spacepaste

Paste details

reply | raw

  1.  
  2. [ 0.000000] Linux version 4.16.2-gentoo-gnu (root@mygentoo) (gcc version 7.3.0 (Gentoo Hardened 7.3.0-r1 p1.1)) #5 SMP Thu Apr 19 22:55:31 EDT 2018
  3. [ 0.000000] Command line: BOOT_IMAGE=/kernel-genkernel-x86_64-4.16.2-gentoo-gnu root=/dev/ram0 ro real_root=/dev/mapper/gentoo-lvolroot crypt_root=/dev/sda4 dolvm
  4. [ 0.000000] x86/fpu: x87 FPU will use FXSAVE
  5. [ 0.000000] e820: BIOS-provided physical RAM map:
  6. [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
  7. [ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
  8. [ 0.000000] BIOS-e820: [mem 0x00000000000c0000-0x00000000000fffff] reserved
  9. [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfa9ffff] usable
  10. [ 0.000000] BIOS-e820: [mem 0x00000000bfaa0000-0x00000000bfbfffff] type 16
  11. [ 0.000000] BIOS-e820: [mem 0x00000000bfc00000-0x00000000cfffffff] reserved
  12. [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
  13. [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
  14. [ 0.000000] NX (Execute Disable) protection: active
  15. [ 0.000000] random: fast init done
  16. [ 0.000000] SMBIOS 2.7 present.
  17. [ 0.000000] DMI: LENOVO 7454CTO/7454CTO, BIOS CBET4000 3774c98 09/07/2016
  18. [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
  19. [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
  20. [ 0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
  21. [ 0.000000] MTRR default type: write-back
  22. [ 0.000000] MTRR fixed ranges enabled:
  23. [ 0.000000] 00000-9FFFF write-back
  24. [ 0.000000] A0000-BFFFF uncachable
  25. [ 0.000000] C0000-FFFFF write-back
  26. [ 0.000000] MTRR variable ranges enabled:
  27. [ 0.000000] 0 base 0BFC00000 mask FFFC00000 uncachable
  28. [ 0.000000] 1 base 0C0000000 mask FF0000000 uncachable
  29. [ 0.000000] 2 base 0D0000000 mask FF0000000 write-combining
  30. [ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable
  31. [ 0.000000] 4 disabled
  32. [ 0.000000] 5 disabled
  33. [ 0.000000] 6 disabled
  34. [ 0.000000] 7 disabled
  35. [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
  36. [ 0.000000] e820: last_pfn = 0xbfaa0 max_arch_pfn = 0x400000000
  37. [ 0.000000] found SMP MP-table at [mem 0x000f0cf0-0x000f0cff] mapped at [ (ptrval)]
  38. [ 0.000000] Base memory trampoline at [ (ptrval)] 99000 size 24576
  39. [ 0.000000] BRK [0x027e1000, 0x027e1fff] PGTABLE
  40. [ 0.000000] BRK [0x027e2000, 0x027e2fff] PGTABLE
  41. [ 0.000000] BRK [0x027e3000, 0x027e3fff] PGTABLE
  42. [ 0.000000] BRK [0x027e4000, 0x027e4fff] PGTABLE
  43. [ 0.000000] RAMDISK: [mem 0x32b35000-0x35591fff]
  44. [ 0.000000] ACPI: Early table checksum verification disabled
  45. [ 0.000000] ACPI: RSDP 0x00000000000F0E90 000024 (v02 CORE )
  46. [ 0.000000] ACPI: XSDT 0x00000000BFAB10E0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
  47. [ 0.000000] ACPI: FACP 0x00000000BFAB46D0 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000000)
  48. [ 0.000000] ACPI: DSDT 0x00000000BFAB1280 00344E (v03 COREv4 COREBOOT 20090419 INTL 20160318)
  49. [ 0.000000] ACPI: FACS 0x00000000BFAB1240 000040
  50. [ 0.000000] ACPI: SSDT 0x00000000BFAB47D0 00054E (v02 CORE COREBOOT 0000002A CORE 0000002A)
  51. [ 0.000000] ACPI: MCFG 0x00000000BFAB4D20 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
  52. [ 0.000000] ACPI: TCPA 0x00000000BFAB4D60 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
  53. [ 0.000000] ACPI: APIC 0x00000000BFAB4DA0 000068 (v01 CORE COREBOOT 00000000 CORE 00000000)
  54. [ 0.000000] ACPI: DMAR 0x00000000BFAB4E10 0000A8 (v01 CORE COREBOOT 00000000 CORE 00000000)
  55. [ 0.000000] ACPI: HPET 0x00000000BFAB4EC0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
  56. [ 0.000000] ACPI: Local APIC address 0xfee00000
  57. [ 0.000000] tsc: Fast TSC calibration using PIT
  58. [ 0.000000] Zone ranges:
  59. [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
  60. [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
  61. [ 0.000000] Normal [mem 0x0000000100000000-0x000000012fffffff]
  62. [ 0.000000] Movable zone start for each node
  63. [ 0.000000] Early memory node ranges
  64. [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
  65. [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bfa9ffff]
  66. [ 0.000000] node 0: [mem 0x0000000100000000-0x000000012fffffff]
  67. [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000012fffffff]
  68. [ 0.000000] On node 0 totalpages: 981567
  69. [ 0.000000] DMA zone: 64 pages used for memmap
  70. [ 0.000000] DMA zone: 22 pages reserved
  71. [ 0.000000] DMA zone: 3999 pages, LIFO batch:0
  72. [ 0.000000] DMA32 zone: 12203 pages used for memmap
  73. [ 0.000000] DMA32 zone: 780960 pages, LIFO batch:31
  74. [ 0.000000] Normal zone: 3072 pages used for memmap
  75. [ 0.000000] Normal zone: 196608 pages, LIFO batch:31
  76. [ 0.000000] Reserved but unavailable: 97 pages
  77. [ 0.000000] Reserving Intel graphics memory at [mem 0xc0000000-0xcfffffff]
  78. [ 0.000000] ACPI: PM-Timer IO Port: 0x508
  79. [ 0.000000] ACPI: Local APIC address 0xfee00000
  80. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
  81. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
  82. [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
  83. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
  84. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  85. [ 0.000000] ACPI: IRQ0 used by override.
  86. [ 0.000000] ACPI: IRQ9 used by override.
  87. [ 0.000000] Using ACPI (MADT) for SMP configuration information
  88. [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
  89. [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
  90. [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
  91. [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000bffff]
  92. [ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
  93. [ 0.000000] PM: Registered nosave memory: [mem 0xbfaa0000-0xbfbfffff]
  94. [ 0.000000] PM: Registered nosave memory: [mem 0xbfc00000-0xcfffffff]
  95. [ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xefffffff]
  96. [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
  97. [ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xffffffff]
  98. [ 0.000000] e820: [mem 0xd0000000-0xefffffff] available for PCI devices
  99. [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
  100. [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
  101. [ 0.000000] percpu: Embedded 44 pages/cpu @ (ptrval) s139736 r8192 d32296 u1048576
  102. [ 0.000000] pcpu-alloc: s139736 r8192 d32296 u1048576 alloc=1*2097152
  103. [ 0.000000] pcpu-alloc: [0] 0 1
  104. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 966206
  105. [ 0.000000] Kernel command line: BOOT_IMAGE=/kernel-genkernel-x86_64-4.16.2-gentoo-gnu root=/dev/ram0 ro real_root=/dev/mapper/gentoo-lvolroot crypt_root=/dev/sda4 dolvm
  106. [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
  107. [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
  108. [ 0.000000] Memory: 3724364K/3926268K available (10252K kernel code, 1958K rwdata, 3176K rodata, 1496K init, 1616K bss, 201904K reserved, 0K cma-reserved)
  109. [ 0.000000] Kernel/User page tables isolation: enabled
  110. [ 0.000000] ftrace: allocating 31084 entries in 122 pages
  111. [ 0.000000] Hierarchical RCU implementation.
