spacepaste

Paste details

reply | raw

  1.  
  2. [ 0.000000] Linux version 4.4.39-gentoo (root@nightheron) (gcc version 4.9.4 (Gentoo 4.9.4 p1.0, pie-0.6.4) ) #1 SMP Thu Jan 19 07:14:43 UTC 2017
  3. [ 0.000000] Command line: root=/dev/ram0 init=/linuxrc dokeymap looptype=squashfs loop=/image.squashfs cdroot initrd=gentoo.igz vga=791 BOOT_IMAGE=gentoo nodhcp
  4. [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
  5. [ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
  6. [ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
  7. [ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
  8. [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
  9. [ 0.000000] x86/fpu: Using 'eager' FPU context switches.
  10. [ 0.000000] e820: BIOS-provided physical RAM map:
  11. [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
  12. [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
  13. [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
  14. [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000efffefff] usable
  15. [ 0.000000] BIOS-e820: [mem 0x00000000effff000-0x00000000efffffff] reserved
  16. [ 0.000000] BIOS-e820: [mem 0x00000000fc000000-0x00000000ffffffff] reserved
  17. [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000018f7fffff] usable
  18. [ 0.000000] NX (Execute Disable) protection: active
  19. [ 0.000000] SMBIOS 2.4 present.
  20. [ 0.000000] DMI: Xen HVM domU, BIOS 4.4.1 09/08/2016
  21. [ 0.000000] Hypervisor detected: Xen
  22. [ 0.000000] Xen version 4.4.
  23. [ 0.000000] Xen Platform PCI: I/O protocol version 1
  24. [ 0.000000] Netfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated NICs.
  25. [ 0.000000] Blkfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated disks.
  26. You might have to change the root device
  27. from /dev/hd[a-d] to /dev/xvd[a-d]
  28. in your root= kernel command line option
  29. [ 0.000000] HVMOP_pagetable_dying not supported
  30. [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
  31. [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
  32. [ 0.000000] e820: last_pfn = 0x18f800 max_arch_pfn = 0x400000000
  33. [ 0.000000] MTRR default type: write-back
  34. [ 0.000000] MTRR fixed ranges enabled:
  35. [ 0.000000]  00000-9FFFF write-back
  36. [ 0.000000]  A0000-BFFFF write-combining
  37. [ 0.000000]  C0000-FFFFF write-back
  38. [ 0.000000] MTRR variable ranges enabled:
  39. [ 0.000000]  0 base 0000F0000000 mask 3FFFF8000000 uncachable
  40. [ 0.000000]  1 base 0000F8000000 mask 3FFFFC000000 uncachable
  41. [ 0.000000]  2 disabled
  42. [ 0.000000]  3 disabled
  43. [ 0.000000]  4 disabled
  44. [ 0.000000]  5 disabled
  45. [ 0.000000]  6 disabled
  46. [ 0.000000]  7 disabled
  47. [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
  48. [ 0.000000] e820: last_pfn = 0xeffff max_arch_pfn = 0x400000000
  49. [ 0.000000] found SMP MP-table at [mem 0x000f0f10-0x000f0f1f] mapped at [ffff8800000f0f10]
  50. [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
  51. [ 0.000000] BRK [0x01a0a000, 0x01a0afff] PGTABLE
