spacepaste

Paste details

reply | raw

  1.  
  2. [ 0.000000] Linux version 4.12.12-gentoo (root@richard-desktop) (gcc version 6.4.0 (Gentoo 6.4.0 p1.1) ) #2 SMP Thu Nov 23 02:29:01 CET 2017
  3. [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.12.12-gentoo root=/dev/sda4 ro single
  4. [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
  5. [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
  6. [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
  7. [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
  8. [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
  9. [ 0.000000] e820: BIOS-provided physical RAM map:
  10. [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
  11. [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
  12. [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
  13. [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
  14. [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a8800fff] usable
  15. [ 0.000000] BIOS-e820: [mem 0x00000000a8801000-0x00000000a8807fff] ACPI NVS
  16. [ 0.000000] BIOS-e820: [mem 0x00000000a8808000-0x00000000a8c54fff] usable
  17. [ 0.000000] BIOS-e820: [mem 0x00000000a8c55000-0x00000000a90a5fff] reserved
  18. [ 0.000000] BIOS-e820: [mem 0x00000000a90a6000-0x00000000bc661fff] usable
  19. [ 0.000000] BIOS-e820: [mem 0x00000000bc662000-0x00000000bc869fff] reserved
  20. [ 0.000000] BIOS-e820: [mem 0x00000000bc86a000-0x00000000bc87ffff] ACPI data
  21. [ 0.000000] BIOS-e820: [mem 0x00000000bc880000-0x00000000bcdc1fff] ACPI NVS
  22. [ 0.000000] BIOS-e820: [mem 0x00000000bcdc2000-0x00000000bdf5bfff] reserved
  23. [ 0.000000] BIOS-e820: [mem 0x00000000bdf5c000-0x00000000bdffefff] type 20
  24. [ 0.000000] BIOS-e820: [mem 0x00000000bdfff000-0x00000000bdffffff] usable
  25. [ 0.000000] BIOS-e820: [mem 0x00000000bf000000-0x00000000cf1fffff] reserved
  26. [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
  27. [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
  28. [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
  29. [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
  30. [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
  31. [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
  32. [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fdfffff] usable
  33. [ 0.000000] NX (Execute Disable) protection: active
  34. [ 0.000000] efi: EFI v2.31 by American Megatrends
  35. [ 0.000000] efi: ESRT=0xbdf5a818 ACPI=0xbc86e000 ACPI 2.0=0xbc86e000 SMBIOS=0xf04c0 MPS=0xfd500
  36. [ 0.000000] SMBIOS 2.7 present.
  37. [ 0.000000] DMI: ASUS All Series/Z87-PRO, BIOS 1405 08/19/2013
  38. [ 0.000000] tsc: Fast TSC calibration using PIT
  39. [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
  40. [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
  41. [ 0.000000] e820: last_pfn = 0x22fe00 max_arch_pfn = 0x400000000
  42. [ 0.000000] MTRR default type: uncachable
  43. [ 0.000000] MTRR fixed ranges enabled:
  44. [ 0.000000] 00000-9FFFF write-back
  45. [ 0.000000] A0000-BFFFF uncachable
  46. [ 0.000000] C0000-D7FFF write-protect
  47. [ 0.000000] D8000-DFFFF uncachable
  48. [ 0.000000] E0000-FFFFF write-protect
  49. [ 0.000000] MTRR variable ranges enabled:
  50. [ 0.000000] 0 base 0000000000 mask 7E00000000 write-back
  51. [ 0.000000] 1 base 0200000000 mask 7FE0000000 write-back
  52. [ 0.000000] 2 base 0220000000 mask 7FF0000000 write-back
  53. [ 0.000000] 3 base 00C0000000 mask 7FC0000000 uncachable
  54. [ 0.000000] 4 base 00BF000000 mask 7FFF000000 uncachable
  55. [ 0.000000] 5 base 022FE00000 mask 7FFFE00000 uncachable
  56. [ 0.000000] 6 disabled
  57. [ 0.000000] 7 disabled
  58. [ 0.000000] 8 disabled
  59. [ 0.000000] 9 disabled
  60. [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
  61. [ 0.000000] e820: update [mem 0xbf000000-0xffffffff] usable ==> reserved
  62. [ 0.000000] e820: last_pfn = 0xbe000 max_arch_pfn = 0x400000000
  63. [ 0.000000] found SMP MP-table at [mem 0x000fd7f0-0x000fd7ff] mapped at [ffff8800000fd7f0]
  64. [ 0.000000] esrt: Reserving ESRT space from 0x00000000bdf5a818 to 0x00000000bdf5a850.
  65. [ 0.000000] Scanning 1 areas for low memory corruption
  66. [ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576
  67. [ 0.000000] Using GB pages for direct mapping
  68. [ 0.000000] BRK [0x0277f000, 0x0277ffff] PGTABLE
  69. [ 0.000000] BRK [0x02780000, 0x02780fff] PGTABLE
  70. [ 0.000000] BRK [0x02781000, 0x02781fff] PGTABLE
  71. [ 0.000000] BRK [0x02782000, 0x02782fff] PGTABLE
  72. [ 0.000000] BRK [0x02783000, 0x02783fff] PGTABLE
  73. [ 0.000000] BRK [0x02784000, 0x02784fff] PGTABLE
  74. [ 0.000000] Secure boot could not be determined
  75. [ 0.000000] ACPI: Early table checksum verification disabled
  76. [ 0.000000] ACPI: RSDP 0x00000000BC86E000 000024 (v02 ALASKA)
  77. [ 0.000000] ACPI: XSDT 0x00000000BC86E080 000074 (v01 ALASKA A M I 01072009 AMI 00010013)
  78. [ 0.000000] ACPI: FACP 0x00000000BC87AE78 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
  79. [ 0.000000] ACPI: DSDT 0x00000000BC86E188 00CCED (v02 ALASKA A M I 00000024 INTL 20091112)
  80. [ 0.000000] ACPI: FACS 0x00000000BCDC0080 000040
  81. [ 0.000000] ACPI: APIC 0x00000000BC87AF88 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
  82. [ 0.000000] ACPI: FPDT 0x00000000BC87B020 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
  83. [ 0.000000] ACPI: SSDT 0x00000000BC87B068 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
  84. [ 0.000000] ACPI: SSDT 0x00000000BC87B5A8 000AD8 (v01 PmRef CpuPm 00003000 INTL 20051117)
  85. [ 0.000000] ACPI: MCFG 0x00000000BC87C080 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
  86. [ 0.000000] ACPI: HPET 0x00000000BC87C0C0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
  87. [ 0.000000] ACPI: SSDT 0x00000000BC87C0F8 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
  88. [ 0.000000] ACPI: SSDT 0x00000000BC87C468 00329E (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
  89. [ 0.000000] ACPI: BGRT 0x00000000BC87F760 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
  90. [ 0.000000] ACPI: Local APIC address 0xfee00000
  91. [ 0.000000] No NUMA configuration found
  92. [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022fdfffff]
  93. [ 0.000000] NODE_DATA(0) allocated [mem 0x22fdf8000-0x22fdfbfff]
  94. [ 0.000000] Zone ranges:
  95. [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
  96. [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
  97. [ 0.000000] Normal [mem 0x0000000100000000-0x000000022fdfffff]
  98. [ 0.000000] Movable zone start for each node
  99. [ 0.000000] Early memory node ranges
  100. [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
  101. [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009efff]
  102. [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000a8800fff]
  103. [ 0.000000] node 0: [mem 0x00000000a8808000-0x00000000a8c54fff]
  104. [ 0.000000] node 0: [mem 0x00000000a90a6000-0x00000000bc661fff]
  105. [ 0.000000] node 0: [mem 0x00000000bdfff000-0x00000000bdffffff]
  106. [ 0.000000] node 0: [mem 0x0000000100000000-0x000000022fdfffff]
  107. [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000022fdfffff]
  108. [ 0.000000] On node 0 totalpages: 2015144
  109. [ 0.000000] DMA zone: 64 pages used for memmap
  110. [ 0.000000] DMA zone: 44 pages reserved
  111. [ 0.000000] DMA zone: 3997 pages, LIFO batch:0
  112. [ 0.000000] DMA32 zone: 11977 pages used for memmap
  113. [ 0.000000] DMA32 zone: 766475 pages, LIFO batch:31
  114. [ 0.000000] Normal zone: 19448 pages used for memmap
  115. [ 0.000000] Normal zone: 1244672 pages, LIFO batch:31
  116. [ 0.000000] Reserving Intel graphics memory at 0x00000000bf200000-0x00000000cf1fffff
  117. [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
  118. [ 0.000000] ACPI: Local APIC address 0xfee00000
  119. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
  120. [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
  121. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  122. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  123. [ 0.000000] ACPI: IRQ0 used by override.
  124. [ 0.000000] ACPI: IRQ9 used by override.
