spacepaste

Paste details

reply | raw

  1.  
  2. [ 0.000000] Linux version 4.16.9+ (root@l29ah-x201) (gcc version 7.3.0 (Gentoo Hardened 7.3.0-r3 p1.4)) #90 SMP PREEMPT Wed Jun 6 14:41:06 MSK 2018
  3. [ 0.000000] Command line: BOOT_IMAGE=Gentoo_i915 root=801 elevator=noop iomem=relaxed drm.debug=0xe
  4. [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
  5. [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
  6. [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
  7. [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
  8. [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
  9. [ 0.000000] e820: BIOS-provided physical RAM map:
  10. [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
  11. [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
  12. [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
  13. [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff25fff] usable
  14. [ 0.000000] BIOS-e820: [mem 0x00000000bff26000-0x00000000c29fffff] reserved
  15. [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
  16. [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
  17. [ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
  18. [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023d5fffff] usable
  19. [ 0.000000] NX (Execute Disable) protection: active
  20. [ 0.000000] SMBIOS 2.7 present.
  21. [ 0.000000] DMI: LENOVO 23259S9/23259S9, BIOS CBET4000 4.8-379-g986d5c90a5 06/05/2018
  22. [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
  23. [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
  24. [ 0.000000] e820: last_pfn = 0x23d600 max_arch_pfn = 0x400000000
  25. [ 0.000000] MTRR default type: write-back
  26. [ 0.000000] MTRR fixed ranges enabled:
  27. [ 0.000000] 00000-9FFFF write-back
  28. [ 0.000000] A0000-BFFFF uncachable
  29. [ 0.000000] C0000-FFFFF write-back
  30. [ 0.000000] MTRR variable ranges enabled:
  31. [ 0.000000] 0 base 0C0000000 mask FF0000000 uncachable
  32. [ 0.000000] 1 base 0D0000000 mask FF0000000 write-combining
  33. [ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
  34. [ 0.000000] 3 disabled
  35. [ 0.000000] 4 disabled
  36. [ 0.000000] 5 disabled
  37. [ 0.000000] 6 disabled
  38. [ 0.000000] 7 disabled
  39. [ 0.000000] 8 disabled
  40. [ 0.000000] 9 disabled
  41. [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
  42. [ 0.000000] e820: last_pfn = 0xbff26 max_arch_pfn = 0x400000000
  43. [ 0.000000] Scanning 1 areas for low memory corruption
  44. [ 0.000000] Base memory trampoline at [ (ptrval)] 99000 size 24576
  45. [ 0.000000] BRK [0x18e8b6000, 0x18e8b6fff] PGTABLE
  46. [ 0.000000] BRK [0x18e8b7000, 0x18e8b7fff] PGTABLE
  47. [ 0.000000] BRK [0x18e8b8000, 0x18e8b8fff] PGTABLE
  48. [ 0.000000] BRK [0x18e8b9000, 0x18e8b9fff] PGTABLE
  49. [ 0.000000] BRK [0x18e8ba000, 0x18e8bafff] PGTABLE
  50. [ 0.000000] BRK [0x18e8bb000, 0x18e8bbfff] PGTABLE
  51. [ 0.000000] BRK [0x18e8bc000, 0x18e8bcfff] PGTABLE
  52. [ 0.000000] BRK [0x18e8bd000, 0x18e8bdfff] PGTABLE
  53. [ 0.000000] ACPI: Early table checksum verification disabled
  54. [ 0.000000] ACPI: RSDP 0x00000000000F66B0 000024 (v02 CORE )
  55. [ 0.000000] ACPI: XSDT 0x00000000BFF4A0E0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
  56. [ 0.000000] ACPI: FACP 0x00000000BFF4D7C0 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
  57. [ 0.000000] ACPI: DSDT 0x00000000BFF4A280 003534 (v02 COREv4 COREBOOT 20110725 INTL 20161222)
  58. [ 0.000000] ACPI: FACS 0x00000000BFF4A240 000040
  59. [ 0.000000] ACPI: FACS 0x00000000BFF4A240 000040
  60. [ 0.000000] ACPI: SSDT 0x00000000BFF4D8C0 001B47 (v02 CORE COREBOOT 0000002A CORE 0000002A)
  61. [ 0.000000] ACPI: MCFG 0x00000000BFF4F410 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
  62. [ 0.000000] ACPI: TCPA 0x00000000BFF4F450 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
  63. [ 0.000000] ACPI: APIC 0x00000000BFF4F490 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
  64. [ 0.000000] ACPI: DMAR 0x00000000BFF4F500 0000A8 (v01 CORE COREBOOT 00000000 CORE 00000000)
  65. [ 0.000000] ACPI: HPET 0x00000000BFF515B0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
  66. [ 0.000000] ACPI: Local APIC address 0xfee00000
  67. [ 0.000000] tsc: Fast TSC calibration using PIT
  68. [ 0.000000] Zone ranges:
  69. [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
  70. [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
  71. [ 0.000000] Normal [mem 0x0000000100000000-0x000000023d5fffff]
  72. [ 0.000000] Movable zone start for each node
  73. [ 0.000000] Early memory node ranges
  74. [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
  75. [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bff25fff]
  76. [ 0.000000] node 0: [mem 0x0000000100000000-0x000000023d5fffff]
  77. [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023d5fffff]
  78. [ 0.000000] On node 0 totalpages: 2086084
  79. [ 0.000000] DMA zone: 64 pages used for memmap
  80. [ 0.000000] DMA zone: 21 pages reserved
  81. [ 0.000000] DMA zone: 3998 pages, LIFO batch:0
  82. [ 0.000000] DMA32 zone: 12221 pages used for memmap
  83. [ 0.000000] DMA32 zone: 782118 pages, LIFO batch:31
  84. [ 0.000000] Normal zone: 20312 pages used for memmap
  85. [ 0.000000] Normal zone: 1299968 pages, LIFO batch:31
  86. [ 0.000000] Reserved but unavailable: 98 pages
  87. [ 0.000000] Reserving Intel graphics memory at [mem 0xc0a00000-0xc29fffff]
  88. [ 0.000000] ACPI: PM-Timer IO Port: 0x508
  89. [ 0.000000] ACPI: Local APIC address 0xfee00000
  90. [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
  91. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  92. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  93. [ 0.000000] ACPI: IRQ0 used by override.
  94. [ 0.000000] ACPI: IRQ9 used by override.
  95. [ 0.000000] Using ACPI (MADT) for SMP configuration information
  96. [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
  97. [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
  98. [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
  99. [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
  100. [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
  101. [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
  102. [ 0.000000] PM: Registered nosave memory: [mem 0xbff26000-0xc29fffff]
  103. [ 0.000000] PM: Registered nosave memory: [mem 0xc2a00000-0xefffffff]
  104. [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
  105. [ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfed3ffff]
  106. [ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
  107. [ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
  108. [ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
  109. [ 0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff]
  110. [ 0.000000] e820: [mem 0xc2a00000-0xefffffff] available for PCI devices
  111. [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
  112. [ 0.000000] random: get_random_bytes called from start_kernel+0x7b/0x428 with crng_init=0
  113. [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
  114. [ 0.000000] percpu: Embedded 43 pages/cpu @ (ptrval) s138456 r8192 d29480 u524288
  115. [ 0.000000] pcpu-alloc: s138456 r8192 d29480 u524288 alloc=1*2097152
  116. [ 0.000000] pcpu-alloc: [0] 0 1 2 3
  117. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2053466
  118. [ 0.000000] Kernel command line: BOOT_IMAGE=Gentoo_i915 root=801 elevator=noop iomem=relaxed drm.debug=0xe
  119. [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
  120. [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
  121. [ 0.000000] Memory: 8108828K/8344336K available (12300K kernel code, 1137K rwdata, 3020K rodata, 1144K init, 604K bss, 235508K reserved, 0K cma-reserved)
  122. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  123. [ 0.000000] Kernel/User page tables isolation: enabled
  124. [ 0.000000] Preemptible hierarchical RCU implementation.
  125. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  126. [ 0.000000] Tasks RCU enabled.
  127. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  128. [ 0.000000] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
  129. [ 0.000000] Console: colour VGA+ 80x25
  130. [ 0.000000] console [tty0] enabled
  131. [ 0.000000] ACPI: Core revision 20180105
  132. [ 0.000000] ACPI: 2 ACPI AML tables successfully acquired and loaded
  133. [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
  134. [ 0.000000] hpet clockevent registered
  135. [ 0.000000] APIC: Switch to symmetric I/O mode setup
  136. [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  137. [ 0.016666] tsc: Fast TSC calibration using PIT
  138. [ 0.019999] tsc: Detected 2594.056 MHz processor
  139. [ 0.019999] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x25644d36d38, max_idle_ns: 440795300091 ns
  140. [ 0.019999] Calibrating delay loop (skipped), value calculated using timer frequency.. 5190.28 BogoMIPS (lpj=8646853)
  141. [ 0.019999] pid_max: default: 32768 minimum: 301
  142. [ 0.023349] Security Framework initialized
  143. [ 0.023416] AppArmor: AppArmor disabled by boot time parameter
  144. [ 0.023508] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
  145. [ 0.023595] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
  146. [ 0.023820] CPU: Physical Processor ID: 0
  147. [ 0.023889] CPU: Processor Core ID: 0
  148. [ 0.023964] mce: CPU supports 7 MCE banks
  149. [ 0.024038] CPU0: Thermal monitoring enabled (TM1)
  150. [ 0.024115] process: using mwait in idle threads
  151. [ 0.024186] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
  152. [ 0.024257] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
  153. [ 0.024329] Spectre V2 : Mitigation: Full generic retpoline
  154. [ 0.024399] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
  155. [ 0.024495] Spectre V2 : Enabling Restricted Speculation for firmware calls
  156. [ 0.024644] Freeing SMP alternatives memory: 28K
  157. [ 0.024907] TSC deadline timer enabled
  158. [ 0.024909] smpboot: CPU0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz (family: 0x6, model: 0x3a, stepping: 0x9)
  159. [ 0.036680] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
  160. [ 0.036869] ... version: 3
  161. [ 0.036959] ... bit width: 48
  162. [ 0.037047] ... generic registers: 4
  163. [ 0.037136] ... value mask: 0000ffffffffffff
  164. [ 0.037226] ... max period: 00007fffffffffff
  165. [ 0.037315] ... fixed-purpose events: 3
  166. [ 0.037401] ... event mask: 000000070000000f
  167. [ 0.043339] Hierarchical SRCU implementation.
  168. [ 0.056672] smp: Bringing up secondary CPUs ...
  169. [ 0.080021] x86: Booting SMP configuration:
  170. [ 0.080126] .... node #0, CPUs: #1 #2 #3
  171. [ 0.129234] smp: Brought up 1 node, 4 CPUs
  172. [ 0.129234] smpboot: Max logical packages: 1
  173. [ 0.129234] smpboot: Total of 4 processors activated (20760.13 BogoMIPS)
  174. [ 0.130188] devtmpfs: initialized
  175. [ 0.130224] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
  176. [ 0.130224] kworker/u8:0 (31) used greatest stack depth: 14176 bytes left
  177. [ 0.130224] futex hash table entries: 1024 (order: 4, 65536 bytes)
  178. [ 0.130368] pinctrl core: initialized pinctrl subsystem
  179. [ 0.130538] NET: Registered protocol family 16
  180. [ 0.130702] audit: initializing netlink subsys (disabled)
  181. [ 0.130796] audit: type=2000 audit(1528295504.129:1): state=initialized audit_enabled=0 res=1
  182. [ 0.133361] cpuidle: using governor ladder
  183. [ 0.136688] cpuidle: using governor menu
  184. [ 0.136812] ACPI: bus type PCI registered
  185. [ 0.136818] PCI: Using configuration type 1 for base access
  186. [ 0.136946] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
  187. [ 0.137600] kworker/u8:2 (173) used greatest stack depth: 14168 bytes left
  188. [ 0.140582] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  189. [ 0.140582] cryptd: max_cpu_qlen set to 1000
  190. [ 0.140582] ACPI: Added _OSI(Module Device)
  191. [ 0.140582] ACPI: Added _OSI(Processor Device)
  192. [ 0.140582] ACPI: Added _OSI(3.0 _SCP Extensions)
  193. [ 0.140582] ACPI: Added _OSI(Processor Aggregator Device)
  194. [ 0.140582] ACPI: Executed 1 blocks of module-level executable AML code
  195. [ 0.144908] ACPI: EC: EC started
  196. [ 0.144997] ACPI: EC: interrupt blocked
  197. [ 0.145147] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
  198. [ 0.145239] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
  199. [ 0.145378] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
  200. [ 0.145517] ACPI: Interpreter enabled
  201. [ 0.145622] ACPI: (supports S0 S3 S4 S5)
  202. [ 0.145710] ACPI: Using IOAPIC for interrupt routing
  203. [ 0.145823] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
  204. [ 0.146087] ACPI: Enabled 1 GPEs in block 00 to 3F
  205. [ 0.150185] ACPI: Power Resource [FPWR] (off)
  206. [ 0.150565] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
  207. [ 0.150660] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
  208. [ 0.150771] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
  209. [ 0.150959] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c6bff])
  210. [ 0.151127] PCI host bridge to bus 0000:00
  211. [ 0.151218] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
  212. [ 0.151313] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
  213. [ 0.151408] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
  214. [ 0.151544] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
  215. [ 0.151683] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
  216. [ 0.151821] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
  217. [ 0.151960] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
  218. [ 0.152100] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
  219. [ 0.152239] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
  220. [ 0.152376] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
  221. [ 0.152516] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
  222. [ 0.152654] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
  223. [ 0.152791] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
  224. [ 0.152931] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
  225. [ 0.153389] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
  226. [ 0.153530] pci_bus 0000:00: root bus resource [mem 0xc2a00001-0xefffffff window]
  227. [ 0.153669] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
  228. [ 0.153808] pci_bus 0000:00: root bus resource [bus 00-ff]
  229. [ 0.153907] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
  230. [ 0.153994] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
  231. [ 0.154006] pci 0000:00:02.0: reg 0x10: [mem 0xe1000000-0xe13fffff 64bit]
  232. [ 0.154012] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
  233. [ 0.154016] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
  234. [ 0.154088] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
  235. [ 0.154098] pci 0000:00:04.0: reg 0x10: [mem 0xe1630000-0xe1637fff 64bit]
  236. [ 0.154187] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
  237. [ 0.154212] pci 0000:00:14.0: reg 0x10: [mem 0xe1620000-0xe162ffff 64bit]
  238. [ 0.154280] pci 0000:00:14.0: PME# supported from D3hot D3cold
  239. [ 0.154373] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
  240. [ 0.154466] pci 0000:00:16.0: reg 0x10: [mem 0xe1642000-0xe164200f 64bit]
  241. [ 0.154788] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
  242. [ 0.154875] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
  243. [ 0.154893] pci 0000:00:19.0: reg 0x10: [mem 0xe1600000-0xe161ffff]
  244. [ 0.154902] pci 0000:00:19.0: reg 0x14: [mem 0xe163c000-0xe163cfff]
  245. [ 0.154910] pci 0000:00:19.0: reg 0x18: [io 0x3040-0x305f]
  246. [ 0.154969] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
  247. [ 0.155029] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
  248. [ 0.155051] pci 0000:00:1a.0: reg 0x10: [mem 0xe163f000-0xe163f3ff]
  249. [ 0.155134] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
  250. [ 0.155199] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
  251. [ 0.155217] pci 0000:00:1b.0: reg 0x10: [mem 0xe1638000-0xe163bfff 64bit]
  252. [ 0.155285] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
  253. [ 0.155353] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
  254. [ 0.155478] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
  255. [ 0.155552] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
  256. [ 0.155678] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
  257. [ 0.155752] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
  258. [ 0.155880] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
  259. [ 0.155954] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
  260. [ 0.155976] pci 0000:00:1d.0: reg 0x10: [mem 0xe1640000-0xe16403ff]
  261. [ 0.156059] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
  262. [ 0.156123] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
  263. [ 0.156286] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
  264. [ 0.156306] pci 0000:00:1f.2: reg 0x10: [io 0x3080-0x3087]
  265. [ 0.156314] pci 0000:00:1f.2: reg 0x14: [io 0x3090-0x3093]
  266. [ 0.156323] pci 0000:00:1f.2: reg 0x18: [io 0x3088-0x308f]
  267. [ 0.156331] pci 0000:00:1f.2: reg 0x1c: [io 0x3094-0x3097]
  268. [ 0.156339] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
  269. [ 0.156347] pci 0000:00:1f.2: reg 0x24: [mem 0xe163e000-0xe163e7ff]
  270. [ 0.156391] pci 0000:00:1f.2: PME# supported from D3hot
  271. [ 0.156448] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
  272. [ 0.156468] pci 0000:00:1f.3: reg 0x10: [mem 0xe1641000-0xe16410ff 64bit]
  273. [ 0.156488] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
  274. [ 0.156564] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
  275. [ 0.156589] pci 0000:00:1f.6: reg 0x10: [mem 0xe163d000-0xe163dfff 64bit]
  276. [ 0.156794] pci 0000:01:00.0: [1180:e823] type 00 class 0x080501
  277. [ 0.156821] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.