  52. [ 0.000000] BRK [0x01a0b000, 0x01a0bfff] PGTABLE
  53. [ 0.000000] BRK [0x01a0c000, 0x01a0cfff] PGTABLE
  54. [ 0.000000] BRK [0x01a0d000, 0x01a0dfff] PGTABLE
  55. [ 0.000000] BRK [0x01a0e000, 0x01a0efff] PGTABLE
  56. [ 0.000000] BRK [0x01a0f000, 0x01a0ffff] PGTABLE
  57. [ 0.000000] RAMDISK: [mem 0x7fba3000-0x7fffefff]
  58. [ 0.000000] ACPI: Early table checksum verification disabled
  59. [ 0.000000] ACPI: RSDP 0x00000000000F0E60 000024 (v02 Xen )
  60. [ 0.000000] ACPI: XSDT 0x00000000FC009FC0 000054 (v01 Xen HVM 00000000 HVML 00000000)
  61. [ 0.000000] ACPI: FACP 0x00000000FC0098F0 0000F4 (v04 Xen HVM 00000000 HVML 00000000)
  62. [ 0.000000] ACPI: DSDT 0x00000000FC0012A0 0085CD (v02 Xen HVM 00000000 INTL 20140926)
  63. [ 0.000000] ACPI: FACS 0x00000000FC001260 000040
  64. [ 0.000000] ACPI: FACS 0x00000000FC001260 000040
  65. [ 0.000000] ACPI: APIC 0x00000000FC0099F0 000460 (v02 Xen HVM 00000000 HVML 00000000)
  66. [ 0.000000] ACPI: HPET 0x00000000FC009ED0 000038 (v01 Xen HVM 00000000 HVML 00000000)
  67. [ 0.000000] ACPI: WAET 0x00000000FC009F10 000028 (v01 Xen HVM 00000000 HVML 00000000)
  68. [ 0.000000] ACPI: SSDT 0x00000000FC009F40 000031 (v02 Xen HVM 00000000 INTL 20140926)
  69. [ 0.000000] ACPI: SSDT 0x00000000FC009F80 000031 (v02 Xen HVM 00000000 INTL 20140926)
  70. [ 0.000000] ACPI: Local APIC address 0xfee00000
  71. [ 0.000000] Zone ranges:
  72. [ 0.000000]  DMA [mem 0x0000000000001000-0x0000000000ffffff]
  73. [ 0.000000]  DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
  74. [ 0.000000]  Normal [mem 0x0000000100000000-0x000000018f7fffff]
  75. [ 0.000000] Movable zone start for each node
  76. [ 0.000000] Early memory node ranges
  77. [ 0.000000]  node 0: [mem 0x0000000000001000-0x000000000009efff]
  78. [ 0.000000]  node 0: [mem 0x0000000000100000-0x00000000efffefff]
  79. [ 0.000000]  node 0: [mem 0x0000000100000000-0x000000018f7fffff]
  80. [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000018f7fffff]
  81. [ 0.000000] On node 0 totalpages: 1570717
  82. [ 0.000000]  DMA zone: 56 pages used for memmap
  83. [ 0.000000]  DMA zone: 21 pages reserved
  84. [ 0.000000]  DMA zone: 3998 pages, LIFO batch:0
  85. [ 0.000000]  DMA32 zone: 13384 pages used for memmap
  86. [ 0.000000]  DMA32 zone: 978943 pages, LIFO batch:31
  87. [ 0.000000]  Normal zone: 8036 pages used for memmap
  88. [ 0.000000]  Normal zone: 587776 pages, LIFO batch:31
  89. [ 0.000000] ACPI: PM-Timer IO Port: 0xb008
  90. [ 0.000000] ACPI: Local APIC address 0xfee00000
  91. [ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47
  92. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  93. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
  94. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
  95. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
  96. [ 0.000000] ACPI: IRQ0 used by override.
  97. [ 0.000000] ACPI: IRQ5 used by override.
  98. [ 0.000000] ACPI: IRQ9 used by override.
  99. [ 0.000000] ACPI: IRQ10 used by override.
  100. [ 0.000000] ACPI: IRQ11 used by override.