  125. [ 0.000000] Using ACPI (MADT) for SMP configuration information
  126. [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
  127. [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
  128. [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
  129. [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
  130. [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
  131. [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
  132. [ 0.000000] PM: Registered nosave memory: [mem 0xa8801000-0xa8807fff]
  133. [ 0.000000] PM: Registered nosave memory: [mem 0xa8c55000-0xa90a5fff]
  134. [ 0.000000] PM: Registered nosave memory: [mem 0xbc662000-0xbc869fff]
  135. [ 0.000000] PM: Registered nosave memory: [mem 0xbc86a000-0xbc87ffff]
  136. [ 0.000000] PM: Registered nosave memory: [mem 0xbc880000-0xbcdc1fff]
  137. [ 0.000000] PM: Registered nosave memory: [mem 0xbcdc2000-0xbdf5bfff]
  138. [ 0.000000] PM: Registered nosave memory: [mem 0xbdf5c000-0xbdffefff]
  139. [ 0.000000] PM: Registered nosave memory: [mem 0xbe000000-0xbeffffff]
  140. [ 0.000000] PM: Registered nosave memory: [mem 0xbf000000-0xcf1fffff]
  141. [ 0.000000] PM: Registered nosave memory: [mem 0xcf200000-0xf7ffffff]
  142. [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
  143. [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
  144. [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
  145. [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
  146. [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
  147. [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
  148. [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
  149. [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
  150. [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
  151. [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
  152. [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
  153. [ 0.000000] e820: [mem 0xcf200000-0xf7ffffff] available for PCI devices
  154. [ 0.000000] Booting paravirtualized kernel on bare hardware
  155. [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
  156. [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
  157. [ 0.000000] percpu: Embedded 38 pages/cpu @ffff88022fa00000 s115992 r8192 d31464 u262144
  158. [ 0.000000] pcpu-alloc: s115992 r8192 d31464 u262144 alloc=1*2097152
  159. [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
  160. [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1983611
  161. [ 0.000000] Policy zone: Normal
  162. [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.12.12-gentoo root=/dev/sda4 ro single
  163. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  164. [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
  165. [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
  166. [ 0.000000] Memory: 7616392K/8060576K available (9975K kernel code, 1353K rwdata, 3064K rodata, 1364K init, 724K bss, 444184K reserved, 0K cma-reserved)
  167. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
  168. [ 0.000000] Hierarchical RCU implementation.
  169. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
  170. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
  171. [ 0.000000] NR_IRQS:4352 nr_irqs:488 16
  172. [ 0.000000] Console: colour dummy device 80x25
  173. [ 0.000000] console [tty0] enabled
  174. [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
  175. [ 0.000000] hpet clockevent registered
  176. [ 0.000000] tsc: Fast TSC calibration using PIT
  177. [ 0.001000] tsc: Detected 3500.072 MHz processor
  178. [ 0.001000] Calibrating delay loop (skipped), value calculated using timer frequency.. 7000.14 BogoMIPS (lpj=3500072)
  179. [ 0.001000] pid_max: default: 32768 minimum: 301
  180. [ 0.001000] ACPI: Core revision 20170303
  181. [ 0.007039] ACPI: 5 ACPI AML tables successfully acquired and loaded
  182. [ 0.007590] Security Framework initialized
  183. [ 0.007593] SELinux: Initializing.
  184. [ 0.007600] SELinux: Starting in permissive mode
  185. [ 0.007825] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
  186. [ 0.008816] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
  187. [ 0.009257] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
  188. [ 0.009263] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
  189. [ 0.009399] CPU: Physical Processor ID: 0
  190. [ 0.009401] CPU: Processor Core ID: 0
  191. [ 0.009405] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
  192. [ 0.009407] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
  193. [ 0.009411] mce: CPU supports 9 MCE banks
  194. [ 0.009418] CPU0: Thermal monitoring enabled (TM1)
  195. [ 0.009429] process: using mwait in idle threads
  196. [ 0.009432] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
  197. [ 0.009434] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
  198. [ 0.009554] Freeing SMP alternatives memory: 36K
  199. [ 0.014933] smpboot: Max logical packages: 2
  200. [ 0.015301] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  201. [ 0.025311] TSC deadline timer enabled
  202. [ 0.025313] smpboot: CPU0: Intel(R) Core(TM) i7-4770K CPU @ 3.50GHz (family: 0x6, model: 0x3c, stepping: 0x3)
  203. [ 0.025352] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
  204. [ 0.025379] ... version: 3
  205. [ 0.025380] ... bit width: 48
  206. [ 0.025382] ... generic registers: 4
  207. [ 0.025384] ... value mask: 0000ffffffffffff
  208. [ 0.025386] ... max period: 00007fffffffffff
  209. [ 0.025387] ... fixed-purpose events: 3
  210. [ 0.025389] ... event mask: 000000070000000f
  211. [ 0.025494] smp: Bringing up secondary CPUs ...
  212. [ 0.025532] x86: Booting SMP configuration:
  213. [ 0.025534] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
  214. [ 0.445013] smp: Brought up 1 node, 8 CPUs
  215. [ 0.445013] smpboot: Total of 8 processors activated (56031.05 BogoMIPS)
  216. [ 0.446054] sched_clock: Marking stable (446000000, 0)->(449715542, -3715542)
  217. [ 0.446255] devtmpfs: initialized
  218. [ 0.446365] PM: Registering ACPI NVS region [mem 0xa8801000-0xa8807fff] (28672 bytes)
  219. [ 0.446368] PM: Registering ACPI NVS region [mem 0xbc880000-0xbcdc1fff] (5513216 bytes)
  220. [ 0.446442] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
  221. [ 0.446451] futex hash table entries: 2048 (order: 5, 131072 bytes)
  222. [ 0.446454] kworker/u16:0 (50) used greatest stack depth: 14008 bytes left
  223. [ 0.446506] RTC time: 15:34:54, date: 11/25/17
  224. [ 0.446564] NET: Registered protocol family 16
  225. [ 0.446681] cpuidle: using governor menu
  226. [ 0.446684] PCCT header not found.
  227. [ 0.446713] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
  228. [ 0.446716] ACPI: bus type PCI registered
  229. [ 0.446749] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
  230. [ 0.446753] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
  231. [ 0.446758] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
  232. [ 0.446806] PCI: Using configuration type 1 for base access
  233. [ 0.446846] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
  234. [ 0.449017] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  235. [ 0.449105] ACPI: Added _OSI(Module Device)
  236. [ 0.449108] ACPI: Added _OSI(Processor Device)
  237. [ 0.449109] ACPI: Added _OSI(3.0 _SCP Extensions)
  238. [ 0.449111] ACPI: Added _OSI(Processor Aggregator Device)
  239. [ 0.449211] ACPI: Executed 1 blocks of module-level executable AML code
  240. [ 0.451596] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
  241. [ 0.451887] ACPI: Dynamic OEM Table Load:
  242. [ 0.451892] ACPI: SSDT 0xFFFF880225E34800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
  243. [ 0.452088] ACPI: Dynamic OEM Table Load:
  244. [ 0.452093] ACPI: SSDT 0xFFFF880225E80000 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
  245. [ 0.452289] ACPI: Dynamic OEM Table Load:
  246. [ 0.452292] ACPI: SSDT 0xFFFF880226128400 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
  247. [ 0.453186] ACPI: Interpreter enabled
  248. [ 0.453203] ACPI: (supports S0 S3 S4 S5)
  249. [ 0.453205] ACPI: Using IOAPIC for interrupt routing
  250. [ 0.453223] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
  251. [ 0.458488] ACPI: Power Resource [FN00] (off)
  252. [ 0.458533] ACPI: Power Resource [FN01] (off)
  253. [ 0.458575] ACPI: Power Resource [FN02] (off)
  254. [ 0.458616] ACPI: Power Resource [FN03] (off)
  255. [ 0.458658] ACPI: Power Resource [FN04] (off)
  256. [ 0.459164] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
  257. [ 0.459169] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
  258. [ 0.459303] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
  259. [ 0.459526] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
  260. [ 0.459528] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
  261. [ 0.459682] PCI host bridge to bus 0000:00
  262. [ 0.459685] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
  263. [ 0.459688] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
  264. [ 0.459691] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
  265. [ 0.459694] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
  266. [ 0.459697] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
  267. [ 0.459700] pci_bus 0000:00: root bus resource [mem 0xcf200000-0xfeafffff window]