  112. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2.
  113. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
  114. [ 0.000000] NR_IRQS: 524544, nr_irqs: 440, preallocated irqs: 16
  115. [ 0.000000] spurious 8259A interrupt: IRQ7.
  116. [ 0.000000] Console: colour dummy device 80x25
  117. [ 0.000000] console [tty0] enabled
  118. [ 0.000000] ACPI: Core revision 20180105
  119. [ 0.000000] ACPI: 2 ACPI AML tables successfully acquired and loaded
  120. [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
  121. [ 0.000000] hpet clockevent registered
  122. [ 0.000000] APIC: Switch to symmetric I/O mode setup
  123. [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
  124. [ 0.005000] tsc: Fast TSC calibration using PIT
  125. [ 0.006000] tsc: Detected 2266.913 MHz processor
  126. [ 0.006000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x20ad1d21952, max_idle_ns: 440795321498 ns
  127. [ 0.006000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4533.82 BogoMIPS (lpj=2266913)
  128. [ 0.006000] pid_max: default: 32768 minimum: 301
  129. [ 0.007051] Security Framework initialized
  130. [ 0.007057] SELinux: Initializing.
  131. [ 0.007080] SELinux: Starting in permissive mode
  132. [ 0.007131] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
  133. [ 0.007157] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
  134. [ 0.007447] CPU: Physical Processor ID: 0
  135. [ 0.007452] CPU: Processor Core ID: 0
  136. [ 0.007456] mce: CPU supports 6 MCE banks
  137. [ 0.007464] CPU0: Thermal monitoring enabled (TM2)
  138. [ 0.007470] process: using mwait in idle threads
  139. [ 0.007477] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
  140. [ 0.007480] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
  141. [ 0.007485] Spectre V2 : Mitigation: Full generic retpoline
  142. [ 0.007657] Freeing SMP alternatives memory: 28K
  143. [ 0.009000] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz (family: 0x6, model: 0x17, stepping: 0x6)
  144. [ 0.009000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
  145. [ 0.009000] ... version: 2
  146. [ 0.009000] ... bit width: 40
  147. [ 0.009000] ... generic registers: 2
  148. [ 0.009000] ... value mask: 000000ffffffffff
  149. [ 0.009000] ... max period: 000000007fffffff
  150. [ 0.009000] ... fixed-purpose events: 3
  151. [ 0.009000] ... event mask: 0000000700000003
  152. [ 0.009000] Hierarchical SRCU implementation.
  153. [ 0.009219] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
  154. [ 0.009252] smp: Bringing up secondary CPUs ...
  155. [ 0.009459] x86: Booting SMP configuration:
  156. [ 0.009464] .... node #0, CPUs: #1
  157. [ 0.011048] smp: Brought up 1 node, 2 CPUs
  158. [ 0.011048] smpboot: Max logical packages: 1
  159. [ 0.011048] smpboot: Total of 2 processors activated (9067.65 BogoMIPS)
  160. [ 0.012310] devtmpfs: initialized
  161. [ 0.012310] x86/mm: Memory block size: 128MB
  162. [ 0.013756] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
  163. [ 0.013768] futex hash table entries: 512 (order: 3, 32768 bytes)
  164. [ 0.014105] NET: Registered protocol family 16
  165. [ 0.014264] audit: initializing netlink subsys (disabled)
  166. [ 0.014278] audit: type=2000 audit(1525703359.014:1): state=initialized audit_enabled=0 res=1
  167. [ 0.014278] cpuidle: using governor menu
  168. [ 0.014278] ACPI: bus type PCI registered
  169. [ 0.014278] PCI: Using configuration type 1 for base access
  170. [ 0.017018] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  171. [ 0.017092] ACPI: Added _OSI(Module Device)
  172. [ 0.017098] ACPI: Added _OSI(Processor Device)
  173. [ 0.017102] ACPI: Added _OSI(3.0 _SCP Extensions)
  174. [ 0.017107] ACPI: Added _OSI(Processor Aggregator Device)
  175. [ 0.017319] ACPI: Executed 1 blocks of module-level executable AML code
  176. [ 0.019333] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
  177. [ 0.021034] ACPI: EC: EC started
  178. [ 0.021039] ACPI: EC: interrupt blocked
  179. [ 0.021152] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
  180. [ 0.021159] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
  181. [ 0.021166] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
  182. [ 0.021171] ACPI: Interpreter enabled
  183. [ 0.021201] ACPI: (supports S0 S3 S4 S5)
  184. [ 0.021206] ACPI: Using IOAPIC for interrupt routing
  185. [ 0.021243] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
  186. [ 0.021497] ACPI: Enabled 2 GPEs in block 00 to 3F
  187. [ 0.033236] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
  188. [ 0.033248] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
  189. [ 0.033284] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
  190. [ 0.033518] PCI host bridge to bus 0000:00
  191. [ 0.033526] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
  192. [ 0.033532] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
  193. [ 0.033539] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
  194. [ 0.033546] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
  195. [ 0.033552] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
  196. [ 0.033559] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
  197. [ 0.033566] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
  198. [ 0.033572] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
  199. [ 0.033579] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
  200. [ 0.033585] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
  201. [ 0.033592] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
  202. [ 0.033598] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
  203. [ 0.033605] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
  204. [ 0.033612] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
  205. [ 0.033618] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
  206. [ 0.033625] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
  207. [ 0.033632] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff window]
  208. [ 0.033638] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
  209. [ 0.033645] pci_bus 0000:00: root bus resource [bus 00-ff]
  210. [ 0.033661] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
  211. [ 0.033822] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
  212. [ 0.033840] pci 0000:00:02.0: reg 0x10: [mem 0xe1000000-0xe13fffff 64bit]
  213. [ 0.033849] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
  214. [ 0.033856] pci 0000:00:02.0: reg 0x20: [io 0x3400-0x3407]
  215. [ 0.033875] pci 0000:00:02.0: BAR 2: assigned to efifb
  216. [ 0.034015] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
  217. [ 0.034030] pci 0000:00:02.1: reg 0x10: [mem 0xe1400000-0xe14fffff 64bit]
  218. [ 0.034223] pci 0000:00:19.0: [8086:10f5] type 00 class 0x020000
  219. [ 0.034253] pci 0000:00:19.0: reg 0x10: [mem 0xe1600000-0xe161ffff]
  220. [ 0.034266] pci 0000:00:19.0: reg 0x14: [mem 0xe1624000-0xe1624fff]
  221. [ 0.034278] pci 0000:00:19.0: reg 0x18: [io 0x3000-0x301f]
  222. [ 0.034372] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
  223. [ 0.034495] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
  224. [ 0.034561] pci 0000:00:1a.0: reg 0x20: [io 0x3020-0x303f]
  225. [ 0.034739] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
  226. [ 0.034805] pci 0000:00:1a.1: reg 0x20: [io 0x3040-0x305f]
  227. [ 0.034983] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
  228. [ 0.035054] pci 0000:00:1a.2: reg 0x20: [io 0x3060-0x307f]
