spacepaste

Paste details

reply | raw

  1.  
  2. [ 1501.170]
  3. X.Org X Server 1.19.5
  4. Release Date: 2017-10-12
  5. [ 1501.174] X Protocol Version 11, Revision 0
  6. [ 1501.176] Build Operating System: Linux 4.13.0-21-generic x86_64 Gentoo
  7. [ 1501.177] Current Operating System: Linux laptop3 4.15.15-cknouveau2 #11 SMP Wed May 2 12:45:45 CDT 2018 x86_64
  8. [ 1501.177] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.15-cknouveau2 root=UUID=6a7eced2-fbea-4cdc-ad88-d66948cb7f88 ro resume=/dev/sdb4 drm_kms_helper.edid_firmware=edid/my-edid.bin
  9. [ 1501.180] Build Date: 19 April 2018 06:56:55PM
  10. [ 1501.182]
  11. [ 1501.183] Current version of pixman: 0.34.0
  12. [ 1501.186] Before reporting problems, check http://wiki.x.org
  13. to make sure that you have the latest version.
  14. [ 1501.186] Markers: (--) probed, (**) from config file, (==) default setting,
  15. (++) from command line, (!!) notice, (II) informational,
  16. (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
  17. [ 1501.193] (==) Log file: "/var/log/Xorg.0.log", Time: Wed May 2 13:23:53 2018
  18. [ 1501.195] (==) Using config directory: "/etc/X11/xorg.conf.d"
  19. [ 1501.196] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
  20. [ 1501.196] (==) No Layout section. Using the first Screen section.
  21. [ 1501.196] (==) No screen section available. Using defaults.
  22. [ 1501.196] (**) |-->Screen "Default Screen Section" (0)
  23. [ 1501.196] (**) | |-->Monitor "<default monitor>"
  24. [ 1501.196] (==) No monitor specified for screen "Default Screen Section".
  25. Using a default monitor configuration.
  26. [ 1501.196] (==) Automatically adding devices
  27. [ 1501.196] (==) Automatically enabling devices
  28. [ 1501.196] (==) Automatically adding GPU devices
  29. [ 1501.196] (==) Max clients allowed: 256, resource mask: 0x1fffff
  30. [ 1501.196] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
  31. [ 1501.196] Entry deleted from font path.
  32. [ 1501.196] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
  33. [ 1501.196] Entry deleted from font path.
  34. [ 1501.196] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
  35. [ 1501.196] Entry deleted from font path.
  36. [ 1501.196] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
  37. [ 1501.196] Entry deleted from font path.
  38. [ 1501.196] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
  39. [ 1501.196] (==) FontPath set to:
  40. /usr/share/fonts/misc/,
  41. /usr/share/fonts/100dpi/
  42. [ 1501.196] (==) ModulePath set to "/usr/lib64/xorg/modules"
  43. [ 1501.197] (II) The server relies on udev to provide the list of input devices.
  44. If no devices become available, reconfigure udev or disable AutoAddDevices.
  45. [ 1501.197] (II) Loader magic: 0x55e3e8949d20
  46. [ 1501.197] (II) Module ABI versions:
  47. [ 1501.197] X.Org ANSI C Emulation: 0.4
  48. [ 1501.197] X.Org Video Driver: 23.0
  49. [ 1501.197] X.Org XInput driver : 24.1
  50. [ 1501.197] X.Org Server Extension : 10.0
  51. [ 1501.197] (--) using VT number 4
  53. [ 1501.197] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
  54. [ 1501.197] (II) xfree86: Adding drm device (/dev/dri/card1)
  55. [ 1501.198] (II) xfree86: Adding drm device (/dev/dri/card0)
  56. [ 1501.199] (--) PCI:*(0:0:2:0) 8086:591b:1025:118a rev 4, Mem @ 0xa2000000/16777216, 0xb0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
  57. [ 1501.199] (--) PCI: (0:1:0:0) 10de:1c20:1025:118b rev 161, Mem @ 0xa3000000/16777216, 0x90000000/268435456, 0xa0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
  58. [ 1501.199] (II) LoadModule: "glx"
  59. [ 1501.199] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
  60. [ 1501.200] (II) Module glx: vendor="X.Org Foundation"
  61. [ 1501.200] compiled for 1.19.5, module version = 1.0.0
  62. [ 1501.200] ABI class: X.Org Server Extension, version 10.0
