spacepaste

Paste details

reply | raw

  1.  
  2. U-Boot SPL 2018.07-armbian (Aug 29 2018 - 15:05:30 +0200)
  3. Returning to boot ROM...
  6. U-Boot 2018.07-armbian (Aug 29 2018 - 15:05:30 +0200)
  8. Model: Tinker-RK3288
  9. DRAM: 2 GiB
  10. PC event = 0x0
  11. usb_current_limit_ctrl: unlock_current = 0
  12. MMC: dwmmc@ff0c0000: 1, dwmmc@ff0f0000: 0
  13. Loading Environment from EXT4... *** Warning - bad CRC, using default environment
  15. Failed (-5)
  16. In: serial
  17. Out: serial
  18. Err: serial
  19. Model: Tinker-RK3288
  20. Net: eth0: ethernet@ff290000
  21. Hit any key to stop autoboot: 0
  22. =>
  23. =>
  24. =>
  25. =>
  26. => if test -n ${distro_bootpart}; then setenv bootpart ${distro_bootpart}; else setenv bootpart 1; fi
  27. =>
  28. => echo ${distro_bootpart}
  30. => setenv bootpart 1
  31. => echo ${distro_bootpart}
  33. => echo ${bootpart}
  34. 1
  35. => echo ${devtype}
  37. => setenv mmc
  38. => setenv devtype mmc
  39. => setenv devnum 0
  40. => part uuid ${devtype} ${devnum}:${bootpart} uuid
  41. => echo ${uuid}
  42. 89e2f1d4-01
  43. etenv bootargs "console=ttyS2,115200n8 root=PARTUUID=${uuid} rw rootwait usbstoragequirks=0tenv bootargs "console=ttyS2,115200n8 root=PARTUUID=${uuid} rw rootwait usbstoragequirks=0xenv bootargs "console=ttyS2,115200n8 root=PARTUUID=${uuid} rw rootwait usbstoragequirks=0x2nv bootargs "console=ttyS2,115200n8 root=PARTUUID=${uuid} rw rootwait usbstoragequirks=0x25v bootargs "console=ttyS2,115200n8 root=PARTUUID=${uuid} rw rootwait usbstoragequirks=0x253 bootargs "console=ttyS2,115200n8 root=PARTUUID=${uuid} rw rootwait usbstoragequirks=0x2537bootargs "console=ttyS2,115200n8 root=PARTUUID=${uuid} rw rootwait usbstoragequirks=0x2537:ootargs "console=ttyS2,115200n8 root=PARTUUID=${uuid} rw rootwait usbstoragequirks=0x2537:0otargs "console=ttyS2,115200n8 root=PARTUUID=${uuid} rw rootwait usbstoragequirks=0x2537:0xtargs "console=ttyS2,115200n8 root=PARTUUID=${uuid} rw rootwait usbstoragequirks=0x2537:0x1args "console=ttyS2,115200n8 root=PARTUUID=${uuid} rw rootwait usbstoragequirks=0x2537:0x10rgs "console=ttyS2,115200n8 root=PARTUUID=${uuid} rw rootwait usbstoragequirks=0x2537:0x106gs "console=ttyS2,115200n8 root=PARTUUID=${uuid} rw rootwait usbstoragequirks=0x2537:0x1066s "console=ttyS2,115200n8 root=PARTUUID=${uuid} rw rootwait usbstoragequirks=0x2537:0x1066: "console=ttyS2,115200n8 root=PARTUUID=${uuid} rw rootwait usbstoragequirks=0x2537:0x1066:u"console=ttyS2,115200n8 root=PARTUUID=${uuid} rw rootwait usbstoragequirks=0x2537:0x1066:u,console=ttyS2,115200n8 root=PARTUUID=${uuid} rw rootwait usbstoragequirks=0x2537:0x1066:u,0onsole=ttyS2,115200n8 root=PARTUUID=${uuid} rw rootwait usbstoragequirks=0x2537:0x1066:u,0xnsole=ttyS2,115200n8 root=PARTUUID=${uuid} rw rootwait usbstoragequirks=0x2537:0x1066:u,0x2
  44. setenv bootargs "console=ttyS2,115200n8 root=PARTUUID=${uuid} rw rootwait usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u"
  45. => load ${devtype} ${devnum}:${bootpart} ${kernel_addr_r} /boot/zImage
  46. 6311112 bytes read in 148 ms (40.7 MiB/s)
  47. => setenv fdt_file rk3288-miniarm.dtb
  48. => load ${devtype} ${devnum}:${bootpart} ${fdt_addr_r} /boot/dtb/${fdtfile}
  49. 50914 bytes read in 4 ms (12.1 MiB/s)
  50. => fdt addr ${fdt_addr_r}
  51. => fdt set /dwmmc@ff0c0000 broken-cd
  52. libfdt fdt_setprop(): FDT_ERR_NOSPACE
  53. => fdt resize
  54. => fdt set /dwmmc@ff0c0000 broken-cd
  55. => ftd set /usb@ff500000 no-relinquish-port
  56. Unknown command 'ftd' - try 'help'
  57. => fdt set /usb@ff500000 no-relinquish-port
  58. => load ${devtype} ${devnum}:${bootpart} ${ramdisk_addr_r} /boot/initramfs-linux.img
  59. 5641462 bytes read in 134 ms (40.1 MiB/s)
  60. => bootz ${kernel_addr_r} ${ramdisk_addr_r}:${filesize} ${fdt_addr_r}
  61. ## Flattened Device Tree blob at 01f00000
  62. Booting using the fdt blob at 0x1f00000
  63. Loading Ramdisk to 0fa9e000, end 0ffff4f6 ... OK
  64. reserving fdt memory region: addr=1f00000 size=d000
  65. Loading Device Tree to 0fa8e000, end 0fa9dfff ... OK
  67. Starting kernel ...
  69. [ 0.000000] Booting Linux on physical CPU 0x500
  70. [ 0.000000] Linux version 4.18.13-1-ARCH (builduser@leming) (gcc version 8.2.0 (GCC)) #1 SMP PREEMPT Thu Oct 11 02:22:56 UTC 2018
  71. [ 0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d
  72. [ 0.000000] CPU: div instructions available: patching division code
  73. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  74. [ 0.000000] OF: fdt: Machine model: Rockchip RK3288 Tinker Board
  75. [ 0.000000] Memory policy: Data cache writealloc
  76. [ 0.000000] cma: Reserved 48 MiB at 0x7d000000
  77. [ 0.000000] random: get_random_bytes called from start_kernel+0x8c/0x480 with crng_init=0
  78. [ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s38092 r8192 d23348 u69632
  79. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560
  80. [ 0.000000] Kernel command line: console=ttyS2,115200n8 root=PARTUUID=89e2f1d4-01 rw rootwait usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u
  81. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  82. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  83. [ 0.000000] Memory: 2001352K/2097152K available (12288K kernel code, 1041K rwdata, 4900K rodata, 1024K init, 882K bss, 46648K reserved, 49152K cma-reserved, 1261568K highmem)
  84. [ 0.000000] Virtual kernel memory layout:
  85. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  86. [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  87. [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
  88. [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
  89. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  90. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  91. [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (13280 kB)
  92. [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB)
  93. [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) (1042 kB)
  94. [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 883 kB)
  95. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  96. [ 0.000000] Preemptible hierarchical RCU implementation.