  278. [ 0.156969] pci 0000:01:00.0: reg 0x10: [mem 0xe1400000-0xe14000ff]
  279. [ 0.157244] pci 0000:01:00.0: supports D1 D2
  280. [ 0.157245] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  281. [ 0.166720] pci 0000:00:1c.0: PCI bridge to [bus 01]
  282. [ 0.166819] pci 0000:00:1c.0: bridge window [mem 0xe1400000-0xe14fffff]
  283. [ 0.166991] pci 0000:02:00.0: [8086:0085] type 00 class 0x028000
  284. [ 0.167107] pci 0000:02:00.0: reg 0x10: [mem 0xe1500000-0xe1501fff 64bit]
  285. [ 0.167567] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
  286. [ 0.176791] pci 0000:00:1c.1: PCI bridge to [bus 02]
  287. [ 0.176889] pci 0000:00:1c.1: bridge window [mem 0xe1500000-0xe15fffff]
  288. [ 0.176954] pci 0000:00:1c.2: PCI bridge to [bus 03]
  289. [ 0.177049] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
  290. [ 0.177054] pci 0000:00:1c.2: bridge window [mem 0xe0800000-0xe0ffffff]
  291. [ 0.177063] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe07fffff 64bit pref]
  292. [ 0.177091] pci_bus 0000:00: on NUMA node 0
  293. [ 0.177218] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
  294. [ 0.177356] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
  295. [ 0.177489] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
  296. [ 0.177619] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
  297. [ 0.177749] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
  298. [ 0.177882] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
  299. [ 0.178012] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
  300. [ 0.178145] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
  301. [ 0.178762] ACPI: EC: interrupt unblocked
  302. [ 0.178762] ACPI: EC: event unblocked
  303. [ 0.178762] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
  304. [ 0.178762] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
  305. [ 0.178766] pci 0000:00:02.0: vgaarb: setting as boot VGA device
  306. [ 0.178766] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
  307. [ 0.178766] pci 0000:00:02.0: vgaarb: bridge control possible
  308. [ 0.178766] vgaarb: loaded
  309. [ 0.178766] SCSI subsystem initialized
  310. [ 0.178766] libata version 3.00 loaded.
  311. [ 0.178766] ACPI: bus type USB registered
  312. [ 0.180035] usbcore: registered new interface driver usbfs
  313. [ 0.180137] usbcore: registered new interface driver hub
  314. [ 0.180246] usbcore: registered new device driver usb
  315. [ 0.180357] Linux video capture interface: v2.00
  316. [ 0.180461] pps_core: LinuxPPS API ver. 1 registered
  317. [ 0.180551] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  318. [ 0.180694] PTP clock support registered
  319. [ 0.180792] EDAC MC: Ver: 3.0.0
  320. [ 0.181015] PCI: Using ACPI for IRQ routing
  321. [ 0.181015] PCI: pci_cache_line_size set to 64 bytes
  322. [ 0.181015] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
  323. [ 0.181015] e820: reserve RAM buffer [mem 0xbff26000-0xbfffffff]
  324. [ 0.181015] e820: reserve RAM buffer [mem 0x23d600000-0x23fffffff]
  325. [ 0.181015] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
  326. [ 0.181015] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
  327. [ 0.183353] clocksource: Switched to clocksource tsc-early
  328. [ 0.191628] VFS: Disk quotas dquot_6.6.0
  329. [ 0.191733] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  330. [ 0.191889] pnp: PnP ACPI init
  331. [ 0.192113] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
  332. [ 0.192208] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
  333. [ 0.192300] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
  334. [ 0.192393] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
  335. [ 0.192486] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
  336. [ 0.192580] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
  337. [ 0.192674] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
  338. [ 0.192767] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
  339. [ 0.192862] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
  340. [ 0.192957] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
  341. [ 0.193057] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
  342. [ 0.193484] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
  343. [ 0.193584] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
  344. [ 0.193619] system 00:02: [io 0x0500-0x057f] has been reserved
  345. [ 0.193711] system 00:02: [io 0x0480-0x04bf] has been reserved
  346. [ 0.193809] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
  347. [ 0.193826] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
  348. [ 0.193853] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
  349. [ 0.193876] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
  350. [ 0.193899] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
  351. [ 0.193917] pnp: PnP ACPI: found 7 devices
  352. [ 0.200192] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
  353. [ 0.200373] pci 0000:00:1c.0: PCI bridge to [bus 01]
  354. [ 0.200471] pci 0000:00:1c.0: bridge window [mem 0xe1400000-0xe14fffff]
  355. [ 0.200574] pci 0000:00:1c.1: PCI bridge to [bus 02]
  356. [ 0.200670] pci 0000:00:1c.1: bridge window [mem 0xe1500000-0xe15fffff]
  357. [ 0.200775] pci 0000:00:1c.2: PCI bridge to [bus 03]
  358. [ 0.200868] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
  359. [ 0.200965] pci 0000:00:1c.2: bridge window [mem 0xe0800000-0xe0ffffff]
  360. [ 0.201064] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe07fffff 64bit pref]
  361. [ 0.201208] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
  362. [ 0.201210] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
  363. [ 0.201212] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
  364. [ 0.201213] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
  365. [ 0.201214] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window]
  366. [ 0.201216] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window]
  367. [ 0.201217] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
  368. [ 0.201219] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
  369. [ 0.201220] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
  370. [ 0.201222] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
  371. [ 0.201223] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
  372. [ 0.201224] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
  373. [ 0.201226] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
  374. [ 0.201227] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
  375. [ 0.201228] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
  376. [ 0.201230] pci_bus 0000:00: resource 19 [mem 0xc2a00001-0xefffffff window]
  377. [ 0.201231] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window]
  378. [ 0.201233] pci_bus 0000:01: resource 1 [mem 0xe1400000-0xe14fffff]
  379. [ 0.201234] pci_bus 0000:02: resource 1 [mem 0xe1500000-0xe15fffff]
  380. [ 0.201236] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
  381. [ 0.201237] pci_bus 0000:03: resource 1 [mem 0xe0800000-0xe0ffffff]
  382. [ 0.201238] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xe07fffff 64bit pref]
  383. [ 0.201306] NET: Registered protocol family 2
  384. [ 0.201495] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
  385. [ 0.201644] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
  386. [ 0.201862] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  387. [ 0.202071] TCP: Hash tables configured (established 65536 bind 65536)
  388. [ 0.202187] UDP hash table entries: 4096 (order: 5, 131072 bytes)
  389. [ 0.202294] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
  390. [ 0.202434] NET: Registered protocol family 1
  391. [ 0.202602] RPC: Registered named UNIX socket transport module.
  392. [ 0.202695] RPC: Registered udp transport module.
  393. [ 0.202783] RPC: Registered tcp transport module.
  394. [ 0.202873] RPC: Registered tcp NFSv4.1 backchannel transport module.
  395. [ 0.203053] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
  396. [ 0.203791] PCI: CLS 64 bytes, default 64
  397. [ 0.203855] DMAR: Host address width 36
  398. [ 0.203947] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
  399. [ 0.204047] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
  400. [ 0.204187] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
  401. [ 0.204284] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
  402. [ 0.204433] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
  403. [ 0.204529] software IO TLB [mem 0xbbf26000-0xbff26000] (64MB) mapped at [ (ptrval)- (ptrval)]
  404. [ 0.204738] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
  405. [ 0.204880] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
  406. [ 0.204974] RAPL PMU: hw unit of domain package 2^-16 Joules
  407. [ 0.205068] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
  408. [ 0.205595] Scanning for low memory corruption every 60 seconds
  409. [ 0.206316] workingset: timestamp_bits=62 max_order=21 bucket_order=0
  410. [ 0.208302] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  411. [ 0.208566] NFS: Registering the id_resolver key type
  412. [ 0.208665] Key type id_resolver registered
  413. [ 0.208757] Key type id_legacy registered
  414. [ 0.208883] fuse init (API version 7.26)
  415. [ 0.209759] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  416. [ 0.209903] io scheduler noop registered (default)
  417. [ 0.209995] io scheduler deadline registered
  418. [ 0.210145] io scheduler cfq registered
  419. [ 0.210237] io scheduler mq-deadline registered
  420. [ 0.210330] io scheduler kyber registered
  421. [ 0.210932] intel_idle: MWAIT substates: 0x21120
  422. [ 0.210933] intel_idle: v0.4.1 model 0x3A
  423. [ 0.211046] intel_idle: lapic_timer_reliable_states 0xffffffff
  424. [ 0.211216] ACPI: AC Adapter [AC] (on-line)
  425. [ 0.211373] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:28/PNP0C09:00/PNP0C0E:00/input/input0
  426. [ 0.211533] ACPI: Sleep Button [SLPB]
  427. [ 0.211664] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:28/PNP0C09:00/PNP0C0D:00/input/input1
  428. [ 0.211820] ACPI: Lid Switch [LID]
  429. [ 0.211950] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
  430. [ 0.212101] ACPI: Power Button [PWRF]
  431. [ 0.214094] thermal LNXTHERM:00: registered as thermal_zone0
  432. [ 0.214190] ACPI: Thermal Zone [THM0] (58 C)
  433. [ 0.214876] thermal LNXTHERM:01: registered as thermal_zone1
  434. [ 0.214972] ACPI: Thermal Zone [THM1] (27 C)
  435. [ 0.215254] ACPI: Battery Slot [BAT0] (battery absent)
  436. [ 0.216860] ACPI: Battery Slot [BAT1] (battery absent)
  437. [ 0.225881] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  438. [ 0.226491] Non-volatile memory driver v1.3
  439. [ 0.226642] Linux agpgart interface v0.103
  440. [ 0.226917] [drm:i915_driver_load] Found PantherPoint PCH
  441. [ 0.226921] [drm:intel_power_domains_init] Allowed DC state mask 00
  442. [ 0.227111] [drm:i915_driver_load] ppgtt mode: 1
  443. [ 0.227114] [drm:intel_uc_sanitize_options] enable_guc=0 (submission:no huc:no)
  444. [ 0.227125] [drm:i915_ggtt_probe_hw] GGTT size = 2048M
  445. [ 0.227126] [drm:i915_ggtt_probe_hw] GMADR size = 256M
  446. [ 0.227127] [drm:i915_ggtt_probe_hw] DSM size = 32M
  447. [ 0.227129] [drm] Replacing VGA console driver
  448. [ 0.228113] Console: switching to colour dummy device 80x25
  449. [ 0.228159] [drm:i915_gem_init_stolen] Memory reserved for graphics device: 32768K, usable: 32768K
  450. [ 0.228168] [drm:intel_opregion_setup] graphic opregion physical addr: 0xbff4f5b0
  451. [ 0.228188] [drm:intel_opregion_setup] Public ACPI methods supported
  452. [ 0.228190] [drm:intel_opregion_setup] SWSCI supported
  453. [ 0.283422] [drm:swsci] SWSCI request timed out
  454. [ 0.283425] [drm:swsci] SWSCI request already in progress
  455. [ 0.283429] [drm:intel_opregion_setup] SWSCI GBDA callbacks 00000001, SBCB callbacks 00000001
  456. [ 0.283430] [drm:intel_opregion_setup] ASLE supported
  457. [ 0.283432] [drm:intel_opregion_setup] ASLE extension supported
  458. [ 0.283435] [drm:intel_opregion_setup] Found valid VBT in ACPI OpRegion (Mailbox #4)
  459. [ 0.283488] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  460. [ 0.283495] [drm] Driver supports precise vblank timestamp query.