  268. [ 0.459703] pci_bus 0000:00: root bus resource [bus 00-3e]
  269. [ 0.459709] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
  270. [ 0.459766] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
  271. [ 0.459790] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
  272. [ 0.459841] pci 0000:00:01.0: System wakeup disabled by ACPI
  273. [ 0.459860] pci 0000:00:01.1: [8086:0c05] type 01 class 0x060400
  274. [ 0.459882] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
  275. [ 0.459924] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
  276. [ 0.459931] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
  277. [ 0.459935] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
  278. [ 0.459937] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
  279. [ 0.459986] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
  280. [ 0.459990] pci 0000:00:03.0: reg 0x10: [mem 0xf7c34000-0xf7c37fff 64bit]
  281. [ 0.460056] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
  282. [ 0.460069] pci 0000:00:14.0: reg 0x10: [mem 0xf7c20000-0xf7c2ffff 64bit]
  283. [ 0.460115] pci 0000:00:14.0: PME# supported from D3hot D3cold
  284. [ 0.460142] pci 0000:00:14.0: System wakeup disabled by ACPI
  285. [ 0.460162] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
  286. [ 0.460176] pci 0000:00:16.0: reg 0x10: [mem 0xf7c3f000-0xf7c3f00f 64bit]
  287. [ 0.460225] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
  288. [ 0.460272] pci 0000:00:19.0: [8086:153b] type 00 class 0x020000
  289. [ 0.460283] pci 0000:00:19.0: reg 0x10: [mem 0xf7c00000-0xf7c1ffff]
  290. [ 0.460289] pci 0000:00:19.0: reg 0x14: [mem 0xf7c3d000-0xf7c3dfff]
  291. [ 0.460294] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
  292. [ 0.460479] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
  293. [ 0.460505] pci 0000:00:19.0: System wakeup disabled by ACPI
  294. [ 0.460526] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
  295. [ 0.460539] pci 0000:00:1a.0: reg 0x10: [mem 0xf7c3c000-0xf7c3c3ff]
  296. [ 0.460607] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
  297. [ 0.460642] pci 0000:00:1a.0: System wakeup disabled by ACPI
  298. [ 0.460663] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
  299. [ 0.460675] pci 0000:00:1b.0: reg 0x10: [mem 0xf7c30000-0xf7c33fff 64bit]
  300. [ 0.460721] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
  301. [ 0.460749] pci 0000:00:1b.0: System wakeup disabled by ACPI
  302. [ 0.460768] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
  303. [ 0.460818] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
  304. [ 0.460865] pci 0000:00:1c.0: System wakeup disabled by ACPI
  305. [ 0.460885] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400
  306. [ 0.460936] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
  307. [ 0.460981] pci 0000:00:1c.1: System wakeup disabled by ACPI
  308. [ 0.461002] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400
  309. [ 0.461055] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
  310. [ 0.461099] pci 0000:00:1c.5: System wakeup disabled by ACPI
  311. [ 0.461122] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
  312. [ 0.461135] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c3b000-0xf7c3b3ff]
  313. [ 0.461203] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
  314. [ 0.461238] pci 0000:00:1d.0: System wakeup disabled by ACPI
  315. [ 0.461259] pci 0000:00:1f.0: [8086:8c44] type 00 class 0x060100
  316. [ 0.461521] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
  317. [ 0.461531] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
  318. [ 0.461536] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
  319. [ 0.461541] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
  320. [ 0.461546] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
  321. [ 0.461551] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
  322. [ 0.461556] pci 0000:00:1f.2: reg 0x24: [mem 0xf7c3a000-0xf7c3a7ff]
  323. [ 0.461583] pci 0000:00:1f.2: PME# supported from D3hot
  324. [ 0.461622] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
  325. [ 0.461632] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c39000-0xf7c390ff 64bit]
  326. [ 0.461647] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
  327. [ 0.461716] pci 0000:01:00.0: [1002:6798] type 00 class 0x030000
  328. [ 0.461725] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
  329. [ 0.461729] pci 0000:01:00.0: reg 0x18: [mem 0xf7b00000-0xf7b3ffff 64bit]
  330. [ 0.461732] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
  331. [ 0.461737] pci 0000:01:00.0: reg 0x30: [mem 0xf7b40000-0xf7b5ffff pref]
  332. [ 0.461763] pci 0000:01:00.0: supports D1 D2
  333. [ 0.461764] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
  334. [ 0.461775] pci 0000:01:00.0: System wakeup disabled by ACPI
  335. [ 0.461793] pci 0000:01:00.1: [1002:aaa0] type 00 class 0x040300
  336. [ 0.461802] pci 0000:01:00.1: reg 0x10: [mem 0xf7b60000-0xf7b63fff 64bit]
  337. [ 0.461839] pci 0000:01:00.1: supports D1 D2
  338. [ 0.464046] pci 0000:00:01.0: PCI bridge to [bus 01]
  339. [ 0.464049] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
  340. [ 0.464050] pci 0000:00:01.0: bridge window [mem 0xf7b00000-0xf7bfffff]
  341. [ 0.464052] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
  342. [ 0.464074] pci 0000:02:00.0: [1b4b:9235] type 00 class 0x010601
  343. [ 0.464083] pci 0000:02:00.0: reg 0x10: [io 0xd050-0xd057]
  344. [ 0.464088] pci 0000:02:00.0: reg 0x14: [io 0xd040-0xd043]
  345. [ 0.464093] pci 0000:02:00.0: reg 0x18: [io 0xd030-0xd037]
  346. [ 0.464098] pci 0000:02:00.0: reg 0x1c: [io 0xd020-0xd023]
  347. [ 0.464102] pci 0000:02:00.0: reg 0x20: [io 0xd000-0xd01f]
  348. [ 0.464107] pci 0000:02:00.0: reg 0x24: [mem 0xf7a40000-0xf7a407ff]
  349. [ 0.464111] pci 0000:02:00.0: reg 0x30: [mem 0xf7a00000-0xf7a3ffff pref]
  350. [ 0.464137] pci 0000:02:00.0: PME# supported from D3hot
  351. [ 0.467055] pci 0000:00:01.1: PCI bridge to [bus 02]
  352. [ 0.467058] pci 0000:00:01.1: bridge window [io 0xd000-0xdfff]
  353. [ 0.467059] pci 0000:00:01.1: bridge window [mem 0xf7a00000-0xf7afffff]
  354. [ 0.467087] pci 0000:00:1c.0: PCI bridge to [bus 03]
  355. [ 0.467133] pci 0000:04:00.0: [168c:0034] type 00 class 0x028000
  356. [ 0.467156] pci 0000:04:00.0: reg 0x10: [mem 0xf7900000-0xf797ffff 64bit]
  357. [ 0.467189] pci 0000:04:00.0: reg 0x30: [mem 0xf7980000-0xf798ffff pref]
  358. [ 0.467251] pci 0000:04:00.0: supports D1 D2
  359. [ 0.467252] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  360. [ 0.467277] pci 0000:04:00.0: System wakeup disabled by ACPI
  361. [ 0.470068] pci 0000:00:1c.1: PCI bridge to [bus 04]
  362. [ 0.470073] pci 0000:00:1c.1: bridge window [mem 0xf7900000-0xf79fffff]
  363. [ 0.470115] pci 0000:05:00.0: [1b21:0612] type 00 class 0x010601
  364. [ 0.470132] pci 0000:05:00.0: reg 0x10: [io 0xc050-0xc057]
  365. [ 0.470141] pci 0000:05:00.0: reg 0x14: [io 0xc040-0xc043]
  366. [ 0.470150] pci 0000:05:00.0: reg 0x18: [io 0xc030-0xc037]
  367. [ 0.470159] pci 0000:05:00.0: reg 0x1c: [io 0xc020-0xc023]
  368. [ 0.470169] pci 0000:05:00.0: reg 0x20: [io 0xc000-0xc01f]
  369. [ 0.470178] pci 0000:05:00.0: reg 0x24: [mem 0xf7800000-0xf78001ff]
  370. [ 0.470253] pci 0000:05:00.0: System wakeup disabled by ACPI
  371. [ 0.473072] pci 0000:00:1c.5: PCI bridge to [bus 05]
  372. [ 0.473075] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
  373. [ 0.473077] pci 0000:00:1c.5: bridge window [mem 0xf7800000-0xf78fffff]
  374. [ 0.473614] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
  375. [ 0.473644] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
  376. [ 0.473672] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 10 11 12 14 15)
  377. [ 0.473700] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
  378. [ 0.473728] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
  379. [ 0.473756] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 *15)
  380. [ 0.473784] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15)
  381. [ 0.473811] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
  382. [ 0.474032] ACPI: Enabled 5 GPEs in block 00 to 3F
  383. [ 0.474102] pci 0000:00:02.0: vgaarb: setting as boot VGA device
  384. [ 0.474105] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
  385. [ 0.474110] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
  386. [ 0.474113] pci 0000:01:00.0: vgaarb: bridge control possible
  387. [ 0.474115] pci 0000:00:02.0: vgaarb: no bridge control possible
  388. [ 0.474117] vgaarb: loaded
  389. [ 0.474169] SCSI subsystem initialized
  390. [ 0.474202] libata version 3.00 loaded.
  391. [ 0.474228] ACPI: bus type USB registered
  392. [ 0.474243] usbcore: registered new interface driver usbfs
  393. [ 0.474251] usbcore: registered new interface driver hub
  394. [ 0.474266] usbcore: registered new device driver usb
  395. [ 0.474280] pps_core: LinuxPPS API ver. 1 registered
  396. [ 0.474282] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  397. [ 0.474290] PTP clock support registered
  398. [ 0.474461] EDAC MC: Ver: 3.0.0
  399. [ 0.474529] Registered efivars operations
  400. [ 0.477455] Advanced Linux Sound Architecture Driver Initialized.
