spacepaste

  1.  
  2. # dmesg
  3. [ 0.000000] Linux version 4.9.16-gentoo (root@evgenijTrapecija) (gcc version 5.4.0 (Gentoo 5.4.0-r3 p1.3, pie-0.6.5) ) #1 SMP Thu May 18 13:15:35 EEST 2017
  4. [ 0.000000] Command line: BOOT_IMAGE=/kernel-genkernel-x86_64-4.9.16-gentoo root=/dev/cciss/c0d0p4 ro acpi=off
  5. [ 0.000000] x86/fpu: Legacy x87 FPU detected.
  6. [ 0.000000] x86/fpu: Using 'eager' FPU context switches.
  7. [ 0.000000] e820: BIOS-provided physical RAM map:
  8. [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
  9. [ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
  10. [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
  11. [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfe55fff] usable
  12. [ 0.000000] BIOS-e820: [mem 0x00000000bfe56000-0x00000000bfe5dfff] ACPI data
  13. [ 0.000000] BIOS-e820: [mem 0x00000000bfe5e000-0x00000000bfe5efff] usable
  14. [ 0.000000] BIOS-e820: [mem 0x00000000bfe5f000-0x00000000bfffffff] reserved
  15. [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
  16. [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fecfffff] reserved
  17. [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee0ffff] reserved
  18. [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
  19. [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fffefff] usable
  20. [ 0.000000] NX (Execute Disable) protection: active
  21. [ 0.000000] SMBIOS 2.4 present.
  22. [ 0.000000] DMI: HP ProLiant DL380 G5, BIOS P56 01/24/2008
  23. [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
  24. [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
  25. [ 0.000000] e820: last_pfn = 0x23ffff max_arch_pfn = 0x400000000
  26. [ 0.000000] MTRR default type: uncachable
  27. [ 0.000000] MTRR fixed ranges enabled:
  28. [ 0.000000] 00000-9FFFF write-back
  29. [ 0.000000] A0000-BFFFF uncachable
  30. [ 0.000000] C0000-FFFFF write-protect
  31. [ 0.000000] MTRR variable ranges enabled:
  32. [ 0.000000] 0 base 0080000000 mask 0FC0000000 write-back
  33. [ 0.000000] 1 base 0000000000 mask 0F80000000 write-back
  34. [ 0.000000] 2 base 0100000000 mask 0F00000000 write-back
  35. [ 0.000000] 3 base 0200000000 mask 0E00000000 write-back
  36. [ 0.000000] 4 base 0400000000 mask 0C00000000 write-back
  37. [ 0.000000] 5 disabled
  38. [ 0.000000] 6 disabled
  39. [ 0.000000] 7 disabled
  40. [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
  41. [ 0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
  42. [ 0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
  43. [ 0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
  44. [ 0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
  45. [ 0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
  46. [ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
  47. [ 0.000000] e820: last_pfn = 0xbfe5f max_arch_pfn = 0x400000000
  48. [ 0.000000] found SMP MP-table at [mem 0x000f4f80-0x000f4f8f] mapped at [ffff8800000f4f80]
  49. [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
  50. [ 0.000000] BRK [0x02022000, 0x02022fff] PGTABLE
  51. [ 0.000000] BRK [0x02023000, 0x02023fff] PGTABLE
  52. [ 0.000000] BRK [0x02024000, 0x02024fff] PGTABLE
  53. [ 0.000000] BRK [0x02025000, 0x02025fff] PGTABLE
  54. [ 0.000000] BRK [0x02026000, 0x02026fff] PGTABLE
  55. [ 0.000000] BRK [0x02027000, 0x02027fff] PGTABLE
  56. [ 0.000000] RAMDISK: [mem 0x33f21000-0x35f87fff]
  57. [ 0.000000] Zone ranges:
  58. [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
  59. [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
  60. [ 0.000000] Normal [mem 0x0000000100000000-0x000000023fffefff]
  61. [ 0.000000] Movable zone start for each node
  62. [ 0.000000] Early memory node ranges
  63. [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
  64. [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bfe55fff]
  65. [ 0.000000] node 0: [mem 0x00000000bfe5e000-0x00000000bfe5efff]
  66. [ 0.000000] node 0: [mem 0x0000000100000000-0x000000023fffefff]
  67. [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023fffefff]
  68. [ 0.000000] On node 0 totalpages: 2096628
  69. [ 0.000000] DMA zone: 64 pages used for memmap
  70. [ 0.000000] DMA zone: 21 pages reserved
  71. [ 0.000000] DMA zone: 3998 pages, LIFO batch:0
  72. [ 0.000000] DMA32 zone: 12218 pages used for memmap
  73. [ 0.000000] DMA32 zone: 781911 pages, LIFO batch:31
  74. [ 0.000000] Normal zone: 20480 pages used for memmap
  75. [ 0.000000] Normal zone: 1310719 pages, LIFO batch:31
  76. [ 0.000000] Intel MultiProcessor Specification v1.4
  77. [ 0.000000] MPTABLE: OEM ID: HP
  78. [ 0.000000] MPTABLE: Product ID: PROLIANT
  79. [ 0.000000] MPTABLE: APIC at: 0xFEE00000
  80. [ 0.000000] Processor #0 (Bootup-CPU)
  81. [ 0.000000] Processor #1
  82. [ 0.000000] Processor #6
  83. [ 0.000000] Processor #7
  84. [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
  85. [ 0.000000] Processors: 4
  86. [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
  87. [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
  88. [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
  89. [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
  90. [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
  91. [ 0.000000] PM: Registered nosave memory: [mem 0xbfe56000-0xbfe5dfff]
  92. [ 0.000000] PM: Registered nosave memory: [mem 0xbfe5f000-0xbfffffff]
  93. [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
  94. [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
  95. [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
  96. [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfecfffff]
  97. [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfedfffff]
  98. [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee0ffff]
  99. [ 0.000000] PM: Registered nosave memory: [mem 0xfee10000-0xffbfffff]
  100. [ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
  101. [ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
  102. [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
  103. [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
  104. [ 0.000000] percpu: Embedded 34 pages/cpu @ffff88023fa00000 s101528 r8192 d29544 u524288
  105. [ 0.000000] pcpu-alloc: s101528 r8192 d29544 u524288 alloc=1*2097152
  106. [ 0.000000] pcpu-alloc: [0] 0 1 2 3
  107. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2063845
  108. [ 0.000000] Kernel command line: BOOT_IMAGE=/kernel-genkernel-x86_64-4.9.16-gentoo root=/dev/cciss/c0d0p4 ro acpi=off
  109. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  110. [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
  111. [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
  112. [ 0.000000] Memory: 8126764K/8386512K available (6277K kernel code, 1217K rwdata, 2908K rodata, 1380K init, 1592K bss, 259748K reserved, 0K cma-reserved)
  113. [ 0.000000] Hierarchical RCU implementation.