  461. [ 0.283502] [drm:intel_bios_init] Set default to SSC at 120000 kHz
  462. [ 0.283505] [drm:intel_bios_init] VBT signature "$VBT SNB/IVB-MOBILE ", BDB version 165
  463. [ 0.283508] [drm:intel_bios_init] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
  464. [ 0.283510] [drm:intel_bios_init] crt_ddc_bus_pin: 2
  465. [ 0.283515] [drm:intel_opregion_get_panel_type] Failed to get panel details from OpRegion (-22)
  466. [ 0.283517] [drm:intel_bios_init] Panel type: 2 (VBT)
  467. [ 0.283519] [drm:intel_bios_init] DRRS supported mode is static
  468. [ 0.283522] [drm:intel_bios_init] Found panel mode in BIOS VBT tables:
  469. [ 0.283528] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
  470. [ 0.283530] [drm:intel_bios_init] VBT initial LVDS value 300
  471. [ 0.283534] [drm:intel_bios_init] VBT backlight PWM modulation frequency 220 Hz, active high, min brightness 3, level 255, controller 0
  472. [ 0.283536] [drm:intel_bios_init] Found SDVO panel mode in BIOS VBT tables:
  473. [ 0.283540] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
  474. [ 0.283542] [drm:intel_bios_init] DRRS State Enabled:1
  475. [ 0.283545] [drm:intel_bios_init] No SDVO device info is found in VBT
  476. [ 0.283558] [drm:intel_dsm_detect] no _DSM method for intel device
  477. [ 0.283565] [drm:i915_driver_load] rawclk rate: 125000 kHz
  478. [ 0.283570] [drm:intel_power_well_enable] enabling always-on
  479. [ 0.283955] [drm:intel_fbc_init] Sanitized enable_fbc value: 0
  480. [ 0.283960] [drm:intel_print_wm_latency] Primary WM0 latency 12 (1.2 usec)
  481. [ 0.283962] [drm:intel_print_wm_latency] Primary WM1 latency 4 (2.0 usec)
  482. [ 0.283963] [drm:intel_print_wm_latency] Primary WM2 latency 16 (8.0 usec)
  483. [ 0.283965] [drm:intel_print_wm_latency] Primary WM3 latency 32 (16.0 usec)
  484. [ 0.283966] [drm:intel_print_wm_latency] Sprite WM0 latency 12 (1.2 usec)
  485. [ 0.283968] [drm:intel_print_wm_latency] Sprite WM1 latency 4 (2.0 usec)
  486. [ 0.283969] [drm:intel_print_wm_latency] Sprite WM2 latency 16 (8.0 usec)
  487. [ 0.283971] [drm:intel_print_wm_latency] Sprite WM3 latency 32 (16.0 usec)
  488. [ 0.283972] [drm:intel_print_wm_latency] Cursor WM0 latency 12 (1.2 usec)
  489. [ 0.283974] [drm:intel_print_wm_latency] Cursor WM1 latency 4 (2.0 usec)
  490. [ 0.283975] [drm:intel_print_wm_latency] Cursor WM2 latency 16 (8.0 usec)
  491. [ 0.283976] [drm:intel_print_wm_latency] Cursor WM3 latency 64 (32.0 usec)
  492. [ 0.283982] [drm:intel_modeset_init] SSC enabled by BIOS, overriding VBT which says disabled
  493. [ 0.283984] [drm:intel_modeset_init] 3 display pipes available.
  494. [ 0.284012] [drm:intel_modeset_init] FDI PLL freq=270000
  495. [ 0.284016] [drm:intel_dump_cdclk_state] Current CDCLK 400000 kHz, VCO 0 kHz, ref 0 kHz, voltage level 0
  496. [ 0.284019] [drm:intel_update_max_cdclk] Max CD clock rate: 400000 kHz
  497. [ 0.284021] [drm:intel_modeset_init] Max dotclock rate: 360000 kHz
  498. [ 0.284025] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
  499. [ 0.284351] [drm:intel_lvds_init] LVDS PPS:t1+t2 100 t3 100 t4 5000 t5 2100 tx 2100 divider 6249 port 0 powerdown_on_reset 1
  500. [ 0.300094] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] timed out after NAK
  501. [ 0.300101] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
  502. [ 0.363427] [drm] EDID has major version 0, instead of 1
  503. [ 0.420089] [drm] EDID has major version 0, instead of 1
  504. [ 0.476757] [drm] EDID has major version 0, instead of 1
  505. [ 0.533425] [drm] EDID has major version 0, instead of 1
  506. [ 0.533435] i915 0000:00:02.0: LVDS-1: EDID is invalid:
  507. [ 0.533438] [drm] EDID has major version 0, instead of 1
  508. [ 0.533441] [00] BAD 00 ff ff ff ff ff ff 00 69 98 01 03 e1 00 00 00
  509. [ 0.533444] [00] BAD 34 1b 00 00 95 1c 10 78 ea 4b b5 9b 5b 54 8e 25
  510. [ 0.533446] [00] BAD 1e 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
  511. [ 0.533449] [00] BAD 01 01 01 01 01 01 14 37 80 c2 70 38 1f 40 3c 2e
  512. [ 0.533452] [00] BAD 35 00 e0 0e 11 00 00 1a 00 00 00 fd 00 01 18 01
  513. [ 0.533454] [00] BAD 1c 01 00 0a 20 20 20 20 20 20 00 00 00 ff 00 44
  514. [ 0.533456] [00] BAD 32 55 30 35 30 30 45 31 00 00 00 00 00 00 00 fc
  515. [ 0.533459] [00] BAD 00 44 75 6d 6d 79 20 64 69 73 70 6c 61 79 00 72
  516. [ 0.533467] [drm:intel_lvds_init] using mode from VBT:
  517. [ 0.533473] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
  518. [ 0.533483] [drm:intel_panel_setup_backlight] Connector LVDS-1 backlight initialized, enabled, brightness 4437/4437
  519. [ 0.533488] [drm:intel_lvds_init] detected single-link lvds configuration
  520. [ 0.533504] [drm:intel_crt_reset] crt adpa set to 0xf40000
  521. [ 0.533510] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 1
  522. [ 0.560029] [drm:intel_sdvo_read_byte] i2c transfer returned -6
  523. [ 0.560031] [drm:intel_sdvo_init] No SDVO device found on SDVOB
  524. [ 0.560059] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpb. force bit now 0
  525. [ 0.560063] [drm:intel_hdmi_init_connector] Adding HDMI connector on port B
  526. [ 0.560067] [drm:intel_hdmi_init_connector] Using DDC pin 0x5 for port B (platform default)
  527. [ 0.560079] [drm:intel_dp_init_connector] Adding DP connector on port B
  528. [ 0.560081] [drm:intel_dp_init_connector] using AUX B for port B (platform default)
  529. [ 0.560085] [drm:intel_hdmi_init_connector] Adding HDMI connector on port C
  530. [ 0.560087] [drm:intel_hdmi_init_connector] Using DDC pin 0x4 for port C (platform default)
  531. [ 0.560091] [drm:intel_hdmi_init_connector] Adding HDMI connector on port D
  532. [ 0.560094] [drm:intel_hdmi_init_connector] Using DDC pin 0x6 for port D (platform default)
  533. [ 0.560098] [drm:intel_dp_init_connector] Adding DP connector on port C
  534. [ 0.560100] [drm:intel_dp_init_connector] using AUX C for port C (platform default)
  535. [ 0.560105] [drm:intel_dp_init_connector] Adding DP connector on port D
  536. [ 0.560107] [drm:intel_dp_init_connector] using AUX D for port D (platform default)
  537. [ 0.560113] [drm:intel_init_pch_refclk] has_panel 1 has_lvds 1 has_ck505 0 using_ssc_source 1
  538. [ 0.560130] [drm:intel_modeset_setup_hw_state] pipe A active planes 0x0
  539. [ 0.560133] [drm:intel_modeset_setup_hw_state] pipe A active planes 0x0
  540. [ 0.560135] [drm:intel_modeset_setup_hw_state] pipe A active planes 0x0
  541. [ 0.560137] [drm:intel_modeset_setup_hw_state] [CRTC:37:pipe A] hw state readout: enabled
  542. [ 0.560140] [drm:intel_modeset_setup_hw_state] pipe B active planes 0x0
  543. [ 0.560142] [drm:intel_modeset_setup_hw_state] pipe B active planes 0x0
  544. [ 0.560145] [drm:intel_modeset_setup_hw_state] pipe B active planes 0x0
  545. [ 0.560147] [drm:intel_modeset_setup_hw_state] [CRTC:47:pipe B] hw state readout: disabled
  546. [ 0.560149] [drm:intel_modeset_setup_hw_state] pipe C active planes 0x0
  547. [ 0.560152] [drm:intel_modeset_setup_hw_state] pipe C active planes 0x0
  548. [ 0.560154] [drm:intel_modeset_setup_hw_state] pipe C active planes 0x0
  549. [ 0.560156] [drm:intel_modeset_setup_hw_state] [CRTC:57:pipe C] hw state readout: disabled
  550. [ 0.560161] [drm:intel_modeset_setup_hw_state] PCH DPLL A hw state readout: crtc_mask 0x00000001, on 1
  551. [ 0.560167] [drm:intel_modeset_setup_hw_state] PCH DPLL B hw state readout: crtc_mask 0x00000000, on 0
  552. [ 0.560171] [drm:intel_modeset_setup_hw_state] [ENCODER:59:LVDS] hw state readout: disabled, pipe A
  553. [ 0.560175] [drm:intel_modeset_setup_hw_state] [ENCODER:63:CRT] hw state readout: disabled, pipe A
  554. [ 0.560179] [drm:intel_modeset_setup_hw_state] [ENCODER:64:HDMI B] hw state readout: disabled, pipe A
  555. [ 0.560183] [drm:intel_modeset_setup_hw_state] [ENCODER:69:DP B] hw state readout: disabled, pipe A
  556. [ 0.560186] [drm:intel_modeset_setup_hw_state] [ENCODER:71:HDMI C] hw state readout: disabled, pipe A
  557. [ 0.560190] [drm:intel_modeset_setup_hw_state] [ENCODER:73:HDMI D] hw state readout: disabled, pipe A
  558. [ 0.560194] [drm:intel_modeset_setup_hw_state] [ENCODER:75:DP C] hw state readout: disabled, pipe A
  559. [ 0.560203] [drm:intel_modeset_setup_hw_state] [ENCODER:77:DP D] hw state readout: enabled, pipe A
  560. [ 0.560207] [drm:intel_modeset_setup_hw_state] [CONNECTOR:58:LVDS-1] hw state readout: disabled
  561. [ 0.560211] [drm:intel_modeset_setup_hw_state] [CONNECTOR:62:VGA-1] hw state readout: disabled
  562. [ 0.560214] [drm:intel_modeset_setup_hw_state] [CONNECTOR:65:HDMI-A-1] hw state readout: disabled
  563. [ 0.560218] [drm:intel_modeset_setup_hw_state] [CONNECTOR:70:DP-1] hw state readout: disabled
  564. [ 0.560222] [drm:intel_modeset_setup_hw_state] [CONNECTOR:72:HDMI-A-2] hw state readout: disabled
  565. [ 0.560226] [drm:intel_modeset_setup_hw_state] [CONNECTOR:74:HDMI-A-3] hw state readout: disabled
  566. [ 0.560229] [drm:intel_modeset_setup_hw_state] [CONNECTOR:76:DP-2] hw state readout: disabled
  567. [ 0.560234] [drm:intel_modeset_setup_hw_state] [CONNECTOR:78:DP-3] hw state readout: enabled
  568. [ 0.560243] [drm:intel_dump_pipe_config] [CRTC:37:pipe A][setup_hw_state]
  569. [ 0.560245] [drm:intel_dump_pipe_config] output_types: DP (0x80)
  570. [ 0.560247] [drm:intel_dump_pipe_config] cpu_transcoder: A, pipe bpp: 18, dithering: 0
  571. [ 0.560249] [drm:intel_dump_pipe_config] fdi: lanes: 2; gmch_m: 4885315, gmch_n: 8388608, link_m: 542812, link_n: 1048576, tu: 64
  572. [ 0.560252] [drm:intel_dump_pipe_config] dp m_n: lanes: 2; gmch_m: 4885315, gmch_n: 8388608, link_m: 542812, link_n: 1048576, tu: 64
  573. [ 0.560253] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
  574. [ 0.560255] [drm:intel_dump_pipe_config] requested mode:
  575. [ 0.560259] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 139769 1920 1968 2000 2080 1080 1083 1089 1120 0x40 0x9
  576. [ 0.560260] [drm:intel_dump_pipe_config] adjusted mode:
  577. [ 0.560264] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 139769 1920 1968 2000 2080 1080 1083 1089 1120 0x40 0x9
  578. [ 0.560266] [drm:intel_dump_pipe_config] crtc timings: 139769 1920 1968 2000 2080 1080 1083 1089 1120, type: 0x40 flags: 0x9
  579. [ 0.560268] [drm:intel_dump_pipe_config] port clock: 270000, pipe src size: 640x400, pixel rate 139769
  580. [ 0.560270] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00600000, size: 0x06c00438, enabled
  581. [ 0.560272] [drm:intel_dump_pipe_config] ips: 0, double wide: 0
  582. [ 0.560275] [drm:ibx_dump_hw_state] dpll_hw_state: dpll: 0xc4016001, dpll_md: 0x0, fp0: 0x20e08, fp1: 0x20e08
  583. [ 0.560277] [drm:intel_dump_pipe_config] planes on this crtc
  584. [ 0.560279] [drm:intel_dump_pipe_config] [PLANE:28:primary A] disabled, scaler_id = 0
  585. [ 0.560280] [drm:intel_dump_pipe_config] [PLANE:31:sprite A] disabled, scaler_id = 0
  586. [ 0.560282] [drm:intel_dump_pipe_config] [PLANE:34:cursor A] disabled, scaler_id = 0
  587. [ 0.560284] [drm:intel_dump_pipe_config] [CRTC:47:pipe B][setup_hw_state]
  588. [ 0.560286] [drm:intel_dump_pipe_config] output_types: (0x0)
  589. [ 0.560288] [drm:intel_dump_pipe_config] cpu_transcoder: B, pipe bpp: 0, dithering: 0
  590. [ 0.560289] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
  591. [ 0.560291] [drm:intel_dump_pipe_config] requested mode:
  592. [ 0.560294] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
  593. [ 0.560295] [drm:intel_dump_pipe_config] adjusted mode:
  594. [ 0.560298] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
  595. [ 0.560301] [drm:intel_dump_pipe_config] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
  596. [ 0.560302] [drm:intel_dump_pipe_config] port clock: 0, pipe src size: 0x0, pixel rate 0
  597. [ 0.560304] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
  598. [ 0.560306] [drm:intel_dump_pipe_config] ips: 0, double wide: 0
  599. [ 0.560307] [drm:ibx_dump_hw_state] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0
  600. [ 0.560309] [drm:intel_dump_pipe_config] planes on this crtc
  601. [ 0.560311] [drm:intel_dump_pipe_config] [PLANE:38:primary B] disabled, scaler_id = 0
  602. [ 0.560312] [drm:intel_dump_pipe_config] [PLANE:41:sprite B] disabled, scaler_id = 0
  603. [ 0.560314] [drm:intel_dump_pipe_config] [PLANE:44:cursor B] disabled, scaler_id = 0