  229. [ 0.035242] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
  230. [ 0.035273] pci 0000:00:1a.7: reg 0x10: [mem 0xe1626000-0xe16263ff]
  231. [ 0.035386] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
  232. [ 0.035523] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
  233. [ 0.035552] pci 0000:00:1b.0: reg 0x10: [mem 0xe1620000-0xe1623fff 64bit]
  234. [ 0.035659] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
  235. [ 0.035795] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
  236. [ 0.035898] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
  237. [ 0.036046] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
  238. [ 0.036157] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
  239. [ 0.036296] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
  240. [ 0.036398] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
  241. [ 0.036538] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
  242. [ 0.036648] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
  243. [ 0.036792] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
  244. [ 0.036858] pci 0000:00:1d.0: reg 0x20: [io 0x3080-0x309f]
  245. [ 0.037041] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
  246. [ 0.037108] pci 0000:00:1d.1: reg 0x20: [io 0x30a0-0x30bf]
  247. [ 0.037288] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
  248. [ 0.037354] pci 0000:00:1d.2: reg 0x20: [io 0x30c0-0x30df]
  249. [ 0.037544] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
  250. [ 0.037574] pci 0000:00:1d.7: reg 0x10: [mem 0xe1627000-0xe16273ff]
  251. [ 0.037688] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
  252. [ 0.037819] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
  253. [ 0.038017] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100
  254. [ 0.038294] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
  255. [ 0.038325] pci 0000:00:1f.2: reg 0x10: [io 0x3408-0x340f]
  256. [ 0.038338] pci 0000:00:1f.2: reg 0x14: [io 0x3418-0x341b]
  257. [ 0.038350] pci 0000:00:1f.2: reg 0x18: [io 0x3410-0x3417]
  258. [ 0.038363] pci 0000:00:1f.2: reg 0x1c: [io 0x341c-0x341f]
  259. [ 0.038375] pci 0000:00:1f.2: reg 0x20: [io 0x30e0-0x30ff]
  260. [ 0.038388] pci 0000:00:1f.2: reg 0x24: [mem 0xe1625000-0xe16257ff]
  261. [ 0.038458] pci 0000:00:1f.2: PME# supported from D3hot
  262. [ 0.038589] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
  263. [ 0.038619] pci 0000:00:1f.3: reg 0x10: [mem 0xe1628000-0xe16280ff 64bit]
  264. [ 0.038652] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
  265. [ 0.038858] pci 0000:00:1c.0: PCI bridge to [bus 01]
  266. [ 0.038963] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000
  267. [ 0.039007] pci 0000:02:00.0: reg 0x10: [mem 0xe1500000-0xe150ffff 64bit]
  268. [ 0.039167] pci 0000:02:00.0: supports D1
  269. [ 0.039169] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
  270. [ 0.042022] pci 0000:00:1c.1: PCI bridge to [bus 02]
  271. [ 0.042035] pci 0000:00:1c.1: bridge window [mem 0xe1500000-0xe15fffff]
  272. [ 0.042106] pci 0000:00:1c.2: PCI bridge to [bus 03]
  273. [ 0.042191] pci 0000:00:1c.3: PCI bridge to [bus 04]
  274. [ 0.042201] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
  275. [ 0.042206] pci 0000:00:1c.3: bridge window [mem 0xe0800000-0xe0ffffff]
  276. [ 0.042215] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe07fffff 64bit pref]
  277. [ 0.042347] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
  278. [ 0.042366] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
  279. [ 0.042369] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
  280. [ 0.042372] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
  281. [ 0.042375] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode)
  282. [ 0.042378] pci 0000:00:1e.0: bridge window [mem 0x000c4000-0x000c7fff window] (subtractive decode)
  283. [ 0.042380] pci 0000:00:1e.0: bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode)
  284. [ 0.042383] pci 0000:00:1e.0: bridge window [mem 0x000cc000-0x000cffff window] (subtractive decode)
  285. [ 0.042387] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
  286. [ 0.042389] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
  287. [ 0.042392] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
  288. [ 0.042395] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
  289. [ 0.042398] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
  290. [ 0.042400] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
  291. [ 0.042403] pci 0000:00:1e.0: bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode)
  292. [ 0.042406] pci 0000:00:1e.0: bridge window [mem 0x000ec000-0x000effff window] (subtractive decode)
  293. [ 0.042409] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
  294. [ 0.042412] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xfebfffff window] (subtractive decode)
  295. [ 0.042414] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
  296. [ 0.042455] pci_bus 0000:00: on NUMA node 0
  297. [ 0.042638] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11
  298. [ 0.042738] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
  299. [ 0.042834] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
  300. [ 0.042930] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
  301. [ 0.043031] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *0, disabled.
  302. [ 0.043129] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
  303. [ 0.043226] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *0, disabled.
  304. [ 0.043323] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
  305. [ 0.045172] ACPI: EC: interrupt unblocked
  306. [ 0.045187] ACPI: EC: event unblocked
  307. [ 0.045215] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
  308. [ 0.045223] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
  309. [ 0.045323] pci 0000:00:02.0: vgaarb: setting as boot VGA device
  310. [ 0.045323] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
  311. [ 0.045323] pci 0000:00:02.0: vgaarb: bridge control possible
  312. [ 0.045323] vgaarb: loaded
  313. [ 0.045323] SCSI subsystem initialized
  314. [ 0.045323] libata version 3.00 loaded.
  315. [ 0.045323] ACPI: bus type USB registered
  316. [ 0.045323] usbcore: registered new interface driver usbfs
  317. [ 0.045323] usbcore: registered new interface driver hub
  318. [ 0.045323] usbcore: registered new device driver usb
  319. [ 0.045323] pps_core: LinuxPPS API ver. 1 registered
  320. [ 0.045323] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  321. [ 0.045323] PTP clock support registered
  322. [ 0.045323] EDAC MC: Ver: 3.0.0
  323. [ 0.046016] PCI: Using ACPI for IRQ routing
  324. [ 0.046022] PCI: pci_cache_line_size set to 64 bytes
  325. [ 0.046106] e820: reserve RAM buffer [mem 0xbfaa0000-0xbfffffff]
  326. [ 0.046254] NetLabel: Initializing
  327. [ 0.046259] NetLabel: domain hash size = 128
  328. [ 0.046263] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
  329. [ 0.046295] NetLabel: unlabeled traffic allowed by default
  330. [ 0.046305] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
  331. [ 0.046305] clocksource: Switched to clocksource tsc-early
  332. [ 0.066507] VFS: Disk quotas dquot_6.6.0
  333. [ 0.066554] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  334. [ 0.069065] pnp: PnP ACPI init
  335. [ 0.069233] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