  101. [ 0.000000] Using ACPI (MADT) for SMP configuration information
  102. [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
  103. [ 0.000000] smpboot: 128 Processors exceeds NR_CPUS limit of 64
  104. [ 0.000000] smpboot: Allowing 64 CPUs, 62 hotplug CPUs
  105. [ 0.000000] e820: [mem 0xf0000000-0xfbffffff] available for PCI devices
  106. [ 0.000000] Booting paravirtualized kernel on Xen HVM
  107. [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  108. [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:64 nr_node_ids:1
  109. [ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88018e600000 s89752 r8192 d29032 u131072
  110. [ 0.000000] pcpu-alloc: s89752 r8192 d29032 u131072 alloc=1*2097152
  111. [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
  112. [ 0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
  113. [ 0.000000] pcpu-alloc: [0] 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47
  114. [ 0.000000] pcpu-alloc: [0] 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63
  115. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1549220
  116. [ 0.000000] Kernel command line: root=/dev/ram0 init=/linuxrc dokeymap looptype=squashfs loop=/image.squashfs cdroot initrd=gentoo.igz vga=791 BOOT_IMAGE=gentoo nodhcp
  117. [ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes
  118. [ 0.000000] log_buf_len total cpu_extra contributions: 258048 bytes
  119. [ 0.000000] log_buf_len min size: 262144 bytes
  120. [ 0.000000] log_buf_len: 524288 bytes
  121. [ 0.000000] early log buf free: 254188(96%)
  122. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  123. [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
  124. [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
  125. [ 0.000000] Memory: 6093000K/6282868K available (4786K kernel code, 478K rwdata, 1808K rodata, 912K init, 660K bss, 189868K reserved, 0K cma-reserved)
  126. [ 0.000000] Hierarchical RCU implementation.
  127. [ 0.000000]  Build-time adjustment of leaf fanout to 64.
  128. [ 0.000000] NR_IRQS:4352 nr_irqs:1344 16
  129. [ 0.000000] xen:events: Using FIFO-based ABI
  130. [ 0.000000] xen:events: Xen HVM callback vector for event delivery is enabled
  131. [ 0.000000] Console: colour dummy device 80x25
  132. [ 0.000000] console [tty0] enabled
  133. [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 30580167144 ns
  134. [ 0.000000] hpet clockevent registered
  135. [ 0.000000] tsc: Detected 3500.120 MHz processor
  136. [ 0.020000] Calibrating delay loop (skipped), value calculated using timer frequency.. 7000.24 BogoMIPS (lpj=35001200)
  137. [ 0.020000] pid_max: default: 65536 minimum: 512
  138. [ 0.020000] ACPI: Core revision 20150930
  139. [ 0.020000] ACPI: 3 ACPI AML tables successfully acquired and loaded
  140. [ 0.020000] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
  141. [ 0.020000] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
  142. [ 0.020000] CPU: Physical Processor ID: 0
  143. [ 0.020000] CPU: Processor Core ID: 0
  144. [ 0.020000] mce: CPU supports 2 MCE banks
  145. [ 0.020000] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
  146. [ 0.020000] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
  147. [ 0.020000] Freeing SMP alternatives memory: 24K (ffffffff8195d000 - ffffffff81963000)
  148. [ 0.020000] x2apic: IRQ remapping doesn't support X2APIC mode
  149. [ 0.020000] Switched APIC routing to physical flat.
  150. [ 0.020000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
  151. [ 0.117039] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
  152. [ 0.117051] Xen: using vcpuop timer interface
  153. [ 0.117061] installing Xen timer for CPU 0
  154. [ 0.117112] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-1650 v3 @ 3.50GHz (family: 0x6, model: 0x3f, stepping: 0x2)
  155. [ 0.117167] Performance Events: unsupported p6 CPU model 63 no PMU driver, software events only.