  97. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  98. [ 0.000000] Tasks RCU enabled.
  99. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  100. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  101. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  102. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  103. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  104. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  105. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  106. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  107. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  108. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  109. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  110. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  111. [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  112. [ 0.000024] Switching to timer-based delay loop, resolution 41ns
  113. [ 0.004671] Console: colour dummy device 80x30
  114. [ 0.004713] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
  115. [ 0.004733] pid_max: default: 32768 minimum: 301
  116. [ 0.004972] Security Framework initialized
  117. [ 0.005181] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  118. [ 0.005201] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  119. [ 0.006139] CPU: Testing write buffer coherency: ok
  120. [ 0.006177] CPU0: Spectre v2: using BPIALL workaround
  121. [ 0.006496] CPU0: thread -1, cpu 0, socket 5, mpidr 80000500
  122. [ 0.060004] Setting up static identity map for 0x300000 - 0x3000a0
  123. [ 0.080007] Hierarchical SRCU implementation.
  124. [ 0.140149] smp: Bringing up secondary CPUs ...
  125. [ 0.241633] CPU1: thread -1, cpu 1, socket 5, mpidr 80000501
  126. [ 0.241641] CPU1: Spectre v2: using BPIALL workaround
  127. [ 0.341839] CPU2: thread -1, cpu 2, socket 5, mpidr 80000502
  128. [ 0.341847] CPU2: Spectre v2: using BPIALL workaround
  129. [ 0.442058] CPU3: thread -1, cpu 3, socket 5, mpidr 80000503
  130. [ 0.442066] CPU3: Spectre v2: using BPIALL workaround
  131. [ 0.442240] smp: Brought up 1 node, 4 CPUs
  132. [ 0.442257] SMP: Total of 4 processors activated (192.00 BogoMIPS).
  133. [ 0.442268] CPU: All CPU(s) started in SVC mode.
  134. [ 0.443735] devtmpfs: initialized
  135. [ 0.455010] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0
  136. [ 0.455455] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  137. [ 0.455480] futex hash table entries: 1024 (order: 4, 65536 bytes)
  138. [ 0.457242] xor: measuring software checksum speed
  139. [ 0.550947] arm4regs : 1049.200 MB/sec
  140. [ 0.651045] 8regs : 808.800 MB/sec
  141. [ 0.751143] 32regs : 786.400 MB/sec
  142. [ 0.851240] neon : 1395.600 MB/sec
  143. [ 0.851251] xor: using function: neon (1395.600 MB/sec)
  144. [ 0.851311] pinctrl core: initialized pinctrl subsystem
  145. [ 0.853349] NET: Registered protocol family 16
  146. [ 0.856121] DMA: preallocated 256 KiB pool for atomic coherent allocations
  147. [ 0.857045] audit: initializing netlink subsys (disabled)
  148. [ 0.857275] audit: type=2000 audit(0.850:1): state=initialized audit_enabled=0 res=1
  149. [ 0.858992] cpuidle: using governor menu
  150. [ 0.859686] No ATAGs?
  151. [ 0.859854] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  152. [ 0.859873] hw-breakpoint: maximum watchpoint size is 4 bytes.
  153. [ 0.861150] Serial: AMBA PL011 UART driver
  154. [ 1.072027] raid6: int32x1 gen() 94 MB/s
  155. [ 1.241980] raid6: int32x1 xor() 107 MB/s
  156. [ 1.412162] raid6: int32x2 gen() 117 MB/s
  157. [ 1.582265] raid6: int32x2 xor() 136 MB/s
  158. [ 1.752643] raid6: int32x4 gen() 164 MB/s
  159. [ 1.922502] raid6: int32x4 xor() 143 MB/s
  160. [ 2.092581] raid6: int32x8 gen() 192 MB/s
  161. [ 2.262826] raid6: int32x8 xor() 140 MB/s
  162. [ 2.432968] raid6: neonx1 gen() 351 MB/s
  163. [ 2.603048] raid6: neonx1 xor() 471 MB/s
  164. [ 2.773323] raid6: neonx2 gen() 433 MB/s
  165. [ 2.943354] raid6: neonx2 xor() 630 MB/s
  166. [ 3.113551] raid6: neonx4 gen() 681 MB/s
  167. [ 3.283667] raid6: neonx4 xor() 710 MB/s
  168. [ 3.453846] raid6: neonx8 gen() 643 MB/s
  169. [ 3.623934] raid6: neonx8 xor() 634 MB/s
  170. [ 3.623946] raid6: using algorithm neonx4 gen() 681 MB/s
  171. [ 3.623955] raid6: .... xor() 710 MB/s, rmw enabled
  172. [ 3.623966] raid6: using neon recovery algorithm
  173. [ 3.634381] vgaarb: loaded
  174. [ 3.635301] SCSI subsystem initialized
  175. [ 3.635786] usbcore: registered new interface driver usbfs
  176. [ 3.635850] usbcore: registered new interface driver hub
  177. [ 3.635941] usbcore: registered new device driver usb
  178. [ 3.637797] media: Linux media interface: v0.10
  179. [ 3.637841] videodev: Linux video capture interface: v2.00
  180. [ 3.637909] pps_core: LinuxPPS API ver. 1 registered
  181. [ 3.637921] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  182. [ 3.637946] PTP clock support registered
  183. [ 3.637985] EDAC MC: Ver: 3.0.0
  184. [ 3.639082] Advanced Linux Sound Architecture Driver Initialized.
  185. [ 3.639605] NetLabel: Initializing
  186. [ 3.639618] NetLabel: domain hash size = 128
  187. [ 3.639628] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
  188. [ 3.639713] NetLabel: unlabeled traffic allowed by default
  189. [ 3.640121] clocksource: Switched to clocksource arch_sys_counter
  190. [ 3.640331] VFS: Disk quotas dquot_6.6.0
  191. [ 3.640414] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  192. [ 3.652541] NET: Registered protocol family 2
  193. [ 3.653360] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
  194. [ 3.653406] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  195. [ 3.653491] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  196. [ 3.653683] TCP: Hash tables configured (established 8192 bind 8192)
  197. [ 3.653806] UDP hash table entries: 512 (order: 2, 16384 bytes)
  198. [ 3.653858] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  199. [ 3.654124] NET: Registered protocol family 1
  200. [ 3.664800] RPC: Registered named UNIX socket transport module.
  201. [ 3.664815] RPC: Registered udp transport module.
  202. [ 3.664825] RPC: Registered tcp transport module.
  203. [ 3.664835] RPC: Registered tcp NFSv4.1 backchannel transport module.
  204. [ 3.665335] Unpacking initramfs...