  336. [ 0.069241] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
  337. [ 0.069247] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
  338. [ 0.069254] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
  339. [ 0.069260] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
  340. [ 0.069267] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
  341. [ 0.069273] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
  342. [ 0.069279] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
  343. [ 0.069292] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
  344. [ 0.069966] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
  345. [ 0.069980] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
  346. [ 0.070059] system 00:02: [io 0x0800-0x080f] has been reserved
  347. [ 0.070067] system 00:02: [io 0x0500-0x057f] has been reserved
  348. [ 0.070073] system 00:02: [io 0x0580-0x05bf] has been reserved
  349. [ 0.070084] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
  350. [ 0.070120] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
  351. [ 0.070177] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
  352. [ 0.070225] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
  353. [ 0.070276] pnp 00:06: Plug and Play ACPI device, IDs WACf004 (active)
  354. [ 0.070419] pnp: PnP ACPI: found 7 devices
  355. [ 0.074989] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
  356. [ 0.075055] pci 0000:00:1c.0: PCI bridge to [bus 01]
  357. [ 0.075076] pci 0000:00:1c.1: PCI bridge to [bus 02]
  358. [ 0.075086] pci 0000:00:1c.1: bridge window [mem 0xe1500000-0xe15fffff]
  359. [ 0.075101] pci 0000:00:1c.2: PCI bridge to [bus 03]
  360. [ 0.075119] pci 0000:00:1c.3: PCI bridge to [bus 04]
  361. [ 0.075126] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
  362. [ 0.075136] pci 0000:00:1c.3: bridge window [mem 0xe0800000-0xe0ffffff]
  363. [ 0.075146] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe07fffff 64bit pref]
  364. [ 0.075158] pci 0000:00:1e.0: PCI bridge to [bus 05]
  365. [ 0.075178] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
  366. [ 0.075181] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
  367. [ 0.075184] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
  368. [ 0.075186] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
  369. [ 0.075189] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
  370. [ 0.075192] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
  371. [ 0.075195] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
  372. [ 0.075197] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
  373. [ 0.075200] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
  374. [ 0.075203] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
  375. [ 0.075205] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
  376. [ 0.075208] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
  377. [ 0.075211] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
  378. [ 0.075213] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
  379. [ 0.075216] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
  380. [ 0.075219] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
  381. [ 0.075222] pci_bus 0000:00: resource 20 [mem 0xd0000000-0xfebfffff window]
  382. [ 0.075224] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window]
  383. [ 0.075228] pci_bus 0000:02: resource 1 [mem 0xe1500000-0xe15fffff]
  384. [ 0.075231] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
  385. [ 0.075234] pci_bus 0000:04: resource 1 [mem 0xe0800000-0xe0ffffff]
  386. [ 0.075236] pci_bus 0000:04: resource 2 [mem 0xe0000000-0xe07fffff 64bit pref]
  387. [ 0.075239] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
  388. [ 0.075242] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
  389. [ 0.075245] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
  390. [ 0.075248] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000c3fff window]
  391. [ 0.075250] pci_bus 0000:05: resource 8 [mem 0x000c4000-0x000c7fff window]
  392. [ 0.075253] pci_bus 0000:05: resource 9 [mem 0x000c8000-0x000cbfff window]
  393. [ 0.075256] pci_bus 0000:05: resource 10 [mem 0x000cc000-0x000cffff window]
  394. [ 0.075258] pci_bus 0000:05: resource 11 [mem 0x000d0000-0x000d3fff window]
  395. [ 0.075261] pci_bus 0000:05: resource 12 [mem 0x000d4000-0x000d7fff window]
  396. [ 0.075264] pci_bus 0000:05: resource 13 [mem 0x000d8000-0x000dbfff window]
  397. [ 0.075266] pci_bus 0000:05: resource 14 [mem 0x000dc000-0x000dffff window]
  398. [ 0.075269] pci_bus 0000:05: resource 15 [mem 0x000e0000-0x000e3fff window]
  399. [ 0.075272] pci_bus 0000:05: resource 16 [mem 0x000e4000-0x000e7fff window]
  400. [ 0.075274] pci_bus 0000:05: resource 17 [mem 0x000e8000-0x000ebfff window]
  401. [ 0.075277] pci_bus 0000:05: resource 18 [mem 0x000ec000-0x000effff window]
  402. [ 0.075280] pci_bus 0000:05: resource 19 [mem 0x000f0000-0x000fffff window]
  403. [ 0.075282] pci_bus 0000:05: resource 20 [mem 0xd0000000-0xfebfffff window]
  404. [ 0.075285] pci_bus 0000:05: resource 21 [mem 0xfed40000-0xfed44fff window]
  405. [ 0.075437] NET: Registered protocol family 2
  406. [ 0.075831] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
  407. [ 0.075860] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
  408. [ 0.075971] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
  409. [ 0.076177] TCP: Hash tables configured (established 32768 bind 32768)
  410. [ 0.076239] UDP hash table entries: 2048 (order: 4, 65536 bytes)
  411. [ 0.076272] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
  412. [ 0.076369] NET: Registered protocol family 1
  413. [ 0.076396] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
  414. [ 0.078868] PCI: CLS 64 bytes, default 64
  415. [ 0.078940] Trying to unpack rootfs image as initramfs...
  416. [ 9.153862] Freeing initrd memory: 43380K
  417. [ 9.153880] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
  418. [ 9.153889] software IO TLB [mem 0xbbaa0000-0xbfaa0000] (64MB) mapped at [00000000a882ef72-00000000ae689f90]
  419. [ 9.155114] Initialise system trusted keyrings
  420. [ 9.155168] workingset: timestamp_bits=46 max_order=20 bucket_order=0
  421. [ 9.155609] SELinux: Registering netfilter hooks
  422. [ 9.156428] NET: Registered protocol family 38
  423. [ 9.156437] Key type asymmetric registered
  424. [ 9.156441] Asymmetric key parser 'x509' registered
  425. [ 9.156472] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  426. [ 9.156524] io scheduler noop registered
  427. [ 9.156529] io scheduler deadline registered
  428. [ 9.156554] io scheduler cfq registered (default)
  429. [ 9.156559] io scheduler mq-deadline registered
  430. [ 9.156564] io scheduler kyber registered
  431. [ 9.157662] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  432. [ 9.158348] Linux agpgart interface v0.103
  433. [ 9.158569] efifb: probing for efifb
  434. [ 9.158590] efifb: framebuffer at 0xd0000000, using 4032k, total 4032k
  435. [ 9.158596] efifb: mode is 1280x800x32, linelength=5120, pages=1
  436. [ 9.158599] efifb: scrolling: redraw
  437. [ 9.158605] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
  438. [ 9.162322] Console: switching to colour frame buffer device 160x50
  439. [ 9.165628] fb0: EFI VGA frame buffer device
  440. [ 9.165671] intel_idle: does not run on family 6 model 23
  441. [ 9.165683] ipmi message handler version 39.2
  442. [ 9.165714] IPMI System Interface driver.