  63. [ 1501.200] (==) Matched intel as autoconfigured driver 0
  64. [ 1501.200] (==) Matched nouveau as autoconfigured driver 1
  65. [ 1501.200] (==) Matched nv as autoconfigured driver 2
  66. [ 1501.200] (==) Matched intel as autoconfigured driver 3
  67. [ 1501.200] (==) Matched modesetting as autoconfigured driver 4
  68. [ 1501.200] (==) Matched fbdev as autoconfigured driver 5
  69. [ 1501.200] (==) Matched vesa as autoconfigured driver 6
  70. [ 1501.200] (==) Assigned the driver to the xf86ConfigLayout
  71. [ 1501.200] (II) LoadModule: "intel"
  72. [ 1501.200] (WW) Warning, couldn't open module intel
  73. [ 1501.200] (II) UnloadModule: "intel"
  74. [ 1501.200] (II) Unloading intel
  75. [ 1501.200] (EE) Failed to load module "intel" (module does not exist, 0)
  76. [ 1501.200] (II) LoadModule: "nouveau"
  77. [ 1501.200] (II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so
  78. [ 1501.200] (II) Module nouveau: vendor="X.Org Foundation"
  79. [ 1501.200] compiled for 1.19.5, module version = 1.0.15
  80. [ 1501.200] Module class: X.Org Video Driver
  81. [ 1501.200] ABI class: X.Org Video Driver, version 23.0
  82. [ 1501.200] (II) LoadModule: "nv"
  83. [ 1501.200] (WW) Warning, couldn't open module nv
  84. [ 1501.200] (II) UnloadModule: "nv"
  85. [ 1501.200] (II) Unloading nv
  86. [ 1501.200] (EE) Failed to load module "nv" (module does not exist, 0)
  87. [ 1501.200] (II) LoadModule: "modesetting"
  88. [ 1501.200] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
  89. [ 1501.200] (II) Module modesetting: vendor="X.Org Foundation"
  90. [ 1501.200] compiled for 1.19.5, module version = 1.19.5
  91. [ 1501.200] Module class: X.Org Video Driver
  92. [ 1501.200] ABI class: X.Org Video Driver, version 23.0
  93. [ 1501.200] (II) LoadModule: "fbdev"
  94. [ 1501.200] (WW) Warning, couldn't open module fbdev
  95. [ 1501.200] (II) UnloadModule: "fbdev"
  96. [ 1501.200] (II) Unloading fbdev
  97. [ 1501.200] (EE) Failed to load module "fbdev" (module does not exist, 0)
  98. [ 1501.200] (II) LoadModule: "vesa"
  99. [ 1501.201] (WW) Warning, couldn't open module vesa
  100. [ 1501.201] (II) UnloadModule: "vesa"
  101. [ 1501.201] (II) Unloading vesa
  102. [ 1501.201] (EE) Failed to load module "vesa" (module does not exist, 0)
  103. [ 1501.201] (II) NOUVEAU driver
  104. [ 1501.201] (II) NOUVEAU driver for NVIDIA chipset families :
  105. [ 1501.201] RIVA TNT (NV04)
  106. [ 1501.201] RIVA TNT2 (NV05)
  107. [ 1501.201] GeForce 256 (NV10)
  108. [ 1501.201] GeForce 2 (NV11, NV15)
  109. [ 1501.201] GeForce 4MX (NV17, NV18)
  110. [ 1501.201] GeForce 3 (NV20)
  111. [ 1501.201] GeForce 4Ti (NV25, NV28)
  112. [ 1501.201] GeForce FX (NV3x)
  113. [ 1501.201] GeForce 6 (NV4x)
  114. [ 1501.201] GeForce 7 (G7x)
  115. [ 1501.201] GeForce 8 (G8x)
  116. [ 1501.201] GeForce GTX 200 (NVA0)
  117. [ 1501.201] GeForce GTX 400 (NVC0)
  118. [ 1501.201] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
  119. [ 1501.215] (II) [drm] nouveau interface version: 1.3.1
  120. [ 1501.215] (II) modeset(0): using drv /dev/dri/card0
  121. [ 1501.216] (II) modeset(0): Creating default Display subsection in Screen section
  122. "Default Screen Section" for depth/fbbpp 24/32
  123. [ 1501.216] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
  124. [ 1501.216] (==) modeset(0): RGB weight 888
  125. [ 1501.216] (==) modeset(0): Default visual is TrueColor
  126. [ 1501.216] (II) Loading sub module "glamoregl"
  127. [ 1501.216] (II) LoadModule: "glamoregl"
  128. [ 1501.216] (II) Loading /usr/lib64/xorg/modules/libglamoregl.so
  129. [ 1501.219] (II) Module glamoregl: vendor="X.Org Foundation"
  130. [ 1501.219] compiled for 1.19.5, module version = 1.0.0
  131. [ 1501.219] ABI class: X.Org ANSI C Emulation, version 0.4
  132. [ 1501.219] (II) glamor: OpenGL accelerated X.org driver based.