  114. [ 0.000000] Build-time adjustment of leaf fanout to 64.
  115. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
  116. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
  117. [ 0.000000] NR_IRQS:524544 nr_irqs:456 16
  118. [ 0.000000] Console: colour VGA+ 80x25
  119. [ 0.000000] console [tty0] enabled
  120. [ 0.000000] tsc: Fast TSC calibration using PIT
  121. [ 0.000000] tsc: Detected 1600.032 MHz processor
  122. [ 0.002015] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.06 BogoMIPS (lpj=1600032)
  123. [ 0.002254] pid_max: default: 32768 minimum: 301
  124. [ 0.002481] Security Framework initialized
  125. [ 0.002601] SELinux: Initializing.
  126. [ 0.003034] SELinux: Starting in permissive mode
  127. [ 0.003065] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
  128. [ 0.003187] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
  129. [ 0.004089] CPU: Physical Processor ID: 0
  130. [ 0.004208] CPU: Processor Core ID: 0
  131. [ 0.004325] mce: CPU supports 6 MCE banks
  132. [ 0.004450] CPU0: Thermal monitoring enabled (TM2)
  133. [ 0.004572] process: using mwait in idle threads
  134. [ 0.004694] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
  135. [ 0.004813] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
  136. [ 0.005446] Freeing SMP alternatives memory: 28K (ffffffff81e8b000 - ffffffff81e92000)
  137. [ 0.005644] ftrace: allocating 25391 entries in 100 pages
  138. [ 0.015194] smpboot: Max logical packages: 2
  139. [ 0.015388] ExtINT not setup in hardware but reported by MP table
  140. [ 0.016353] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
  141. [ 0.128016] smpboot: CPU0: Intel(R) Xeon(R) CPU 5110 @ 1.60GHz (family: 0x6, model: 0xf, stepping: 0xb)
  142. [ 0.128332] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Broken BIOS detected, complain to your hardware vendor.
  143. [ 0.128692] [Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 186 is 43003c)
  144. [ 0.128888] Intel PMU driver.
  145. [ 0.129000] core: PEBS disabled due to CPU errata
  146. [ 0.129004] ... version: 2
  147. [ 0.129121] ... bit width: 40
  148. [ 0.129238] ... generic registers: 2
  149. [ 0.129354] ... value mask: 000000ffffffffff
  150. [ 0.129473] ... max period: 000000007fffffff
  151. [ 0.129591] ... fixed-purpose events: 3
  152. [ 0.129707] ... event mask: 0000000700000003
  153. [ 0.131190] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
  154. [ 0.131653] x86: Booting SMP configuration:
  155. [ 0.131772] .... node #0, CPUs: #1 #2
  156. [ 0.003000] smpboot: CPU 2 Converting physical 3 to logical package 1
  157. [ 0.255219] #3
  158. [ 0.317133] x86: Booted up 1 node, 4 CPUs
  159. [ 0.317133] smpboot: Total of 4 processors activated (12798.76 BogoMIPS)
  160. [ 0.319159] devtmpfs: initialized
  161. [ 0.319252] x86/mm: Memory block size: 128MB
  162. [ 0.325144] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
  163. [ 0.325348] futex hash table entries: 1024 (order: 4, 65536 bytes)
  164. [ 0.326040] NET: Registered protocol family 16
  165. [ 0.329007] cpuidle: using governor menu
  166. [ 0.329264] PCI: Using configuration type 1 for base access
  167. [ 0.329388] PCI: HP ProLiant DL380 detected, enabling pci=bfsort.
  168. [ 0.335068] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  169. [ 0.335177] ACPI: Interpreter disabled.
  170. [ 0.335211] vgaarb: loaded
  171. [ 0.336117] SCSI subsystem initialized
  172. [ 0.336253] libata version 3.00 loaded.