  604. [ 0.560316] [drm:intel_dump_pipe_config] [CRTC:57:pipe C][setup_hw_state]
  605. [ 0.560317] [drm:intel_dump_pipe_config] output_types: (0x0)
  606. [ 0.560319] [drm:intel_dump_pipe_config] cpu_transcoder: C, pipe bpp: 0, dithering: 0
  607. [ 0.560321] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
  608. [ 0.560322] [drm:intel_dump_pipe_config] requested mode:
  609. [ 0.560325] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
  610. [ 0.560326] [drm:intel_dump_pipe_config] adjusted mode:
  611. [ 0.560329] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
  612. [ 0.560332] [drm:intel_dump_pipe_config] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
  613. [ 0.560334] [drm:intel_dump_pipe_config] port clock: 0, pipe src size: 0x0, pixel rate 0
  614. [ 0.560335] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
  615. [ 0.560337] [drm:intel_dump_pipe_config] ips: 0, double wide: 0
  616. [ 0.560338] [drm:ibx_dump_hw_state] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0
  617. [ 0.560340] [drm:intel_dump_pipe_config] planes on this crtc
  618. [ 0.560342] [drm:intel_dump_pipe_config] [PLANE:48:primary C] disabled, scaler_id = 0
  619. [ 0.560343] [drm:intel_dump_pipe_config] [PLANE:51:sprite C] disabled, scaler_id = 0
  620. [ 0.560345] [drm:intel_dump_pipe_config] [PLANE:54:cursor C] disabled, scaler_id = 0
  621. [ 0.560626] [drm:i915_gem_init_ggtt] clearing unused GTT space: [1000, 80000000]
  622. [ 0.562705] [drm:i915_ppgtt_create] Allocated pde space (2M) at GTT entry: 7fe00
  623. [ 0.562707] [drm:i915_ppgtt_create] Adding PPGTT at offset 7fe00000
  624. [ 0.562712] [drm:i915_gem_contexts_init] logical context support initialized
  625. [ 0.562851] [drm:intel_engine_init_common] rcs0 hws offset: 0x7fdfd000
  626. [ 0.562860] [drm:intel_engine_create_scratch] rcs0 pipe control offset: 0x7fdfc000
  627. [ 0.562958] [drm:intel_engine_init_common] bcs0 hws offset: 0x7fdfb000
  628. [ 0.563065] [drm:intel_engine_init_common] vcs0 hws offset: 0x7fdfa000
  629. [ 0.563075] [drm:intel_init_gt_powersave] Overclocking supported, max: 1200MHz, overclock: 1200MHz
  630. [ 0.563095] [drm:init_workarounds_ring] rcs0: Number of context specific w/a: 0
  631. [ 0.563243] [drm:intel_fbdev_init] pipe A not active or no fb, skipping
  632. [ 0.563245] [drm:intel_fbdev_init] pipe B not active or no fb, skipping
  633. [ 0.563247] [drm:intel_fbdev_init] pipe C not active or no fb, skipping
  634. [ 0.563249] [drm:intel_fbdev_init] no active fbs found, not using BIOS config
  635. [ 0.563516] [drm:intel_backlight_device_register] Connector LVDS-1 backlight sysfs interface registered
  636. [ 0.563600] [drm:intel_dp_connector_register] registering DPDDC-B bus for card0-DP-1
  637. [ 0.563700] [drm:intel_dp_connector_register] registering DPDDC-C bus for card0-DP-2
  638. [ 0.563741] [drm:intel_dp_connector_register] registering DPDDC-D bus for card0-DP-3
  639. [ 0.563758] [drm] Initialized i915 1.6.0 20171222 for 0000:00:02.0 on minor 0
  640. [ 0.563834] [drm:intel_opregion_register] 8 outputs detected
  641. [ 0.563898] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
  642. [ 0.564956] acpi device:0b: registered as cooling_device5
  643. [ 0.565008] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
  644. [ 0.565062] i915 device info: pciid=0x0166 rev=0x09 platform=IVYBRIDGE gen=7
  645. [ 0.565066] [drm:drm_setup_crtcs]
  646. [ 0.565068] i915 device info: is_mobile: yes
  647. [ 0.565071] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:LVDS-1]
  648. [ 0.565072] i915 device info: is_lp: no
  649. [ 0.565075] [drm:intel_lvds_detect] [CONNECTOR:58:LVDS-1]
  650. [ 0.565075] i915 device info: is_alpha_support: no
  651. [ 0.565078] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:LVDS-1] status updated from unknown to connected
  652. [ 0.565079] i915 device info: has_64bit_reloc: no
  653. [ 0.565080] i915 device info: has_aliasing_ppgtt: yes
  654. [ 0.565080] i915 device info: has_csr: no
  655. [ 0.565081] i915 device info: has_ddi: no
  656. [ 0.565082] i915 device info: has_dp_mst: no
  657. [ 0.565083] i915 device info: has_reset_engine: no
  658. [ 0.565083] i915 device info: has_fbc: yes
  659. [ 0.565084] i915 device info: has_fpga_dbg: no
  660. [ 0.565085] i915 device info: has_full_ppgtt: yes
  661. [ 0.565086] i915 device info: has_full_48bit_ppgtt: no
  662. [ 0.565086] i915 device info: has_gmch_display: no
  663. [ 0.565087] i915 device info: has_guc: no
  664. [ 0.565088] i915 device info: has_guc_ct: no
  665. [ 0.565089] i915 device info: has_hotplug: yes
  666. [ 0.565089] i915 device info: has_l3_dpf: yes
  667. [ 0.565092] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:LVDS-1] probed modes :
  668. [ 0.565096] [drm:drm_mode_debug_printmodeline] Modeline 80:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
  669. [ 0.565096] i915 device info: has_llc: yes
  670. [ 0.565097] i915 device info: has_logical_ring_contexts: no
  671. [ 0.565098] i915 device info: has_logical_ring_preemption: no
  672. [ 0.565100] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:62:VGA-1]
  673. [ 0.565101] i915 device info: has_overlay: no
  674. [ 0.565103] [drm:intel_crt_detect] [CONNECTOR:62:VGA-1] force=1
  675. [ 0.565104] i915 device info: has_pooled_eu: no
  676. [ 0.565104] i915 device info: has_psr: no
  677. [ 0.565105] i915 device info: has_rc6: yes
  678. [ 0.565106] i915 device info: has_rc6p: yes
  679. [ 0.565107] [drm:intel_crt_detect] trigger hotplug detect cycle: adpa=0xf40000
  680. [ 0.565108] i915 device info: has_resource_streamer: no
  681. [ 0.565109] i915 device info: has_runtime_pm: no
  682. [ 0.565110] i915 device info: has_snoop: no
  683. [ 0.565110] i915 device info: unfenced_needs_alignment: no
  684. [ 0.565111] i915 device info: cursor_needs_physical: no
  685. [ 0.565112] i915 device info: hws_needs_physical: no
  686. [ 0.565113] i915 device info: overlay_needs_physical: no
  687. [ 0.565113] i915 device info: supports_tv: no
  688. [ 0.565114] i915 device info: has_ipc: no
  689. [ 0.565115] i915 device info: slice mask: 0000
  690. [ 0.565116] i915 device info: slice total: 0
  691. [ 0.565116] i915 device info: subslice total: 0
  692. [ 0.565117] i915 device info: subslice mask 0000
  693. [ 0.565118] i915 device info: subslice per slice: 0
  694. [ 0.565119] i915 device info: EU total: 0
  695. [ 0.565119] i915 device info: EU per subslice: 0
  696. [ 0.565121] i915 device info: has slice power gating: no
  697. [ 0.565122] i915 device info: has subslice power gating: no
  698. [ 0.565123] i915 device info: has EU power gating: no
  699. [ 0.565124] i915 device info: CS timestamp frequency: 12500 kHz
  700. [ 0.567006] brd: module loaded
  701. [ 0.568173] loop: module loaded
  702. [ 0.568416] ahci 0000:00:1f.2: version 3.0
  703. [ 0.568558] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
  704. [ 0.576680] [drm:intel_crt_detect] ironlake hotplug adpa=0xf40000, result 0
  705. [ 0.576682] [drm:intel_crt_detect] CRT not detected via hotplug
  706. [ 0.580060] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
  707. [ 0.580063] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
  708. [ 0.580075] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
  709. [ 0.580083] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
  710. [ 0.580599] scsi host0: ahci
  711. [ 0.580715] scsi host1: ahci
  712. [ 0.580792] scsi host2: ahci
  713. [ 0.580861] scsi host3: ahci
  714. [ 0.580935] scsi host4: ahci
  715. [ 0.581001] scsi host5: ahci
  716. [ 0.581035] ata1: SATA max UDMA/133 abar m2048@0xe163e000 port 0xe163e100 irq 25
  717. [ 0.581042] ata2: SATA max UDMA/133 abar m2048@0xe163e000 port 0xe163e180 irq 25
  718. [ 0.581047] ata3: SATA max UDMA/133 abar m2048@0xe163e000 port 0xe163e200 irq 25
  719. [ 0.581050] ata4: DUMMY
  720. [ 0.581052] ata5: DUMMY
  721. [ 0.581054] ata6: DUMMY
  722. [ 0.581104] tun: Universal TUN/TAP device driver, 1.6
  723. [ 0.581158] PPP generic driver version 2.4.2
  724. [ 0.581280] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  725. [ 0.581287] ehci-pci: EHCI PCI platform driver
  726. [ 0.581397] ehci-pci 0000:00:1a.0: EHCI Host Controller
  727. [ 0.581431] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
  728. [ 0.581449] ehci-pci 0000:00:1a.0: debug port 2
  729. [ 0.583355] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
  730. [ 0.583361] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
  731. [ 0.583364] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
  732. [ 0.583367] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
  733. [ 0.584166] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
  734. [ 0.584168] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
  735. [ 0.584170] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
  736. [ 0.584175] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:62:VGA-1] status updated from unknown to disconnected
  737. [ 0.584180] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:62:VGA-1] disconnected
  738. [ 0.584184] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:65:HDMI-A-1]
  739. [ 0.584187] [drm:intel_hdmi_detect] [CONNECTOR:65:HDMI-A-1]
  740. [ 0.585351] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
  741. [ 0.585363] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe163f000
  742. [ 0.596729] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
  743. [ 0.596763] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  744. [ 0.596767] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  745. [ 0.596771] usb usb1: Product: EHCI Host Controller
  746. [ 0.596774] usb usb1: Manufacturer: Linux 4.16.9+ ehci_hcd
  747. [ 0.596776] usb usb1: SerialNumber: 0000:00:1a.0
  748. [ 0.596885] hub 1-0:1.0: USB hub found
  749. [ 0.596897] hub 1-0:1.0: 3 ports detected
  750. [ 0.597110] ehci-pci 0000:00:1d.0: EHCI Host Controller
  751. [ 0.597149] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
  752. [ 0.597167] ehci-pci 0000:00:1d.0: debug port 2
  753. [ 0.601069] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
  754. [ 0.601081] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe1640000
  755. [ 0.613371] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
  756. [ 0.613422] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  757. [ 0.613426] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  758. [ 0.613429] usb usb2: Product: EHCI Host Controller
  759. [ 0.613432] usb usb2: Manufacturer: Linux 4.16.9+ ehci_hcd
  760. [ 0.613435] usb usb2: SerialNumber: 0000:00:1d.0
  761. [ 0.613543] hub 2-0:1.0: USB hub found
  762. [ 0.613555] hub 2-0:1.0: 3 ports detected
  763. [ 0.613664] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  764. [ 0.613673] ohci-pci: OHCI PCI platform driver
  765. [ 0.613722] usbcore: registered new interface driver usblp
  766. [ 0.613733] usbcore: registered new interface driver cdc_wdm
  767. [ 0.613748] usbcore: registered new interface driver usb-storage
  768. [ 0.613803] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
  769. [ 0.615354] serio: i8042 KBD port at 0x60,0x64 irq 1
  770. [ 0.615384] serio: i8042 AUX port at 0x60,0x64 irq 12
  771. [ 0.615476] mousedev: PS/2 mouse device common for all mice
  772. [ 0.615659] rtc_cmos 00:03: RTC can wake from S4
  773. [ 0.615779] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
  774. [ 0.615816] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
  775. [ 0.615969] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
  776. [ 0.616544] intel_pstate: Intel P-state driver initializing
  777. [ 0.616649] hidraw: raw HID events driver (C) Jiri Kosina
  778. [ 0.617105] usbcore: registered new interface driver usbhid
  779. [ 0.617115] usbhid: USB HID core driver
  780. [ 0.617258] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
  781. [ 0.617735] Initializing XFRM netlink socket
  782. [ 0.617980] NET: Registered protocol family 10
  783. [ 0.618303] Segment Routing with IPv6
  784. [ 0.618395] NET: Registered protocol family 17
  785. [ 0.618423] l2tp_core: L2TP core driver, V2.0
  786. [ 0.618440] Key type dns_resolver registered
  787. [ 0.618854] microcode: sig=0x306a9, pf=0x10, revision=0x1f
  788. [ 0.618941] microcode: Microcode Update Driver: v2.2.
  789. [ 0.618963] AVX version of gcm_enc/dec engaged.