  133. [ 1501.256] (II) glamor: EGL version 1.4 (DRI2):
  134. [ 1501.256] EGL_MESA_drm_image required.
  135. [ 1501.256] (EE) modeset(0): glamor initialization failed
  136. [ 1501.256] (II) modeset(0): ShadowFB: preferred YES, enabled YES
  137. [ 1501.256] (II) modeset(0): Double-buffered shadow updates: off
  138. [ 1501.257] (II) modeset(0): Output eDP-1 has no monitor section
  139. [ 1501.258] (II) modeset(0): EDID for output eDP-1
  140. [ 1501.258] (II) modeset(0): Manufacturer: CMN Model: 15d3 Serial#: 0
  141. [ 1501.258] (II) modeset(0): Year: 2015 Week: 26
  142. [ 1501.258] (II) modeset(0): EDID Version: 1.4
  143. [ 1501.258] (II) modeset(0): Digital Display Input
  144. [ 1501.258] (II) modeset(0): 6 bits per channel
  145. [ 1501.258] (II) modeset(0): Digital interface is DisplayPort
  146. [ 1501.258] (II) modeset(0): Max Image Size [cm]: horiz.: 34 vert.: 19
  147. [ 1501.258] (II) modeset(0): Gamma: 2.20
  148. [ 1501.258] (II) modeset(0): No DPMS capabilities specified
  149. [ 1501.258] (II) modeset(0): Supported color encodings: RGB 4:4:4
  150. [ 1501.258] (II) modeset(0): First detailed timing is preferred mode
  151. [ 1501.258] (II) modeset(0): Preferred mode is native pixel format and refresh rate
  152. [ 1501.258] (II) modeset(0): redX: 0.590 redY: 0.350 greenX: 0.330 greenY: 0.555
  153. [ 1501.258] (II) modeset(0): blueX: 0.153 blueY: 0.119 whiteX: 0.313 whiteY: 0.329
  154. [ 1501.258] (II) modeset(0): Manufacturer's mask: 0
  155. [ 1501.258] (II) modeset(0): Supported detailed timing:
  156. [ 1501.258] (II) modeset(0): clock: 152.8 MHz Image Size: 344 x 193 mm
  157. [ 1501.258] (II) modeset(0): h_active: 1920 h_sync: 2000 h_sync_end 2054 h_blank_end 2250 h_border: 0
  158. [ 1501.258] (II) modeset(0): v_active: 1080 v_sync: 1086 v_sync_end 1094 v_blanking: 1132 v_border: 0
  159. [ 1501.258] (II) modeset(0): N156HCE-EAA
  160. [ 1501.258] (II) modeset(0): CMN
  161. [ 1501.258] (II) modeset(0): N156HCE-EAA
  162. [ 1501.258] (II) modeset(0): EDID (in hex):
  163. [ 1501.259] (II) modeset(0): 00ffffffffffff000daed31500000000
  164. [ 1501.259] (II) modeset(0): 1a190104952213780228659759548e27
  165. [ 1501.259] (II) modeset(0): 1e505400000001010101010101010101
  166. [ 1501.259] (II) modeset(0): 010101010101b43b804a713834405036
  167. [ 1501.259] (II) modeset(0): 680058c110000018000000fe004e3135
  168. [ 1501.259] (II) modeset(0): 364843452d4541410a20000000fe0043
  169. [ 1501.259] (II) modeset(0): 4d4e0a202020202020202020000000fe
  170. [ 1501.259] (II) modeset(0): 004e3135364843452d4541410a2000d8
  171. [ 1501.259] (II) modeset(0): Printing probed modes for output eDP-1
  172. [ 1501.259] (II) modeset(0): Modeline "1920x1080"x60.0 152.84 1920 2000 2054 2250 1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
  173. [ 1501.259] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
  174. [ 1501.259] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
  175. [ 1501.259] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
  176. [ 1501.259] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
  177. [ 1501.259] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
  178. [ 1501.259] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