  173. [ 0.336253] usbcore: registered new interface driver usbfs
  174. [ 0.336253] usbcore: registered new interface driver hub
  175. [ 0.336357] usbcore: registered new device driver usb
  176. [ 0.336525] PCI: Probing PCI hardware
  177. [ 0.337005] PCI: root bus 00: using default resources
  178. [ 0.337007] PCI: Probing PCI hardware (bus 00)
  179. [ 0.337057] PCI host bridge to bus 0000:00
  180. [ 0.337180] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
  181. [ 0.337302] pci_bus 0000:00: root bus resource [mem 0x00000000-0x3fffffffff]
  182. [ 0.337424] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  183. [ 0.337636] pci 0000:00:00.0: [8086:25d8] type 00 class 0x060000
  184. [ 0.337698] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
  185. [ 0.337788] pci 0000:00:02.0: [8086:25e2] type 01 class 0x060400
  186. [ 0.337840] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
  187. [ 0.337921] pci 0000:00:03.0: [8086:25e3] type 01 class 0x060400
  188. [ 0.338031] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
  189. [ 0.338111] pci 0000:00:04.0: [8086:25f8] type 01 class 0x060400
  190. [ 0.338162] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
  191. [ 0.338242] pci 0000:00:05.0: [8086:25e5] type 01 class 0x060400
  192. [ 0.338293] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
  193. [ 0.338374] pci 0000:00:06.0: [8086:25f9] type 01 class 0x060400
  194. [ 0.338425] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
  195. [ 0.338505] pci 0000:00:07.0: [8086:25e7] type 01 class 0x060400
  196. [ 0.338556] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
  197. [ 0.338640] pci 0000:00:10.0: [8086:25f0] type 00 class 0x060000
  198. [ 0.338728] pci 0000:00:10.1: [8086:25f0] type 00 class 0x060000
  199. [ 0.338814] pci 0000:00:10.2: [8086:25f0] type 00 class 0x060000
  200. [ 0.338906] pci 0000:00:11.0: [8086:25f1] type 00 class 0x060000
  201. [ 0.338995] pci 0000:00:13.0: [8086:25f3] type 00 class 0x060000
  202. [ 0.339089] pci 0000:00:15.0: [8086:25f5] type 00 class 0x060000
  203. [ 0.339175] pci 0000:00:16.0: [8086:25f6] type 00 class 0x060000
  204. [ 0.339278] pci 0000:00:1c.0: [8086:2690] type 01 class 0x060400
  205. [ 0.339354] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
  206. [ 0.339438] pci 0000:00:1c.1: [8086:2692] type 01 class 0x060400
  207. [ 0.339514] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
  208. [ 0.339604] pci 0000:00:1d.0: [8086:2688] type 00 class 0x0c0300
  209. [ 0.339660] pci 0000:00:1d.0: reg 0x20: [io 0x1000-0x101f]
  210. [ 0.339754] pci 0000:00:1d.1: [8086:2689] type 00 class 0x0c0300
  211. [ 0.339810] pci 0000:00:1d.1: reg 0x20: [io 0x1020-0x103f]
  212. [ 0.339902] pci 0000:00:1d.2: [8086:268a] type 00 class 0x0c0300
  213. [ 0.339957] pci 0000:00:1d.2: reg 0x20: [io 0x1040-0x105f]
  214. [ 0.340057] pci 0000:00:1d.3: [8086:268b] type 00 class 0x0c0300
  215. [ 0.340114] pci 0000:00:1d.3: reg 0x20: [io 0x1060-0x107f]
  216. [ 0.340216] pci 0000:00:1d.7: [8086:268c] type 00 class 0x0c0320
  217. [ 0.340236] pci 0000:00:1d.7: reg 0x10: [mem 0xf3df0000-0xf3df03ff]
  218. [ 0.340329] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
  219. [ 0.340411] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
  220. [ 0.340529] pci 0000:00:1f.0: [8086:2670] type 00 class 0x060100
  221. [ 0.340621] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
  222. [ 0.340699] pci 0000:00:1f.1: [8086:269e] type 00 class 0x01018a
  223. [ 0.340714] pci 0000:00:1f.1: reg 0x10: [io 0x01f0-0x01f7]
  224. [ 0.340725] pci 0000:00:1f.1: reg 0x14: [io 0x03f4-0x03f7]
  225. [ 0.340736] pci 0000:00:1f.1: reg 0x18: [io 0x0170-0x0177]
  226. [ 0.340746] pci 0000:00:1f.1: reg 0x1c: [io 0x0374-0x0377]
  227. [ 0.340757] pci 0000:00:1f.1: reg 0x20: [io 0x0500-0x050f]
  228. [ 0.340780] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
  229. [ 0.340903] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
  230. [ 0.341004] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
  231. [ 0.341125] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
  232. [ 0.341372] pci 0000:09:00.0: [8086:3500] type 01 class 0x060400
  233. [ 0.341441] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
  234. [ 0.341528] pci 0000:09:00.3: [8086:350c] type 01 class 0x060400
  235. [ 0.341598] pci 0000:09:00.3: PME# supported from D0 D3hot D3cold
  236. [ 0.341677] pci 0000:09:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
  237. [ 0.341884] pci 0000:00:02.0: PCI bridge to [bus 09-12]
  238. [ 0.342005] pci 0000:00:02.0: bridge window [io 0x5000-0x6fff]
  239. [ 0.342009] pci 0000:00:02.0: bridge window [mem 0xf9d00000-0xf9ffffff]
  240. [ 0.342078] pci 0000:0a:00.0: [8086:3510] type 01 class 0x060400
  241. [ 0.342154] pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold
  242. [ 0.342230] pci 0000:0a:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
