spacepaste

Paste details

reply | raw

  1.  
  2. [ 0.000000] Command line: auto BOOT_IMAGE=gentoo ro root=842 root=/dev/sde2
  3. [ 0.000000] Kernel command line: auto BOOT_IMAGE=gentoo ro root=842 root=/dev/sde2
  4. [ 7.153943] sd 1:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
  5. [ 7.153946] sd 1:0:0:0: [sda] 4096-byte physical blocks
  6. [ 7.154038] sd 1:0:0:0: [sda] Write Protect is off
  7. [ 7.154040] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
  8. [ 7.154066] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  9. [ 7.154870] sd 3:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
  10. [ 7.154871] sd 4:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
  11. [ 7.154873] sd 4:0:0:0: [sdd] 4096-byte physical blocks
  12. [ 7.154873] sd 3:0:0:0: [sdc] 4096-byte physical blocks
  13. [ 7.154902] sd 2:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
  14. [ 7.154904] sd 2:0:0:0: [sdb] 4096-byte physical blocks
  15. [ 7.154930] sd 4:0:0:0: [sdd] Write Protect is off
  16. [ 7.154933] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
  17. [ 7.154958] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  18. [ 7.154992] sd 3:0:0:0: [sdc] Write Protect is off
  19. [ 7.154994] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
  20. [ 7.155081] sd 2:0:0:0: [sdb] Write Protect is off
  21. [ 7.155083] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
  22. [ 7.155119] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  23. [ 7.155132] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  24. [ 7.155729] sd 5:0:0:0: [sde] 488397168 512-byte logical blocks: (250 GB/233 GiB)
  25. [ 7.155786] sd 5:0:0:0: [sde] Write Protect is off
  26. [ 7.155788] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
  27. [ 7.155812] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  28. [ 7.198439] sde: sde1 sde2
  29. [ 7.198935] sd 5:0:0:0: [sde] Attached SCSI disk
  30. [ 7.210662] sdb: sdb1
  31. [ 7.211009] sd 2:0:0:0: [sdb] Attached SCSI disk
  32. [ 7.211991] sdc: sdc1
  33. [ 7.212364] sd 3:0:0:0: [sdc] Attached SCSI disk
  34. [ 7.214629] sda: sda1 sda2
  35. [ 7.215092] sd 1:0:0:0: [sda] Attached SCSI disk
  36. [ 7.217968] sdd: sdd1
  37. [ 7.218406] sd 4:0:0:0: [sdd] Attached SCSI disk
  38. [ 7.224398] sd 1:0:0:0: Attached scsi generic sg0 type 0
  39. [ 7.224452] sd 2:0:0:0: Attached scsi generic sg1 type 0
  40. [ 7.224501] sd 3:0:0:0: Attached scsi generic sg2 type 0
  41. [ 7.224553] sd 4:0:0:0: Attached scsi generic sg3 type 0
  42. [ 7.224600] sd 5:0:0:0: Attached scsi generic sg4 type 0
  43. [ 9.501124] EXT2-fs (sde2): error: couldn't mount because of unsupported optional features (2c0)
  44. [ 9.501326] EXT4-fs (sde2): couldn't mount as ext3 due to feature incompatibilities
  45. [ 9.529112] EXT4-fs (sde2): mounted filesystem with ordered data mode. Opts: (null)
  46. [ 14.382956] md: bind<sdb1>
  47. [ 14.384310] md: sdc1 has same UUID but different superblock to sdb1
  48. [ 14.384312] md: sdc1 has different UUID to sdb1
  49. [ 14.384313] md: export_rdev(sdc1)
  50. [ 14.385435] md: sdd1 has same UUID but different superblock to sdb1
  51. [ 14.385436] md: sdd1 has different UUID to sdb1
  52. [ 14.385437] md: export_rdev(sdd1)
  53. [ 14.471672] md: sdd1 has same UUID but different superblock to sdb1
  54. [ 14.471675] md: sdd1 has different UUID to sdb1
  55. [ 14.471677] md: export_rdev(sdd1)
  56. [ 14.471906] md: sdc1 has same UUID but different superblock to sdb1
  57. [ 14.471908] md: sdc1 has different UUID to sdb1
  58. [ 14.471910] md: export_rdev(sdc1)
  59. [ 14.473325] md/raid:md1: device sdb1 operational as raid disk 0
  60. [ 14.473712] disk 0, o:1, dev:sdb1
  61. [ 16.090173] EXT4-fs (sde2): re-mounted. Opts: data=ordered
  62.  
Powered by spacepaste. Paste removal.