  179. [ 1501.259] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
  180. [ 1501.259] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
  181. [ 1501.259] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
  182. [ 1501.259] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
  183. [ 1501.259] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
  184. [ 1501.259] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
  185. [ 1501.259] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
  186. [ 1501.259] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
  187. [ 1501.259] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
  188. [ 1501.259] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
  189. [ 1501.259] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
  190. [ 1501.259] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
  191. [ 1501.259] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
  192. [ 1501.259] (II) modeset(0): Output eDP-1 connected
  193. [ 1501.259] (II) modeset(0): Using exact sizes for initial modes
  194. [ 1501.259] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
  195. [ 1501.259] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
  196. [ 1501.259] (==) modeset(0): DPI set to (96, 96)
  197. [ 1501.259] (II) Loading sub module "fb"
  198. [ 1501.259] (II) LoadModule: "fb"
  199. [ 1501.259] (II) Loading /usr/lib64/xorg/modules/libfb.so
  200. [ 1501.259] (II) Module fb: vendor="X.Org Foundation"
  201. [ 1501.259] compiled for 1.19.5, module version = 1.0.0
  202. [ 1501.259] ABI class: X.Org ANSI C Emulation, version 0.4
  203. [ 1501.259] (II) Loading sub module "shadow"
  204. [ 1501.259] (II) LoadModule: "shadow"
  205. [ 1501.259] (II) Loading /usr/lib64/xorg/modules/libshadow.so
  206. [ 1501.260] (II) Module shadow: vendor="X.Org Foundation"
  207. [ 1501.260] compiled for 1.19.5, module version = 1.1.0
  208. [ 1501.260] ABI class: X.Org ANSI C Emulation, version 0.4
  209. [ 1501.260] (II) Loading sub module "dri2"
  210. [ 1501.260] (II) LoadModule: "dri2"
  211. [ 1501.260] (II) Module "dri2" already built-in
  212. [ 1501.260] (--) NOUVEAU(G0): Chipset: "NVIDIA NV136"
  213. [ 1501.260] (==) NOUVEAU(G0): Depth 24, (--) framebuffer bpp 32
  214. [ 1501.260] (==) NOUVEAU(G0): RGB weight 888
  215. [ 1501.260] (==) NOUVEAU(G0): Default visual is TrueColor
  216. [ 1501.260] (==) NOUVEAU(G0): Using HW cursor
  217. [ 1501.260] (==) NOUVEAU(G0): Allowed maximum DRI level 2.
  218. [ 1501.260] (==) NOUVEAU(G0): GLX sync to VBlank enabled.
  219. [ 1501.260] (==) NOUVEAU(G0): Page flipping enabled
  220. [ 1501.260] (==) NOUVEAU(G0): Swap limit set to 1 [Max allowed 2]
  221. [ 1501.260] (==) NOUVEAU(G0): Page flipping synced to vblank by kernel.
  222. [ 1501.260] (II) NOUVEAU(G0): Initializing outputs ...
  223. [ 1501.261] (II) NOUVEAU(G0): Output HDMI-1-1 has no monitor section
  224. [ 1501.261] (II) NOUVEAU(G0): 1 crtcs needed for screen.
  225. [ 1501.261] (II) NOUVEAU(G0): Allocated crtc nr. 0 to this screen.
  226. [ 1501.261] (II) NOUVEAU(G0): Allocated crtc nr. 1 to this screen.
  227. [ 1501.261] (II) NOUVEAU(G0): Allocated crtc nr. 2 to this screen.
  228. [ 1501.261] (II) NOUVEAU(G0): Allocated crtc nr. 3 to this screen.