  243. [ 0.342441] pci 0000:0a:01.0: [8086:3514] type 01 class 0x060400
  244. [ 0.342517] pci 0000:0a:01.0: PME# supported from D0 D3hot D3cold
  245. [ 0.342592] pci 0000:0a:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
  246. [ 0.342806] pci 0000:0a:02.0: [8086:3518] type 01 class 0x060400
  247. [ 0.342882] pci 0000:0a:02.0: PME# supported from D0 D3hot D3cold
  248. [ 0.342958] pci 0000:0a:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
  249. [ 0.343036] pci 0000:09:00.0: PCI bridge to [bus 0a-11]
  250. [ 0.343157] pci 0000:09:00.0: bridge window [io 0x5000-0x6fff]
  251. [ 0.343162] pci 0000:09:00.0: bridge window [mem 0xf9e00000-0xf9ffffff]
  252. [ 0.343249] pci 0000:0b:00.0: [8086:10b9] type 00 class 0x020000
  253. [ 0.343274] pci 0000:0b:00.0: reg 0x10: [mem 0xf9ee0000-0xf9efffff]
  254. [ 0.343292] pci 0000:0b:00.0: reg 0x14: [mem 0xf9ec0000-0xf9edffff]
  255. [ 0.343311] pci 0000:0b:00.0: reg 0x18: [io 0x5000-0x501f]
  256. [ 0.343378] pci 0000:0b:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
  257. [ 0.343460] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold
  258. [ 0.343545] pci 0000:0b:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
  259. [ 0.343755] pci 0000:0a:00.0: PCI bridge to [bus 0b-0d]
  260. [ 0.344006] pci 0000:0a:00.0: bridge window [io 0x5000-0x5fff]
  261. [ 0.344010] pci 0000:0a:00.0: bridge window [mem 0xf9e00000-0xf9efffff]
  262. [ 0.344086] pci 0000:0e:00.0: [1166:0103] type 01 class 0x060400
  263. [ 0.344167] pci 0000:0e:00.0: PME# supported from D0 D3hot D3cold
  264. [ 0.344243] pci 0000:0e:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
  265. [ 0.344450] pci 0000:0a:01.0: PCI bridge to [bus 0e-10]
  266. [ 0.344571] pci 0000:0a:01.0: bridge window [io 0x6000-0x6fff]
  267. [ 0.344575] pci 0000:0a:01.0: bridge window [mem 0xf9f00000-0xf9ffffff]
  268. [ 0.344653] pci 0000:0f:04.0: [1166:0104] type 01 class 0x060400
  269. [ 0.344796] pci 0000:0f:08.0: [103c:3238] type 00 class 0x010400
  270. [ 0.344826] pci 0000:0f:08.0: reg 0x10: [mem 0xf9f80000-0xf9ffffff 64bit]
  271. [ 0.344838] pci 0000:0f:08.0: reg 0x18: [io 0x6000-0x60ff]
  272. [ 0.344850] pci 0000:0f:08.0: reg 0x1c: [mem 0xf9f70000-0xf9f77fff]
  273. [ 0.344881] pci 0000:0f:08.0: reg 0x30: [mem 0x00000000-0x00003fff pref]
  274. [ 0.344929] pci 0000:0f:08.0: supports D1
  275. [ 0.345093] pci 0000:0e:00.0: PCI bridge to [bus 0f-10]
  276. [ 0.345218] pci 0000:0e:00.0: bridge window [io 0x6000-0x6fff]
  277. [ 0.345223] pci 0000:0e:00.0: bridge window [mem 0xf9f00000-0xf9ffffff]
  278. [ 0.345336] pci 0000:0f:04.0: PCI bridge to [bus 10]
  279. [ 0.345544] pci 0000:0a:02.0: PCI bridge to [bus 11]
  280. [ 0.345779] pci 0000:09:00.3: PCI bridge to [bus 12]
  281. [ 0.345985] pci 0000:06:00.0: [8086:10b9] type 00 class 0x020000
  282. [ 0.346012] pci 0000:06:00.0: reg 0x10: [mem 0xf9ce0000-0xf9cfffff]
  283. [ 0.346030] pci 0000:06:00.0: reg 0x14: [mem 0xf9cc0000-0xf9cdffff]
  284. [ 0.346047] pci 0000:06:00.0: reg 0x18: [io 0x4000-0x401f]
  285. [ 0.346108] pci 0000:06:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
  286. [ 0.346183] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
  287. [ 0.346265] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
  288. [ 0.346474] pci 0000:00:03.0: PCI bridge to [bus 06-08]
  289. [ 0.346595] pci 0000:00:03.0: bridge window [io 0x4000-0x4fff]
  290. [ 0.346599] pci 0000:00:03.0: bridge window [mem 0xf9c00000-0xf9cfffff]
  291. [ 0.346653] pci 0000:00:04.0: PCI bridge to [bus 13-15]
  292. [ 0.346827] pci 0000:00:05.0: PCI bridge to [bus 16]
  293. [ 0.347018] pci 0000:17:00.0: [10de:0402] type 00 class 0x030000
  294. [ 0.347031] pci 0000:17:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
  295. [ 0.347044] pci 0000:17:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
  296. [ 0.347058] pci 0000:17:00.0: reg 0x1c: [mem 0xfa000000-0xfbffffff 64bit]
  297. [ 0.347067] pci 0000:17:00.0: reg 0x24: [io 0x7000-0x707f]
  298. [ 0.347077] pci 0000:17:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
  299. [ 0.347167] vgaarb: setting as boot device: PCI:0000:17:00.0
  300. [ 0.347288] vgaarb: device added: PCI:0000:17:00.0,decodes=io+mem,owns=io+mem,locks=none
  301. [ 0.350015] pci 0000:00:06.0: PCI bridge to [bus 17-19]
  302. [ 0.350137] pci 0000:00:06.0: bridge window [io 0x7000-0x7fff]
  303. [ 0.350141] pci 0000:00:06.0: bridge window [mem 0xfa000000-0xfdffffff]
  304. [ 0.350147] pci 0000:00:06.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
  305. [ 0.350199] pci 0000:00:07.0: PCI bridge to [bus 1a]
  306. [ 0.350397] pci 0000:02:00.0: [1166:0103] type 01 class 0x060400
  307. [ 0.350493] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
  308. [ 0.350572] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
  309. [ 0.351013] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
  310. [ 0.351136] pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf5ffffff]