  790. [ 0.618972] AES CTR mode by8 optimization enabled
  791. [ 0.619518] sched_clock: Marking stable (619511296, 0)->(600984746, 18526550)
  792. [ 0.619741] registered taskstats version 1
  793. [ 0.620229] console [netcon0] enabled
  794. [ 0.620235] netconsole: network logging started
  795. [ 0.620279] rtc_cmos 00:03: setting system clock to 2018-06-06 14:31:45 UTC (1528295505)
  796. [ 0.620357] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
  797. [ 0.620365] cfg80211: failed to load regulatory.db
  798. [ 0.640141] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
  799. [ 0.666694] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
  800. [ 0.666697] [drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
  801. [ 0.666699] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 1
  802. [ 0.693359] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
  803. [ 0.693361] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpb. force bit now 0
  804. [ 0.750036] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
  805. [ 0.776695] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6)
  806. [ 0.776700] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:65:HDMI-A-1] status updated from unknown to disconnected
  807. [ 0.776702] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:65:HDMI-A-1] disconnected
  808. [ 0.776706] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:70:DP-1]
  809. [ 0.776708] [drm:intel_dp_detect] [CONNECTOR:70:DP-1]
  810. [ 0.776712] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:70:DP-1] status updated from unknown to disconnected
  811. [ 0.776714] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:70:DP-1] disconnected
  812. [ 0.776716] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:HDMI-A-2]
  813. [ 0.776717] [drm:intel_hdmi_detect] [CONNECTOR:72:HDMI-A-2]
  814. [ 0.780044] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
  815. [ 0.780048] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
  816. [ 0.783374] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
  817. [ 0.783382] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
  818. [ 0.783398] [drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
  819. [ 0.783400] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpc. force bit now 1
  820. [ 0.784120] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
  821. [ 0.784122] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpc. force bit now 0
  822. [ 0.786709] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
  823. [ 0.786726] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
  824. [ 0.790054] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
  825. [ 0.790059] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6)
  826. [ 0.790063] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:HDMI-A-2] status updated from unknown to disconnected
  827. [ 0.790066] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:HDMI-A-2] disconnected
  828. [ 0.790070] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:74:HDMI-A-3]
  829. [ 0.790073] [drm:intel_hdmi_detect] [CONNECTOR:74:HDMI-A-3]
  830. [ 0.793385] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
  831. [ 0.793388] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK on first message, retry
  832. [ 0.796717] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
  833. [ 0.796722] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
  834. [ 0.796724] [drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
  835. [ 0.796727] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpd. force bit now 1
  836. [ 0.797466] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
  837. [ 0.797469] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpd. force bit now 0
  838. [ 0.800054] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1)
  839. [ 0.800058] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK on first message, retry
  840. [ 0.803387] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1)
  841. [ 0.803394] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6)
  842. [ 0.803399] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:74:HDMI-A-3] status updated from unknown to disconnected
  843. [ 0.803403] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:74:HDMI-A-3] disconnected
  844. [ 0.803408] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:DP-2]
  845. [ 0.803412] [drm:intel_dp_detect] [CONNECTOR:76:DP-2]
  846. [ 0.803419] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:DP-2] status updated from unknown to disconnected
  847. [ 0.803423] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:DP-2] disconnected
  848. [ 0.803427] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:78:DP-3]
  849. [ 0.803429] [drm:intel_dp_detect] [CONNECTOR:78:DP-3]
  850. [ 0.803868] [drm:intel_dp_read_dpcd] DPCD: 12 0a 02 41 00 00 00 00 00 00 00 00 00 0b 00
  851. [ 0.804187] [drm:intel_dp_print_rates] source rates: 162000, 270000
  852. [ 0.804190] [drm:intel_dp_print_rates] sink rates: 162000, 270000
  853. [ 0.804194] [drm:intel_dp_print_rates] common rates: 162000, 270000
  854. [ 0.804603] [drm:drm_dp_read_desc] DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
  855. [ 0.808798] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:78:DP-3] status updated from unknown to connected
  856. [ 0.808802] [drm:drm_add_display_info] non_desktop set to 0
  857. [ 0.808808] [drm:drm_add_edid_modes] ELD: no CEA Extension found
  858. [ 0.808810] [drm:drm_add_display_info] non_desktop set to 0
  859. [ 0.808843] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:78:DP-3] probed modes :
  860. [ 0.808850] [drm:drm_mode_debug_printmodeline] Modeline 82:"1920x1080" 60 139770 1920 1968 2000 2080 1080 1083 1089 1120 0x48 0x9
  861. [ 0.808854] [drm:drm_setup_crtcs] connector 58 enabled? yes
  862. [ 0.808858] [drm:drm_setup_crtcs] connector 62 enabled? no
  863. [ 0.808861] [drm:drm_setup_crtcs] connector 65 enabled? no
  864. [ 0.808864] [drm:drm_setup_crtcs] connector 70 enabled? no
  865. [ 0.808867] [drm:drm_setup_crtcs] connector 72 enabled? no
  866. [ 0.808871] [drm:drm_setup_crtcs] connector 74 enabled? no
  867. [ 0.808874] [drm:drm_setup_crtcs] connector 76 enabled? no
  868. [ 0.808877] [drm:drm_setup_crtcs] connector 78 enabled? yes
  869. [ 0.808885] [drm:intel_fb_initial_config] Not using firmware configuration
  870. [ 0.808889] [drm:drm_setup_crtcs] looking for cmdline mode on connector 58
  871. [ 0.808893] [drm:drm_setup_crtcs] looking for preferred mode on connector 58 0
  872. [ 0.808897] [drm:drm_setup_crtcs] found mode 1024x768
  873. [ 0.808900] [drm:drm_setup_crtcs] looking for cmdline mode on connector 78
  874. [ 0.808903] [drm:drm_setup_crtcs] looking for preferred mode on connector 78 0
  875. [ 0.808906] [drm:drm_setup_crtcs] found mode 1920x1080
  876. [ 0.808910] [drm:drm_setup_crtcs] picking CRTCs for 8192x8192 config
  877. [ 0.808918] [drm:drm_setup_crtcs] desired mode 1024x768 set on crtc 37 (0,0)
  878. [ 0.808923] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 47 (0,0)
  879. [ 0.808928] [drm:intelfb_create] no BIOS fb, allocating a new one
  880. [ 0.810663] [drm:intelfb_create] allocated 1920x1080 fb: 0x00061000
  881. [ 0.810783] fbcon: inteldrmfb (fb0) is primary device
  882. [ 0.810879] [drm:intel_atomic_check] [CONNECTOR:58:LVDS-1] checking for sink bpp constrains
  883. [ 0.810880] [drm:intel_atomic_check] clamping display bpp (was 36) to default limit of 24
  884. [ 0.810883] [drm:intel_lvds_compute_config] forcing display bpp (was 24) to LVDS (18)
  885. [ 0.810886] [drm:intel_atomic_check] checking fdi config on pipe A, lanes 1
  886. [ 0.810888] [drm:intel_atomic_check] hw max bpp: 36, pipe bpp: 18, dithering: 1
  887. [ 0.810890] [drm:intel_dump_pipe_config] [CRTC:37:pipe A][modeset]
  888. [ 0.810892] [drm:intel_dump_pipe_config] output_types: LVDS (0x10)
  889. [ 0.810894] [drm:intel_dump_pipe_config] cpu_transcoder: A, pipe bpp: 18, dithering: 1
  890. [ 0.810896] [drm:intel_dump_pipe_config] fdi: lanes: 1; gmch_m: 2271914, gmch_n: 4194304, link_m: 126217, link_n: 524288, tu: 64
  891. [ 0.810898] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
  892. [ 0.810899] [drm:intel_dump_pipe_config] requested mode:
  893. [ 0.810902] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
  894. [ 0.810904] [drm:intel_dump_pipe_config] adjusted mode:
  895. [ 0.810906] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
  896. [ 0.810909] [drm:intel_dump_pipe_config] crtc timings: 65000 1024 1048 1184 1344 768 771 777 806, type: 0x8 flags: 0xa
  897. [ 0.810911] [drm:intel_dump_pipe_config] port clock: 65000, pipe src size: 1024x768, pixel rate 65000
  898. [ 0.810913] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
  899. [ 0.810914] [drm:intel_dump_pipe_config] ips: 0, double wide: 0
  900. [ 0.810916] [drm:ibx_dump_hw_state] dpll_hw_state: dpll: 0xc4016001, dpll_md: 0x0, fp0: 0x20e08, fp1: 0x20e08
  901. [ 0.810918] [drm:intel_dump_pipe_config] planes on this crtc
  902. [ 0.810919] [drm:intel_dump_pipe_config] [PLANE:28:primary A] disabled, scaler_id = 0
  903. [ 0.810921] [drm:intel_dump_pipe_config] [PLANE:31:sprite A] disabled, scaler_id = 0
  904. [ 0.810922] [drm:intel_dump_pipe_config] [PLANE:34:cursor A] disabled, scaler_id = 0
  905. [ 0.810925] [drm:intel_atomic_check] [CONNECTOR:78:DP-3] checking for sink bpp constrains
  906. [ 0.810926] [drm:intel_atomic_check] clamping display bpp (was 36) to EDID reported max of 18
  907. [ 0.810930] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 139770KHz
  908. [ 0.810933] [drm:intel_dp_compute_config] DP link bw 06 rate select 00 lane count 2 clock 162000 bpp 18
  909. [ 0.810935] [drm:intel_dp_compute_config] DP link bw required 314483 available 324000
  910. [ 0.810937] [drm:intel_atomic_check] checking fdi config on pipe B, lanes 2
  911. [ 0.810938] [drm:intel_atomic_check] hw max bpp: 36, pipe bpp: 18, dithering: 1
  912. [ 0.810940] [drm:intel_dump_pipe_config] [CRTC:47:pipe B][modeset]
  913. [ 0.810941] [drm:intel_dump_pipe_config] output_types: DP (0x80)
  914. [ 0.810943] [drm:intel_dump_pipe_config] cpu_transcoder: B, pipe bpp: 18, dithering: 1
  915. [ 0.810945] [drm:intel_dump_pipe_config] fdi: lanes: 2; gmch_m: 4885315, gmch_n: 8388608, link_m: 271406, link_n: 524288, tu: 64
  916. [ 0.810947] [drm:intel_dump_pipe_config] dp m_n: lanes: 2; gmch_m: 4071096, gmch_n: 4194304, link_m: 226172, link_n: 262144, tu: 64
  917. [ 0.810948] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
  918. [ 0.810950] [drm:intel_dump_pipe_config] requested mode:
  919. [ 0.810953] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 139770 1920 1968 2000 2080 1080 1083 1089 1120 0x48 0x9
  920. [ 0.810954] [drm:intel_dump_pipe_config] adjusted mode:
  921. [ 0.810956] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 139770 1920 1968 2000 2080 1080 1083 1089 1120 0x48 0x9
  922. [ 0.810959] [drm:intel_dump_pipe_config] crtc timings: 139770 1920 1968 2000 2080 1080 1083 1089 1120, type: 0x48 flags: 0x9
  923. [ 0.810961] [drm:intel_dump_pipe_config] port clock: 162000, pipe src size: 1920x1080, pixel rate 139770
  924. [ 0.810962] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
  925. [ 0.810964] [drm:intel_dump_pipe_config] ips: 0, double wide: 0
  926. [ 0.810965] [drm:ibx_dump_hw_state] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0
  927. [ 0.810966] [drm:intel_dump_pipe_config] planes on this crtc
  928. [ 0.810968] [drm:intel_dump_pipe_config] [PLANE:38:primary B] disabled, scaler_id = 0
  929. [ 0.810969] [drm:intel_dump_pipe_config] [PLANE:41:sprite B] disabled, scaler_id = 0
  930. [ 0.810971] [drm:intel_dump_pipe_config] [PLANE:44:cursor B] disabled, scaler_id = 0
  931. [ 0.810978] [drm:ironlake_crtc_compute_clock] using SSC reference clock of 120000 kHz
  932. [ 0.810996] [drm:intel_find_shared_dpll] [CRTC:37:pipe A] allocated PCH DPLL A
  933. [ 0.810998] [drm:intel_reference_shared_dpll] using PCH DPLL A for pipe A
  934. [ 0.811001] [drm:intel_find_shared_dpll] [CRTC:47:pipe B] allocated PCH DPLL B
  935. [ 0.811003] [drm:intel_reference_shared_dpll] using PCH DPLL B for pipe B
  936. [ 0.811182] [drm:intel_disable_pipe] disabling pipe A
  937. [ 0.823589] [drm:intel_dp_link_down.isra.23]
  938. [ 0.840265] [drm:intel_disable_shared_dpll] disable PCH DPLL A (active 1, on? 1) for crtc 37
  939. [ 0.840274] [drm:intel_disable_shared_dpll] disabling PCH DPLL A
  940. [ 0.840492] [drm:intel_atomic_commit_tail] [ENCODER:59:LVDS]
  941. [ 0.840496] [drm:intel_atomic_commit_tail] [ENCODER:63:CRT]
  942. [ 0.840499] [drm:intel_atomic_commit_tail] [ENCODER:64:HDMI B]
  943. [ 0.840503] [drm:intel_atomic_commit_tail] [ENCODER:69:DP B]
  944. [ 0.840506] [drm:intel_atomic_commit_tail] [ENCODER:71:HDMI C]
  945. [ 0.840509] [drm:intel_atomic_commit_tail] [ENCODER:73:HDMI D]
  946. [ 0.840513] [drm:intel_atomic_commit_tail] [ENCODER:75:DP C]
  947. [ 0.840516] [drm:intel_atomic_commit_tail] [ENCODER:77:DP D]
  948. [ 0.840520] [drm:verify_single_dpll_state.isra.116] PCH DPLL A
  949. [ 0.840527] [drm:verify_single_dpll_state.isra.116] PCH DPLL B
  950. [ 0.840540] [drm:intel_prepare_shared_dpll] setting up PCH DPLL A
  951. [ 0.841113] [drm:intel_enable_pipe] enabling pipe A
  952. [ 0.841278] [drm:ivb_manual_fdi_link_train] FDI_RX_IIR before link train 0x700
  953. [ 0.841290] [drm:ivb_manual_fdi_link_train] FDI_RX_IIR 0x700
  954. [ 0.841294] [drm:ivb_manual_fdi_link_train] FDI train 1 done, level 0.
  955. [ 0.841304] [drm:ivb_manual_fdi_link_train] FDI_RX_IIR 0x600
  956. [ 0.841308] [drm:ivb_manual_fdi_link_train] FDI train 2 done, level 0.
  957. [ 0.841311] [drm:ironlake_crtc_enable] FDI train done.
  958. [ 0.841318] [drm:intel_enable_shared_dpll] enable PCH DPLL A (active 1, on? 0) for crtc 37
  959. [ 0.841320] [drm:intel_enable_shared_dpll] enabling PCH DPLL A
  960. [ 0.843381] [drm:intel_panel_enable_backlight] pipe A
  961. [ 0.843386] [drm:pch_enable_backlight] cpu backlight already enabled
  962. [ 0.843391] [drm:pch_enable_backlight] pch backlight already enabled
  963. [ 0.843398] [drm:intel_panel_actually_set_backlight] set backlight PWM = 4437
  964. [ 0.859466] [drm:intel_prepare_shared_dpll] setting up PCH DPLL B
  965. [ 0.860057] [drm:intel_enable_pipe] enabling pipe B
  966. [ 0.860069] [drm:cpt_set_fdi_bc_bifurcation] enabling fdi C rx
  967. [ 0.860230] [drm:ivb_manual_fdi_link_train] FDI_RX_IIR before link train 0x0
  968. [ 0.860243] [drm:ivb_manual_fdi_link_train] FDI_RX_IIR 0x100
  969. [ 0.860247] [drm:ivb_manual_fdi_link_train] FDI train 1 done, level 0.