  156. [ 0.117643] installing Xen timer for CPU 1
  157. [ 0.117691] x86: Booting SMP configuration:
  158. [ 0.117693] .... node #0, CPUs: #1
  159. [ 0.120000] x86: Booted up 1 node, 2 CPUs
  160. [ 0.120000] smpboot: Total of 2 processors activated (14000.48 BogoMIPS)
  161. [ 0.120000] devtmpfs: initialized
  162. [ 0.120000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  163. [ 0.120000] NET: Registered protocol family 16
  164. [ 0.140017] cpuidle: using governor ladder
  165. [ 0.170013] cpuidle: using governor menu
  166. [ 0.170118] ACPI: bus type PCI registered
  167. [ 0.170530] dca service started, version 1.12.1
  168. [ 0.170715] PCI: Using configuration type 1 for base access
  169. [ 0.200463] ACPI: Added _OSI(Module Device)
  170. [ 0.200468] ACPI: Added _OSI(Processor Device)
  171. [ 0.200470] ACPI: Added _OSI(3.0 _SCP Extensions)
  172. [ 0.200472] ACPI: Added _OSI(Processor Aggregator Device)
  173. [ 0.201193] xen: --> pirq=16 -> irq=9 (gsi=9)
  174. [ 0.203881] ACPI: Interpreter enabled
  175. [ 0.203887] ACPI: (supports S0 S5)
  176. [ 0.203889] ACPI: Using IOAPIC for interrupt routing
  177. [ 0.203905] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
  178. [ 0.207937] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
  179. [ 0.207943] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
  180. [ 0.207947] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
  181. [ 0.207951] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
  182. [ 0.207991] PCI host bridge to bus 0000:00
  183. [ 0.207994] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
  184. [ 0.207996] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
  185. [ 0.207999] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
  186. [ 0.208001] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfbffffff window]
  187. [ 0.208003] pci_bus 0000:00: root bus resource [bus 00-ff]
  188. [ 0.208231] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
  189. [ 0.209320] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
  190. [ 0.210586] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
  191. [ 0.214960] pci 0000:00:01.1: reg 0x20: [io 0xc200-0xc20f]
  192. [ 0.216593] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
  193. [ 0.216596] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
  194. [ 0.216598] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
  195. [ 0.216600] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
  196. [ 0.216853] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
  197. [ 0.217684] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
  198. [ 0.217709] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
  199. [ 0.218098] pci 0000:00:02.0: [5853:0001] type 00 class 0xff8000
  200. [ 0.219648] pci 0000:00:02.0: reg 0x10: [io 0xc000-0xc0ff]
  201. [ 0.220824] pci 0000:00:02.0: reg 0x14: [mem 0xf2000000-0xf2ffffff pref]
  202. [ 0.227913] pci 0000:00:03.0: [1013:00b8] type 00 class 0x030000
  203. [ 0.229386] pci 0000:00:03.0: reg 0x10: [mem 0xf0000000-0xf1ffffff pref]
  204. [ 0.230825] pci 0000:00:03.0: reg 0x14: [mem 0xf3050000-0xf3050fff]
  205. [ 0.237695] pci 0000:00:03.0: reg 0x30: [mem 0xf3040000-0xf304ffff pref]
  206. [ 0.238595] pci_bus 0000:00: on NUMA node 0
  207. [ 0.238889] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 10 11)
  208. [ 0.239053] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
  209. [ 0.239225] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
  210. [ 0.239396] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 10 11)
  211. [ 0.240431] ACPI: Enabled 2 GPEs in block 00 to 0F
  212. [ 0.240511] xen:balloon: Initialising balloon driver
  213. [ 0.244240] xen_balloon: Initialising balloon driver
  214. [ 0.244491] vgaarb: setting as boot device: PCI:0000:00:03.0
  215. [ 0.244495] vgaarb: device added: PCI:0000:00:03.0,decodes=io+mem,owns=io+mem,locks=none
  216. [ 0.244507] vgaarb: loaded
  217. [ 0.244510] vgaarb: bridge control possible 0000:00:03.0
  218. [ 0.244599] SCSI subsystem initialized
  219. [ 0.244610] ACPI: bus type USB registered
  220. [ 0.244633] usbcore: registered new interface driver usbfs
  221. [ 0.244643] usbcore: registered new interface driver hub
  222. [ 0.244680] usbcore: registered new device driver usb
  223. [ 0.244769] ioremap error for 0xfc001000-0xfc002000, requested 0x2, got 0x0
  224. [ 0.244774] dmi: Firmware registration failed.