  311. [ 0.351220] pci 0000:03:00.0: [14e4:164c] type 00 class 0x020000
  312. [ 0.351252] pci 0000:03:00.0: reg 0x10: [mem 0xf4000000-0xf5ffffff 64bit]
  313. [ 0.351313] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
  314. [ 0.351379] pci 0000:03:00.0: PME# supported from D3hot D3cold
  315. [ 0.352068] pci 0000:02:00.0: PCI bridge to [bus 03]
  316. [ 0.352198] pci 0000:02:00.0: bridge window [mem 0xf4000000-0xf5ffffff]
  317. [ 0.352288] pci 0000:04:00.0: [1166:0103] type 01 class 0x060400
  318. [ 0.352384] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
  319. [ 0.352462] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
  320. [ 0.352669] pci 0000:00:1c.1: PCI bridge to [bus 04-05]
  321. [ 0.352793] pci 0000:00:1c.1: bridge window [mem 0xf6000000-0xf7ffffff]
  322. [ 0.352875] pci 0000:05:00.0: [14e4:164c] type 00 class 0x020000
  323. [ 0.352907] pci 0000:05:00.0: reg 0x10: [mem 0xf6000000-0xf7ffffff 64bit]
  324. [ 0.352968] pci 0000:05:00.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
  325. [ 0.353036] pci 0000:05:00.0: PME# supported from D3hot D3cold
  326. [ 0.353170] pci 0000:04:00.0: PCI bridge to [bus 05]
  327. [ 0.353299] pci 0000:04:00.0: bridge window [mem 0xf6000000-0xf7ffffff]
  328. [ 0.353379] pci 0000:01:04.0: [0e11:b203] type 00 class 0x088000
  329. [ 0.353399] pci 0000:01:04.0: reg 0x10: [io 0x2800-0x28ff]
  330. [ 0.353412] pci 0000:01:04.0: reg 0x14: [mem 0xf3fe0000-0xf3fe01ff]
  331. [ 0.353497] pci 0000:01:04.0: PME# supported from D0 D3hot D3cold
  332. [ 0.353584] pci 0000:01:04.2: [0e11:b204] type 00 class 0x088000
  333. [ 0.353606] pci 0000:01:04.2: reg 0x10: [io 0x3400-0x34ff]
  334. [ 0.353619] pci 0000:01:04.2: reg 0x14: [mem 0xf3fd0000-0xf3fd07ff]
  335. [ 0.353633] pci 0000:01:04.2: reg 0x18: [mem 0xf3fc0000-0xf3fc3fff]
  336. [ 0.353646] pci 0000:01:04.2: reg 0x1c: [mem 0xf3f00000-0xf3f7ffff]
  337. [ 0.353682] pci 0000:01:04.2: reg 0x30: [mem 0x00000000-0x0000ffff pref]
  338. [ 0.353720] pci 0000:01:04.2: PME# supported from D0 D3hot D3cold
  339. [ 0.353807] pci 0000:01:04.4: [103c:3300] type 00 class 0x0c0300
  340. [ 0.353874] pci 0000:01:04.4: reg 0x20: [io 0x3800-0x381f]
  341. [ 0.353934] pci 0000:01:04.4: PME# supported from D0 D3hot D3cold
  342. [ 0.354027] pci 0000:01:04.6: [103c:3302] type 00 class 0x0c0701
  343. [ 0.354047] pci 0000:01:04.6: reg 0x10: [mem 0xf3ef0000-0xf3ef00ff]
  344. [ 0.354142] pci 0000:01:04.6: PME# supported from D0 D3hot D3cold
  345. [ 0.354257] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
  346. [ 0.354381] pci 0000:00:1e.0: bridge window [io 0x2000-0x3fff]
  347. [ 0.354385] pci 0000:00:1e.0: bridge window [mem 0xf3e00000-0xf3ffffff]
  348. [ 0.354392] pci 0000:00:1e.0: bridge window [mem 0xc8000000-0xcfffffff 64bit pref]
  349. [ 0.354395] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
  350. [ 0.354397] pci 0000:00:1e.0: bridge window [mem 0x00000000-0x3fffffffff] (subtractive decode)
  351. [ 0.354443] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 1a
  352. [ 0.354525] PCI: pci_cache_line_size set to 64 bytes
  353. [ 0.354650] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
  354. [ 0.354652] e820: reserve RAM buffer [mem 0xbfe56000-0xbfffffff]
  355. [ 0.354654] e820: reserve RAM buffer [mem 0xbfe5f000-0xbfffffff]
  356. [ 0.354656] e820: reserve RAM buffer [mem 0x23ffff000-0x23fffffff]
  357. [ 0.354860] NetLabel: Initializing
  358. [ 0.354977] NetLabel: domain hash size = 128
  359. [ 0.355003] NetLabel: protocols = UNLABELED CIPSOv4
  360. [ 0.355150] NetLabel: unlabeled traffic allowed by default
  361. [ 0.355289] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
  362. [ 0.355392] hpet clockevent registered
  363. [ 0.355398] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
  364. [ 0.356043] clocksource: Switched to clocksource hpet
  365. [ 0.370768] VFS: Disk quotas dquot_6.6.0
  366. [ 0.370939] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  367. [ 0.375069] pnp: PnP ACPI: disabled
  368. [ 0.375389] pci 0000:0b:00.0: BAR 6: assigned [mem 0xf9e00000-0xf9e1ffff pref]
  369. [ 0.375586] pci 0000:0a:00.0: PCI bridge to [bus 0b-0d]
  370. [ 0.375707] pci 0000:0a:00.0: bridge window [io 0x5000-0x5fff]
  371. [ 0.375831] pci 0000:0a:00.0: bridge window [mem 0xf9e00000-0xf9efffff]
  372. [ 0.375960] pci 0000:0f:08.0: BAR 6: assigned [mem 0xf9f00000-0xf9f03fff pref]
  373. [ 0.376165] pci 0000:0f:04.0: PCI bridge to [bus 10]
  374. [ 0.376297] pci 0000:0e:00.0: PCI bridge to [bus 0f-10]
  375. [ 0.376418] pci 0000:0e:00.0: bridge window [io 0x6000-0x6fff]
  376. [ 0.376541] pci 0000:0e:00.0: bridge window [mem 0xf9f00000-0xf9ffffff]
  377. [ 0.376671] pci 0000:0a:01.0: PCI bridge to [bus 0e-10]
  378. [ 0.376791] pci 0000:0a:01.0: bridge window [io 0x6000-0x6fff]
  379. [ 0.376914] pci 0000:0a:01.0: bridge window [mem 0xf9f00000-0xf9ffffff]