  401. [ 0.477465] PCI: Using ACPI for IRQ routing
  402. [ 0.478714] PCI: pci_cache_line_size set to 64 bytes
  403. [ 0.478749] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
  404. [ 0.478750] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
  405. [ 0.478751] e820: reserve RAM buffer [mem 0xa8801000-0xabffffff]
  406. [ 0.478751] e820: reserve RAM buffer [mem 0xa8c55000-0xabffffff]
  407. [ 0.478752] e820: reserve RAM buffer [mem 0xbc662000-0xbfffffff]
  408. [ 0.478752] e820: reserve RAM buffer [mem 0xbe000000-0xbfffffff]
  409. [ 0.478753] e820: reserve RAM buffer [mem 0x22fe00000-0x22fffffff]
  410. [ 0.478865] NetLabel: Initializing
  411. [ 0.478867] NetLabel: domain hash size = 128
  412. [ 0.478869] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
  413. [ 0.478879] NetLabel: unlabeled traffic allowed by default
  414. [ 0.478926] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
  415. [ 0.478930] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
  416. [ 0.480956] clocksource: Switched to clocksource hpet
  417. [ 0.486747] VFS: Disk quotas dquot_6.6.0
  418. [ 0.486760] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  419. [ 0.487871] pnp: PnP ACPI init
  420. [ 0.487929] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
  421. [ 0.487933] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
  422. [ 0.488042] system 00:01: [io 0x0680-0x069f] has been reserved
  423. [ 0.488045] system 00:01: [io 0xffff] has been reserved
  424. [ 0.488048] system 00:01: [io 0xffff] has been reserved
  425. [ 0.488050] system 00:01: [io 0xffff] has been reserved
  426. [ 0.488052] system 00:01: [io 0x1c00-0x1cfe] has been reserved
  427. [ 0.488054] system 00:01: [io 0x1d00-0x1dfe] has been reserved
  428. [ 0.488056] system 00:01: [io 0x1e00-0x1efe] has been reserved
  429. [ 0.488058] system 00:01: [io 0x1f00-0x1ffe] has been reserved
  430. [ 0.488060] system 00:01: [io 0x1800-0x18fe] has been reserved
  431. [ 0.488063] system 00:01: [io 0x164e-0x164f] has been reserved
  432. [ 0.488065] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
  433. [ 0.488077] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
  434. [ 0.488104] system 00:03: [io 0x1854-0x1857] has been reserved
  435. [ 0.488107] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
  436. [ 0.488151] system 00:04: [io 0x0290-0x029f] has been reserved
  437. [ 0.488154] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
  438. [ 0.488181] system 00:05: [io 0x04d0-0x04d1] has been reserved
  439. [ 0.488183] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
  440. [ 0.488581] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
  441. [ 0.488585] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
  442. [ 0.488587] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
  443. [ 0.488590] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
  444. [ 0.488593] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
  445. [ 0.488595] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
  446. [ 0.488598] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
  447. [ 0.488601] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
  448. [ 0.488603] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
  449. [ 0.488606] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
  450. [ 0.488609] system 00:06: [mem 0xf7fef000-0xf7feffff] has been reserved
  451. [ 0.488611] system 00:06: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
  452. [ 0.488615] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
  453. [ 0.488784] pnp: PnP ACPI: found 7 devices
  454. [ 0.494152] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
  455. [ 0.494177] pci 0000:00:01.0: PCI bridge to [bus 01]
  456. [ 0.494180] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
  457. [ 0.494183] pci 0000:00:01.0: bridge window [mem 0xf7b00000-0xf7bfffff]
  458. [ 0.494186] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
  459. [ 0.494190] pci 0000:00:01.1: PCI bridge to [bus 02]
  460. [ 0.494193] pci 0000:00:01.1: bridge window [io 0xd000-0xdfff]
  461. [ 0.494196] pci 0000:00:01.1: bridge window [mem 0xf7a00000-0xf7afffff]
  462. [ 0.494200] pci 0000:00:1c.0: PCI bridge to [bus 03]
  463. [ 0.494209] pci 0000:00:1c.1: PCI bridge to [bus 04]
  464. [ 0.494213] pci 0000:00:1c.1: bridge window [mem 0xf7900000-0xf79fffff]
  465. [ 0.494219] pci 0000:00:1c.5: PCI bridge to [bus 05]
  466. [ 0.494222] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
  467. [ 0.494226] pci 0000:00:1c.5: bridge window [mem 0xf7800000-0xf78fffff]
  468. [ 0.494233] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
  469. [ 0.494234] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
  470. [ 0.494235] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
  471. [ 0.494235] pci_bus 0000:00: resource 7 [mem 0x000d8000-0x000dbfff window]
  472. [ 0.494236] pci_bus 0000:00: resource 8 [mem 0x000dc000-0x000dffff window]
  473. [ 0.494236] pci_bus 0000:00: resource 9 [mem 0xcf200000-0xfeafffff window]
  474. [ 0.494237] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
  475. [ 0.494237] pci_bus 0000:01: resource 1 [mem 0xf7b00000-0xf7bfffff]
  476. [ 0.494238] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
  477. [ 0.494239] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
  478. [ 0.494239] pci_bus 0000:02: resource 1 [mem 0xf7a00000-0xf7afffff]
  479. [ 0.494240] pci_bus 0000:04: resource 1 [mem 0xf7900000-0xf79fffff]
  480. [ 0.494241] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
  481. [ 0.494241] pci_bus 0000:05: resource 1 [mem 0xf7800000-0xf78fffff]
  482. [ 0.494299] NET: Registered protocol family 2
  483. [ 0.494410] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
  484. [ 0.494484] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  485. [ 0.494583] TCP: Hash tables configured (established 65536 bind 65536)
  486. [ 0.494607] UDP hash table entries: 4096 (order: 5, 131072 bytes)
  487. [ 0.494626] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
  488. [ 0.494664] NET: Registered protocol family 1
  489. [ 0.494715] RPC: Registered named UNIX socket transport module.
  490. [ 0.494717] RPC: Registered udp transport module.
  491. [ 0.494719] RPC: Registered tcp transport module.
  492. [ 0.494721] RPC: Registered tcp NFSv4.1 backchannel transport module.
  493. [ 0.494729] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
  494. [ 0.524022] PCI: CLS 64 bytes, default 64
  495. [ 0.524042] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
  496. [ 0.524045] software IO TLB [mem 0xa4801000-0xa8801000] (64MB) mapped at [ffff8800a4801000-ffff8800a8800fff]
  497. [ 0.524118] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
  498. [ 0.524121] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
  499. [ 0.524123] RAPL PMU: hw unit of domain package 2^-14 Joules
  500. [ 0.524125] RAPL PMU: hw unit of domain dram 2^-14 Joules
  501. [ 0.524127] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
  502. [ 0.524708] Scanning for low memory corruption every 60 seconds
  503. [ 0.524835] audit: initializing netlink subsys (disabled)
  504. [ 0.524856] audit: type=2000 audit(1511624093.523:1): state=initialized audit_enabled=0 res=1
  505. [ 0.525118] workingset: timestamp_bits=56 max_order=21 bucket_order=0
  506. [ 0.526254] NFS: Registering the id_resolver key type
  507. [ 0.526260] Key type id_resolver registered
  508. [ 0.526262] Key type id_legacy registered
  509. [ 0.526265] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  510. [ 0.526312] SELinux: Registering netfilter hooks
  511. [ 0.526988] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  512. [ 0.526992] io scheduler noop registered
  513. [ 0.526994] io scheduler deadline registered
  514. [ 0.527020] io scheduler cfq registered (default)
  515. [ 0.527022] io scheduler mq-deadline registered
  516. [ 0.527023] io scheduler kyber registered
  517. [ 0.527428] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  518. [ 0.527689] Non-volatile memory driver v1.3
  519. [ 0.527704] Linux agpgart interface v0.103
  520. [ 0.527734] efifb: probing for efifb
  521. [ 0.527743] efifb: framebuffer at 0xd0000000, using 3072k, total 3072k
  522. [ 0.527745] efifb: mode is 1024x768x32, linelength=4096, pages=1
  523. [ 0.527746] efifb: scrolling: redraw
  524. [ 0.527748] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
  525. [ 0.528793] Console: switching to colour frame buffer device 128x48
  526. [ 0.529773] fb0: EFI VGA frame buffer device
  527. [ 0.529835] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
  528. [ 0.529855] ACPI: Power Button [PWRB]
  529. [ 0.529880] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
  530. [ 0.529897] ACPI: Power Button [PWRF]
  531. [ 0.530201] Monitor-Mwait will be used to enter C-1 state
  532. [ 0.530207] Monitor-Mwait will be used to enter C-2 state
  533. [ 0.530969] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
  534. [ 0.531065] thermal LNXTHERM:00: registered as thermal_zone0
  535. [ 0.531079] ACPI: Thermal Zone [TZ00] (28 C)
  536. [ 0.531211] thermal LNXTHERM:01: registered as thermal_zone1
  537. [ 0.531224] ACPI: Thermal Zone [TZ01] (30 C)
  538. [ 0.531246] xenfs: not registering filesystem on non-xen platform
  539. [ 0.531431] [drm] Memory usable by graphics device = 2048M
  540. [ 0.531445] checking generic (d0000000 300000) vs hw (d0000000 10000000)
  541. [ 0.531446] fb: switching to inteldrmfb from EFI VGA
  542. [ 0.531465] Console: switching to colour dummy device 80x25
  543. [ 0.531505] [drm] Replacing VGA console driver
  544. [ 0.536999] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  545. [ 0.537002] [drm] Driver supports precise vblank timestamp query.