  229. [ 1501.263] (II) NOUVEAU(G0): EDID for output HDMI-1-1
  230. [ 1501.263] (==) NOUVEAU(G0): Using gamma correction (1.0, 1.0, 1.0)
  231. [ 1501.263] (--) NOUVEAU(G0): Virtual size is 1024x768 (pitch 0)
  232. [ 1501.263] (**) NOUVEAU(G0): Mode "1920x1080": 173.0 MHz (scaled from 0.0 MHz), 67.2 kHz, 60.0 Hz
  233. [ 1501.263] (II) NOUVEAU(G0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz)
  234. [ 1501.263] (==) NOUVEAU(G0): DPI set to (96, 96)
  235. [ 1501.263] (II) Loading sub module "fb"
  236. [ 1501.263] (II) LoadModule: "fb"
  237. [ 1501.263] (II) Loading /usr/lib64/xorg/modules/libfb.so
  238. [ 1501.263] (II) Module fb: vendor="X.Org Foundation"
  239. [ 1501.263] compiled for 1.19.5, module version = 1.0.0
  240. [ 1501.263] ABI class: X.Org ANSI C Emulation, version 0.4
  241. [ 1501.263] (II) Loading sub module "shadowfb"
  242. [ 1501.263] (II) LoadModule: "shadowfb"
  243. [ 1501.263] (II) Loading /usr/lib64/xorg/modules/libshadowfb.so
  244. [ 1501.263] (II) Module shadowfb: vendor="X.Org Foundation"
  245. [ 1501.263] compiled for 1.19.5, module version = 1.0.0
  246. [ 1501.263] ABI class: X.Org ANSI C Emulation, version 0.4
  247. [ 1501.263] (==) Depth 24 pixmap format is 32 bpp
  248. [ 1501.264] (II) NOUVEAU(G0): Channel setup complete.
  249. [ 1501.264] (II) NOUVEAU(G0): [COPY] async initialised.
  250. [ 1501.264] (II) NOUVEAU(G0): Hardware support for Present enabled
  251. [ 1501.264] (II) NOUVEAU(G0): [DRI2] Setup complete
  252. [ 1501.264] (II) NOUVEAU(G0): [DRI2] DRI driver: nouveau
  253. [ 1501.264] (II) NOUVEAU(G0): [DRI2] VDPAU driver: nouveau
  254. [ 1501.264] (II) Loading sub module "exa"
  255. [ 1501.264] (II) LoadModule: "exa"
  256. [ 1501.264] (II) Loading /usr/lib64/xorg/modules/libexa.so
  257. [ 1501.264] (II) Module exa: vendor="X.Org Foundation"
  258. [ 1501.264] compiled for 1.19.5, module version = 2.6.0
  259. [ 1501.264] ABI class: X.Org Video Driver, version 23.0
  260. [ 1501.264] (II) EXA(256): Driver allocated offscreen pixmaps
  261. [ 1501.264] (II) EXA(256): Driver registered support for the following operations:
  262. [ 1501.264] (II) Solid
  263. [ 1501.264] (II) Copy
  264. [ 1501.264] (II) Composite (RENDER acceleration)
  265. [ 1501.264] (II) UploadToScreen
  266. [ 1501.264] (II) DownloadFromScreen
  267. [ 1501.264] (==) NOUVEAU(G0): Backing store enabled
  268. [ 1501.264] (==) NOUVEAU(G0): Silken mouse enabled
  269. [ 1501.264] (II) NOUVEAU(G0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
  270. [ 1501.264] (II) NOUVEAU(G0): [XvMC] Extension initialized.
  271. [ 1501.264] (==) NOUVEAU(G0): DPMS enabled
  272. [ 1501.264] (II) NOUVEAU(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
  273. [ 1501.264] (==) modeset(0): Backing store enabled
  274. [ 1501.264] (==) modeset(0): Silken mouse enabled
  275. [ 1501.265] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
  276. [ 1501.329] (==) modeset(0): DPMS enabled
  277. [ 1501.329] (--) RandR disabled
  278. [ 1501.329] (II) AIGLX: Screen 0 is not DRI2 capable
  279. [ 1501.329] (EE) AIGLX: reverting to software rendering
  280. [ 1501.331] (II) IGLX: enabled GLX_MESA_copy_sub_buffer
  281. [ 1501.331] (II) IGLX: Loaded and initialized swrast
  282. [ 1501.331] (II) GLX: Initialized DRISWRAST GL provider for screen 0
  283. [ 1501.332] (II) NOUVEAU(G0): NVEnterVT is called.