  970. [ 0.860257] [drm:ivb_manual_fdi_link_train] FDI_RX_IIR 0x200
  971. [ 0.860261] [drm:ivb_manual_fdi_link_train] FDI train 2 done, level 0.
  972. [ 0.860265] [drm:ironlake_crtc_enable] FDI train done.
  973. [ 0.860272] [drm:intel_enable_shared_dpll] enable PCH DPLL B (active 2, on? 0) for crtc 47
  974. [ 0.860275] [drm:intel_enable_shared_dpll] enabling PCH DPLL B
  975. [ 0.861668] [drm:intel_dp_program_link_training_pattern] Using DP training pattern TPS1
  976. [ 0.862178] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
  977. [ 0.862182] [drm:intel_dp_set_signal_levels] Using vswing level 0
  978. [ 0.862186] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
  979. [ 0.862193] [drm:intel_dp_program_link_training_pattern] Using DP training pattern TPS1
  980. [ 0.862841] [drm:intel_dp_set_signal_levels] Using signal levels 02000000
  981. [ 0.862846] [drm:intel_dp_set_signal_levels] Using vswing level 1
  982. [ 0.862850] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
  983. [ 0.863483] [drm:intel_dp_set_signal_levels] Using signal levels 04000000
  984. [ 0.863488] [drm:intel_dp_set_signal_levels] Using vswing level 2
  985. [ 0.863492] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
  986. [ 0.864124] [drm:intel_dp_set_signal_levels] Using signal levels 06000000
  987. [ 0.864129] [drm:intel_dp_set_signal_levels] Using vswing level 3
  988. [ 0.864133] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
  989. [ 0.864760] [drm:intel_dp_start_link_train] Max Voltage Swing reached
  990. [ 0.864765] [drm:intel_dp_start_link_train] [CONNECTOR:78:DP-3] Link Training failed at link rate = 162000, lane count = 2
  991. [ 0.864780] [drm:intel_dp_modeset_retry_work_fn] [CONNECTOR:78:DP-3]
  992. [ 0.896763] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  993. [ 0.898295] [drm:verify_connector_state.isra.115] [CONNECTOR:58:LVDS-1]
  994. [ 0.898310] [drm:intel_atomic_commit_tail] [CRTC:37:pipe A]
  995. [ 0.898335] [drm:verify_single_dpll_state.isra.116] PCH DPLL A
  996. [ 0.898349] [drm:verify_connector_state.isra.115] [CONNECTOR:78:DP-3]
  997. [ 0.898358] [drm:intel_atomic_commit_tail] [CRTC:47:pipe B]
  998. [ 0.898383] [drm:verify_single_dpll_state.isra.116] PCH DPLL B
  999. [ 0.898543] ata1.00: ATA-9: KingDian S200 60GB, Q0707A, max UDMA/133
  1000. [ 0.898547] ata1.00: 117231408 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
  1001. [ 0.898621] [drm:intel_atomic_check] [CONNECTOR:78:DP-3] checking for sink bpp constrains
  1002. [ 0.898663] [drm:intel_atomic_check] clamping display bpp (was 36) to EDID reported max of 18
  1003. [ 0.898673] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 270000 pixel clock 139770KHz
  1004. [ 0.898678] [drm:intel_atomic_check] Encoder config failure
  1005. [ 0.898683] [drm:intel_dump_pipe_config] [CRTC:47:pipe B][failed]
  1006. [ 0.898688] [drm:intel_dump_pipe_config] output_types: DP (0x80)
  1007. [ 0.898692] [drm:intel_dump_pipe_config] cpu_transcoder: B, pipe bpp: 18, dithering: 0
  1008. [ 0.898697] [drm:intel_dump_pipe_config] fdi: lanes: 0; gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
  1009. [ 0.898701] [drm:intel_dump_pipe_config] dp m_n: lanes: 0; gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
  1010. [ 0.898705] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
  1011. [ 0.898707] [drm:intel_dump_pipe_config] requested mode:
  1012. [ 0.898717] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 139770 1920 1968 2000 2080 1080 1083 1089 1120 0x48 0x9
  1013. [ 0.898720] [drm:intel_dump_pipe_config] adjusted mode:
  1014. [ 0.898727] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 139770 1920 1968 2000 2080 1080 1083 1089 1120 0x48 0x9
  1015. [ 0.898733] [drm:intel_dump_pipe_config] crtc timings: 139770 1920 1968 2000 2080 1080 1083 1089 1120, type: 0x48 flags: 0x9
  1016. [ 0.898737] [drm:intel_dump_pipe_config] port clock: 0, pipe src size: 1920x1080, pixel rate 0
  1017. [ 0.898741] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
  1018. [ 0.898745] [drm:intel_dump_pipe_config] ips: 0, double wide: 0
  1019. [ 0.898751] [drm:ibx_dump_hw_state] dpll_hw_state: dpll: 0xc4020002, dpll_md: 0x0, fp0: 0x10c09, fp1: 0x10c09
  1020. [ 0.898754] [drm:intel_dump_pipe_config] planes on this crtc
  1021. [ 0.898761] [drm:intel_dump_pipe_config] [PLANE:38:primary B] FB:85, fb = 1920x1080 format = XR24 little-endian (0x34325258)
  1022. [ 0.898765] [drm:intel_dump_pipe_config] [PLANE:41:sprite B] disabled, scaler_id = 0
  1023. [ 0.898768] [drm:intel_dump_pipe_config] [PLANE:44:cursor B] disabled, scaler_id = 0
  1024. [ 0.902304] Console: switching to colour frame buffer device 128x48
  1025. [ 0.902362] [drm:intel_atomic_check] [CONNECTOR:78:DP-3] checking for sink bpp constrains
  1026. [ 0.902366] [drm:intel_atomic_check] clamping display bpp (was 36) to EDID reported max of 18
  1027. [ 0.902373] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 270000 pixel clock 139770KHz
  1028. [ 0.902377] [drm:intel_atomic_check] Encoder config failure
  1029. [ 0.902381] [drm:intel_dump_pipe_config] [CRTC:47:pipe B][failed]
  1030. [ 0.902385] [drm:intel_dump_pipe_config] output_types: DP (0x80)
  1031. [ 0.902389] [drm:intel_dump_pipe_config] cpu_transcoder: B, pipe bpp: 18, dithering: 0
  1032. [ 0.902393] [drm:intel_dump_pipe_config] fdi: lanes: 0; gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
  1033. [ 0.902398] [drm:intel_dump_pipe_config] dp m_n: lanes: 0; gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
  1034. [ 0.902401] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
  1035. [ 0.902404] [drm:intel_dump_pipe_config] requested mode:
  1036. [ 0.902413] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 139770 1920 1968 2000 2080 1080 1083 1089 1120 0x48 0x9
  1037. [ 0.902416] [drm:intel_dump_pipe_config] adjusted mode:
  1038. [ 0.902422] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 139770 1920 1968 2000 2080 1080 1083 1089 1120 0x48 0x9
  1039. [ 0.902428] [drm:intel_dump_pipe_config] crtc timings: 139770 1920 1968 2000 2080 1080 1083 1089 1120, type: 0x48 flags: 0x9
  1040. [ 0.902432] [drm:intel_dump_pipe_config] port clock: 0, pipe src size: 1920x1080, pixel rate 0
  1041. [ 0.902436] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
  1042. [ 0.902439] [drm:intel_dump_pipe_config] ips: 0, double wide: 0
  1043. [ 0.902444] [drm:ibx_dump_hw_state] dpll_hw_state: dpll: 0xc4020002, dpll_md: 0x0, fp0: 0x10c09, fp1: 0x10c09
  1044. [ 0.902447] [drm:intel_dump_pipe_config] planes on this crtc
  1045. [ 0.902453] [drm:intel_dump_pipe_config] [PLANE:38:primary B] FB:85, fb = 1920x1080 format = XR24 little-endian (0x34325258)
  1046. [ 0.902457] [drm:intel_dump_pipe_config] [PLANE:41:sprite B] disabled, scaler_id = 0
  1047. [ 0.902460] [drm:intel_dump_pipe_config] [PLANE:44:cursor B] disabled, scaler_id = 0
  1048. [ 0.906227] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
  1049. [ 0.906395] [drm:drm_fb_helper_hotplug_event.part.34]
  1050. [ 0.906404] [drm:drm_setup_crtcs]
  1051. [ 0.906418] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:LVDS-1]
  1052. [ 0.906425] [drm:intel_lvds_detect] [CONNECTOR:58:LVDS-1]
  1053. [ 0.906453] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:LVDS-1] probed modes :
  1054. [ 0.906462] [drm:drm_mode_debug_printmodeline] Modeline 80:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
  1055. [ 0.906467] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:62:VGA-1]
  1056. [ 0.906471] [drm:intel_crt_detect] [CONNECTOR:62:VGA-1] force=1
  1057. [ 0.906480] [drm:intel_crt_detect] ironlake hotplug adpa=0xf40000, result 0
  1058. [ 0.906483] [drm:intel_crt_detect] CRT not detected via hotplug
  1059. [ 0.906711] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
  1060. [ 0.906715] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
  1061. [ 0.908000] ata1.00: configured for UDMA/133
  1062. [ 0.908352] scsi 0:0:0:0: Direct-Access ATA KingDian S200 60 7A PQ: 0 ANSI: 5
  1063. [ 0.909069] sd 0:0:0:0: Attached scsi generic sg0 type 0
  1064. [ 0.909198] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.9 GiB)
  1065. [ 0.909245] sd 0:0:0:0: [sda] Write Protect is off
  1066. [ 0.909265] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  1067. [ 0.909286] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  1068. [ 0.909652] sda: sda1
  1069. [ 0.909823] sd 0:0:0:0: [sda] Attached SCSI disk
  1070. [ 0.910023] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
  1071. [ 0.910029] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
  1072. [ 0.910031] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
  1073. [ 0.910033] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
  1074. [ 0.910758] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
  1075. [ 0.910759] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
  1076. [ 0.910761] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
  1077. [ 0.910764] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:62:VGA-1] disconnected
  1078. [ 0.910769] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:65:HDMI-A-1]
  1079. [ 0.910771] [drm:intel_hdmi_detect] [CONNECTOR:65:HDMI-A-1]
  1080. [ 0.926757] usb 1-1: new high-speed USB device number 2 using ehci-pci
  1081. [ 0.943425] usb 2-1: new high-speed USB device number 2 using ehci-pci
  1082. [ 0.959207] random: fast init done
  1083. [ 0.966757] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
  1084. [ 0.993361] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
  1085. [ 0.993363] [drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
  1086. [ 0.993365] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 1
  1087. [ 1.020026] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
  1088. [ 1.020029] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpb. force bit now 0
  1089. [ 1.073993] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
  1090. [ 1.074066] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  1091. [ 1.074596] hub 1-1:1.0: USB hub found
  1092. [ 1.074884] hub 1-1:1.0: 6 ports detected
  1093. [ 1.079010] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
  1094. [ 1.090411] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
  1095. [ 1.090443] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  1096. [ 1.090682] hub 2-1:1.0: USB hub found
  1097. [ 1.091533] hub 2-1:1.0: 8 ports detected
  1098. [ 1.103365] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6)
  1099. [ 1.103369] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:65:HDMI-A-1] disconnected
  1100. [ 1.103373] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:70:DP-1]
  1101. [ 1.103376] [drm:intel_dp_detect] [CONNECTOR:70:DP-1]
  1102. [ 1.103380] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:70:DP-1] disconnected
  1103. [ 1.103383] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:HDMI-A-2]
  1104. [ 1.103384] [drm:intel_hdmi_detect] [CONNECTOR:72:HDMI-A-2]
  1105. [ 1.103565] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
  1106. [ 1.103569] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
  1107. [ 1.103745] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
  1108. [ 1.103752] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
  1109. [ 1.103755] [drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
  1110. [ 1.103759] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpc. force bit now 1
  1111. [ 1.104481] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
  1112. [ 1.104483] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpc. force bit now 0
  1113. [ 1.104653] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
  1114. [ 1.104656] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
  1115. [ 1.104831] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
  1116. [ 1.104835] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6)
  1117. [ 1.104840] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:HDMI-A-2] disconnected
  1118. [ 1.104845] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:74:HDMI-A-3]
  1119. [ 1.104848] [drm:intel_hdmi_detect] [CONNECTOR:74:HDMI-A-3]
  1120. [ 1.105025] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
  1121. [ 1.105028] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK on first message, retry
  1122. [ 1.105203] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
  1123. [ 1.105208] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
  1124. [ 1.105211] [drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
  1125. [ 1.105214] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpd. force bit now 1
  1126. [ 1.105935] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
  1127. [ 1.105936] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpd. force bit now 0
  1128. [ 1.106107] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1)
  1129. [ 1.106110] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK on first message, retry
  1130. [ 1.106286] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1)
  1131. [ 1.106290] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6)
  1132. [ 1.106295] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:74:HDMI-A-3] disconnected
  1133. [ 1.106299] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:DP-2]
  1134. [ 1.106302] [drm:intel_dp_detect] [CONNECTOR:76:DP-2]
  1135. [ 1.106308] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:DP-2] disconnected
  1136. [ 1.106313] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:78:DP-3]
  1137. [ 1.106316] [drm:intel_dp_detect] [CONNECTOR:78:DP-3]
  1138. [ 1.106740] [drm:intel_dp_read_dpcd] DPCD: 12 0a 02 41 00 00 00 00 00 00 00 00 00 0b 00
  1139. [ 1.107042] [drm:intel_dp_print_rates] source rates: 162000, 270000
  1140. [ 1.107044] [drm:intel_dp_print_rates] sink rates: 162000, 270000
  1141. [ 1.107045] [drm:intel_dp_print_rates] common rates: 162000, 270000
  1142. [ 1.107435] [drm:drm_dp_read_desc] DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
  1143. [ 1.111464] [drm:drm_add_display_info] non_desktop set to 0
  1144. [ 1.111467] [drm:drm_add_edid_modes] ELD: no CEA Extension found
  1145. [ 1.111468] [drm:drm_add_display_info] non_desktop set to 0
  1146. [ 1.111481] [drm:drm_mode_debug_printmodeline] Modeline 82:"1920x1080" 60 139770 1920 1968 2000 2080 1080 1083 1089 1120 0x48 0x9
  1147. [ 1.111483] [drm:drm_mode_prune_invalid] Not using 1920x1080 mode: CLOCK_HIGH
  1148. [ 1.111485] [drm:drm_setup_crtcs] connector 58 enabled? yes
  1149. [ 1.111487] [drm:drm_setup_crtcs] connector 62 enabled? no
  1150. [ 1.111497] [drm:drm_setup_crtcs] connector 65 enabled? no