  546. [ 0.539155] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
  547. [ 0.541386] [drm] Initialized i915 1.6.0 20170403 for 0000:00:02.0 on minor 0
  548. [ 0.542164] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
  549. [ 0.542447] acpi device:62: registered as cooling_device13
  550. [ 0.542488] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
  551. [ 0.543734] loop: module loaded
  552. [ 0.543781] ahci 0000:00:1f.2: version 3.0
  553. [ 0.543891] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
  554. [ 0.543896] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
  555. [ 0.562371] scsi host0: ahci
  556. [ 0.562426] scsi host1: ahci
  557. [ 0.562487] scsi host2: ahci
  558. [ 0.562543] scsi host3: ahci
  559. [ 0.562589] scsi host4: ahci
  560. [ 0.562633] scsi host5: ahci
  561. [ 0.562650] ata1: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a100 irq 27
  562. [ 0.562654] ata2: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a180 irq 27
  563. [ 0.562657] ata3: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a200 irq 27
  564. [ 0.562660] ata4: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a280 irq 27
  565. [ 0.562664] ata5: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a300 irq 27
  566. [ 0.562667] ata6: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a380 irq 27
  567. [ 0.572814] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode
  568. [ 0.572820] ahci 0000:02:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
  569. [ 0.573082] scsi host6: ahci
  570. [ 0.573144] scsi host7: ahci
  571. [ 0.573202] scsi host8: ahci
  572. [ 0.573259] scsi host9: ahci
  573. [ 0.573293] ata7: SATA max UDMA/133 abar m2048@0xf7a40000 port 0xf7a40100 irq 28
  574. [ 0.573298] ata8: SATA max UDMA/133 abar m2048@0xf7a40000 port 0xf7a40180 irq 28
  575. [ 0.573302] ata9: SATA max UDMA/133 abar m2048@0xf7a40000 port 0xf7a40200 irq 28
  576. [ 0.573307] ata10: SATA max UDMA/133 abar m2048@0xf7a40000 port 0xf7a40280 irq 28
  577. [ 0.573408] ahci 0000:05:00.0: SSS flag set, parallel bus scan disabled
  578. [ 0.573439] ahci 0000:05:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
  579. [ 0.573445] ahci 0000:05:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
  580. [ 0.573607] scsi host10: ahci
  581. [ 0.573670] scsi host11: ahci
  582. [ 0.573699] ata11: SATA max UDMA/133 abar m512@0xf7800000 port 0xf7800100 irq 29
  583. [ 0.573704] ata12: SATA max UDMA/133 abar m512@0xf7800000 port 0xf7800180 irq 29
  584. [ 0.573763] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
  585. [ 0.573766] e100: Copyright(c) 1999-2006 Intel Corporation
  586. [ 0.573778] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
  587. [ 0.573781] e1000: Copyright (c) 1999-2006 Intel Corporation.
  588. [ 0.573793] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  589. [ 0.573795] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  590. [ 0.573904] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
  591. [ 0.651769] fbcon: inteldrmfb (fb0) is primary device
  592. [ 0.656096] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
  593. [ 0.701778] Console: switching to colour frame buffer device 320x90
  594. [ 0.718314] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
  595. [ 0.737871] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) d8:50:e6:52:84:b3
  596. [ 0.737892] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
  597. [ 0.737932] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
  598. [ 0.737966] sky2: driver version 1.30
  599. [ 0.738044] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  600. [ 0.738060] ehci-pci: EHCI PCI platform driver
  601. [ 0.738133] ehci-pci 0000:00:1a.0: EHCI Host Controller
  602. [ 0.738195] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
  603. [ 0.738225] ehci-pci 0000:00:1a.0: debug port 2
  604. [ 0.742128] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
  605. [ 0.742133] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c3c000
  606. [ 0.748974] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
  607. [ 0.749010] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  608. [ 0.749026] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  609. [ 0.749042] usb usb1: Product: EHCI Host Controller
  610. [ 0.749054] usb usb1: Manufacturer: Linux 4.12.12-gentoo ehci_hcd
  611. [ 0.749068] usb usb1: SerialNumber: 0000:00:1a.0
  612. [ 0.749165] hub 1-0:1.0: USB hub found
  613. [ 0.749180] hub 1-0:1.0: 2 ports detected
  614. [ 0.749304] ehci-pci 0000:00:1d.0: EHCI Host Controller
  615. [ 0.749368] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
  616. [ 0.749397] ehci-pci 0000:00:1d.0: debug port 2
  617. [ 0.753296] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
  618. [ 0.753301] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c3b000
  619. [ 0.759976] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
  620. [ 0.760010] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  621. [ 0.760026] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  622. [ 0.760042] usb usb2: Product: EHCI Host Controller
  623. [ 0.760054] usb usb2: Manufacturer: Linux 4.12.12-gentoo ehci_hcd
  624. [ 0.760067] usb usb2: SerialNumber: 0000:00:1d.0
  625. [ 0.760161] hub 2-0:1.0: USB hub found
  626. [ 0.760176] hub 2-0:1.0: 2 ports detected
  627. [ 0.760248] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  628. [ 0.760266] ohci-pci: OHCI PCI platform driver
  629. [ 0.760284] uhci_hcd: USB Universal Host Controller Interface driver
  630. [ 0.760313] usbcore: registered new interface driver usblp
  631. [ 0.760335] usbcore: registered new interface driver usb-storage
  632. [ 0.760364] i8042: PNP: No PS/2 controller found.
  633. [ 0.760424] mousedev: PS/2 mouse device common for all mice
  634. [ 0.760558] rtc_cmos 00:02: RTC can wake from S4
  635. [ 0.760666] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
  636. [ 0.760701] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
  637. [ 0.760801] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
  638. [ 0.761369] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
  639. [ 0.761395] intel_pstate: Intel P-state driver initializing
  640. [ 0.761490] EFI Variables Facility v0.08 2004-May-17
  641. [ 0.766988] hidraw: raw HID events driver (C) Jiri Kosina
  642. [ 0.767392] usbcore: registered new interface driver usbhid
  643. [ 0.767449] usbhid: USB HID core driver
  644. [ 0.768136] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
  645. [ 0.768410] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
  646. [ 0.768722] snd_hda_intel 0000:01:00.1: Force to non-snoop mode
  647. [ 0.768850] Netfilter messages via NETLINK v0.30.
  648. [ 0.769197] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
  649. [ 0.769340] ctnetlink v0.93: registering with nfnetlink.
  650. [ 0.769672] ip_tables: (C) 2000-2006 Netfilter Core Team
  651. [ 0.769762] Initializing XFRM netlink socket
  652. [ 0.770077] NET: Registered protocol family 10
  653. [ 0.770346] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops 0xffffffff81a8ec00)
  654. [ 0.770610] Segment Routing with IPv6
  655. [ 0.770650] ip6_tables: (C) 2000-2006 Netfilter Core Team
  656. [ 0.775117] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  657. [ 0.776341] NET: Registered protocol family 17
  658. [ 0.777482] Key type dns_resolver registered
  659. [ 0.778916] microcode: sig=0x306c3, pf=0x2, revision=0x9
  660. [ 0.780837] microcode: Microcode Update Driver: v2.2.
  661. [ 0.780932] registered taskstats version 1
  662. [ 0.783378] Magic number: 9:530:589
  663. [ 0.784317] console [netcon0] enabled
  664. [ 0.784571] random: fast init done
  665. [ 0.785195] snd_hda_codec_realtek hdaudioC1D0: ALC1150: SKU not ready 0x00000000
  666. [ 0.785741] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC1150: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
  667. [ 0.785741] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
  668. [ 0.785742] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
  669. [ 0.785743] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
  670. [ 0.785743] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x1e
  671. [ 0.785743] snd_hda_codec_realtek hdaudioC1D0: inputs:
  672. [ 0.785744] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
  673. [ 0.785745] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
  674. [ 0.785745] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
  675. [ 0.794122] netconsole: network logging started
  676. [ 0.794919] PM: Hibernation image not present or could not be loaded.
  677. [ 0.794920] ALSA device list:
  678. [ 0.795684] No soundcards found.