  284. [ 1501.332] (II) modeset(0): Damage tracking initialized
  285. [ 1501.332] (II) modeset(0): Setting screen physical size to 508 x 285
  286. [ 1501.357] (II) config/udev: Adding input device Power Button (/dev/input/event3)
  287. [ 1501.357] (**) Power Button: Applying InputClass "libinput keyboard catchall"
  288. [ 1501.357] (**) Power Button: Applying InputClass "libinput keyboard catchall"
  289. [ 1501.357] (II) LoadModule: "libinput"
  290. [ 1501.357] (II) Loading /usr/lib64/xorg/modules/input/libinput_drv.so
  291. [ 1501.358] (II) Module libinput: vendor="X.Org Foundation"
  292. [ 1501.358] compiled for 1.19.5, module version = 0.25.1
  293. [ 1501.358] Module class: X.Org XInput Driver
  294. [ 1501.358] ABI class: X.Org XInput driver, version 24.1
  295. [ 1501.358] (II) Using input driver 'libinput' for 'Power Button'
  296. [ 1501.358] (**) Power Button: always reports core events
  297. [ 1501.358] (**) Option "Device" "/dev/input/event3"
  298. [ 1501.358] (**) Option "_source" "server/udev"
  299. [ 1501.359] (II) event3 - Power Button: is tagged by udev as: Keyboard
  300. [ 1501.359] (II) event3 - Power Button: device is a keyboard
  301. [ 1501.359] (II) event3 - Power Button: device removed
  302. [ 1501.380] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
  303. [ 1501.380] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
  304. [ 1501.381] (II) event3 - Power Button: is tagged by udev as: Keyboard
  305. [ 1501.381] (II) event3 - Power Button: device is a keyboard
  306. [ 1501.381] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
  307. [ 1501.381] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
  308. [ 1501.381] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
  309. [ 1501.381] (II) Using input driver 'libinput' for 'Video Bus'
  310. [ 1501.381] (**) Video Bus: always reports core events
  311. [ 1501.381] (**) Option "Device" "/dev/input/event8"
  312. [ 1501.381] (**) Option "_source" "server/udev"
  313. [ 1501.381] (II) event8 - Video Bus: is tagged by udev as: Keyboard
  314. [ 1501.381] (II) event8 - Video Bus: device is a keyboard
  315. [ 1501.381] (II) event8 - Video Bus: device removed
  316. [ 1501.460] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8/event8"
  317. [ 1501.460] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
  318. [ 1501.461] (II) event8 - Video Bus: is tagged by udev as: Keyboard
  319. [ 1501.461] (II) event8 - Video Bus: device is a keyboard
  320. [ 1501.461] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
  321. [ 1501.461] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
  322. [ 1501.461] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
  323. [ 1501.461] (II) Using input driver 'libinput' for 'Video Bus'
  324. [ 1501.461] (**) Video Bus: always reports core events
  325. [ 1501.461] (**) Option "Device" "/dev/input/event7"
  326. [ 1501.461] (**) Option "_source" "server/udev"
  327. [ 1501.461] (II) event7 - Video Bus: is tagged by udev as: Keyboard
  328. [ 1501.461] (II) event7 - Video Bus: device is a keyboard
  329. [ 1501.461] (II) event7 - Video Bus: device removed
  330. [ 1501.540] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input7/event7"
  331. [ 1501.540] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
  332. [ 1501.541] (II) event7 - Video Bus: is tagged by udev as: Keyboard
  333. [ 1501.541] (II) event7 - Video Bus: device is a keyboard
  334. [ 1501.541] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
  335. [ 1501.541] (II) No input driver specified, ignoring this device.
  336. [ 1501.541] (II) This device may have been added with another device file.