  225. [ 0.244784] PCI: Using ACPI for IRQ routing
  226. [ 0.244787] PCI: pci_cache_line_size set to 64 bytes
  227. [ 0.245067] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
  228. [ 0.245069] e820: reserve RAM buffer [mem 0xeffff000-0xefffffff]
  229. [ 0.245069] e820: reserve RAM buffer [mem 0x18f800000-0x18fffffff]
  230. [ 0.245237] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
  231. [ 0.245269] amd_nb: Cannot enumerate AMD northbridges
  232. [ 0.245295] clocksource: Switched to clocksource xen
  233. [ 0.247284] pnp: PnP ACPI init
  234. [ 0.247330] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
  235. [ 0.247334] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
  236. [ 0.247384] system 00:01: [io 0x08a0-0x08a3] has been reserved
  237. [ 0.247387] system 00:01: [io 0x0cc0-0x0ccf] has been reserved
  238. [ 0.247389] system 00:01: [io 0x04d0-0x04d1] has been reserved
  239. [ 0.247391] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
  240. [ 0.247410] xen: --> pirq=17 -> irq=8 (gsi=8)
  241. [ 0.247420] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
  242. [ 0.247433] xen: --> pirq=18 -> irq=12 (gsi=12)
  243. [ 0.247443] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
  244. [ 0.247454] xen: --> pirq=19 -> irq=1 (gsi=1)
  245. [ 0.247464] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
  246. [ 0.247475] xen: --> pirq=20 -> irq=6 (gsi=6)
  247. [ 0.247477] pnp 00:05: [dma 2]
  248. [ 0.247486] pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
  249. [ 0.247522] system 00:06: [io 0xae00-0xae0f] has been reserved
  250. [ 0.247524] system 00:06: [io 0xb044-0xb047] has been reserved
  251. [ 0.247527] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
  252. [ 0.247677] pnp: PnP ACPI: found 7 devices
  253. [ 0.247677] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
  254. [ 0.247677] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
  255. [ 0.247677] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
  256. [ 0.247677] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
  257. [ 0.247677] pci_bus 0000:00: resource 7 [mem 0xf0000000-0xfbffffff window]
  258. [ 0.247677] NET: Registered protocol family 2
  259. [ 0.247677] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
  260. [ 0.247677] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  261. [ 0.247677] TCP: Hash tables configured (established 65536 bind 65536)
  262. [ 0.247677] UDP hash table entries: 4096 (order: 5, 131072 bytes)
  263. [ 0.247677] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
  264. [ 0.247677] NET: Registered protocol family 1
  265. [ 0.249680] RPC: Registered named UNIX socket transport module.
  266. [ 0.249680] RPC: Registered udp transport module.
  267. [ 0.249680] RPC: Registered tcp transport module.
  268. [ 0.249680] RPC: Registered tcp NFSv4.1 backchannel transport module.
  269. [ 0.249680] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
  270. [ 0.249680] pci 0000:00:01.0: PIIX3: Enabling Passive Release
  271. [ 0.249680] pci 0000:00:01.0: Activating ISA DMA hang workarounds
  272. [ 0.249680] pci 0000:00:03.0: Video device with shadowed ROM
  273. [ 0.249680] PCI: CLS 0 bytes, default 64
  274. [ 0.249680] Trying to unpack rootfs image as initramfs...