  679. [ 0.797100] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input3
  680. [ 0.797895] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input4
  681. [ 0.798689] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input5
  682. [ 0.799483] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input6
  683. [ 0.801849] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input7
  684. [ 0.802639] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input8
  685. [ 0.805356] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
  686. [ 0.806156] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
  687. [ 0.806922] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
  688. [ 0.808155] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
  689. [ 0.808931] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
  690. [ 0.809853] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
  691. [ 0.810623] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
  692. [ 0.811393] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
  693. [ 0.812224] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
  694. [ 0.813029] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
  695. [ 0.813824] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19
  696. [ 0.814618] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20
  697. [ 0.815430] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input21
  698. [ 0.869250] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  699. [ 0.870067] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  700. [ 0.871901] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  701. [ 0.873110] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  702. [ 0.875082] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  703. [ 0.877081] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170303/psargs-364)
  704. [ 0.878177] ata8: SATA link down (SStatus 0 SControl 300)
  705. [ 0.878587] ata11: SATA link down (SStatus 0 SControl 300)
  706. [ 0.881892] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT5._GTF] (Node ffff8802274c6528), AE_NOT_FOUND (20170303/psparse-543)
  707. [ 0.882649] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  708. [ 0.883863] ata6.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133
  709. [ 0.884620] ata6.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
  710. [ 0.885392] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170303/psargs-364)
  711. [ 0.886158] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff8802274c64b0), AE_NOT_FOUND (20170303/psparse-543)
  712. [ 0.887001] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170303/psargs-364)
  713. [ 0.887775] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT2._GTF] (Node ffff8802274c63c0), AE_NOT_FOUND (20170303/psparse-543)
  714. [ 0.888760] ata1.00: supports DRM functions and may not be fully accessible
  715. [ 0.890084] ata3.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133
  716. [ 0.891190] ata3.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
  717. [ 0.892512] ata4.00: NCQ Send/Recv Log not supported
  718. [ 0.893836] ata4.00: ATA-9: Samsung SSD 840 PRO Series, DXM05B0Q, max UDMA/133
  719. [ 0.895177] ata4.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
  720. [ 0.896520] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170303/psargs-364)
  721. [ 0.897864] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT5._GTF] (Node ffff8802274c6528), AE_NOT_FOUND (20170303/psparse-543)
  722. [ 0.898762] ata2.00: ATA-9: WDC WD30EFRX-68EUZN0, 80.00A80, max UDMA/133
  723. [ 0.900111] ata2.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
  724. [ 0.901490] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170303/psargs-364)
  725. [ 0.902845] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT2._GTF] (Node ffff8802274c63c0), AE_NOT_FOUND (20170303/psparse-543)
  726. [ 0.903703] ata5.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133
  727. [ 0.905148] ata5.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
  728. [ 0.906580] ata3.00: configured for UDMA/133
  729. [ 0.908005] ata1.00: disabling queued TRIM support
  730. [ 0.908006] ata1.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT02B6Q, max UDMA/133
  731. [ 0.909450] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
  732. [ 0.910894] ata6.00: configured for UDMA/133
  733. [ 0.912274] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170303/psargs-364)
  734. [ 0.913664] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff8802274c64b0), AE_NOT_FOUND (20170303/psparse-543)
  735. [ 0.914648] ata2.00: configured for UDMA/133
  736. [ 0.916091] ata4.00: NCQ Send/Recv Log not supported
  737. [ 0.916989] ata5.00: configured for UDMA/133
  738. [ 0.918487] ata4.00: configured for UDMA/133
  739. [ 0.919910] ata1.00: supports DRM functions and may not be fully accessible
  740. [ 0.921306] ata1.00: disabling queued TRIM support
  741. [ 0.921636] ata1.00: configured for UDMA/133
  742. [ 0.922755] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
  743. [ 0.923900] sd 0:0:0:0: Attached scsi generic sg0 type 0
  744. [ 0.924077] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
  745. [ 0.924101] sd 0:0:0:0: [sda] Write Protect is off
  746. [ 0.924102] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  747. [ 0.924157] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  748. [ 0.925552] sda: sda1 sda2 sda3 sda4 sda6
  749. [ 0.925883] sd 0:0:0:0: [sda] Attached SCSI disk
  750. [ 0.929941] scsi 1:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A80 PQ: 0 ANSI: 5
  751. [ 0.931171] sd 1:0:0:0: Attached scsi generic sg1 type 0
  752. [ 0.931213] sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
  753. [ 0.931214] sd 1:0:0:0: [sdb] 4096-byte physical blocks
  754. [ 0.931227] sd 1:0:0:0: [sdb] Write Protect is off
  755. [ 0.931228] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
  756. [ 0.931264] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  757. [ 0.936859] scsi 2:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5
  758. [ 0.938229] sd 2:0:0:0: Attached scsi generic sg2 type 0
  759. [ 0.938232] sd 2:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
  760. [ 0.938233] sd 2:0:0:0: [sdc] 4096-byte physical blocks
  761. [ 0.938238] sd 2:0:0:0: [sdc] Write Protect is off
  762. [ 0.938239] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
  763. [ 0.938247] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  764. [ 0.944409] scsi 3:0:0:0: Direct-Access ATA Samsung SSD 840 5B0Q PQ: 0 ANSI: 5
  765. [ 0.946058] ata4.00: Enabling discard_zeroes_data
  766. [ 0.946070] sd 3:0:0:0: Attached scsi generic sg3 type 0
  767. [ 0.949359] scsi 4:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5
  768. [ 0.949392] sd 3:0:0:0: [sdd] 500118192 512-byte logical blocks: (256 GB/238 GiB)
  769. [ 0.949400] sd 3:0:0:0: [sdd] Write Protect is off
  770. [ 0.949401] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
  771. [ 0.949416] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  772. [ 0.949485] ata4.00: Enabling discard_zeroes_data
  773. [ 0.949867] sdd: sdd1 sdd2 sdd3 sdd4 < sdd5 sdd6 >
  774. [ 0.950018] ata4.00: Enabling discard_zeroes_data
  775. [ 0.950112] sd 3:0:0:0: [sdd] Attached SCSI disk
  776. [ 0.957855] sd 4:0:0:0: Attached scsi generic sg4 type 0
  777. [ 0.957884] sd 4:0:0:0: [sde] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
  778. [ 0.957885] sd 4:0:0:0: [sde] 4096-byte physical blocks
  779. [ 0.957896] sd 4:0:0:0: [sde] Write Protect is off
  780. [ 0.957896] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
  781. [ 0.957912] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  782. [ 0.963638] scsi 5:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5
  783. [ 0.965006] sd 5:0:0:0: [sdf] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
  784. [ 0.965010] sd 5:0:0:0: Attached scsi generic sg5 type 0
  785. [ 0.967125] sd 5:0:0:0: [sdf] 4096-byte physical blocks
  786. [ 0.968144] sd 5:0:0:0: [sdf] Write Protect is off
  787. [ 0.969153] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
  788. [ 0.969169] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  789. [ 0.986744] sdc: sdc1 sdc9
  790. [ 0.988125] sd 2:0:0:0: [sdc] Attached SCSI disk
  791. [ 0.990493] sdb: sdb1 sdb9
  792. [ 0.991850] sd 1:0:0:0: [sdb] Attached SCSI disk
  793. [ 1.003917] sde: sde1 sde9
  794. [ 1.005854] sd 4:0:0:0: [sde] Attached SCSI disk
  795. [ 1.016708] sdf: sdf1 sdf9
  796. [ 1.018296] sd 5:0:0:0: [sdf] Attached SCSI disk
  797. [ 1.031997] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  798. [ 1.034881] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  799. [ 1.037420] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  800. [ 1.039234] ata9.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133
  801. [ 1.041872] ata9.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
  802. [ 1.044366] ata7.00: ATAPI: TSSTcorp CDDVDW SH-224DB, SB00, max UDMA/100
  803. [ 1.046606] ata10.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133
  804. [ 1.048570] ata10.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
  805. [ 1.050849] ata9.00: configured for UDMA/133
  806. [ 1.052789] ata7.00: configured for UDMA/100
  807. [ 1.054498] ata10.00: configured for UDMA/133
  808. [ 1.057440] scsi 6:0:0:0: CD-ROM TSSTcorp CDDVDW SH-224DB SB00 PQ: 0 ANSI: 5
  809. [ 1.063966] usb 1-1: new high-speed USB device number 2 using ehci-pci
  810. [ 1.071966] usb 2-1: new high-speed USB device number 2 using ehci-pci
  811. [ 1.086436] sr 6:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
  812. [ 1.087456] cdrom: Uniform CD-ROM driver Revision: 3.20
  813. [ 1.088517] sr 6:0:0:0: Attached scsi CD-ROM sr0
  814. [ 1.088566] sr 6:0:0:0: Attached scsi generic sg6 type 5
  815. [ 1.089695] scsi 8:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5
  816. [ 1.090842] sd 8:0:0:0: Attached scsi generic sg7 type 0
  817. [ 1.090867] sd 8:0:0:0: [sdg] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
  818. [ 1.090868] sd 8:0:0:0: [sdg] 4096-byte physical blocks
  819. [ 1.090877] sd 8:0:0:0: [sdg] Write Protect is off
  820. [ 1.090878] sd 8:0:0:0: [sdg] Mode Sense: 00 3a 00 00
  821. [ 1.090896] sd 8:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  822. [ 1.095706] scsi 9:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5
  823. [ 1.096859] sd 9:0:0:0: Attached scsi generic sg8 type 0
  824. [ 1.096887] sd 9:0:0:0: [sdh] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
  825. [ 1.096889] sd 9:0:0:0: [sdh] 4096-byte physical blocks
  826. [ 1.096903] sd 9:0:0:0: [sdh] Write Protect is off
  827. [ 1.096904] sd 9:0:0:0: [sdh] Mode Sense: 00 3a 00 00
  828. [ 1.096923] sd 9:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  829. [ 1.143865] sdh: sdh1 sdh9
  830. [ 1.145146] sd 9:0:0:0: [sdh] Attached SCSI removable disk
  831. [ 1.152232] sdg: sdg1 sdg9
  832. [ 1.153508] sd 8:0:0:0: [sdg] Attached SCSI removable disk
  833. [ 1.182334] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
  834. [ 1.183890] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  835. [ 1.185605] hub 1-1:1.0: USB hub found
  836. [ 1.187177] hub 1-1:1.0: 6 ports detected
  837. [ 1.191327] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
  838. [ 1.192423] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  839. [ 1.193707] hub 2-1:1.0: USB hub found
  840. [ 1.194952] hub 2-1:1.0: 8 ports detected
  841. [ 1.413529] ata12: SATA link down (SStatus 0 SControl 300)
  842. [ 1.415119] md: Waiting for all devices to be available before autodetect
  843. [ 1.416636] md: If you don't use raid, use raid=noautodetect
  844. [ 1.418332] md: Autodetecting RAID arrays.