  380. [ 0.377049] pci 0000:0a:02.0: PCI bridge to [bus 11]
  381. [ 0.377178] pci 0000:09:00.0: PCI bridge to [bus 0a-11]
  382. [ 0.377298] pci 0000:09:00.0: bridge window [io 0x5000-0x6fff]
  383. [ 0.377422] pci 0000:09:00.0: bridge window [mem 0xf9e00000-0xf9ffffff]
  384. [ 0.377549] pci 0000:09:00.3: PCI bridge to [bus 12]
  385. [ 0.377678] pci 0000:00:02.0: PCI bridge to [bus 09-12]
  386. [ 0.377798] pci 0000:00:02.0: bridge window [io 0x5000-0x6fff]
  387. [ 0.377921] pci 0000:00:02.0: bridge window [mem 0xf9d00000-0xf9ffffff]
  388. [ 0.378056] pci 0000:06:00.0: BAR 6: assigned [mem 0xf9c00000-0xf9c1ffff pref]
  389. [ 0.378251] pci 0000:00:03.0: PCI bridge to [bus 06-08]
  390. [ 0.378372] pci 0000:00:03.0: bridge window [io 0x4000-0x4fff]
  391. [ 0.378494] pci 0000:00:03.0: bridge window [mem 0xf9c00000-0xf9cfffff]
  392. [ 0.378620] pci 0000:00:04.0: PCI bridge to [bus 13-15]
  393. [ 0.378748] pci 0000:00:05.0: PCI bridge to [bus 16]
  394. [ 0.378876] pci 0000:17:00.0: BAR 6: assigned [mem 0xfc000000-0xfc01ffff pref]
  395. [ 0.379079] pci 0000:00:06.0: PCI bridge to [bus 17-19]
  396. [ 0.379199] pci 0000:00:06.0: bridge window [io 0x7000-0x7fff]
  397. [ 0.379322] pci 0000:00:06.0: bridge window [mem 0xfa000000-0xfdffffff]
  398. [ 0.379445] pci 0000:00:06.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
  399. [ 0.379644] pci 0000:00:07.0: PCI bridge to [bus 1a]
  400. [ 0.379777] pci 0000:03:00.0: BAR 6: no space for [mem size 0x00000800 pref]
  401. [ 0.379899] pci 0000:03:00.0: BAR 6: failed to assign [mem size 0x00000800 pref]
  402. [ 0.380101] pci 0000:02:00.0: PCI bridge to [bus 03]
  403. [ 0.380225] pci 0000:02:00.0: bridge window [mem 0xf4000000-0xf5ffffff]
  404. [ 0.380356] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
  405. [ 0.380479] pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf5ffffff]
  406. [ 0.380608] pci 0000:05:00.0: BAR 6: no space for [mem size 0x00000800 pref]
  407. [ 0.380729] pci 0000:05:00.0: BAR 6: failed to assign [mem size 0x00000800 pref]
  408. [ 0.380925] pci 0000:04:00.0: PCI bridge to [bus 05]
  409. [ 0.381055] pci 0000:04:00.0: bridge window [mem 0xf6000000-0xf7ffffff]
  410. [ 0.381186] pci 0000:00:1c.1: PCI bridge to [bus 04-05]
  411. [ 0.381310] pci 0000:00:1c.1: bridge window [mem 0xf6000000-0xf7ffffff]
  412. [ 0.381442] pci 0000:01:04.2: BAR 6: assigned [mem 0xf3e00000-0xf3e0ffff pref]
  413. [ 0.381638] pci 0000:00:1e.0: PCI bridge to [bus 01]
  414. [ 0.381759] pci 0000:00:1e.0: bridge window [io 0x2000-0x3fff]
  415. [ 0.381882] pci 0000:00:1e.0: bridge window [mem 0xf3e00000-0xf3ffffff]
  416. [ 0.382012] pci 0000:00:1e.0: bridge window [mem 0xc8000000-0xcfffffff 64bit pref]
  417. [ 0.382214] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
  418. [ 0.382216] pci_bus 0000:00: resource 5 [mem 0x00000000-0x3fffffffff]
  419. [ 0.382219] pci_bus 0000:09: resource 0 [io 0x5000-0x6fff]
  420. [ 0.382221] pci_bus 0000:09: resource 1 [mem 0xf9d00000-0xf9ffffff]
  421. [ 0.382224] pci_bus 0000:0a: resource 0 [io 0x5000-0x6fff]
  422. [ 0.382226] pci_bus 0000:0a: resource 1 [mem 0xf9e00000-0xf9ffffff]
  423. [ 0.382229] pci_bus 0000:0b: resource 0 [io 0x5000-0x5fff]
  424. [ 0.382231] pci_bus 0000:0b: resource 1 [mem 0xf9e00000-0xf9efffff]
  425. [ 0.382233] pci_bus 0000:0e: resource 0 [io 0x6000-0x6fff]
  426. [ 0.382236] pci_bus 0000:0e: resource 1 [mem 0xf9f00000-0xf9ffffff]
  427. [ 0.382238] pci_bus 0000:0f: resource 0 [io 0x6000-0x6fff]
  428. [ 0.382240] pci_bus 0000:0f: resource 1 [mem 0xf9f00000-0xf9ffffff]
  429. [ 0.382243] pci_bus 0000:06: resource 0 [io 0x4000-0x4fff]
  430. [ 0.382245] pci_bus 0000:06: resource 1 [mem 0xf9c00000-0xf9cfffff]
  431. [ 0.382248] pci_bus 0000:17: resource 0 [io 0x7000-0x7fff]
  432. [ 0.382250] pci_bus 0000:17: resource 1 [mem 0xfa000000-0xfdffffff]
  433. [ 0.382252] pci_bus 0000:17: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
  434. [ 0.382255] pci_bus 0000:02: resource 1 [mem 0xf4000000-0xf5ffffff]
  435. [ 0.382257] pci_bus 0000:03: resource 1 [mem 0xf4000000-0xf5ffffff]
  436. [ 0.382260] pci_bus 0000:04: resource 1 [mem 0xf6000000-0xf7ffffff]
  437. [ 0.382262] pci_bus 0000:05: resource 1 [mem 0xf6000000-0xf7ffffff]
  438. [ 0.382265] pci_bus 0000:01: resource 0 [io 0x2000-0x3fff]
  439. [ 0.382267] pci_bus 0000:01: resource 1 [mem 0xf3e00000-0xf3ffffff]
  440. [ 0.382269] pci_bus 0000:01: resource 2 [mem 0xc8000000-0xcfffffff 64bit pref]
  441. [ 0.382271] pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
  442. [ 0.382274] pci_bus 0000:01: resource 5 [mem 0x00000000-0x3fffffffff]
  443. [ 0.382345] NET: Registered protocol family 2
  444. [ 0.382784] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
  445. [ 0.383269] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  446. [ 0.383905] TCP: Hash tables configured (established 65536 bind 65536)
  447. [ 0.384111] UDP hash table entries: 4096 (order: 5, 131072 bytes)