  1151. [ 1.111499] [drm:drm_setup_crtcs] connector 70 enabled? no
  1152. [ 1.111500] [drm:drm_setup_crtcs] connector 72 enabled? no
  1153. [ 1.111501] [drm:drm_setup_crtcs] connector 74 enabled? no
  1154. [ 1.111503] [drm:drm_setup_crtcs] connector 76 enabled? no
  1155. [ 1.111504] [drm:drm_setup_crtcs] connector 78 enabled? yes
  1156. [ 1.111508] [drm:intel_fb_initial_config] Not using firmware configuration
  1157. [ 1.111510] [drm:drm_setup_crtcs] looking for cmdline mode on connector 58
  1158. [ 1.111511] [drm:drm_setup_crtcs] looking for preferred mode on connector 58 0
  1159. [ 1.111513] [drm:drm_setup_crtcs] found mode 1024x768
  1160. [ 1.111514] [drm:drm_setup_crtcs] looking for cmdline mode on connector 78
  1161. [ 1.111516] [drm:drm_setup_crtcs] looking for preferred mode on connector 78 0
  1162. [ 1.111517] [drm:drm_setup_crtcs] found mode none
  1163. [ 1.111519] [drm:drm_setup_crtcs] picking CRTCs for 1920x1080 config
  1164. [ 1.111522] [drm:drm_setup_crtcs] desired mode 1024x768 set on crtc 37 (0,0)
  1165. [ 1.111528] [drm:drm_fb_helper_hotplug_event.part.34]
  1166. [ 1.111529] [drm:drm_setup_crtcs]
  1167. [ 1.111532] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:LVDS-1]
  1168. [ 1.111533] [drm:intel_lvds_detect] [CONNECTOR:58:LVDS-1]
  1169. [ 1.111541] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:LVDS-1] probed modes :
  1170. [ 1.111544] [drm:drm_mode_debug_printmodeline] Modeline 80:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
  1171. [ 1.111546] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:62:VGA-1]
  1172. [ 1.111547] [drm:intel_crt_detect] [CONNECTOR:62:VGA-1] force=1
  1173. [ 1.111551] [drm:intel_crt_detect] ironlake hotplug adpa=0xf40000, result 0
  1174. [ 1.111552] [drm:intel_crt_detect] CRT not detected via hotplug
  1175. [ 1.111722] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
  1176. [ 1.111725] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
  1177. [ 1.111901] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
  1178. [ 1.111905] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
  1179. [ 1.111908] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
  1180. [ 1.111912] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
  1181. [ 1.112630] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
  1182. [ 1.112631] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
  1183. [ 1.112632] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
  1184. [ 1.112634] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:62:VGA-1] disconnected
  1185. [ 1.112636] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:65:HDMI-A-1]
  1186. [ 1.112637] [drm:intel_hdmi_detect] [CONNECTOR:65:HDMI-A-1]
  1187. [ 1.168648] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
  1188. [ 1.193358] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
  1189. [ 1.193360] [drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
  1190. [ 1.193362] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 1
  1191. [ 1.220023] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
  1192. [ 1.220025] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpb. force bit now 0
  1193. [ 1.226774] tsc: Refined TSC clocksource calibration: 2594.107 MHz
  1194. [ 1.228437] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x25647d583cf, max_idle_ns: 440795304232 ns
  1195. [ 1.229675] ata2: SATA link down (SStatus 0 SControl 300)
  1196. [ 1.231619] clocksource: Switched to clocksource tsc
  1197. [ 1.279002] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
  1198. [ 1.303359] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6)
  1199. [ 1.303364] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:65:HDMI-A-1] disconnected
  1200. [ 1.303368] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:70:DP-1]
  1201. [ 1.303371] [drm:intel_dp_detect] [CONNECTOR:70:DP-1]
  1202. [ 1.303376] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:70:DP-1] disconnected
  1203. [ 1.303378] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:HDMI-A-2]
  1204. [ 1.303379] [drm:intel_hdmi_detect] [CONNECTOR:72:HDMI-A-2]
  1205. [ 1.303555] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
  1206. [ 1.303559] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
  1207. [ 1.303740] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
  1208. [ 1.303746] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
  1209. [ 1.303749] [drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
  1210. [ 1.303753] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpc. force bit now 1
  1211. [ 1.304469] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
  1212. [ 1.304470] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpc. force bit now 0
  1213. [ 1.304643] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
  1214. [ 1.304646] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
  1215. [ 1.304823] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
  1216. [ 1.304827] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6)
  1217. [ 1.304832] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:HDMI-A-2] disconnected
  1218. [ 1.304837] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:74:HDMI-A-3]
  1219. [ 1.304840] [drm:intel_hdmi_detect] [CONNECTOR:74:HDMI-A-3]
  1220. [ 1.305014] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
  1221. [ 1.305017] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK on first message, retry
  1222. [ 1.305192] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
  1223. [ 1.305196] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
  1224. [ 1.305199] [drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
  1225. [ 1.305203] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpd. force bit now 1
  1226. [ 1.305915] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
  1227. [ 1.305916] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpd. force bit now 0
  1228. [ 1.306088] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1)
  1229. [ 1.306091] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK on first message, retry
  1230. [ 1.306267] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1)
  1231. [ 1.306271] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6)
  1232. [ 1.306275] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:74:HDMI-A-3] disconnected
  1233. [ 1.306280] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:DP-2]
  1234. [ 1.306283] [drm:intel_dp_detect] [CONNECTOR:76:DP-2]
  1235. [ 1.306290] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:DP-2] disconnected
  1236. [ 1.306294] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:78:DP-3]
  1237. [ 1.306297] [drm:intel_dp_detect] [CONNECTOR:78:DP-3]
  1238. [ 1.306718] [drm:intel_dp_read_dpcd] DPCD: 12 0a 02 41 00 00 00 00 00 00 00 00 00 0b 00
  1239. [ 1.307015] [drm:intel_dp_print_rates] source rates: 162000, 270000
  1240. [ 1.307017] [drm:intel_dp_print_rates] sink rates: 162000, 270000
  1241. [ 1.307018] [drm:intel_dp_print_rates] common rates: 162000, 270000
  1242. [ 1.307408] [drm:drm_dp_read_desc] DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
  1243. [ 1.311437] [drm:drm_add_display_info] non_desktop set to 0
  1244. [ 1.311441] [drm:drm_add_edid_modes] ELD: no CEA Extension found
  1245. [ 1.311442] [drm:drm_add_display_info] non_desktop set to 0
  1246. [ 1.311454] [drm:drm_mode_debug_printmodeline] Modeline 79:"1920x1080" 60 139770 1920 1968 2000 2080 1080 1083 1089 1120 0x48 0x9
  1247. [ 1.311456] [drm:drm_mode_prune_invalid] Not using 1920x1080 mode: CLOCK_HIGH
  1248. [ 1.311459] [drm:drm_setup_crtcs] connector 58 enabled? yes
  1249. [ 1.311461] [drm:drm_setup_crtcs] connector 62 enabled? no
  1250. [ 1.311462] [drm:drm_setup_crtcs] connector 65 enabled? no
  1251. [ 1.311464] [drm:drm_setup_crtcs] connector 70 enabled? no
  1252. [ 1.311465] [drm:drm_setup_crtcs] connector 72 enabled? no
  1253. [ 1.311467] [drm:drm_setup_crtcs] connector 74 enabled? no
  1254. [ 1.311468] [drm:drm_setup_crtcs] connector 76 enabled? no
  1255. [ 1.311469] [drm:drm_setup_crtcs] connector 78 enabled? yes
  1256. [ 1.311474] [drm:intel_fb_initial_config] Not using firmware configuration
  1257. [ 1.311476] [drm:drm_setup_crtcs] looking for cmdline mode on connector 58
  1258. [ 1.311478] [drm:drm_setup_crtcs] looking for preferred mode on connector 58 0
  1259. [ 1.311479] [drm:drm_setup_crtcs] found mode 1024x768
  1260. [ 1.311481] [drm:drm_setup_crtcs] looking for cmdline mode on connector 78
  1261. [ 1.311482] [drm:drm_setup_crtcs] looking for preferred mode on connector 78 0
  1262. [ 1.311484] [drm:drm_setup_crtcs] found mode none
  1263. [ 1.311485] [drm:drm_setup_crtcs] picking CRTCs for 1920x1080 config
  1264. [ 1.311489] [drm:drm_setup_crtcs] desired mode 1024x768 set on crtc 37 (0,0)
  1265. [ 1.311689] [drm:intel_disable_pipe] disabling pipe B
  1266. [ 1.317115] [drm:intel_dp_link_down.isra.23]
  1267. [ 1.328914] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
  1268. [ 1.334130] [drm:intel_disable_shared_dpll] disable PCH DPLL B (active 2, on? 1) for crtc 47
  1269. [ 1.334142] [drm:intel_disable_shared_dpll] disabling PCH DPLL B
  1270. [ 1.334362] [drm:intel_atomic_commit_tail] [ENCODER:59:LVDS]
  1271. [ 1.334367] [drm:intel_atomic_commit_tail] [ENCODER:63:CRT]
  1272. [ 1.334371] [drm:intel_atomic_commit_tail] [ENCODER:64:HDMI B]
  1273. [ 1.334375] [drm:intel_atomic_commit_tail] [ENCODER:69:DP B]
  1274. [ 1.334379] [drm:intel_atomic_commit_tail] [ENCODER:71:HDMI C]
  1275. [ 1.334383] [drm:intel_atomic_commit_tail] [ENCODER:73:HDMI D]
  1276. [ 1.334387] [drm:intel_atomic_commit_tail] [ENCODER:75:DP C]
  1277. [ 1.334391] [drm:intel_atomic_commit_tail] [ENCODER:77:DP D]
  1278. [ 1.334398] [drm:verify_connector_state.isra.115] [CONNECTOR:78:DP-3]
  1279. [ 1.334404] [drm:verify_single_dpll_state.isra.116] PCH DPLL A
  1280. [ 1.334412] [drm:verify_single_dpll_state.isra.116] PCH DPLL B
  1281. [ 1.343806] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input6
  1282. [ 1.343896] [drm:intel_atomic_commit_tail] [CRTC:47:pipe B]
  1283. [ 1.353420] usb 1-1.2: new high-speed USB device number 3 using ehci-pci
  1284. [ 1.360761] [drm:drm_fb_helper_hotplug_event.part.34]
  1285. [ 1.360766] [drm:drm_setup_crtcs]
  1286. [ 1.360774] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:LVDS-1]
  1287. [ 1.360782] [drm:intel_lvds_detect] [CONNECTOR:58:LVDS-1]
  1288. [ 1.360812] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:LVDS-1] probed modes :
  1289. [ 1.360822] [drm:drm_mode_debug_printmodeline] Modeline 80:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
  1290. [ 1.360827] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:62:VGA-1]
  1291. [ 1.360833] [drm:intel_crt_detect] [CONNECTOR:62:VGA-1] force=1
  1292. [ 1.360843] [drm:intel_crt_detect] ironlake hotplug adpa=0xf40000, result 0
  1293. [ 1.360845] [drm:intel_crt_detect] CRT not detected via hotplug
  1294. [ 1.361051] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
  1295. [ 1.361054] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
  1296. [ 1.361246] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
  1297. [ 1.361253] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
  1298. [ 1.361256] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
  1299. [ 1.361260] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
  1300. [ 1.362006] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
  1301. [ 1.362011] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
  1302. [ 1.362014] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
  1303. [ 1.362020] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:62:VGA-1] disconnected
  1304. [ 1.362025] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:65:HDMI-A-1]
  1305. [ 1.362030] [drm:intel_hdmi_detect] [CONNECTOR:65:HDMI-A-1]
  1306. [ 1.417138] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
  1307. [ 1.443366] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
  1308. [ 1.443368] [drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
  1309. [ 1.443370] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 1
  1310. [ 1.450912] usb 1-1.2: New USB device found, idVendor=0781, idProduct=5571
  1311. [ 1.451677] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  1312. [ 1.452447] usb 1-1.2: Product: Cruzer Fit
  1313. [ 1.453223] usb 1-1.2: Manufacturer: SanDisk
  1314. [ 1.453979] usb 1-1.2: SerialNumber: 4C530302860403105213
  1315. [ 1.454974] usb-storage 1-1.2:1.0: USB Mass Storage device detected
  1316. [ 1.459219] scsi host6: usb-storage 1-1.2:1.0
  1317. [ 1.470033] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
  1318. [ 1.470044] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpb. force bit now 0
  1319. [ 1.527760] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
  1320. [ 1.533400] usb 1-1.4: new full-speed USB device number 4 using ehci-pci
  1321. [ 1.543518] ata3: SATA link down (SStatus 0 SControl 300)
  1322. [ 1.544915] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
  1323. [ 1.545823] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities
  1324. [ 1.549967] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
  1325. [ 1.550888] VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
  1326. [ 1.553361] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6)
  1327. [ 1.553364] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:65:HDMI-A-1] disconnected
  1328. [ 1.553368] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:70:DP-1]
  1329. [ 1.553370] [drm:intel_dp_detect] [CONNECTOR:70:DP-1]
  1330. [ 1.553375] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:70:DP-1] disconnected
  1331. [ 1.553377] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:HDMI-A-2]
  1332. [ 1.553378] [drm:intel_hdmi_detect] [CONNECTOR:72:HDMI-A-2]
  1333. [ 1.553552] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
  1334. [ 1.553555] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
  1335. [ 1.553635] devtmpfs: mounted
  1336. [ 1.553740] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
  1337. [ 1.554739] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
  1338. [ 1.554740] [drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
  1339. [ 1.554743] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpc. force bit now 1
  1340. [ 1.555459] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
  1341. [ 1.555462] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpc. force bit now 0
  1342. [ 1.555631] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