  205. [ 4.150090] Freeing initrd memory: 5512K
  206. [ 4.151076] hw perfevents: enabled with armv7_cortex_a12 PMU driver, 7 counters available
  207. [ 4.153453] Initialise system trusted keyrings
  208. [ 4.153650] workingset: timestamp_bits=14 max_order=19 bucket_order=5
  209. [ 4.158841] zbud: loaded
  210. [ 4.161277] NFS: Registering the id_resolver key type
  211. [ 4.161312] Key type id_resolver registered
  212. [ 4.161324] Key type id_legacy registered
  213. [ 4.161347] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  214. [ 4.170002] Key type asymmetric registered
  215. [ 4.170019] Asymmetric key parser 'x509' registered
  216. [ 4.170089] bounce: pool size: 64 pages
  217. [ 4.170265] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
  218. [ 4.170455] io scheduler noop registered
  219. [ 4.170470] io scheduler deadline registered
  220. [ 4.170644] io scheduler cfq registered (default)
  221. [ 4.170659] io scheduler mq-deadline registered
  222. [ 4.170670] io scheduler kyber registered
  223. [ 4.170919] io scheduler bfq registered
  224. [ 4.197184] dma-pl330 ff250000.dma-controller: Loaded driver for PL330 DMAC-241330
  225. [ 4.197206] dma-pl330 ff250000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
  226. [ 4.197972] dma-pl330 ffb20000.dma-controller: Loaded driver for PL330 DMAC-241330
  227. [ 4.197992] dma-pl330 ffb20000.dma-controller: DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10
  228. [ 4.204991] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled
  229. [ 4.208395] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 33, base_baud = 1500000) is a 16550A
  230. [ 4.209412] ff190000.serial: ttyS1 at MMIO 0xff190000 (irq = 34, base_baud = 1500000) is a 16550A
  231. [ 4.210508] ff690000.serial: ttyS2 at MMIO 0xff690000 (irq = 35, base_baud = 1500000) is a 16550A
  232. [ 5.233348] console [ttyS2] enabled
  233. [ 5.238254] ff1b0000.serial: ttyS3 at MMIO 0xff1b0000 (irq = 36, base_baud = 1500000) is a 16550A
  234. [ 5.249229] ff1c0000.serial: ttyS4 at MMIO 0xff1c0000 (irq = 37, base_baud = 1500000) is a 16550A
  235. [ 5.260772] Serial: AMBA driver
  236. [ 5.278819] loop: module loaded
  237. [ 5.283737] Loading iSCSI transport class v2.0-870.
  238. [ 5.289605] iscsi: registered transport (tcp)
  239. [ 5.301645] libphy: Fixed MDIO Bus: probed
  240. [ 5.310360] dwc2 ff540000.usb: ff540000.usb supply vusb_d not found, using dummy regulator
  241. [ 5.319687] dwc2 ff540000.usb: ff540000.usb supply vusb_a not found, using dummy regulator
  242. [ 5.390520] dwc2 ff540000.usb: DWC OTG Controller
  243. [ 5.395822] dwc2 ff540000.usb: new USB bus registered, assigned bus number 1
  244. [ 5.403775] dwc2 ff540000.usb: irq 42, io mem 0xff540000
  245. [ 5.410020] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
  246. [ 5.419300] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  247. [ 5.427402] usb usb1: Product: DWC OTG Controller
  248. [ 5.432683] usb usb1: Manufacturer: Linux 4.18.13-1-ARCH dwc2_hsotg
  249. [ 5.439692] usb usb1: SerialNumber: ff540000.usb
  250. [ 5.445478] hub 1-0:1.0: USB hub found
  251. [ 5.449730] hub 1-0:1.0: 1 port detected
  252. [ 5.454880] dwc2 ff580000.usb: ff580000.usb supply vusb_d not found, using dummy regulator
  253. [ 5.464258] dwc2 ff580000.usb: ff580000.usb supply vusb_a not found, using dummy regulator
  254. [ 5.610211] dwc2 ff580000.usb: EPs: 10, dedicated fifos, 972 entries in SPRAM
  255. [ 5.618671] dwc2 ff580000.usb: DWC OTG Controller
  256. [ 5.624000] dwc2 ff580000.usb: new USB bus registered, assigned bus number 2
  257. [ 5.631942] dwc2 ff580000.usb: irq 43, io mem 0xff580000
  258. [ 5.638101] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
  259. [ 5.647381] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  260. [ 5.655485] usb usb2: Product: DWC OTG Controller
  261. [ 5.660771] usb usb2: Manufacturer: Linux 4.18.13-1-ARCH dwc2_hsotg
  262. [ 5.667781] usb usb2: SerialNumber: ff580000.usb
  263. [ 5.673656] hub 2-0:1.0: USB hub found
  264. [ 5.677898] hub 2-0:1.0: 1 port detected
  265. [ 5.683701] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  266. [ 5.691045] ehci-pci: EHCI PCI platform driver
  267. [ 5.696063] ehci-platform: EHCI generic platform driver
  268. [ 5.702183] ehci-platform ff500000.usb: EHCI Host Controller
  269. [ 5.708537] ehci-platform ff500000.usb: new USB bus registered, assigned bus number 3
  270. [ 5.717531] ehci-platform ff500000.usb: irq 41, io mem 0xff500000
  271. [ 5.890172] usb 1-1: new high-speed USB device number 2 using dwc2
  272. [ 5.920168] ehci-platform ff500000.usb: USB 2.0 started, EHCI 1.00
  273. [ 5.927338] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
  274. [ 5.936620] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  275. [ 5.944724] usb usb3: Product: EHCI Host Controller
  276. [ 5.950201] usb usb3: Manufacturer: Linux 4.18.13-1-ARCH ehci_hcd
  277. [ 5.957016] usb usb3: SerialNumber: ff500000.usb
  278. [ 5.962766] hub 3-0:1.0: USB hub found
  279. [ 5.967017] hub 3-0:1.0: 1 port detected
  280. [ 5.972097] ehci-mxc: Freescale On-Chip EHCI Host driver
  281. [ 5.978164] ehci-omap: OMAP-EHCI Host Controller driver
  282. [ 5.984230] ehci-orion: EHCI orion driver
  283. [ 5.988922] ehci-exynos: EHCI EXYNOS driver
  284. [ 5.993941] tegra-ehci: Tegra EHCI driver
  285. [ 5.998642] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  286. [ 6.005611] ohci-pci: OHCI PCI platform driver
  287. [ 6.010678] ohci-platform: OHCI generic platform driver
  288. [ 6.016765] ohci-exynos: OHCI EXYNOS driver
  289. [ 6.022274] usbcore: registered new interface driver uas
  290. [ 6.028323] usbcore: registered new interface driver usb-storage
  291. [ 6.035129] usbcore: registered new interface driver ums-cypress
  292. [ 6.041929] usbcore: registered new interface driver ums_eneub6250
  293. [ 6.048883] usbcore: registered new interface driver ums-freecom
  294. [ 6.055687] usbcore: registered new interface driver ums-isd200
  295. [ 6.062379] usbcore: registered new interface driver ums-usbat
  296. [ 6.077002] i2c /dev entries driver
  297. [ 6.084624] rk808 0-001b: chip id: 0x0
  298. [ 6.093335] DCDC_REG1: supplied by vcc_sys
  299. [ 6.098987] DCDC_REG2: supplied by vcc_sys
  300. [ 6.104496] DCDC_REG3: supplied by vcc_sys
  301. [ 6.109385] DCDC_REG4: supplied by vcc_sys
  302. [ 6.114773] LDO_REG1: supplied by vcc_sys
  303. [ 6.120727] LDO_REG2: supplied by vcc_sys
  304. [ 6.126380] LDO_REG3: supplied by vcc_sys
  305. [ 6.132166] LDO_REG4: supplied by vcc_io
  306. [ 6.137847] LDO_REG5: supplied by vcc_io
  307. [ 6.143179] LDO_REG6: supplied by vcc_io
  308. [ 6.148874] LDO_REG7: supplied by vcc_sys
  309. [ 6.154721] LDO_REG8: supplied by vcc_sys
  310. [ 6.160401] SWITCH_REG1: supplied by vcc_io
  311. [ 6.165432] SWITCH_REG2: supplied by vcc_io
  312. [ 6.171778] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98
  313. [ 6.180983] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  314. [ 6.188976] usb 1-1: Product: USB2.0 Hub
  315. [ 6.194249] hub 1-1:1.0: USB hub found
  316. [ 6.198815] hub 1-1:1.0: 4 ports detected
  317. [ 6.204129] random: fast init done
  318. [ 6.208528] rk808-rtc rk808-rtc: registered as rtc0
  319. [ 6.221613] rockchip-thermal ff280000.tsadc: Missing rockchip,grf property
  320. [ 6.234524] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 500000 KHz
  321. [ 6.243089] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz
  322. [ 6.253677] sdhci: Secure Digital Host Controller Interface driver
  323. [ 6.260591] sdhci: Copyright(c) Pierre Ossman
  324. [ 6.265890] Synopsys Designware Multimedia Card Interface Driver
  325. [ 6.273191] dwmmc_rockchip ff0c0000.dwmmc: IDMAC supports 32-bit address mode.