  845. [ 1.420079] md: autorun ...
  846. [ 1.421789] md: ... autorun DONE.
  847. [ 1.425058] EXT4-fs (sda4): couldn't mount as ext3 due to feature incompatibilities
  848. [ 1.426925] EXT4-fs (sda4): couldn't mount as ext2 due to feature incompatibilities
  849. [ 1.429897] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
  850. [ 1.430779] VFS: Mounted root (ext4 filesystem) readonly on device 8:4.
  851. [ 1.432266] devtmpfs: mounted
  852. [ 1.433790] Freeing unused kernel memory: 1364K
  853. [ 1.434642] Write protecting the kernel read-only data: 14336k
  854. [ 1.435610] Freeing unused kernel memory: 248K
  855. [ 1.438078] Freeing unused kernel memory: 1032K
  856. [ 1.480768] kbd_mode (1658) used greatest stack depth: 13536 bytes left
  857. [ 1.497825] loadkeys (1659) used greatest stack depth: 13504 bytes left
  858. [ 1.498694] init-early.sh (1657) used greatest stack depth: 13056 bytes left
  859. [ 1.567943] tsc: Refined TSC clocksource calibration: 3499.996 MHz
  860. [ 1.568815] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x32734d20948, max_idle_ns: 440795306379 ns
  861. [ 1.704441] gendepends.sh (1792) used greatest stack depth: 12992 bytes left
  862. [ 1.864595] random: crng init done
  863. [ 2.054488] udevd[2100]: starting version 3.1.5
  864. [ 2.064601] udevd[2100]: RUN{builtin}: 'uaccess' unknown /lib64/udev/rules.d/73-seat-late.rules:15
  865. [ 2.122545] e1000e 0000:00:19.0 eno1: renamed from eth0
  866. [ 2.126539] xhci_hcd 0000:00:14.0: xHCI Host Controller
  867. [ 2.126592] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
  868. [ 2.127664] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
  869. [ 2.127667] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
  870. [ 2.127750] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  871. [ 2.127751] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  872. [ 2.127752] usb usb3: Product: xHCI Host Controller
  873. [ 2.127753] usb usb3: Manufacturer: Linux 4.12.12-gentoo xhci-hcd
  874. [ 2.127753] usb usb3: SerialNumber: 0000:00:14.0
  875. [ 2.127822] hub 3-0:1.0: USB hub found
  876. [ 2.127843] hub 3-0:1.0: 14 ports detected
  877. [ 2.129339] xhci_hcd 0000:00:14.0: xHCI Host Controller
  878. [ 2.129361] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
  879. [ 2.129412] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
  880. [ 2.129413] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  881. [ 2.129413] usb usb4: Product: xHCI Host Controller
  882. [ 2.129414] usb usb4: Manufacturer: Linux 4.12.12-gentoo xhci-hcd
  883. [ 2.129414] usb usb4: SerialNumber: 0000:00:14.0
  884. [ 2.129478] hub 4-0:1.0: USB hub found
  885. [ 2.129492] hub 4-0:1.0: 6 ports detected
  886. [ 2.132387] [drm] radeon kernel modesetting enabled.
  887. [ 2.132424] radeon 0000:01:00.0: enabling device (0000 -> 0003)
  888. [ 2.132516] [drm] initializing kernel modesetting (TAHITI 0x1002:0x6798 0x148C:0x3001 0x00).
  889. [ 2.144779] ath9k 0000:04:00.0: enabling device (0000 -> 0002)
  890. [ 2.171558] ath: EEPROM regdomain: 0x60
  891. [ 2.171558] ath: EEPROM indicates we should expect a direct regpair map
  892. [ 2.171559] ath: Country alpha2 being used: 00
  893. [ 2.171560] ath: Regpair used: 0x60
  894. [ 2.172076] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  895. [ 2.172308] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffc90002a80000, irq=17
  896. [ 2.184659] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20170303/utaddress-247)
  897. [ 2.184665] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  898. [ 2.184680] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170303/utaddress-247)
  899. [ 2.184682] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  900. [ 2.184683] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170303/utaddress-247)
  901. [ 2.184688] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170303/utaddress-247)
  902. [ 2.184690] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  903. [ 2.184690] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170303/utaddress-247)
  904. [ 2.184695] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170303/utaddress-247)
  905. [ 2.184697] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  906. [ 2.184697] lpc_ich: Resource conflict(s) found affecting gpio_ich
  907. [ 2.259292] spl: loading out-of-tree module taints kernel.
  908. [ 2.260095] SPL: Loaded module v0.7.3-r0-gentoo
  909. [ 2.260575] znvpair: module license 'CDDL' taints kernel.
  910. [ 2.260575] Disabling lock debugging due to kernel taint
  911. [ 2.492991] usb 3-3: new high-speed USB device number 2 using xhci_hcd
  912. [ 3.105044] clocksource: Switched to clocksource tsc
  913. [ 3.105050] ATOM BIOS: Tahiti
  914. [ 3.105070] [drm] GPU not posted. posting now...
  915. [ 3.108662] udevd[2101]: RUN{builtin}: 'uaccess' unknown /lib64/udev/rules.d/73-seat-late.rules:15
  916. [ 3.115927] [drm] Changing default dispclk from 500Mhz to 600Mhz
  917. [ 3.115939] radeon 0000:01:00.0: VRAM: 3072M 0x0000000000000000 - 0x00000000BFFFFFFF (3072M used)
  918. [ 3.115940] radeon 0000:01:00.0: GTT: 2048M 0x00000000C0000000 - 0x000000013FFFFFFF
  919. [ 3.115949] [drm] Detected VRAM RAM=3072M, BAR=256M
  920. [ 3.115950] [drm] RAM width 384bits DDR
  921. [ 3.115998] [TTM] Zone kernel: Available graphics memory: 3925484 kiB
  922. [ 3.115999] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
  923. [ 3.115999] [TTM] Initializing pool allocator
  924. [ 3.116003] [TTM] Initializing DMA pool allocator
  925. [ 3.116022] [drm] radeon: 3072M of VRAM memory ready
  926. [ 3.116022] [drm] radeon: 2048M of GTT memory ready.
  927. [ 3.116031] [drm] Loading tahiti Microcode
  928. [ 3.119380] [drm] Internal thermal controller with fan control
  929. [ 3.119417] [drm] probing gen 2 caps for device 8086:c01 = 261ac83/e
  930. [ 3.124212] [drm] radeon: dpm initialized
  931. [ 3.126920] [drm] Found VCE firmware/feedback version 50.0.1 / 17!
  932. [ 3.126938] [drm] GART: num cpu pages 524288, num gpu pages 524288
  933. [ 3.127965] [drm] probing gen 2 caps for device 8086:c01 = 261ac83/e
  934. [ 3.127967] [drm] PCIE gen 3 link speeds already enabled
  935. [ 3.130744] [drm] PCIE GART of 2048M enabled (table at 0x00000000001D6000).
  936. [ 3.130866] radeon 0000:01:00.0: WB enabled
  937. [ 3.130868] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000c0000c00 and cpu addr 0xffff88021bf6ec00
  938. [ 3.130870] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x00000000c0000c04 and cpu addr 0xffff88021bf6ec04
  939. [ 3.130871] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x00000000c0000c08 and cpu addr 0xffff88021bf6ec08
  940. [ 3.130872] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x00000000c0000c0c and cpu addr 0xffff88021bf6ec0c
  941. [ 3.130873] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x00000000c0000c10 and cpu addr 0xffff88021bf6ec10
  942. [ 3.131090] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90009c35a18
  943. [ 3.151222] radeon 0000:01:00.0: fence driver on ring 6 use gpu addr 0x00000000c0000c18 and cpu addr 0xffff88021bf6ec18
  944. [ 3.151223] radeon 0000:01:00.0: fence driver on ring 7 use gpu addr 0x00000000c0000c1c and cpu addr 0xffff88021bf6ec1c
  945. [ 3.151224] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  946. [ 3.151225] [drm] Driver supports precise vblank timestamp query.
  947. [ 3.151225] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
  948. [ 3.151248] radeon 0000:01:00.0: radeon: using MSI.
  949. [ 3.151265] [drm] radeon: irq initialized.