  275. [ 0.597034] Freeing initrd memory: 4464K (ffff88007fba3000 - ffff88007ffff000)
  276. [ 0.597046] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
  277. [ 0.597048] software IO TLB [mem 0xebfff000-0xeffff000] (64MB) mapped at [ffff8800ebfff000-ffff8800efffefff]
  278. [ 0.597151] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 655360 ms ovfl timer
  279. [ 0.597154] hw unit of domain pp0-core 2^-14 Joules
  280. [ 0.597156] hw unit of domain package 2^-14 Joules
  281. [ 0.597158] hw unit of domain dram 2^-16 Joules
  282. [ 0.597720] futex hash table entries: 16384 (order: 8, 1048576 bytes)
  283. [ 0.598156] VFS: Disk quotas dquot_6.6.0
  284. [ 0.598202] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  285. [ 0.598484] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  286. [ 0.598691] NFS: Registering the id_resolver key type
  287. [ 0.598701] Key type id_resolver registered
  288. [ 0.598702] Key type id_legacy registered
  289. [ 0.598720] ntfs: driver 2.1.32 [Flags: R/O].
  290. [ 0.598782] SGI XFS with ACLs, security attributes, realtime, no debug enabled
  291. [ 0.599503] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  292. [ 0.599507] io scheduler noop registered
  293. [ 0.599510] io scheduler deadline registered (default)
  294. [ 0.599825] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  295. [ 0.600485] Linux agpgart interface v0.103
  296. [ 0.600511] vesafb: mode is 1024x768x16, linelength=2048, pages=1
  297. [ 0.600512] vesafb: scrolling: redraw
  298. [ 0.600514] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
  299. [ 0.600522] vesafb: framebuffer at 0xf0000000, mapped to 0xffffc90000400000, using 3072k, total 4096k
  300. [ 0.646293] Console: switching to colour frame buffer device 128x48
  301. [ 0.688189] fb0: VESA VGA frame buffer device
  302. [ 0.688474] ioatdma: Intel(R) QuickData Technology Driver 4.00
  303. [ 0.688998] xen:xen_evtchn: Event-channel device installed
  304. [ 0.689594] xen: --> pirq=21 -> irq=24 (gsi=24)
  305. [ 0.689669] xen:grant_table: Grant tables using version 1 layout
  306. [ 0.690087] Grant table initialized
  307. [ 0.692334] brd: module loaded
  308. [ 0.693592] loop: module loaded
  309. [ 0.694692] vbd vbd-5632: 19 xenbus_dev_probe on device/vbd/5632
  310. [ 0.695274] vbd vbd-5632: failed to write error node for device/vbd/5632 (19 xenbus_dev_probe on device/vbd/5632)
  311. [ 0.702580] Loading iSCSI transport class v2.0-870.
  312. [ 0.702955] st: Version 20101219, fixed bufsize 32768, s/g segs 256
  313. [ 0.703394] SCSI Media Changer driver v0.25
  314. [ 0.703651] Atheros(R) L2 Ethernet Driver - version 2.2.3
  315. [ 0.703991] Copyright (c) 2007 Atheros Corporation.
  316. [ 0.704300] jme: JMicron JMC2XX ethernet driver version 1.0.8
  317. [ 0.704678] xen_netfront: Initialising Xen virtual ethernet driver
  318. [ 0.705945] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
  319. [ 0.731118] serio: i8042 KBD port at 0x60,0x64 irq 1
  320. [ 0.747459] serio: i8042 AUX port at 0x60,0x64 irq 12
  321. [ 0.763481] mousedev: PS/2 mouse device common for all mice
  322. [ 0.779860] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
  323. [ 0.812322] blkfront: xvda: flush diskcache: enabled; persistent grants: enabled; indirect descriptors: disabled;
  324. [ 0.832515] input: Xen Virtual Keyboard as /devices/virtual/input/input3
  325. [ 0.849548] input: Xen Virtual Pointer as /devices/virtual/input/input4
  326. [ 0.867012]  xvda: xvda1 xvda2 xvda3
  327. [ 0.889194] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
  328. [ 0.906415] rtc_cmos 00:02: alarms up to one day, 114 bytes nvram, hpet irqs
  329. [ 0.923695] hidraw: raw HID events driver (C) Jiri Kosina
  330. [ 0.940658] usbcore: registered new interface driver usbhid
  331. [ 0.958142] usbhid: USB HID core driver
  332. [ 0.975196] NET: Registered protocol family 17
  333. [ 0.992459] Key type dns_resolver registered
  334. [ 1.009154] registered taskstats version 1
  335. [ 1.026396] xenbus_probe_frontend: Device with no driver: device/vbd/5632
  336. [ 1.043275] rtc_cmos 00:02: setting system clock to 2018-08-06 19:58:52 UTC (1533585532)
  337. [ 1.060890] Freeing unused kernel memory: 912K (ffffffff81879000 - ffffffff8195d000)
  338. [ 1.078334] Write protecting the kernel read-only data: 8192k
  339. [ 1.095852] Freeing unused kernel memory: 1348K (ffff8800014af000 - ffff880001600000)
  340. [ 1.114300] Freeing unused kernel memory: 240K (ffff8800017c4000 - ffff880001800000)
  341. [ 1.350314] libata version 3.00 loaded.
