 9.013909] Bluetooth: HCI UART protocol Three-wire (H5) registered
  271. [ 9.015101] Bluetooth: HCI UART protocol Broadcom registered
  272. [ 9.171794] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  273. [ 9.171895] Bluetooth: BNEP filters: protocol multicast
  274. [ 9.171965] Bluetooth: BNEP socket layer initialized
  275. [32695.065462] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
  276. [32696.574162] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x43E1
  277.  
Powered by spacepaste. Paste removal.