  326. [ 6.281307] dwmmc_rockchip ff0c0000.dwmmc: Using internal DMA controller.
  327. [ 6.288893] dwmmc_rockchip ff0c0000.dwmmc: Version ID is 270a
  328. [ 6.295338] dwmmc_rockchip ff0c0000.dwmmc: DW MMC controller at irq 30,32 bit host data width,256 deep fifo
  329. [ 6.306330] mmc_host mmc0: card is polling.
  330. [ 6.323644] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  331. [ 6.340120] usb 3-1: new high-speed USB device number 2 using ehci-platform
  332. [ 6.346626] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
  333. [ 6.348092] usbcore: registered new interface driver vub300
  334. [ 6.361554] usbcore: registered new interface driver ushc
  335. [ 6.367925] sdhci-pltfm: SDHCI platform and OF driver helper
  336. [ 6.375325] ledtrig-cpu: registered to indicate activity on CPUs
  337. [ 6.382265] hidraw: raw HID events driver (C) Jiri Kosina
  338. [ 6.388421] usbcore: registered new interface driver usbhid
  339. [ 6.394664] usbhid: USB HID core driver
  340. [ 6.401246] NET: Registered protocol family 10
  341. [ 6.414141] Segment Routing with IPv6
  342. [ 6.418281] mip6: Mobile IPv6
  343. [ 6.421631] NET: Registered protocol family 17
  344. [ 6.426696] Key type dns_resolver registered
  345. [ 6.431550] ThumbEE CPU extension supported.
  346. [ 6.436319] Registering SWP/SWPB emulation handler
  347. [ 6.441964] registered taskstats version 1
  348. [ 6.446549] Loading compiled-in X.509 certificates
  349. [ 6.451960] zswap: loaded using pool lzo/zbud
  350. [ 6.457565] Btrfs loaded, crc32c=crc32c-generic
  351. [ 6.471369] input: gpio-keys as /devices/platform/gpio-keys/input/input0
  352. [ 6.479428] rk808-rtc rk808-rtc: setting system clock to 2013-01-18 09:00:04 UTC (1358499604)
  353. [ 6.488981] sr_init: No PMIC hook to init smartreflex
  354. [ 6.495256] vcc_sd: supplied by vcc_io
  355. [ 6.499492] vcc_sd: disabling
  356. [ 6.502836] ALSA device list:
  357. [ 6.506159] No soundcards found.
  358. [ 6.510074] ttyS2 - failed to request DMA
  359. [ 6.515038] Freeing unused kernel memory: 1024K
  360. [ 6.519692] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
  361. [ 6.531149] mmc0: new high speed SDHC card at address 0007
  362. [ 6.538047] mmcblk0: mmc0:0007 SD16G 14.4 GiB
  363. :: running early hook [udev]
  364. Warning: /lib/modules/4.18.13-1-ARCH/modules.devname not found -[ 6.554512] mmcblk0: p1 p2 p3
  365. ignoring
  366. starting version 239
  367. :: running hook [udev]
  368. :: Triggering uevents...
  369. [ 6.737681] usb 3-1: config 1 has an invalid interface number: 255 but max is 6
  370. [ 6.746036] usb 3-1: config 1 has no interface number 6
  371. [ 6.753655] usb 3-1: New USB device found, idVendor=0bda, idProduct=481a, bcdDevice= 0.00
  372. [ 6.762830] usb 3-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
  373. [ 6.771258] usb 3-1: Product: USB Audio
  374. [ 6.775558] usb 3-1: Manufacturer: Generic
  375. [ 6.780154] usb 3-1: SerialNumber: 201405280001
  376. [ 6.791912] input: Generic USB Audio Consumer Control as /devices/platform/ff500000.usb/usb3/3-1/3-1:1.255/0003:0BDA:481A.0001/input/input1
  377. [ 6.870250] input: Generic USB Audio as /devices/platform/ff500000.usb/usb3/3-1/3-1:1.255/0003:0BDA:481A.0001/input/input2
  378. [ 6.883188] hid-generic 0003:0BDA:481A.0001: input,hiddev0,hidraw0: USB HID v1.11 Device [Generic USB Audio] on usb-ff500000.usb-1/input255
  379. Waiting 10 seconds for device /dev/disk/by-partuuid/89e2f1d4-01 ...
  380. ERROR: device 'PARTUUID=89e2f1d4-01' not found. Skipping fsck.
  381. :: mounting 'PARTUUID=89e2f1d4-01' on real root
  382. mount: /new_root: can't find PARTUUID=89e2f1d4-01.
  383. You are now being dropped into an emergency shell.
  384. sh: can't access tty; job control turned off
  385. [rootfs ]# cat /proc/partitions
  386. major minor #blocks name
  388. 179 0 15126528 mmcblk0
  389. 179 1 65536 mmcblk0p1
  390. 179 2 4096000 mmcblk0p2
  391. 179 3 10960896 mmcblk0p3
  392. [rootfs ]# reboot
  393. [rootfs ]# reboot
  394. [rootfs ]#
  395. U-Boot SPL 2018.07-armbian (Aug 29 2018 - 15:05:30 +0200)
  396. Returning to boot ROM...
  399. U-Boot 2018.07-armbian (Aug 29 2018 - 15:05:30 +0200)
  401. Model: Tinker-RK3288
  402. DRAM: 2 GiB
  403. PC event = 0x0
  404. usb_current_limit_ctrl: unlock_current = 0
  405. MMC: dwmmc@ff0c0000: 1, dwmmc@ff0f0000: 0
  406. Loading Environment from EXT4... *** Warning - bad CRC, using default environment
  408. Failed (-5)
  409. In: serial
  410. Out: serial
  411. Err: serial
  412. Model: Tinker-RK3288
  413. Net: eth0: ethernet@ff290000
  414. Hit any key to stop autoboot: 0
  415. =>
  416. =>
  417. =>
  418. =>
  419. => ls mmc 0:1
  420. <DIR> 4096 .