  337. [ 1501.541] (II) config/udev: Adding input device Power Button (/dev/input/event2)
  338. [ 1501.541] (**) Power Button: Applying InputClass "libinput keyboard catchall"
  339. [ 1501.541] (**) Power Button: Applying InputClass "libinput keyboard catchall"
  340. [ 1501.541] (II) Using input driver 'libinput' for 'Power Button'
  341. [ 1501.541] (**) Power Button: always reports core events
  342. [ 1501.541] (**) Option "Device" "/dev/input/event2"
  343. [ 1501.541] (**) Option "_source" "server/udev"
  344. [ 1501.541] (II) event2 - Power Button: is tagged by udev as: Keyboard
  345. [ 1501.541] (II) event2 - Power Button: device is a keyboard
  346. [ 1501.541] (II) event2 - Power Button: device removed
  347. [ 1501.580] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
  348. [ 1501.580] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
  349. [ 1501.580] (II) event2 - Power Button: is tagged by udev as: Keyboard
  350. [ 1501.580] (II) event2 - Power Button: device is a keyboard
  351. [ 1501.581] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
  352. [ 1501.581] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
  353. [ 1501.581] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
  354. [ 1501.581] (II) Using input driver 'libinput' for 'Sleep Button'
  355. [ 1501.581] (**) Sleep Button: always reports core events
  356. [ 1501.581] (**) Option "Device" "/dev/input/event1"
  357. [ 1501.581] (**) Option "_source" "server/udev"
  358. [ 1501.581] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
  359. [ 1501.581] (II) event1 - Sleep Button: device is a keyboard
  360. [ 1501.581] (II) event1 - Sleep Button: device removed
  361. [ 1501.620] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
  362. [ 1501.620] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
  363. [ 1501.621] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
  364. [ 1501.621] (II) event1 - Sleep Button: device is a keyboard
  365. [ 1501.621] (II) config/udev: Adding input device Logitech M510 (/dev/input/event6)
  366. [ 1501.621] (**) Logitech M510: Applying InputClass "libinput pointer catchall"
  367. [ 1501.621] (**) Logitech M510: Applying InputClass "libinput pointer catchall"
  368. [ 1501.621] (II) Using input driver 'libinput' for 'Logitech M510'
  369. [ 1501.621] (**) Logitech M510: always reports core events
  370. [ 1501.621] (**) Option "Device" "/dev/input/event6"
  371. [ 1501.621] (**) Option "_source" "server/udev"
  372. [ 1501.622] (II) event6 - Logitech M510: is tagged by udev as: Mouse
  373. [ 1501.622] (II) event6 - Logitech M510: device is a pointer
  374. [ 1501.622] (II) event6 - Logitech M510: device removed
  375. [ 1501.680] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.2/0003:046D:C52B.0007/0003:046D:4051.0008/input/input11/event6"
  376. [ 1501.680] (II) XINPUT: Adding extended input device "Logitech M510" (type: MOUSE, id 11)
  377. [ 1501.680] (**) Option "AccelerationScheme" "none"
  378. [ 1501.680] (**) Logitech M510: (accel) selected scheme none/0
  379. [ 1501.680] (**) Logitech M510: (accel) acceleration factor: 2.000
  380. [ 1501.680] (**) Logitech M510: (accel) acceleration threshold: 4
  381. [ 1501.681] (II) event6 - Logitech M510: is tagged by udev as: Mouse
  382. [ 1501.681] (II) event6 - Logitech M510: device is a pointer
  383. [ 1501.681] (II) config/udev: Adding input device Logitech M510 (/dev/input/mouse0)
  384. [ 1501.681] (II) No input driver specified, ignoring this device.
  385. [ 1501.681] (II) This device may have been added with another device file.
  386. [ 1501.681] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event10)
  387. [ 1501.681] (II) No input driver specified, ignoring this device.
  388. [ 1501.681] (II) This device may have been added with another device file.
  389. [ 1501.682] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
  390. [ 1501.682] (II) No input driver specified, ignoring this device.
  391. [ 1501.682] (II) This device may have been added with another device file.
  392. [ 1501.682] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
  393. [ 1501.682] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
  394. [ 1501.682] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
  395. [ 1501.682] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
  396. [ 1501.682] (**) AT Translated Set 2 keyboard: always reports core events
  397. [ 1501.682] (**) Option "Device" "/dev/input/event4"
  398. [ 1501.682] (**) Option "_source" "server/udev"
  399. [ 1501.682] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
  400. [ 1501.682] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
  401. [ 1501.682] (II) event4 - AT Translated Set 2 keyboard: device removed
  402. [ 1501.710] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
  403. [ 1501.710] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
  404. [ 1501.710] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
  405. [ 1501.710] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
  406. [ 1501.711] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
  407. [ 1501.711] (II) No input driver specified, ignoring this device.
  408. [ 1501.711] (II) This device may have been added with another device file.
  409.  
Powered by spacepaste. Paste removal.