  448. [ 0.384302] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
  449. [ 0.384583] NET: Registered protocol family 1
  450. [ 0.384787] pci 0000:00:1d.0: PCI->APIC IRQ transform: INT A -> IRQ 16
  451. [ 0.384940] pci 0000:00:1d.1: PCI->APIC IRQ transform: INT B -> IRQ 17
  452. [ 0.385100] pci 0000:00:1d.2: PCI->APIC IRQ transform: INT C -> IRQ 18
  453. [ 0.385249] pci 0000:00:1d.3: PCI->APIC IRQ transform: INT D -> IRQ 19
  454. [ 0.385398] pci 0000:00:1d.7: PCI->APIC IRQ transform: INT A -> IRQ 16
  455. [ 0.398079] pci 0000:01:04.4: PCI->APIC IRQ transform: INT B -> IRQ 22
  456. [ 0.399212] pci 0000:17:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
  457. [ 0.399407] PCI: CLS 64 bytes, default 64
  458. [ 0.399507] Trying to unpack rootfs image as initramfs...
  459. [ 7.584519] Freeing initrd memory: 33180K (ffff880033f21000 - ffff880035f88000)
  460. [ 7.584725] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
  461. [ 7.584845] software IO TLB [mem 0xbbe56000-0xbfe56000] (64MB) mapped at [ffff8800bbe56000-ffff8800bfe55fff]
  462. [ 7.585223] platform rtc_cmos: registered platform RTC device (no PNP device found)
  463. [ 7.585968] audit: initializing netlink subsys (disabled)
  464. [ 7.586150] audit: type=2000 audit(1495130329.585:1): initialized
  465. [ 7.586708] Initialise system trusted keyrings
  466. [ 7.587036] workingset: timestamp_bits=46 max_order=21 bucket_order=0
  467. [ 7.587459] SELinux: Registering netfilter hooks
  468. [ 7.588577] Key type asymmetric registered
  469. [ 7.588695] Asymmetric key parser 'x509' registered
  470. [ 7.588835] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
  471. [ 7.589107] io scheduler noop registered
  472. [ 7.589223] io scheduler deadline registered
  473. [ 7.589346] io scheduler cfq registered (default)
  474. [ 7.590264] pcieport 0000:00:1c.0: PCI->APIC IRQ transform: INT A -> IRQ 16
  475. [ 7.590496] pcieport 0000:00:1c.1: PCI->APIC IRQ transform: INT B -> IRQ 17
  476. [ 7.590791] pcieport 0000:0a:00.0: PCI->APIC IRQ transform: INT A -> IRQ 16
  477. [ 7.590952] pcieport 0000:0a:01.0: PCI->APIC IRQ transform: INT A -> IRQ 17
  478. [ 7.591123] pcieport 0000:0a:02.0: PCI->APIC IRQ transform: INT A -> IRQ 18
  479. [ 7.591358] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
  480. [ 7.591478] pcieport 0000:09:00.0: Signaling PME through PCIe PME interrupt
  481. [ 7.591597] pcieport 0000:0a:00.0: Signaling PME through PCIe PME interrupt
  482. [ 7.591715] pci 0000:0b:00.0: Signaling PME through PCIe PME interrupt
  483. [ 7.591834] pcieport 0000:0a:01.0: Signaling PME through PCIe PME interrupt
  484. [ 7.591952] pci 0000:0e:00.0: Signaling PME through PCIe PME interrupt
  485. [ 7.592078] pci 0000:0f:04.0: Signaling PME through PCIe PME interrupt
  486. [ 7.592197] pci 0000:0f:08.0: Signaling PME through PCIe PME interrupt
  487. [ 7.592315] pcieport 0000:0a:02.0: Signaling PME through PCIe PME interrupt
  488. [ 7.592434] pci 0000:09:00.3: Signaling PME through PCIe PME interrupt
  489. [ 7.592554] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded
  490. [ 7.592580] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
  491. [ 7.592700] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
  492. [ 7.592821] pcie_pme 0000:00:03.0:pcie001: service driver pcie_pme loaded
  493. [ 7.592844] pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt
  494. [ 7.592965] pcie_pme 0000:00:04.0:pcie001: service driver pcie_pme loaded
  495. [ 7.592995] pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt
  496. [ 7.593124] pcie_pme 0000:00:05.0:pcie001: service driver pcie_pme loaded
  497. [ 7.593155] pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt
  498. [ 7.593275] pci 0000:17:00.0: Signaling PME through PCIe PME interrupt
  499. [ 7.593395] pcie_pme 0000:00:06.0:pcie001: service driver pcie_pme loaded
  500. [ 7.593418] pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt
  501. [ 7.593540] pcie_pme 0000:00:07.0:pcie001: service driver pcie_pme loaded
  502. [ 7.593571] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
  503. [ 7.593691] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
  504. [ 7.593809] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
  505. [ 7.593930] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
  506. [ 7.593962] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
  507. [ 7.594090] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
  508. [ 7.594208] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
  509. [ 7.594329] pcie_pme 0000:00:1c.1:pcie001: service driver pcie_pme loaded
  510. [ 7.594427] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  511. [ 7.595344] intel_rng: FWH not detected
  512. [ 7.595511] intel_idle: does not run on family 6 model 15
  513. [ 7.595522] ipmi message handler version 39.2
  514. [ 7.595653] IPMI System Interface driver.