  421. <DIR> 4096 ..
  422. <DIR> 16384 lost+found
  423. <DIR> 4096 srv
  424. <DIR> 4096 home
  425. <DIR> 4096 dev
  426. <DIR> 4096 etc
  427. <DIR> 4096 run
  428. <DIR> 4096 sys
  429. <DIR> 4096 var
  430. <DIR> 4096 usr
  431. <DIR> 4096 tmp
  432. <SYM> 7 sbin
  433. <DIR> 4096 proc
  434. <DIR> 4096 root
  435. <DIR> 4096 mnt
  436. <SYM> 7 bin
  437. <DIR> 4096 opt
  438. <SYM> 7 lib
  439. <DIR> 4096 boot
  440. => ls mmc 0:1 /boot
  441. <DIR> 4096 .
  442. <DIR> 4096 ..
  443. 5641462 initramfs-linux.img
  444. 6311112 zImage
  445. 847 boot.scr
  446. <SYM> 22 uInitrd
  447. 239 mkscr
  448. 153 armbianEnv.txt
  449. 3741218 uInitrd-4.14.67-rockchip
  450. 8693760 vmlinuz-4.14.67-rockchip
  451. 1460 boot.txt
  452. <DIR> 4096 dtb
  453. 153 boot.env
  454. 5016719 initramfs-linux.img.gz
  455. => set bootpart 1
  456. Unknown command 'set' - try 'help'
  457. => setenv bootpart 1
  458. => setenve devtype mmc
  459. Unknown command 'setenve' - try 'help'
  460. => setenv devtype mmc
  461. => setenv devnum 0
  462. => ls ${devtype} ${devnum}:${bootpart}
  463. <DIR> 4096 .
  464. <DIR> 4096 ..
  465. <DIR> 16384 lost+found
  466. <DIR> 4096 srv
  467. <DIR> 4096 home
  468. <DIR> 4096 dev
  469. <DIR> 4096 etc
  470. <DIR> 4096 run
  471. <DIR> 4096 sys
  472. <DIR> 4096 var
  473. <DIR> 4096 usr
  474. <DIR> 4096 tmp
  475. <SYM> 7 sbin
  476. <DIR> 4096 proc
  477. <DIR> 4096 root
  478. <DIR> 4096 mnt
  479. <SYM> 7 bin
  480. <DIR> 4096 opt
  481. <SYM> 7 lib
  482. <DIR> 4096 boot
  483. => ls ${devtype} ${devnum}:${bootpart} /boot
  484. <DIR> 4096 .
  485. <DIR> 4096 ..
  486. 5641462 initramfs-linux.img
  487. 6311112 zImage
  488. 847 boot.scr
  489. <SYM> 22 uInitrd
  490. 239 mkscr
  491. 153 armbianEnv.txt
  492. 3741218 uInitrd-4.14.67-rockchip
  493. 8693760 vmlinuz-4.14.67-rockchip
  494. 1460 boot.txt
  495. <DIR> 4096 dtb
  496. 153 boot.env
  497. 5016719 initramfs-linux.img.gz
  498. => setenv rootdev "LABEL=TB-MM-root"
  499. => setenv fdt_file "rk3288-miniarm.dtb"
  500. => setenv console "ttyS2,115200n8 console=tty1"
  501. => setenv bootargs "consoleblank=0 scandelay root=${rootdev} rw console=${console} rootfstype=${rootfstype} loglevel=${verbosity} rootwait usb-storage.quirks=${usbstoragequirks} ${ex setenv bootargs "consoleblank=0 scandelay root=${rootdev} rw console=${console} rootwait usb-storage.quirks='0x2537:0x1066:u,0x2537:0x1068:u'"
  502. => load ${devtype} ${devnum}:${bootpart} ${kernel_addr_r} /boot/zImage
  503. 6311112 bytes read in 149 ms (40.4 MiB/s)
  504. => load ${devtype} ${devnum}:${bootpart} ${fdt_addr_r} /boot/dtb/${fdtfile}
  505. 50914 bytes read in 4 ms (12.1 MiB/s)
  506. => fdt addr ${fdt_addr_r}
  507. => fst resize
  508. fstype - Look up a filesystem type
  510. Usage:
  511. fstype <interface> <dev>:<part>
  512. - print filesystem type
  513. fstype <interface> <dev>:<part> <varname>
  514. - set environment variable to filesystem type
  516. => fdt resize
  517. => fdt set /dwmmc@ff0c0000 broken-cd
  518. => fdt set /usb@ff500000 no-relinquish-port
  519. => load ${devtype} ${devnum}:${bootpart} ${ramdisk_addr_r} /boot/initramfs-linux.img
  520. 5641462 bytes read in 134 ms (40.1 MiB/s)
  521. => bootz ${kernel_addr_r} ${ramdisk_addr_r}:${filesize} ${fdt_addr_r}
  522. ## Flattened Device Tree blob at 01f00000
  523. Booting using the fdt blob at 0x1f00000
  524. Loading Ramdisk to 0fa9e000, end 0ffff4f6 ... OK
  525. reserving fdt memory region: addr=1f00000 size=d000
  526. Loading Device Tree to 0fa8e000, end 0fa9dfff ... OK
  528. Starting kernel ...
  530. [ 0.000000] Booting Linux on physical CPU 0x500
  531. [ 0.000000] Linux version 4.18.13-1-ARCH (builduser@leming) (gcc version 8.2.0 (GCC)) #1 SMP PREEMPT Thu Oct 11 02:22:56 UTC 2018
  532. [ 0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d
  533. [ 0.000000] CPU: div instructions available: patching division code
  534. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  535. [ 0.000000] OF: fdt: Machine model: Rockchip RK3288 Tinker Board
  536. [ 0.000000] Memory policy: Data cache writealloc
  537. [ 0.000000] cma: Reserved 48 MiB at 0x7d000000
  538. [ 0.000000] random: get_random_bytes called from start_kernel+0x8c/0x480 with crng_init=0
  539. [ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s38092 r8192 d23348 u69632
  540. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560
  541. [ 0.000000] Kernel command line: consoleblank=0 scandelay root=LABEL=TB-MM-root rw console=ttyS2,115200n8 console=tty1 rootwait usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u
  542. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  543. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  544. [ 0.000000] Memory: 2001352K/2097152K available (12288K kernel code, 1041K rwdata, 4900K rodata, 1024K init, 882K bss, 46648K reserved, 49152K cma-reserved, 1261568K highmem)
  545. [ 0.000000] Virtual kernel memory layout:
  546. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  547. [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  548. [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
  549. [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
  550. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  551. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  552. [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (13280 kB)
  553. [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB)
  554. [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) (1042 kB)
  555. [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 883 kB)
  556. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  557. [ 0.000000] Preemptible hierarchical RCU implementation.