  443. [ 9.165789] ipmi_si: Unable to find any System Interface(s)
  444. [ 9.166666] ACPI: AC Adapter [AC] (off-line)
  445. [ 9.166787] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0E:00/input/input0
  446. [ 9.166878] ACPI: Sleep Button [SLPB]
  447. [ 9.166963] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0D:00/input/input1
  448. [ 9.167050] ACPI: Lid Switch [LID]
  449. [ 9.167136] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
  450. [ 9.167197] ACPI: Power Button [PWRF]
  451. [ 9.167979] Monitor-Mwait will be used to enter C-1 state
  452. [ 9.167987] Monitor-Mwait will be used to enter C-2 state
  453. [ 9.167991] Monitor-Mwait will be used to enter C-3 state
  454. [ 9.167995] tsc: Marking TSC unstable due to TSC halts in idle
  455. [ 9.169186] thermal LNXTHERM:00: registered as thermal_zone0
  456. [ 9.169226] ACPI: Thermal Zone [THM0] (35 C)
  457. [ 9.170036] thermal LNXTHERM:01: registered as thermal_zone1
  458. [ 9.170079] ACPI: Thermal Zone [THM1] (26 C)
  459. [ 9.174576] brd: module loaded
  460. [ 9.177806] loop: module loaded
  461. [ 9.177952] libphy: Fixed MDIO Bus: probed
  462. [ 9.178115] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  463. [ 9.179491] ehci-pci: EHCI PCI platform driver
  464. [ 9.181074] ehci-pci 0000:00:1a.7: EHCI Host Controller
  465. [ 9.182549] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
  466. [ 9.183920] ehci-pci 0000:00:1a.7: debug port 1
  467. [ 9.185188] ACPI: Battery Slot [BAT0] (battery present)
  468. [ 9.186777] ACPI: Battery Slot [BAT1] (battery absent)
  469. [ 9.189174] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
  470. [ 9.189199] ehci-pci 0000:00:1a.7: irq 18, io mem 0xe1626000
  471. [ 9.197052] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
  472. [ 9.198458] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  473. [ 9.199792] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  474. [ 9.201114] usb usb1: Product: EHCI Host Controller
  475. [ 9.202415] usb usb1: Manufacturer: Linux 4.16.2-gentoo-gnu ehci_hcd
  476. [ 9.203706] usb usb1: SerialNumber: 0000:00:1a.7
  477. [ 9.205240] hub 1-0:1.0: USB hub found
  478. [ 9.206561] hub 1-0:1.0: 6 ports detected
  479. [ 9.208347] ehci-pci 0000:00:1d.7: EHCI Host Controller
  480. [ 9.209770] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
  481. [ 9.211119] ehci-pci 0000:00:1d.7: debug port 1
  482. [ 9.216354] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
  483. [ 9.216376] ehci-pci 0000:00:1d.7: irq 16, io mem 0xe1627000
  484. [ 9.224049] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
  485. [ 9.225457] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  486. [ 9.226789] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  487. [ 9.228108] usb usb2: Product: EHCI Host Controller
  488. [ 9.229438] usb usb2: Manufacturer: Linux 4.16.2-gentoo-gnu ehci_hcd
  489. [ 9.230773] usb usb2: SerialNumber: 0000:00:1d.7
  490. [ 9.232295] hub 2-0:1.0: USB hub found
  491. [ 9.233633] hub 2-0:1.0: 6 ports detected
  492. [ 9.235231] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  493. [ 9.236558] ohci-pci: OHCI PCI platform driver
  494. [ 9.237885] uhci_hcd: USB Universal Host Controller Interface driver
  495. [ 9.239388] uhci_hcd 0000:00:1a.0: UHCI Host Controller
  496. [ 9.240740] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
  497. [ 9.242010] uhci_hcd 0000:00:1a.0: detected 2 ports
  498. [ 9.243251] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00003020
  499. [ 9.244516] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  500. [ 9.245717] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  501. [ 9.246928] usb usb3: Product: UHCI Host Controller
  502. [ 9.248116] usb usb3: Manufacturer: Linux 4.16.2-gentoo-gnu uhci_hcd
  503. [ 9.249311] usb usb3: SerialNumber: 0000:00:1a.0
  504. [ 9.250646] hub 3-0:1.0: USB hub found
  505. [ 9.251857] hub 3-0:1.0: 2 ports detected
  506. [ 9.253316] uhci_hcd 0000:00:1a.1: UHCI Host Controller
  507. [ 9.254609] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
  508. [ 9.255834] uhci_hcd 0000:00:1a.1: detected 2 ports
  509. [ 9.257069] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00003040
  510. [ 9.258337] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
  511. [ 9.259546] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  512. [ 9.260751] usb usb4: Product: UHCI Host Controller
  513. [ 9.261955] usb usb4: Manufacturer: Linux 4.16.2-gentoo-gnu uhci_hcd
  514. [ 9.263151] usb usb4: SerialNumber: 0000:00:1a.1
  515. [ 9.264656] hub 4-0:1.0: USB hub found
  516. [ 9.265884] hub 4-0:1.0: 2 ports detected
  517. [ 9.267395] uhci_hcd 0000:00:1a.2: UHCI Host Controller
  518. [ 9.268664] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
  519. [ 9.269882] uhci_hcd 0000:00:1a.2: detected 2 ports
  520. [ 9.271092] uhci_hcd 0000:00:1a.2: irq 18, io base 0x00003060
  521. [ 9.272340] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
  522. [ 9.273534] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  523. [ 9.274726] usb usb5: Product: UHCI Host Controller
  524. [ 9.275926] usb usb5: Manufacturer: Linux 4.16.2-gentoo-gnu uhci_hcd
  525. [ 9.277137] usb usb5: SerialNumber: 0000:00:1a.2
  526. [ 9.278518] hub 5-0:1.0: USB hub found
  527. [ 9.279722] hub 5-0:1.0: 2 ports detected
  528. [ 9.281228] uhci_hcd 0000:00:1d.0: UHCI Host Controller
  529. [ 9.282513] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
  530. [ 9.283736] uhci_hcd 0000:00:1d.0: detected 2 ports
  531. [ 9.284962] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003080
  532. [ 9.286225] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
  533. [ 9.287433] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  534. [ 9.288635] usb usb6: Product: UHCI Host Controller
  535. [ 9.289843] usb usb6: Manufacturer: Linux 4.16.2-gentoo-gnu uhci_hcd
  536. [ 9.291072] usb usb6: SerialNumber: 0000:00:1d.0
  537. [ 9.292428] hub 6-0:1.0: USB hub found
  538. [ 9.293641] hub 6-0:1.0: 2 ports detected
  539. [ 9.295120] uhci_hcd 0000:00:1d.1: UHCI Host Controller
  540. [ 9.296394] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
  541. [ 9.297595] uhci_hcd 0000:00:1d.1: detected 2 ports
  542. [ 9.298789] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000030a0
  543. [ 9.300043] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
  544. [ 9.301234] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  545. [ 9.302418] usb usb7: Product: UHCI Host Controller
  546. [ 9.303609] usb usb7: Manufacturer: Linux 4.16.2-gentoo-gnu uhci_hcd
  547. [ 9.304792] usb usb7: SerialNumber: 0000:00:1d.1
  548. [ 9.306120] hub 7-0:1.0: USB hub found
  549. [ 9.307308] hub 7-0:1.0: 2 ports detected
  550. [ 9.308767] uhci_hcd 0000:00:1d.2: UHCI Host Controller
  551. [ 9.310034] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
  552. [ 9.311235] uhci_hcd 0000:00:1d.2: detected 2 ports
  553. [ 9.312443] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000030c0
  554. [ 9.313709] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
  555. [ 9.314899] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  556. [ 9.316100] usb usb8: Product: UHCI Host Controller
  557. [ 9.317296] usb usb8: Manufacturer: Linux 4.16.2-gentoo-gnu uhci_hcd
  558. [ 9.318478] usb usb8: SerialNumber: 0000:00:1d.2
  559. [ 9.319803] hub 8-0:1.0: USB hub found
  560. [ 9.320987] hub 8-0:1.0: 2 ports detected
  561. [ 9.322362] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
  562. [ 9.334479] serio: i8042 KBD port at 0x60,0x64 irq 1
  563. [ 9.335710] serio: i8042 AUX port at 0x60,0x64 irq 12
  564. [ 9.337078] mousedev: PS/2 mouse device common for all mice
  565. [ 9.338570] rtc_cmos 00:03: RTC can wake from S4
  566. [ 9.339990] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
  567. [ 9.341248] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
  568. [ 9.342514] device-mapper: uevent: version 1.0.3
  569. [ 9.343846] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
  570. [ 9.345125] hidraw: raw HID events driver (C) Jiri Kosina
  571. [ 9.346537] usbcore: registered new interface driver usbhid
  572. [ 9.347802] usbhid: USB HID core driver
  573. [ 9.349162] drop_monitor: Initializing network drop monitor service
  574. [ 9.350566] Initializing XFRM netlink socket
  575. [ 9.351894] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
  576. [ 9.353274] NET: Registered protocol family 10
  577. [ 9.354904] Segment Routing with IPv6
  578. [ 9.356222] NET: Registered protocol family 17
  579. [ 9.357748] microcode: sig=0x10676, pf=0x80, revision=0x0
  580. [ 9.359102] microcode: Microcode Update Driver: v2.2.