  342. [ 1.542737] ata_piix 0000:00:01.1: version 2.13
  343. [ 1.544043] scsi host0: ata_piix
  344. [ 1.544290] scsi host1: ata_piix
  345. [ 1.544314] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc200 irq 14
  346. [ 1.544315] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc208 irq 15
  347. [ 1.590139] tsc: Refined TSC clocksource calibration: 3499.996 MHz
  348. [ 1.590143] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x32734d20948, max_idle_ns: 440795306379 ns
  349. [ 1.602652] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
  350. [ 1.701474] ata2.01: NODEV after polling detection
  351. [ 1.702167] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
  352. [ 1.703091] ata2.00: configured for MWDMA2
  353. [ 1.704226] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
  354. [ 1.705798] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
  355. [ 1.705800] cdrom: Uniform CD-ROM driver Revision: 3.20
  356. [ 1.705915] sr 1:0:0:0: Attached scsi CD-ROM sr0
  357. [ 1.738360] sr 1:0:0:0: Attached scsi generic sg0 type 5
  358. [ 1.770294] scsi: <fdomain> Detection failed (no card)
  359. [ 1.831741] GDT-HA: Storage RAID Controller Driver. Version: 3.05
  360. [ 1.930443] Fusion MPT base driver 3.04.20
  361. [ 1.930444] Copyright (c) 1999-2008 LSI Corporation
  362. [ 1.954826] Fusion MPT SPI Host driver 3.04.20
  363. [ 1.956756] Fusion MPT FC Host driver 3.04.20
  364. [ 1.959562] Fusion MPT SAS Host driver 3.04.20
  365. [ 1.961892] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
  366. [ 1.963432] 3ware Storage Controller device driver for Linux v1.26.02.003.
  367. [ 1.965000] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
  368. [ 1.969593] HP CISS Driver (v 3.6.26)
  369. [ 1.975115] Adaptec aacraid driver 1.2-1[41010]-ms
  370. [ 1.977712] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
  371. [ 1.977882] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
  372. [ 1.980377] megasas: 06.808.16.00-rc1
  373. [ 2.004552] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.26-k.