  558. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  559. [ 0.000000] Tasks RCU enabled.
  560. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  561. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  562. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  563. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  564. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  565. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  566. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  567. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  568. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  569. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  570. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  571. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  572. [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  573. [ 0.000024] Switching to timer-based delay loop, resolution 41ns
  574. [ 0.004650] Console: colour dummy device 80x30
  575. [ 0.005331] console [tty1] enabled
  576. [ 0.005380] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
  577. [ 0.005423] pid_max: default: 32768 minimum: 301
  578. [ 0.005671] Security Framework initialized
  579. [ 0.005891] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  580. [ 0.005926] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  581. [ 0.006883] CPU: Testing write buffer coherency: ok
  582. [ 0.006937] CPU0: Spectre v2: using BPIALL workaround
  583. [ 0.007268] CPU0: thread -1, cpu 0, socket 5, mpidr 80000500
  584. [ 0.060002] Setting up static identity map for 0x300000 - 0x3000a0
  585. [ 0.080009] Hierarchical SRCU implementation.
  586. [ 0.140151] smp: Bringing up secondary CPUs ...
  587. [ 0.241637] CPU1: thread -1, cpu 1, socket 5, mpidr 80000501
  588. [ 0.241645] CPU1: Spectre v2: using BPIALL workaround
  589. [ 0.341839] CPU2: thread -1, cpu 2, socket 5, mpidr 80000502
  590. [ 0.341847] CPU2: Spectre v2: using BPIALL workaround
  591. [ 0.442059] CPU3: thread -1, cpu 3, socket 5, mpidr 80000503
  592. [ 0.442067] CPU3: Spectre v2: using BPIALL workaround
  593. [ 0.442267] smp: Brought up 1 node, 4 CPUs
  594. [ 0.442298] SMP: Total of 4 processors activated (192.00 BogoMIPS).
  595. [ 0.442322] CPU: All CPU(s) started in SVC mode.
  596. [ 0.443799] devtmpfs: initialized
  597. [ 0.454937] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0
  598. [ 0.455409] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  599. [ 0.455458] futex hash table entries: 1024 (order: 4, 65536 bytes)
  600. [ 0.457320] xor: measuring software checksum speed
  601. [ 0.550951] arm4regs : 1049.200 MB/sec
  602. [ 0.651056] 8regs : 808.800 MB/sec
  603. [ 0.751162] 32regs : 786.400 MB/sec
  604. [ 0.851266] neon : 1395.600 MB/sec
  605. [ 0.851288] xor: using function: neon (1395.600 MB/sec)
  606. [ 0.851358] pinctrl core: initialized pinctrl subsystem
  607. [ 0.853411] NET: Registered protocol family 16
  608. [ 0.856260] DMA: preallocated 256 KiB pool for atomic coherent allocations
  609. [ 0.857233] audit: initializing netlink subsys (disabled)
  610. [ 0.857480] audit: type=2000 audit(0.850:1): state=initialized audit_enabled=0 res=1
  611. [ 0.859196] cpuidle: using governor menu
  612. [ 0.859966] No ATAGs?
  613. [ 0.860138] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  614. [ 0.860186] hw-breakpoint: maximum watchpoint size is 4 bytes.
  615. [ 0.861538] Serial: AMBA PL011 UART driver
  616. [ 1.081981] raid6: int32x1 gen() 95 MB/s
  617. [ 1.252020] raid6: int32x1 xor() 107 MB/s
  618. [ 1.422285] raid6: int32x2 gen() 117 MB/s
  619. [ 1.592407] raid6: int32x2 xor() 133 MB/s
  620. [ 1.762649] raid6: int32x4 gen() 164 MB/s
  621. [ 1.932678] raid6: int32x4 xor() 143 MB/s
  622. [ 2.102835] raid6: int32x8 gen() 193 MB/s
  623. [ 2.272865] raid6: int32x8 xor() 141 MB/s
  624. [ 2.443033] raid6: neonx1 gen() 351 MB/s
  625. [ 2.613126] raid6: neonx1 xor() 472 MB/s
  626. [ 2.783312] raid6: neonx2 gen() 432 MB/s
  627. [ 2.953393] raid6: neonx2 xor() 631 MB/s
  628. [ 3.123533] raid6: neonx4 gen() 686 MB/s
  629. [ 3.293660] raid6: neonx4 xor() 712 MB/s
  630. [ 3.463794] raid6: neonx8 gen() 650 MB/s
  631. [ 3.633944] raid6: neonx8 xor() 635 MB/s
  632. [ 3.633967] raid6: using algorithm neonx4 gen() 686 MB/s
  633. [ 3.633989] raid6: .... xor() 712 MB/s, rmw enabled
  634. [ 3.634010] raid6: using neon recovery algorithm
  635. [ 3.644444] vgaarb: loaded
  636. [ 3.645377] SCSI subsystem initialized
  637. [ 3.645871] usbcore: registered new interface driver usbfs
  638. [ 3.645949] usbcore: registered new interface driver hub
  639. [ 3.646054] usbcore: registered new device driver usb
  640. [ 3.647918] media: Linux media interface: v0.10
  641. [ 3.647977] videodev: Linux video capture interface: v2.00
  642. [ 3.648059] pps_core: LinuxPPS API ver. 1 registered
  643. [ 3.648083] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  644. [ 3.648130] PTP clock support registered
  645. [ 3.648178] EDAC MC: Ver: 3.0.0
  646. [ 3.649291] Advanced Linux Sound Architecture Driver Initialized.
  647. [ 3.649845] NetLabel: Initializing
  648. [ 3.649871] NetLabel: domain hash size = 128
  649. [ 3.649890] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
  650. [ 3.649987] NetLabel: unlabeled traffic allowed by default
  651. [ 3.650467] clocksource: Switched to clocksource arch_sys_counter
  652. [ 3.650693] VFS: Disk quotas dquot_6.6.0
  653. [ 3.650790] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  654. [ 3.663134] NET: Registered protocol family 2
  655. [ 3.663970] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
  656. [ 3.664040] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  657. [ 3.664140] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  658. [ 3.664346] TCP: Hash tables configured (established 8192 bind 8192)
  659. [ 3.664483] UDP hash table entries: 512 (order: 2, 16384 bytes)
  660. [ 3.664551] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  661. [ 3.664835] NET: Registered protocol family 1
  662. [ 3.675527] RPC: Registered named UNIX socket transport module.
  663. [ 3.675558] RPC: Registered udp transport module.
  664. [ 3.675580] RPC: Registered tcp transport module.
  665. [ 3.675601] RPC: Registered tcp NFSv4.1 backchannel transport module.
  666. [ 3.676109] Unpacking initramfs...