  581. [ 9.359268] registered taskstats version 1
  582. [ 9.361824] Loading compiled-in X.509 certificates
  583. [ 9.398547] Loaded X.509 cert 'Build time autogenerated kernel key: f3cacdca31fbcadc5b22af1dfb095641709df5ef'
  584. [ 9.399934] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
  585. [ 9.401934] rtc_cmos 00:03: setting system clock to 2018-05-07 14:29:29 UTC (1525703369)
  586. [ 9.407451] Freeing unused kernel memory: 1496K
  587. [ 9.408851] Write protecting the kernel read-only data: 16384k
  588. [ 9.411312] Freeing unused kernel memory: 2008K
  589. [ 9.416258] Freeing unused kernel memory: 920K
  590. [ 9.417626] rodata_test: all tests were successful
  591. [ 9.513012] clocksource: timekeeping watchdog on CPU0: Marking clocksource 'tsc-early' as unstable because the skew is too large:
  592. [ 9.513015] clocksource: 'hpet' wd_now: 88d627b wd_last: 7ce09fa mask: ffffffff
  593. [ 9.513018] clocksource: 'tsc-early' cs_now: 1bb256c406 cs_last: 1b6e1a8732 mask: ffffffffffffffff
  594. [ 9.513123] clocksource: Switched to clocksource hpet
  595. [ 10.172508] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
  596. [ 10.190000] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input5
  597. [ 10.289264] ahci 0000:00:1f.2: version 3.0
  598. [ 10.289551] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
  599. [ 10.289582] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
  600. [ 10.289587] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ccc
  601. [ 10.292361] scsi host0: ahci
  602. [ 10.292933] scsi host1: ahci
  603. [ 10.293439] scsi host2: ahci
  604. [ 10.293890] scsi host3: ahci
  605. [ 10.293964] ata1: SATA max UDMA/133 abar m2048@0xe1625000 port 0xe1625100 irq 24
  606. [ 10.293968] ata2: SATA max UDMA/133 abar m2048@0xe1625000 port 0xe1625180 irq 24
  607. [ 10.293970] ata3: DUMMY
  608. [ 10.293971] ata4: DUMMY
  609. [ 10.609067] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  610. [ 10.609403] ata1.00: ATA-8: INTEL SSDSA2BW160G3H, 4PC10365, max UDMA/133
  611. [ 10.609407] ata1.00: 312581808 sectors, multi 1: LBA48 NCQ (depth 31/32)
  612. [ 10.609796] ata1.00: configured for UDMA/133
  613. [ 10.610156] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2BW16 0365 PQ: 0 ANSI: 5
  614. [ 10.920799] ata2: SATA link down (SStatus 0 SControl 300)
  615. [ 10.989552] ata1.00: Enabling discard_zeroes_data
  616. [ 10.989664] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
  617. [ 10.989685] sd 0:0:0:0: [sda] Write Protect is off
  618. [ 10.989689] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  619. [ 10.989723] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  620. [ 10.989931] ata1.00: Enabling discard_zeroes_data
  621. [ 10.990588] sda: sda1 sda2 sda3 sda4
  622. [ 10.991167] ata1.00: Enabling discard_zeroes_data
  623. [ 10.991397] sd 0:0:0:0: [sda] Attached SCSI disk
  624. [ 11.001283] sd 0:0:0:0: Attached scsi generic sg0 type 0
  625. [ 11.570674] imm: Version 2.05 (for Linux 2.4.0)
  626. [ 11.712123] Fusion MPT base driver 3.04.20
  627. [ 11.712125] Copyright (c) 1999-2008 LSI Corporation
  628. [ 11.729796] Fusion MPT SPI Host driver 3.04.20
  629. [ 11.746440] Fusion MPT FC Host driver 3.04.20
  630. [ 11.763647] Fusion MPT SAS Host driver 3.04.20
  631. [ 11.772729] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
  632. [ 11.781446] 3ware Storage Controller device driver for Linux v1.26.02.003.
  633. [ 11.791287] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
  634. [ 11.896631] Adaptec aacraid driver 1.2.1[50877]-custom
  635. [ 11.922517] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
  636. [ 11.928231] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
  637. [ 11.950995] megasas: 07.704.04.00-rc1
  638. [ 12.035494] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 10.00.00.05-k.
  639. [ 12.118475] Emulex LightPulse Fibre Channel SCSI driver 11.4.0.6
  640. [ 12.118477] Copyright (C) 2017 Broadcom. All Rights Reserved. The term "Broadcom" refers to Broadcom Limited and/or its subsidiaries.
  641. [ 12.176258] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
  642. [ 12.310242] usbcore: registered new interface driver usb-storage
  643. [ 13.048038] raid6: sse2x1 gen() 2582 MB/s
  644. [ 13.065021] raid6: sse2x1 xor() 2660 MB/s
  645. [ 13.082024] raid6: sse2x2 gen() 3378 MB/s
  646. [ 13.099013] raid6: sse2x2 xor() 3253 MB/s
  647. [ 13.116013] raid6: sse2x4 gen() 4781 MB/s
  648. [ 13.133017] raid6: sse2x4 xor() 3626 MB/s
  649. [ 13.133019] raid6: using algorithm sse2x4 gen() 4781 MB/s
  650. [ 13.133020] raid6: .... xor() 3626 MB/s, rmw enabled
  651. [ 13.133022] raid6: using ssse3x2 recovery algorithm
  652. [ 13.136496] xor: measuring software checksum speed
  653. [ 13.146012] prefetch64-sse: 6180.000 MB/sec
  654. [ 13.156008] generic_sse: 5508.000 MB/sec
  655. [ 13.156010] xor: using function: prefetch64-sse (6180.000 MB/sec)
  656. [ 13.159594] async_tx: api initialized (async)
  657. [ 13.195899] device-mapper: raid: Loading target version 1.13.2
  658. [ 13.665752] Btrfs loaded, crc32c=crc32c-generic
  659. [ 13.746889] JFS: nTxBlock = 8192, nTxLock = 65536
  660. [ 13.770745] FS-Cache: Loaded
  661. [ 13.851269] RPC: Registered named UNIX socket transport module.
  662. [ 13.851271] RPC: Registered udp transport module.
  663. [ 13.851272] RPC: Registered tcp transport module.
  664. [ 13.851273] RPC: Registered tcp NFSv4.1 backchannel transport module.
  665. [ 13.975215] FS-Cache: Netfs 'nfs' registered for caching
  666. [ 14.218640] SGI XFS with ACLs, security attributes, no debug enabled
  667. [ 14.262913] fuse init (API version 7.26)
  668. [ 14.316181] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
  669. [ 14.316183] e1000: Copyright (c) 1999-2006 Intel Corporation.
  670. [ 14.340045] dca service started, version 1.12.1
  671. [ 14.372527] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
  672. [ 14.372529] igb: Copyright (c) 2007-2014 Intel Corporation.
  673. [ 14.387128] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
  674. [ 14.412539] sky2: driver version 1.30
  675. [ 14.463738] VMware vmxnet3 virtual NIC driver - version 1.4.13.0-k-NAPI
  676. [ 14.482580] Loading iSCSI transport class v2.0-870.