  374. [ 2.010769] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
  375. [ 2.037867] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  376. [ 2.037960] ehci-pci: EHCI PCI platform driver
  377. [ 2.048550] usbcore: registered new interface driver usb-storage
  378. [ 2.050457] uhci_hcd: USB Universal Host Controller Interface driver
  379. [ 2.052230] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  380. [ 2.216785] device-mapper: uevent: version 1.0.3
  381. [ 2.216844] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
  382. [ 2.420023] raid6: sse2x1 gen() 10343 MB/s
  383. [ 2.590021] raid6: sse2x1 xor() 7734 MB/s
  384. [ 2.760015] raid6: sse2x2 gen() 13546 MB/s
  385. [ 2.930010] raid6: sse2x2 xor() 9166 MB/s
  386. [ 3.100026] raid6: sse2x4 gen() 15960 MB/s
  387. [ 3.270019] raid6: sse2x4 xor() 9357 MB/s
  388. [ 3.440016] raid6: avx2x1 gen() 20609 MB/s
  389. [ 3.610027] raid6: avx2x2 gen() 19032 MB/s
  390. [ 3.780014] raid6: avx2x4 gen() 24186 MB/s
  391. [ 3.780016] raid6: using algorithm avx2x4 gen() 24186 MB/s
  392. [ 3.780017] raid6: using avx2x2 recovery algorithm
  393. [ 3.780658] xor: automatically using best checksumming function:
  394. [ 3.880028]  avx : 33771.200 MB/sec
  395. [ 3.880913] async_tx: api initialized (async)
  396. [ 3.881506] md: raid6 personality registered for level 6
  397. [ 3.881507] md: raid5 personality registered for level 5
  398. [ 3.881508] md: raid4 personality registered for level 4
  399. [ 3.881620] device-mapper: raid: Loading target version 1.7.0
  400. [ 3.884320] md: raid0 personality registered for level 0
  401. [ 3.885602] md: raid1 personality registered for level 1
  402. [ 3.895340] md: raid10 personality registered for level 10
  403. [ 3.896587] md: linear personality registered for level -1
  404. [ 3.897842] md: multipath personality registered for level -4
  405. [ 3.933443] Btrfs loaded
  406. [ 3.937661] JFS: nTxBlock = 8192, nTxLock = 65536
  407. [ 3.948147] fuse init (API version 7.23)
  408. [ 3.977374] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
  409. [ 3.977376] e1000: Copyright (c) 1999-2006 Intel Corporation.
  410. [ 3.979141] pps_core: LinuxPPS API ver. 1 registered
  411. [ 3.979142] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  412. [ 3.979318] PTP clock support registered
  413. [ 3.980064] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
  414. [ 3.980065] igb: Copyright (c) 2007-2014 Intel Corporation.
  415. [ 3.982252] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
  416. [ 3.984985] sky2: driver version 1.30
  417. [ 3.990821] VMware vmxnet3 virtual NIC driver - version 1.4.5.0-k-NAPI
  418. [ 4.023294] iscsi: registered transport (tcp)
  419. [ 14.535080] random: nonblocking pool is initialized
  420. [ 14.665032] ISO 9660 Extensions: Microsoft Joliet Level 3
  421. [ 14.665955] ISO 9660 Extensions: RRIP_1991A
  422. [ 19.120997] udevd[11865]: starting version 3.1.5
  423. [ 19.201113] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
  424. [ 19.209175] ACPI: Power Button [PWRF]
  425. [ 19.209222] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input6
  426. [ 19.209675] ACPI: Sleep Button [SLPF]
  427. [ 19.293007] FDC 0 is a S82078B
  428. [ 20.350244] warning: process `hwsetup' used the deprecated sysctl system call with 1.23.
  429. [ 22.050308] cfg80211: World regulatory domain updated:
  430. [ 22.050310] cfg80211: DFS Master region: unset
  431. [ 22.050311] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  432. [ 22.050312] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  433. [ 22.050313] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
  434. [ 22.050314] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
  435. [ 22.050315] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
  436. [ 22.050316] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
  437. [ 22.050317] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
  438. [ 22.050318] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  439. [ 22.050319] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
  440. [ 45.374483] atkbd serio0: Unknown key pressed (translated set 2, code 0x0 on isa0060/serio0).
  441. [ 45.374486] atkbd serio0: Use 'setkeycodes 00 <keycode>' to make it known.
  442. [ 45.462113] atkbd serio0: Unknown key released (translated set 2, code 0x0 on isa0060/serio0).
  443. [ 45.462116] atkbd serio0: Use 'setkeycodes 00 <keycode>' to make it known.
  444. [ 83.758156] EXT4-fs (xvda3): mounted filesystem with ordered data mode. Opts: (null)
  445.  
Powered by spacepaste. Paste removal.