  667. [ 4.160696] Freeing initrd memory: 5512K
  668. [ 4.161639] hw perfevents: enabled with armv7_cortex_a12 PMU driver, 7 counters available
  669. [ 4.164127] Initialise system trusted keyrings
  670. [ 4.164349] workingset: timestamp_bits=14 max_order=19 bucket_order=5
  671. [ 4.169341] zbud: loaded
  672. [ 4.171694] NFS: Registering the id_resolver key type
  673. [ 4.171753] Key type id_resolver registered
  674. [ 4.171776] Key type id_legacy registered
  675. [ 4.171810] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  676. [ 4.180573] Key type asymmetric registered
  677. [ 4.180607] Asymmetric key parser 'x509' registered
  678. [ 4.180689] bounce: pool size: 64 pages
  679. [ 4.180775] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
  680. [ 4.180985] io scheduler noop registered
  681. [ 4.181013] io scheduler deadline registered
  682. [ 4.181191] io scheduler cfq registered (default)
  683. [ 4.181219] io scheduler mq-deadline registered
  684. [ 4.181241] io scheduler kyber registered
  685. [ 4.181487] io scheduler bfq registered
  686. [ 4.207354] dma-pl330 ff250000.dma-controller: Loaded driver for PL330 DMAC-241330
  687. [ 4.207400] dma-pl330 ff250000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
  688. [ 4.208199] dma-pl330 ffb20000.dma-controller: Loaded driver for PL330 DMAC-241330
  689. [ 4.208241] dma-pl330 ffb20000.dma-controller: DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10
  690. [ 4.215264] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled
  691. [ 4.218670] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 33, base_baud = 1500000) is a 16550A
  692. [ 4.219714] ff190000.serial: ttyS1 at MMIO 0xff190000 (irq = 34, base_baud = 1500000) is a 16550A
  693. [ 4.220816] ff690000.serial: ttyS2 at MMIO 0xff690000 (irq = 35, base_baud = 1500000) is a 16550A
  694. [ 5.251102] console [ttyS2] enabled
  695. [ 5.256045] ff1b0000.serial: ttyS3 at MMIO 0xff1b0000 (irq = 36, base_baud = 1500000) is a 16550A
  696. [ 5.267044] ff1c0000.serial: ttyS4 at MMIO 0xff1c0000 (irq = 37, base_baud = 1500000) is a 16550A
  697. [ 5.278591] Serial: AMBA driver
  698. [ 5.296688] loop: module loaded
  699. [ 5.301620] Loading iSCSI transport class v2.0-870.
  700. [ 5.307493] iscsi: registered transport (tcp)
  701. [ 5.319509] libphy: Fixed MDIO Bus: probed
  702. [ 5.328222] dwc2 ff540000.usb: ff540000.usb supply vusb_d not found, using dummy regulator
  703. [ 5.337623] dwc2 ff540000.usb: ff540000.usb supply vusb_a not found, using dummy regulator
  704. [ 5.410894] dwc2 ff540000.usb: DWC OTG Controller
  705. [ 5.416198] dwc2 ff540000.usb: new USB bus registered, assigned bus number 1
  706. [ 5.424166] dwc2 ff540000.usb: irq 42, io mem 0xff540000
  707. [ 5.430423] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
  708. [ 5.439726] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  709. [ 5.447851] usb usb1: Product: DWC OTG Controller
  710. [ 5.453145] usb usb1: Manufacturer: Linux 4.18.13-1-ARCH dwc2_hsotg
  711. [ 5.460169] usb usb1: SerialNumber: ff540000.usb
  712. [ 5.465978] hub 1-0:1.0: USB hub found
  713. [ 5.470234] hub 1-0:1.0: 1 port detected
  714. [ 5.475410] dwc2 ff580000.usb: ff580000.usb supply vusb_d not found, using dummy regulator
  715. [ 5.484795] dwc2 ff580000.usb: ff580000.usb supply vusb_a not found, using dummy regulator
  716. [ 5.630547] dwc2 ff580000.usb: EPs: 10, dedicated fifos, 972 entries in SPRAM
  717. [ 5.639042] dwc2 ff580000.usb: DWC OTG Controller
  718. [ 5.644384] dwc2 ff580000.usb: new USB bus registered, assigned bus number 2
  719. [ 5.652341] dwc2 ff580000.usb: irq 43, io mem 0xff580000
  720. [ 5.658516] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
  721. [ 5.667816] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  722. [ 5.675934] usb usb2: Product: DWC OTG Controller
  723. [ 5.681228] usb usb2: Manufacturer: Linux 4.18.13-1-ARCH dwc2_hsotg
  724. [ 5.688253] usb usb2: SerialNumber: ff580000.usb
  725. [ 5.694155] hub 2-0:1.0: USB hub found
  726. [ 5.698414] hub 2-0:1.0: 1 port detected
  727. [ 5.704241] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  728. [ 5.711592] ehci-pci: EHCI PCI platform driver
  729. [ 5.716615] ehci-platform: EHCI generic platform driver
  730. [ 5.722750] ehci-platform ff500000.usb: EHCI Host Controller
  731. [ 5.729131] ehci-platform ff500000.usb: new USB bus registered, assigned bus number 3
  732. [ 5.738151] ehci-platform ff500000.usb: irq 41, io mem 0xff500000
  733. [ 5.910518] usb 1-1: new high-speed USB device number 2 using dwc2
  734. [ 5.940514] ehci-platform ff500000.usb: USB 2.0 started, EHCI 1.00
  735. [ 5.947698] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
  736. [ 5.957003] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  737. [ 5.965126] usb usb3: Product: EHCI Host Controller
  738. [ 5.970615] usb usb3: Manufacturer: Linux 4.18.13-1-ARCH ehci_hcd
  739. [ 5.977444] usb usb3: SerialNumber: ff500000.usb
  740. [ 5.983203] hub 3-0:1.0: USB hub found
  741. [ 5.987459] hub 3-0:1.0: 1 port detected
  742. [ 5.992553] ehci-mxc: Freescale On-Chip EHCI Host driver
  743. [ 5.998638] ehci-omap: OMAP-EHCI Host Controller driver
  744. [ 6.004729] ehci-orion: EHCI orion driver
  745. [ 6.009439] ehci-exynos: EHCI EXYNOS driver
  746. [ 6.014466] tegra-ehci: Tegra EHCI driver
  747. [ 6.019178] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  748. [ 6.026161] ohci-pci: OHCI PCI platform driver
  749. [ 6.031231] ohci-platform: OHCI generic platform driver
  750. [ 6.037329] ohci-exynos: OHCI EXYNOS driver
  751. [ 6.042848] usbcore: registered new interface driver uas
  752. [ 6.048915] usbcore: registered new interface driver usb-storage
  753. [ 6.055743] usbcore: registered new interface driver ums-cypress
  754. [ 6.062554] usbcore: registered new interface driver ums_eneub6250
  755. [ 6.069522] usbcore: registered new interface driver ums-freecom
  756. [ 6.076327] usbcore: registered new interface driver ums-isd200
  757. [ 6.083087] usbcore: registered new interface driver ums-usbat
  758. [ 6.097863] i2c /dev entries driver
  759. [ 6.105341] rk808 0-001b: chip id: 0x0
  760. [ 6.114045] DCDC_REG1: supplied by vcc_sys
  761. [ 6.119695] DCDC_REG2: supplied by vcc_sys
  762. [ 6.125238] DCDC_REG3: supplied by vcc_sys
  763. [ 6.130121] DCDC_REG4: supplied by vcc_sys
  764. [ 6.135532] LDO_REG1: supplied by vcc_sys
  765. [ 6.141494] LDO_REG2: supplied by vcc_sys
  766. [ 6.147165] LDO_REG3: supplied by vcc_sys
  767. [ 6.152982] LDO_REG4: supplied by vcc_io
  768. [ 6.158654] LDO_REG5: supplied by vcc_io
  769. [ 6.164007] LDO_REG6: supplied by vcc_io
  770. [ 6.169701] LDO_REG7: supplied by vcc_sys
  771. [ 6.175586] LDO_REG8: supplied by vcc_sys
  772. [ 6.181292] SWITCH_REG1: supplied by vcc_io
  773. [ 6.186326] SWITCH_REG2: supplied by vcc_io
  774. [ 6.192676] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98
  775. [ 6.201897] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  776. [ 6.209907] usb 1-1: Product: USB2.0 Hub
  777. [ 6.215236] hub 1-1:1.0: USB hub found
  778. [ 6.219822] hub 1-1:1.0: 4 ports detected
  779. [ 6.224990] random: fast init done
  780. [ 6.229413] rk808-rtc rk808-rtc: registered as rtc0
  781. [ 6.242485] rockchip-thermal ff280000.tsadc: Missing rockchip,grf property
  782. [ 6.255399] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 500000 KHz
  783. [ 6.263984] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz
  784. [ 6.274603] sdhci: Secure Digital Host Controller Interface driver
  785. [ 6.281523] sdhci: Copyright(c) Pierre Ossman
  786. [ 6.286825] Synopsys Designware Multimedia Card Interface Driver
  787. [ 6.294144] dwmmc_rockchip ff0c0000.dwmmc: IDMAC supports 32-bit address mode.