  677. [ 14.511476] iscsi: registered transport (tcp)
  678. [ 14.515151] random: crng init done
  679. [ 14.601305] cryptd: max_cpu_qlen set to 1000
  680. [ 14.734996] device-mapper: dm-log-userspace: version 1.3.0 loaded
  681. [ 14.754654] device-mapper: multipath queue-length: version 0.2.0 loaded
  682. [ 14.768761] device-mapper: multipath round-robin: version 1.2.0 loaded
  683. [ 14.778542] device-mapper: multipath service-time: version 0.3.0 loaded
  684. [ 53.551502] EXT2-fs (dm-2): error: couldn't mount because of unsupported optional features (2c0)
  685. [ 53.551748] EXT4-fs (dm-2): couldn't mount as ext3 due to feature incompatibilities
  686. [ 53.557585] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
  687. [ 55.375531] udevd[2772]: starting version 3.2.5
  688. [ 55.422666] udevd[2773]: starting eudev-3.2.5
  689. [ 55.707821] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
  690. [ 55.735552] acpi device:04: registered as cooling_device2
  691. [ 55.742562] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
  692. [ 55.965790] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
  693. [ 55.994261] Non-volatile memory driver v1.3
  694. [ 56.027408] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20180105/utaddress-247)
  695. [ 56.027417] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  696. [ 56.027421] ACPI Warning: SystemIO range 0x00000000000005B0-0x00000000000005BF conflicts with OpRegion 0x0000000000000580-0x00000000000005BB (\GPIO) (20180105/utaddress-247)
  697. [ 56.027427] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  698. [ 56.027428] ACPI Warning: SystemIO range 0x0000000000000580-0x00000000000005AF conflicts with OpRegion 0x0000000000000580-0x00000000000005BB (\GPIO) (20180105/utaddress-247)
  699. [ 56.027434] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  700. [ 56.027435] lpc_ich: Resource conflict(s) found affecting gpio_ich
  701. [ 56.040392] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  702. [ 56.040394] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  703. [ 56.040686] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
  704. [ 56.075378] thinkpad_acpi: ThinkPad ACPI Extras v0.25
  705. [ 56.075380] thinkpad_acpi: http://ibm-acpi.sf.net/
  706. [ 56.075382] thinkpad_acpi: ThinkPad BIOS CBET4000 3774c98, EC 7XHT24WW-3.6
  707. [ 56.075383] thinkpad_acpi: Lenovo ThinkPad X200, model 7454CTO
  708. [ 56.081299] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
  709. [ 56.081300] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
  710. [ 56.182063] input: PC Speaker as /devices/platform/pcspkr/input/input8
  711. [ 56.255819] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
  712. [ 56.256043] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
  713. [ 56.259490] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
  714. [ 56.325653] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1f:16:15:42:90
  715. [ 56.325657] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
  716. [ 56.327107] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 8, PBA No: 1008FF-0FF
  717. [ 56.429078] Error: Driver 'pcspkr' is already registered, aborting...
  718. [ 56.543164] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  719. [ 56.613124] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  720. [ 56.723061] iTCO_vendor_support: vendor-support=0
  721. [ 56.787821] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
  722. [ 56.787879] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0560)
  723. [ 56.805970] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
  724. [ 56.819819] e1000e 0000:00:19.0 enp0s25: renamed from eth0
  725. [ 56.980354] Error: Driver 'pcspkr' is already registered, aborting...
  726. [ 57.014107] snd_hda_codec_conexant hdaudioC0D0: CX20561 (Hermosa): BIOS auto-probing.
  727. [ 57.014674] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20561 (Hermosa): line_outs=1 (0x1a/0x0/0x0/0x0/0x0) type:speaker
  728. [ 57.014678] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
  729. [ 57.014681] snd_hda_codec_conexant hdaudioC0D0: hp_outs=2 (0x19/0x16/0x0/0x0/0x0)
  730. [ 57.014684] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0
  731. [ 57.014687] snd_hda_codec_conexant hdaudioC0D0: dig-out=0x1c/0x0
  732. [ 57.014689] snd_hda_codec_conexant hdaudioC0D0: inputs:
  733. [ 57.014692] snd_hda_codec_conexant hdaudioC0D0: Mic=0x18
  734. [ 57.014695] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x1d
  735. [ 57.014698] snd_hda_codec_conexant hdaudioC0D0: Dock Mic=0x17
  736. [ 57.015869] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
  737. [ 57.031778] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
  738. [ 57.032092] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
  739. [ 57.032181] input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
  740. [ 57.032265] input: HDA Intel Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
  741. [ 57.032346] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
  742. [ 58.242153] ath: phy0: Enable LNA combining
  743. [ 58.243648] ath: EEPROM regdomain: 0x60
  744. [ 58.243649] ath: EEPROM indicates we should expect a direct regpair map
  745. [ 58.243653] ath: Country alpha2 being used: 00
  746. [ 58.243654] ath: Regpair used: 0x60
  747. [ 58.266021] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  748. [ 58.268952] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc900003a0000, irq=17
  749. [ 58.272997] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
  750. [ 58.830151] pci 0000:00:00.0: Intel GM45 Chipset
  751. [ 58.830178] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
  752. [ 58.831281] pci 0000:00:00.0: detected 262144K stolen memory
  753. [ 58.831324] checking generic (d0000000 3f0000) vs hw (d0000000 10000000)
  754. [ 58.831326] fb: switching to inteldrmfb from EFI VGA
  755. [ 58.831382] Console: switching to colour dummy device 80x25
  756. [ 58.833452] [drm] Replacing VGA console driver
  757. [ 58.833514] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  758. [ 58.833515] [drm] Driver supports precise vblank timestamp query.
  759. [ 58.833525] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000c3fff window]
  760. [ 58.833531] caller pci_map_rom+0x58/0xe0 mapping multiple BARs
  761. [ 58.833535] i915 0000:00:02.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0x0000
  762. [ 58.833538] [drm] Failed to find VBIOS tables (VBT)
  763. [ 58.833849] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
  764. [ 58.890084] [drm] RC6 disabled, disabling runtime PM support
  765. [ 58.890263] EXT4-fs (dm-2): re-mounted. Opts: (null)
  766. [ 58.892669] [drm] Initialized i915 1.6.0 20171222 for 0000:00:02.0 on minor 0
  767. [ 59.074593] Adding 8388604k swap on /dev/mapper/gentoo-lvolswap. Priority:-2 extents:1 across:8388604k SS
  768. [ 59.151762] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
  769. [ 59.881229] fbcon: inteldrmfb (fb0) is primary device
  770. [ 60.195226] Console: switching to colour frame buffer device 160x50
  771. [ 60.215592] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
  772. [ 61.880276] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
  773. [ 498.442021] usb 4-2: new full-speed USB device number 2 using uhci_hcd