  1343. [ 1.555633] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
  1344. [ 1.555802] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
  1345. [ 1.555806] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6)
  1346. [ 1.555809] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:HDMI-A-2] disconnected
  1347. [ 1.555813] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:74:HDMI-A-3]
  1348. [ 1.555815] [drm:intel_hdmi_detect] [CONNECTOR:74:HDMI-A-3]
  1349. [ 1.555989] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
  1350. [ 1.555991] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK on first message, retry
  1351. [ 1.556017] Freeing unused kernel memory: 1144K
  1352. [ 1.556164] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
  1353. [ 1.557085] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
  1354. [ 1.557087] [drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
  1355. [ 1.557089] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpd. force bit now 1
  1356. [ 1.557090] Write protecting the kernel read-only data: 18432k
  1357. [ 1.558611] Freeing unused kernel memory: 2020K
  1358. [ 1.558844] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
  1359. [ 1.559627] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpd. force bit now 0
  1360. [ 1.559801] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1)
  1361. [ 1.559803] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK on first message, retry
  1362. [ 1.559972] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1)
  1363. [ 1.559975] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6)
  1364. [ 1.559978] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:74:HDMI-A-3] disconnected
  1365. [ 1.559982] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:DP-2]
  1366. [ 1.559985] [drm:intel_dp_detect] [CONNECTOR:76:DP-2]
  1367. [ 1.559989] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:DP-2] disconnected
  1368. [ 1.559992] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:78:DP-3]
  1369. [ 1.559995] [drm:intel_dp_detect] [CONNECTOR:78:DP-3]
  1370. [ 1.560424] [drm:intel_dp_read_dpcd] DPCD: 12 0a 02 41 00 00 00 00 00 00 00 00 00 0b 00
  1371. [ 1.560722] [drm:intel_dp_print_rates] source rates: 162000, 270000
  1372. [ 1.560725] [drm:intel_dp_print_rates] sink rates: 162000, 270000
  1373. [ 1.560727] [drm:intel_dp_print_rates] common rates: 162000, 270000
  1374. [ 1.561116] [drm:drm_dp_read_desc] DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
  1375. [ 1.562257] Freeing unused kernel memory: 1076K
  1376. [ 1.563229] rodata_test: all tests were successful
  1377. [ 1.565151] [drm:drm_add_display_info] non_desktop set to 0
  1378. [ 1.565155] [drm:drm_add_edid_modes] ELD: no CEA Extension found
  1379. [ 1.565157] [drm:drm_add_display_info] non_desktop set to 0
  1380. [ 1.565169] [drm:drm_mode_debug_printmodeline] Modeline 82:"1920x1080" 60 139770 1920 1968 2000 2080 1080 1083 1089 1120 0x48 0x9
  1381. [ 1.565171] [drm:drm_mode_prune_invalid] Not using 1920x1080 mode: CLOCK_HIGH
  1382. [ 1.565174] [drm:drm_setup_crtcs] connector 58 enabled? yes
  1383. [ 1.565175] [drm:drm_setup_crtcs] connector 62 enabled? no
  1384. [ 1.565177] [drm:drm_setup_crtcs] connector 65 enabled? no
  1385. [ 1.565178] [drm:drm_setup_crtcs] connector 70 enabled? no
  1386. [ 1.565180] [drm:drm_setup_crtcs] connector 72 enabled? no
  1387. [ 1.565181] [drm:drm_setup_crtcs] connector 74 enabled? no
  1388. [ 1.565183] [drm:drm_setup_crtcs] connector 76 enabled? no
  1389. [ 1.565184] [drm:drm_setup_crtcs] connector 78 enabled? yes
  1390. [ 1.565188] [drm:intel_fb_initial_config] Not using firmware configuration
  1391. [ 1.565190] [drm:drm_setup_crtcs] looking for cmdline mode on connector 58
  1392. [ 1.565192] [drm:drm_setup_crtcs] looking for preferred mode on connector 58 0
  1393. [ 1.565193] [drm:drm_setup_crtcs] found mode 1024x768
  1394. [ 1.565195] [drm:drm_setup_crtcs] looking for cmdline mode on connector 78
  1395. [ 1.565196] [drm:drm_setup_crtcs] looking for preferred mode on connector 78 0
  1396. [ 1.565198] [drm:drm_setup_crtcs] found mode none
  1397. [ 1.565199] [drm:drm_setup_crtcs] picking CRTCs for 1920x1080 config
  1398. [ 1.565203] [drm:drm_setup_crtcs] desired mode 1024x768 set on crtc 37 (0,0)
  1399. [ 1.624495] kbd_mode (1783) used greatest stack depth: 13968 bytes left
  1400. [ 1.628230] loadkeys (1784) used greatest stack depth: 13760 bytes left
  1401. [ 1.629585] init-early.sh (1782) used greatest stack depth: 13200 bytes left
  1402. [ 1.641686] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
  1403. [ 1.643135] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  1404. [ 1.644769] usb 1-1.4: Product: BCM20702A0
  1405. [ 1.645782] usb 1-1.4: Manufacturer: Broadcom Corp
  1406. [ 1.646802] usb 1-1.4: SerialNumber: 48D224094B3F
  1407. [ 1.720029] usb 1-1.6: new high-speed USB device number 5 using ehci-pci
  1408. [ 1.827839] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d2
  1409. [ 1.829544] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  1410. [ 1.831200] usb 1-1.6: Product: Integrated Camera
  1411. [ 1.832470] usb 1-1.6: Manufacturer: Ricoh Company Ltd.
  1412. [ 2.056361] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
  1413. [ 2.071507] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input8
  1414. [ 2.343442] udevd[2123]: starting version 3.2.5
  1415. [ 2.347605] random: udevd: uninitialized urandom read (16 bytes read)
  1416. [ 2.347984] random: udevd: uninitialized urandom read (16 bytes read)
  1417. [ 2.348000] random: udevd: uninitialized urandom read (16 bytes read)
  1418. [ 2.354410] udevd[2124]: starting eudev-3.2.5
  1419. [ 2.444686] video: exports duplicate symbol acpi_video_get_backlight_type (owned by kernel)
  1420. [ 2.457423] [drm:intel_lvds_detect] [CONNECTOR:58:LVDS-1]
  1421. [ 2.476875] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  1422. [ 2.476877] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  1423. [ 2.476956] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
  1424. [ 2.480543] scsi 6:0:0:0: Direct-Access SanDisk Cruzer Fit 1.27 PQ: 0 ANSI: 6
  1425. [ 2.480653] sd 6:0:0:0: Attached scsi generic sg1 type 0
  1426. [ 2.481283] sd 6:0:0:0: [sdb] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB)
  1427. [ 2.482656] sd 6:0:0:0: [sdb] Write Protect is off
  1428. [ 2.482657] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
  1429. [ 2.483656] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
  1430. [ 2.489536] sdb: sdb1
  1431. [ 2.492541] sd 6:0:0:0: [sdb] Attached SCSI removable disk
  1432. [ 2.495865] video: exports duplicate symbol acpi_video_get_backlight_type (owned by kernel)
  1433. [ 2.497617] Intel(R) Wireless WiFi driver for Linux
  1434. [ 2.497618] Copyright(c) 2003- 2015 Intel Corporation
  1435. [ 2.498349] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-6000g2a-6.ucode failed with error -2
  1436. [ 2.498359] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-6000g2a-5.ucode failed with error -2
  1437. [ 2.498362] iwlwifi 0000:02:00.0: no suitable firmware found!
  1438. [ 2.498363] iwlwifi 0000:02:00.0: minimum version required: iwlwifi-6000g2a-5
  1439. [ 2.498365] iwlwifi 0000:02:00.0: maximum version supported: iwlwifi-6000g2a-6
  1440. [ 2.498367] iwlwifi 0000:02:00.0: check git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
  1441. [ 2.498729] sdhci: Secure Digital Host Controller Interface driver
  1442. [ 2.498729] sdhci: Copyright(c) Pierre Ossman
  1443. [ 2.503877] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
  1444. [ 2.520352] video: exports duplicate symbol acpi_video_get_backlight_type (owned by kernel)
  1445. [ 2.540703] Bluetooth: Core ver 2.22
  1446. [ 2.540715] NET: Registered protocol family 31
  1447. [ 2.540716] Bluetooth: HCI device and connection manager initialized
  1448. [ 2.540720] Bluetooth: HCI socket layer initialized
  1449. [ 2.540722] Bluetooth: L2CAP socket layer initialized
  1450. [ 2.540727] Bluetooth: SCO socket layer initialized
  1451. [ 2.567273] video: exports duplicate symbol acpi_video_get_backlight_type (owned by kernel)
  1452. [ 2.567617] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e823] (rev 4)
  1453. [ 2.567954] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
  1454. [ 2.568064] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA
  1455. [ 2.569780] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d2)
  1456. [ 2.577777] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input9
  1457. [ 2.577836] usbcore: registered new interface driver uvcvideo
  1458. [ 2.577837] USB Video Class driver (1.1.1)
  1459. [ 2.579665] usbcore: registered new interface driver btusb
  1460. [ 2.618558] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
  1461. [ 2.695701] Bluetooth: hci0: BCM: chip id 63
  1462. [ 2.696585] Bluetooth: hci0: BCM: features 0x07
  1463. [ 2.712703] Bluetooth: hci0: BCM20702A
  1464. [ 2.713763] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
  1465. [ 2.713793] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2
  1466. [ 2.713806] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found
  1467. [ 2.741423] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:b7:ae:1e
  1468. [ 2.741431] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
  1469. [ 2.741459] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
  1470. [ 2.741648] xhci_hcd 0000:00:14.0: xHCI Host Controller
  1471. [ 2.742079] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
  1472. [ 2.743053] e1000e 0000:00:19.0 enp0s25: renamed from eth0
  1473. [ 2.743171] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x0000b930
  1474. [ 2.743179] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
  1475. [ 2.743426] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  1476. [ 2.743427] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  1477. [ 2.743429] usb usb3: Product: xHCI Host Controller
  1478. [ 2.743430] usb usb3: Manufacturer: Linux 4.16.9+ xhci-hcd
  1479. [ 2.743431] usb usb3: SerialNumber: 0000:00:14.0
  1480. [ 2.743609] hub 3-0:1.0: USB hub found
  1481. [ 2.743626] hub 3-0:1.0: 4 ports detected
  1482. [ 2.743763] xhci_hcd 0000:00:14.0: xHCI Host Controller
  1483. [ 2.743793] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
  1484. [ 2.743849] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
  1485. [ 2.743850] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  1486. [ 2.743851] usb usb4: Product: xHCI Host Controller
  1487. [ 2.743852] usb usb4: Manufacturer: Linux 4.16.9+ xhci-hcd
  1488. [ 2.743853] usb usb4: SerialNumber: 0000:00:14.0
  1489. [ 2.743927] hub 4-0:1.0: USB hub found
  1490. [ 2.743938] hub 4-0:1.0: 4 ports detected
  1491. [ 3.224741] EXT4-fs (sda1): re-mounted. Opts: data=ordered
  1492. [ 3.553567] urandom_read: 4 callbacks suppressed
  1493. [ 3.553568] random: mktemp: uninitialized urandom read (10 bytes read)
  1494. [ 3.729662] random: udevd: uninitialized urandom read (16 bytes read)
  1495. [ 3.729685] random: udevd: uninitialized urandom read (16 bytes read)
  1496. [ 3.731282] udevd (2163) used greatest stack depth: 12984 bytes left
  1497. [ 4.497019] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
  1498. [ 4.497309] ip (3034) used greatest stack depth: 12864 bytes left
  1499. [ 4.746768] mei_me 0000:00:16.0: wait hw ready failed
  1500. [ 4.746774] mei_me 0000:00:16.0: hw_start failed ret = -62
  1501. [ 4.746791] mei_me 0000:00:16.0: H_RST is set = 0x80000015
  1502. [ 6.002704] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
  1503. [ 6.002712] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
  1504. [ 6.002758] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
  1505. [ 6.880096] mei_me 0000:00:16.0: wait hw ready failed
  1506. [ 6.880103] mei_me 0000:00:16.0: hw_start failed ret = -62
  1507. [ 6.880121] mei_me 0000:00:16.0: H_RST is set = 0x80000015
  1508. [ 9.016756] mei_me 0000:00:16.0: wait hw ready failed
  1509. [ 9.016767] mei_me 0000:00:16.0: hw_start failed ret = -62
  1510. [ 9.016785] mei_me 0000:00:16.0: reset: reached maximal consecutive resets: disabling the device
  1511. [ 9.016787] mei_me 0000:00:16.0: reset failed ret = -19
  1512. [ 9.016790] mei_me 0000:00:16.0: link layer initialization failed.
  1513. [ 9.016792] mei_me 0000:00:16.0: init hw failure.
  1514. [ 9.016858] mei_me 0000:00:16.0: initialization failed.
  1515. [ 9.017917] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops 0xffffffff98ea8a00)
  1516. [ 9.019162] video: exports duplicate symbol acpi_video_get_backlight_type (owned by kernel)
  1517. [ 9.083855] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
  1518. [ 9.083859] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
  1519. [ 9.083862] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
  1520. [ 9.083863] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
  1521. [ 9.083865] snd_hda_codec_realtek hdaudioC0D0: inputs:
  1522. [ 9.083868] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
  1523. [ 9.083870] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19
  1524. [ 9.083872] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
  1525. [ 9.087880] video: exports duplicate symbol acpi_video_get_backlight_type (owned by kernel)
  1526. [ 9.130563] snd_hda_codec_realtek hdaudioC0D0: Failed to find thinkpad-acpi symbol tpacpi_led_set
  1527. [ 9.139376] snd_hda_codec_generic hdaudioC0D3: ignore pin 0x7, too many assigned pins
  1528. [ 9.139384] snd_hda_codec_generic hdaudioC0D3: autoconfig for Generic: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
  1529. [ 9.139388] snd_hda_codec_generic hdaudioC0D3: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
  1530. [ 9.139391] snd_hda_codec_generic hdaudioC0D3: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
  1531. [ 9.139394] snd_hda_codec_generic hdaudioC0D3: mono: mono_out=0x0
  1532. [ 9.139397] snd_hda_codec_generic hdaudioC0D3: dig-out=0x5/0x6
  1533. [ 9.139399] snd_hda_codec_generic hdaudioC0D3: inputs:
  1534. [ 9.141868] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
  1535. [ 9.142012] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
  1536. [ 9.142150] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
  1537. [ 9.142275] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
  1538. [ 9.142404] input: HDA Intel PCH HDMI as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
  1539. [ 9.142534] input: HDA Intel PCH HDMI as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
  1540.  
Powered by spacepaste. Paste removal.