  950. [ 3.245766] udevd (2130) used greatest stack depth: 12240 bytes left
  951. [ 3.247899] ath9k 0000:04:00.0 wlp4s0: renamed from wlan0
  952. [ 3.258693] usb 3-3: New USB device found, idVendor=174c, idProduct=2074
  953. [ 3.258695] usb 3-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
  954. [ 3.258696] usb 3-3: Product: ASM107x
  955. [ 3.258697] usb 3-3: Manufacturer: Asmedia
  956. [ 3.258698] usb 3-3: SerialNumber: 00000000A001
  957. [ 3.259045] hub 3-3:1.0: USB hub found
  958. [ 3.259203] hub 3-3:1.0: 4 ports detected
  959. [ 3.295555] [drm] ring test on 0 succeeded in 1 usecs
  960. [ 3.295558] [drm] ring test on 1 succeeded in 1 usecs
  961. [ 3.295561] [drm] ring test on 2 succeeded in 1 usecs
  962. [ 3.295566] [drm] ring test on 3 succeeded in 3 usecs
  963. [ 3.295570] [drm] ring test on 4 succeeded in 2 usecs
  964. [ 3.360994] usb 4-3: new SuperSpeed USB device number 2 using xhci_hcd
  965. [ 3.374668] usb 4-3: New USB device found, idVendor=174c, idProduct=3074
  966. [ 3.374670] usb 4-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
  967. [ 3.374670] usb 4-3: Product: ASM107x
  968. [ 3.374671] usb 4-3: Manufacturer: Asmedia
  969. [ 3.374671] usb 4-3: SerialNumber: 00000000A001
  970. [ 3.375336] hub 4-3:1.0: USB hub found
  971. [ 3.375451] hub 4-3:1.0: 4 ports detected
  972. [ 3.482765] [drm] ring test on 5 succeeded in 1 usecs
  973. [ 3.482768] [drm] UVD initialized successfully.
  974. [ 3.592835] [drm] ring test on 6 succeeded in 21 usecs
  975. [ 3.592843] [drm] ring test on 7 succeeded in 3 usecs
  976. [ 3.592843] [drm] VCE initialized successfully.
  977. [ 3.593012] [drm] ib test on ring 0 succeeded in 0 usecs
  978. [ 3.593030] [drm] ib test on ring 1 succeeded in 0 usecs
  979. [ 3.593045] [drm] ib test on ring 2 succeeded in 0 usecs
  980. [ 3.593061] [drm] ib test on ring 3 succeeded in 0 usecs
  981. [ 3.593076] [drm] ib test on ring 4 succeeded in 0 usecs
  982. [ 3.656890] usb 3-4: new full-speed USB device number 3 using xhci_hcd
  983. [ 3.892061] usb 3-4: string descriptor 0 read error: -22
  984. [ 3.892063] usb 3-4: New USB device found, idVendor=0b05, idProduct=17d0
  985. [ 3.892064] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  986. [ 3.974883] usb 3-3.4: new full-speed USB device number 4 using xhci_hcd
  987. [ 4.077700] usb 3-3.4: New USB device found, idVendor=045e, idProduct=07b2
  988. [ 4.077701] usb 3-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  989. [ 4.077702] usb 3-3.4: Product: Microsoft® 2.4GHz Transceiver v8.0
  990. [ 4.077703] usb 3-3.4: Manufacturer: Microsoft
  991. [ 4.082185] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.4/3-3.4:1.0/0003:045E:07B2.0001/input/input22
  992. [ 4.135033] hid-generic 0003:045E:07B2.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-0000:00:14.0-3.4/input0
  993. [ 4.139211] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.4/3-3.4:1.1/0003:045E:07B2.0002/input/input23
  994. [ 4.139356] hid-generic 0003:045E:07B2.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-0000:00:14.0-3.4/input1
  995. [ 4.144959] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.4/3-3.4:1.2/0003:045E:07B2.0003/input/input24
  996. [ 4.198080] hid-generic 0003:045E:07B2.0003: input,hiddev96,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-0000:00:14.0-3.4/input2
  997. [ 4.271925] [drm] ib test on ring 5 succeeded
  998. [ 4.427389] ZFS: Loaded module v0.7.3-r0-gentoo, ZFS pool version 5000, ZFS filesystem version 5
  999. [ 4.509255] EXT4-fs (sda4): re-mounted. Opts: (null)
  1000. [ 4.549114] Adding 8000508k swap on /dev/sda6. Priority:-1 extents:1 across:8000508k SS
  1001. [ 4.775907] [drm] ib test on ring 6 succeeded
  1002. [ 5.279892] [drm] ib test on ring 7 succeeded
  1003. [ 5.280115] [drm] Radeon Display Connectors
  1004. [ 5.280115] [drm] Connector 0:
  1005. [ 5.280116] [drm] DP-2
  1006. [ 5.280116] [drm] HPD5
  1007. [ 5.280117] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
  1008. [ 5.280117] [drm] Encoders:
  1009. [ 5.280117] [drm] DFP1: INTERNAL_UNIPHY2
  1010. [ 5.280118] [drm] Connector 1:
  1011. [ 5.280118] [drm] DP-3
  1012. [ 5.280118] [drm] HPD4
  1013. [ 5.280119] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
  1014. [ 5.280119] [drm] Encoders:
  1015. [ 5.280120] [drm] DFP2: INTERNAL_UNIPHY2
  1016. [ 5.280120] [drm] Connector 2:
  1017. [ 5.280120] [drm] HDMI-A-4
  1018. [ 5.280120] [drm] HPD1
  1019. [ 5.280121] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
  1020. [ 5.280122] [drm] Encoders:
  1021. [ 5.280122] [drm] DFP3: INTERNAL_UNIPHY1
  1022. [ 5.280122] [drm] Connector 3:
  1023. [ 5.280122] [drm] DVI-I-1
  1024. [ 5.280123] [drm] HPD3
  1025. [ 5.280123] [drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c
  1026. [ 5.280124] [drm] Encoders:
  1027. [ 5.280124] [drm] DFP4: INTERNAL_UNIPHY
  1028. [ 5.280124] [drm] CRT1: INTERNAL_KLDSCP_DAC1
  1029. [ 5.387577] snd_hda_codec_hdmi hdaudioC2D0: HDMI ATI/AMD: no speaker allocation for ELD
  1030. [ 5.397768] [drm] fb mappable at 0xE05D8000
  1031. [ 5.397768] [drm] vram apper at 0xE0000000
  1032. [ 5.397768] [drm] size 14745600
  1033. [ 5.397769] [drm] fb depth is 24
  1034. [ 5.397769] [drm] pitch is 10240
  1035. [ 5.397820] radeon 0000:01:00.0: fb1: radeondrmfb frame buffer device
  1036. [ 5.397852] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 1
  1037. [ 5.398259] udevd (2132) used greatest stack depth: 11872 bytes left
  1038. [ 5.687907] snd_hda_codec_hdmi hdaudioC2D0: HDMI ATI/AMD: no speaker allocation for ELD
  1039. [ 5.991890] snd_hda_codec_hdmi hdaudioC2D0: HDMI ATI/AMD: no speaker allocation for ELD
  1040. [ 6.295890] snd_hda_codec_hdmi hdaudioC2D0: HDMI ATI/AMD: no speaker allocation for ELD
  1041. [ 7.544378] zpool (2725) used greatest stack depth: 11744 bytes left
  1042. [ 10.071860] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
  1043. [ 10.248139] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  1044. [ 10.267929] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
  1045. [ 10.268049] NFSD: starting 90-second grace period (net ffffffff81ef2cc0)
  1046. [ 10.373093] elogind[5053]: New seat seat0.
  1047. [ 10.373424] elogind[5053]: Watching system buttons on /dev/input/event1 (Power Button)
  1048. [ 10.392824] elogind[5053]: Watching system buttons on /dev/input/event0 (Power Button)
  1049. [ 10.392874] elogind[5053]: Watching system buttons on /dev/input/event22 (Microsoft Microsoft® 2.4GHz Transceiver v8.0)
  1050. [ 10.392915] elogind[5053]: Watching system buttons on /dev/input/event24 (Microsoft Microsoft® 2.4GHz Transceiver v8.0)
  1051. [ 10.431614] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  1052. [ 10.443531] br0: port 1(eno1) entered blocking state
  1053. [ 10.443531] br0: port 1(eno1) entered disabled state
  1054. [ 10.443560] device eno1 entered promiscuous mode
  1055. [ 10.447093] device br0 entered promiscuous mode
  1056. [ 10.448136] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
  1057. [ 10.466587] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
  1058. [ 10.724077] elogind[5053]: New session c1 of user gdm.
  1059. [ 10.942752] radeon_dp_aux_transfer_native: 158 callbacks suppressed
  1060. [ 13.321686] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
  1061. [ 13.321716] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
  1062. [ 13.321745] br0: port 1(eno1) entered blocking state
  1063. [ 13.321746] br0: port 1(eno1) entered forwarding state
  1064. [ 13.321795] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
  1065. [ 18.763977] elogind[5053]: New session 1 of user richard.
  1066. [ 19.156574] radeon_dp_aux_transfer_native: 158 callbacks suppressed
  1067. [ 20.879672] rfkill: input handler disabled
  1068. [ 222.155438] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead.
  1069.  
Powered by spacepaste. Paste removal.