  774. [ 498.614071] usb 4-2: New USB device found, idVendor=0a5c, idProduct=2145
  775. [ 498.614075] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  776. [ 498.614078] usb 4-2: Product: ThinkPad Bluetooth with Enhanced Data Rate II
  777. [ 498.614081] usb 4-2: Manufacturer: Lenovo Computer Corp
  778. [ 499.036791] Bluetooth: Core ver 2.22
  779. [ 499.036823] NET: Registered protocol family 31
  780. [ 499.036825] Bluetooth: HCI device and connection manager initialized
  781. [ 499.037653] Bluetooth: HCI socket layer initialized
  782. [ 499.037657] Bluetooth: L2CAP socket layer initialized
  783. [ 499.037669] Bluetooth: SCO socket layer initialized
  784. [ 499.160469] usbcore: registered new interface driver btusb
  785. [ 499.182922] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
  786. [ 500.240624] wlp2s0: authenticate with d8:84:66:4c:72:18
  787. [ 500.254607] wlp2s0: send auth to d8:84:66:4c:72:18 (try 1/3)
  788. [ 500.257543] wlp2s0: authenticated
  789. [ 500.258042] wlp2s0: associate with d8:84:66:4c:72:18 (try 1/3)
  790. [ 500.260954] wlp2s0: RX AssocResp from d8:84:66:4c:72:18 (capab=0x411 status=0 aid=2)
  791. [ 500.261100] wlp2s0: associated
  792. [ 500.261180] ath: EEPROM regdomain: 0x8348
  793. [ 500.261181] ath: EEPROM indicates we should expect a country code
  794. [ 500.261183] ath: doing EEPROM country->regdmn map search
  795. [ 500.261184] ath: country maps to regdmn code: 0x3a
  796. [ 500.261186] ath: Country alpha2 being used: US
  797. [ 500.261187] ath: Regpair used: 0x3a
  798. [ 500.261189] ath: regdomain 0x8348 dynamically updated by country IE
  799. [ 500.304393] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
  800. [ 503.786040] device wlp2s0 entered promiscuous mode
  801. [ 781.030409] perf: interrupt took too long (2514 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
  802. [ 3420.946210] perf: interrupt took too long (3159 > 3142), lowering kernel.perf_event_max_sample_rate to 63000
  803. [ 3596.712412] usb 4-2: USB disconnect, device number 2
  804. [ 3597.354239] usb 4-2: new full-speed USB device number 3 using uhci_hcd
  805. [ 3597.521480] usb 4-2: New USB device found, idVendor=0a5c, idProduct=2145
  806. [ 3597.521485] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  807. [ 3597.521488] usb 4-2: Product: ThinkPad Bluetooth with Enhanced Data Rate II
  808. [ 3597.521490] usb 4-2: Manufacturer: Lenovo Computer Corp
  809. [ 3691.449988] wlp2s0: authenticate with d8:84:66:4c:d8:68
  810. [ 3691.468089] wlp2s0: send auth to d8:84:66:4c:d8:68 (try 1/3)
  811. [ 3691.470072] wlp2s0: authenticated
  812. [ 3691.471265] wlp2s0: associate with d8:84:66:4c:d8:68 (try 1/3)
  813. [ 3691.474310] wlp2s0: RX AssocResp from d8:84:66:4c:d8:68 (capab=0x411 status=0 aid=5)
  814. [ 3691.474422] wlp2s0: associated
  815. [ 3691.474539] ath: EEPROM regdomain: 0x8348
  816. [ 3691.474541] ath: EEPROM indicates we should expect a country code
  817. [ 3691.474543] ath: doing EEPROM country->regdmn map search
  818. [ 3691.474544] ath: country maps to regdmn code: 0x3a
  819. [ 3691.474546] ath: Country alpha2 being used: US
  820. [ 3691.474547] ath: Regpair used: 0x3a
  821. [ 3691.474549] ath: regdomain 0x8348 dynamically updated by country IE
  822. [ 3706.595001] wlp2s0: authenticate with d8:84:66:4c:aa:f8
  823. [ 3706.613071] wlp2s0: send auth to d8:84:66:4c:aa:f8 (try 1/3)
  824. [ 3706.614893] wlp2s0: authenticated
  825. [ 3706.616129] wlp2s0: associate with d8:84:66:4c:aa:f8 (try 1/3)
  826. [ 3706.618971] wlp2s0: RX AssocResp from d8:84:66:4c:aa:f8 (capab=0x411 status=0 aid=18)
  827. [ 3706.619166] wlp2s0: associated
  828. [ 3706.619523] ath: EEPROM regdomain: 0x8348
  829. [ 3706.619525] ath: EEPROM indicates we should expect a country code
  830. [ 3706.619527] ath: doing EEPROM country->regdmn map search
  831. [ 3706.619528] ath: country maps to regdmn code: 0x3a
  832. [ 3706.619530] ath: Country alpha2 being used: US
  833. [ 3706.619531] ath: Regpair used: 0x3a
  834. [ 3706.619533] ath: regdomain 0x8348 dynamically updated by country IE
  835. [ 3738.590513] wlp2s0: authenticate with d8:84:66:4c:aa:f8
  836. [ 3738.609081] wlp2s0: send auth to d8:84:66:4c:aa:f8 (try 1/3)
  837. [ 3738.712266] wlp2s0: send auth to d8:84:66:4c:aa:f8 (try 2/3)
  838. [ 3738.714503] wlp2s0: authenticated
  839. [ 3738.715136] wlp2s0: associate with d8:84:66:4c:aa:f8 (try 1/3)
  840. [ 3738.719292] wlp2s0: RX AssocResp from d8:84:66:4c:aa:f8 (capab=0x411 status=0 aid=18)
  841. [ 3738.719441] wlp2s0: associated
  842. [ 3738.719560] ath: EEPROM regdomain: 0x8348
  843. [ 3738.719562] ath: EEPROM indicates we should expect a country code
  844. [ 3738.719564] ath: doing EEPROM country->regdmn map search
  845. [ 3738.719565] ath: country maps to regdmn code: 0x3a
  846. [ 3738.719567] ath: Country alpha2 being used: US
  847. [ 3738.719568] ath: Regpair used: 0x3a
  848. [ 3738.719570] ath: regdomain 0x8348 dynamically updated by country IE
  849. [ 3754.689101] wlp2s0: authenticate with d8:84:66:4c:aa:f8
  850. [ 3754.707954] wlp2s0: send auth to d8:84:66:4c:aa:f8 (try 1/3)
  851. [ 3754.764802] wlp2s0: send auth to d8:84:66:4c:aa:f8 (try 2/3)
  852. [ 3754.823787] wlp2s0: send auth to d8:84:66:4c:aa:f8 (try 3/3)
  853. [ 3754.903262] wlp2s0: authentication with d8:84:66:4c:aa:f8 timed out
  854. [ 3777.199443] wlp2s0: authenticate with d8:84:66:4c:ec:38
  855. [ 3777.212641] wlp2s0: send auth to d8:84:66:4c:ec:38 (try 1/3)
  856. [ 3777.214860] wlp2s0: authenticated
  857. [ 3777.216141] wlp2s0: associate with d8:84:66:4c:ec:38 (try 1/3)
  858. [ 3777.220157] wlp2s0: RX AssocResp from d8:84:66:4c:ec:38 (capab=0x411 status=0 aid=5)
  859. [ 3777.220305] wlp2s0: associated
  860. [ 3777.220429] ath: EEPROM regdomain: 0x8348
  861. [ 3777.220431] ath: EEPROM indicates we should expect a country code
  862. [ 3777.220433] ath: doing EEPROM country->regdmn map search
  863. [ 3777.220434] ath: country maps to regdmn code: 0x3a
  864. [ 3777.220436] ath: Country alpha2 being used: US
  865. [ 3777.220437] ath: Regpair used: 0x3a
  866. [ 3777.220439] ath: regdomain 0x8348 dynamically updated by country IE
  867. [ 3800.542680] wlp2s0: authenticate with d8:84:66:4c:d5:38
  868. [ 3800.555903] wlp2s0: send auth to d8:84:66:4c:d5:38 (try 1/3)
  869. [ 3800.557709] wlp2s0: authenticated
  870. [ 3800.559128] wlp2s0: associate with d8:84:66:4c:d5:38 (try 1/3)
  871. [ 3800.562044] wlp2s0: RX AssocResp from d8:84:66:4c:d5:38 (capab=0x411 status=0 aid=1)
  872. [ 3800.562194] wlp2s0: associated
  873. [ 3800.562411] ath: EEPROM regdomain: 0x8348
  874. [ 3800.562413] ath: EEPROM indicates we should expect a country code
  875. [ 3800.562414] ath: doing EEPROM country->regdmn map search
  876. [ 3800.562416] ath: country maps to regdmn code: 0x3a
  877. [ 3800.562417] ath: Country alpha2 being used: US
  878. [ 3800.562419] ath: Regpair used: 0x3a
  879. [ 3800.562420] ath: regdomain 0x8348 dynamically updated by country IE
  880. [ 4166.020988] perf: interrupt took too long (3961 > 3948), lowering kernel.perf_event_max_sample_rate to 50000
  881. [ 4654.851460] MediaPl~back #1[8673]: segfault at 7fcb753059e0 ip 00007fcb753059e0 sp 00007fd614f45b38 error 14 in libicudata.so.58.2[7fcb7552f000+1901000]
  882.  
Powered by spacepaste. Paste removal.