  788. [ 6.302262] dwmmc_rockchip ff0c0000.dwmmc: Using internal DMA controller.
  789. [ 6.309852] dwmmc_rockchip ff0c0000.dwmmc: Version ID is 270a
  790. [ 6.316305] dwmmc_rockchip ff0c0000.dwmmc: DW MMC controller at irq 30,32 bit host data width,256 deep fifo
  791. [ 6.327306] mmc_host mmc0: card is polling.
  792. [ 6.344605] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  793. [ 6.360465] usb 3-1: new high-speed USB device number 2 using ehci-platform
  794. [ 6.367604] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
  795. [ 6.368434] usbcore: registered new interface driver vub300
  796. [ 6.381909] usbcore: registered new interface driver ushc
  797. [ 6.388274] sdhci-pltfm: SDHCI platform and OF driver helper
  798. [ 6.395695] ledtrig-cpu: registered to indicate activity on CPUs
  799. [ 6.402640] hidraw: raw HID events driver (C) Jiri Kosina
  800. [ 6.408802] usbcore: registered new interface driver usbhid
  801. [ 6.415053] usbhid: USB HID core driver
  802. [ 6.421599] NET: Registered protocol family 10
  803. [ 6.434497] Segment Routing with IPv6
  804. [ 6.438639] mip6: Mobile IPv6
  805. [ 6.441970] NET: Registered protocol family 17
  806. [ 6.447038] Key type dns_resolver registered
  807. [ 6.451923] ThumbEE CPU extension supported.
  808. [ 6.456705] Registering SWP/SWPB emulation handler
  809. [ 6.462336] registered taskstats version 1
  810. [ 6.466912] Loading compiled-in X.509 certificates
  811. [ 6.472345] zswap: loaded using pool lzo/zbud
  812. [ 6.477964] Btrfs loaded, crc32c=crc32c-generic
  813. [ 6.491760] input: gpio-keys as /devices/platform/gpio-keys/input/input0
  814. [ 6.499816] rk808-rtc rk808-rtc: setting system clock to 2013-01-18 09:02:03 UTC (1358499723)
  815. [ 6.509371] sr_init: No PMIC hook to init smartreflex
  816. [ 6.515660] vcc_sd: supplied by vcc_io
  817. [ 6.519916] vcc_sd: disabling
  818. [ 6.523271] ALSA device list:
  819. [ 6.526615] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
  820. [ 6.530461] No soundcards found.
  821. [ 6.537564] mmc0: new high speed SDHC card at address 0007
  822. [ 6.548047] Freeing unused kernel memory: 1024K
  823. [ 6.548420] mmcblk0: mmc0:0007 SD16G 14.4 GiB
  824. [ 6.569732] mmcblk0: p1 p2 p3
  825. [ 6.748059] usb 3-1: config 1 has an invalid interface number: 255 but max is 6
  826. [ 6.756292] usb 3-1: config 1 has no interface number 6
  827. [ 6.763780] usb 3-1: New USB device found, idVendor=0bda, idProduct=481a, bcdDevice= 0.00
  828. [ 6.780771] usb 3-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
  829. [ 6.788757] usb 3-1: Product: USB Audio
  830. [ 6.793071] usb 3-1: Manufacturer: Generic
  831. [ 6.797656] usb 3-1: SerialNumber: 201405280001
  832. [ 6.807657] input: Generic USB Audio Consumer Control as /devices/platform/ff500000.usb/usb3/3-1/3-1:1.255/0003:0BDA:481A.0001/input/input1
  833. [ 6.890586] input: Generic USB Audio as /devices/platform/ff500000.usb/usb3/3-1/3-1:1.255/0003:0BDA:481A.0001/input/input2
  834. [ 6.903157] hid-generic 0003:0BDA:481A.0001: input,hiddev0,hidraw0: USB HID v1.11 Device [Generic USB Audio] on usb-ff500000.usb-1/input255
  835. [ 207.280481] random: crng init done
  836. [ 295.410460] usb 1-1.4: new high-speed USB device number 3 using dwc2
  837. [ 295.557312] usb 1-1.4: New USB device found, idVendor=2001, idProduct=3c19, bcdDevice= 1.01
  838. [ 295.566663] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  839. [ 295.574852] usb 1-1.4: Product: 11n Adapter
  840. [ 295.579526] usb 1-1.4: Manufacturer: Ralink
  841. [ 295.584206] usb 1-1.4: SerialNumber: 1.0
  842. [ 354.704493] usb 1-1.4: USB disconnect, device number 3
  843. [ 465.200556] mmc0: card 0007 removed
  844. [ 465.295233] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  845. [ 465.346625] mmc_host mmc0: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0)
  846. [ 465.401337] mmc_host mmc0: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0)
  847. [ 465.462746] mmc_host mmc0: Bus speed (slot 0) = 187500Hz (slot req 100000Hz, actual 93750HZ div = 1)
  848. [ 493.554707] mmc0: new high speed SDHC card at address 0007
  849. [ 493.561539] mmcblk0: mmc0:0007 SD16G 14.4 GiB
  850. [ 493.567779] mmcblk0: p1 p2 p3
  851.  
Powered by spacepaste. Paste removal.