  515. [ 7.595784] ipmi_si 0000:01:04.6: probing via PCI
  516. [ 7.595910] ipmi_si 0000:01:04.6: PCI->APIC IRQ transform: INT A -> IRQ 21
  517. [ 7.596051] ipmi_si 0000:01:04.6: [mem 0xf3ef0000-0xf3ef00ff] regsize 1 spacing 1 irq 21
  518. [ 7.596245] ipmi_si: Adding PCI-specified kcs state machine
  519. [ 7.596423] ipmi_si: probing via SMBIOS
  520. [ 7.596539] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
  521. [ 7.596656] ipmi_si: Adding SMBIOS-specified kcs state machine
  522. [ 7.596810] ipmi_si: Trying PCI-specified kcs state machine at mem address 0xf3ef0000, slave address 0x0, irq 21
  523. [ 7.919027] ipmi_si 0000:01:04.6: Using irq 21
  524. [ 7.936155] random: fast init done
  525. [ 7.941459] ipmi_si 0000:01:04.6: Found new BMC (man_id: 0x00000b, prod_id: 0x2000, dev_id: 0x11)
  526. [ 7.941673] ipmi_si 0000:01:04.6: IPMI kcs interface initialized
  527. [ 7.946894] brd: module loaded
  528. [ 7.949550] loop: module loaded
  529. [ 7.949780] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  530. [ 7.949902] ehci-pci: EHCI PCI platform driver
  531. [ 7.950066] ehci-pci 0000:00:1d.7: PCI->APIC IRQ transform: INT A -> IRQ 16
  532. [ 7.950241] ehci-pci 0000:00:1d.7: EHCI Host Controller
  533. [ 7.950421] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
  534. [ 7.950629] ehci-pci 0000:00:1d.7: debug port 1
  535. [ 7.954673] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
  536. [ 7.954686] ehci-pci 0000:00:1d.7: irq 16, io mem 0xf3df0000
  537. [ 7.961022] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
  538. [ 7.961212] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  539. [ 7.961332] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  540. [ 7.961525] usb usb1: Product: EHCI Host Controller
  541. [ 7.961642] usb usb1: Manufacturer: Linux 4.9.16-gentoo ehci_hcd
  542. [ 7.961760] usb usb1: SerialNumber: 0000:00:1d.7
  543. [ 7.962087] hub 1-0:1.0: USB hub found
  544. [ 7.962214] hub 1-0:1.0: 8 ports detected
  545. [ 7.962629] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  546. [ 7.962750] ohci-pci: OHCI PCI platform driver
  547. [ 7.962887] uhci_hcd: USB Universal Host Controller Interface driver
  548. [ 7.964818] uhci_hcd 0000:00:1d.0: PCI->APIC IRQ transform: INT A -> IRQ 16
  549. [ 7.964949] uhci_hcd 0000:00:1d.0: UHCI Host Controller
  550. [ 7.965137] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
  551. [ 7.965337] uhci_hcd 0000:00:1d.0: detected 2 ports
  552. [ 7.965473] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001000
  553. [ 7.965658] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  554. [ 7.965778] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  555. [ 7.965971] usb usb2: Product: UHCI Host Controller
  556. [ 7.966098] usb usb2: Manufacturer: Linux 4.9.16-gentoo uhci_hcd
  557. [ 7.966217] usb usb2: SerialNumber: 0000:00:1d.0
  558. [ 7.966505] hub 2-0:1.0: USB hub found
  559. [ 7.966630] hub 2-0:1.0: 2 ports detected
  560. [ 7.966895] uhci_hcd 0000:00:1d.1: PCI->APIC IRQ transform: INT B -> IRQ 17
  561. [ 7.967033] uhci_hcd 0000:00:1d.1: UHCI Host Controller
  562. [ 7.967216] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
  563. [ 7.967415] uhci_hcd 0000:00:1d.1: detected 2 ports
  564. [ 7.967554] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001020
  565. [ 7.967737] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  566. [ 7.967857] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  567. [ 7.968058] usb usb3: Product: UHCI Host Controller
  568. [ 7.968175] usb usb3: Manufacturer: Linux 4.9.16-gentoo uhci_hcd
  569. [ 7.968294] usb usb3: SerialNumber: 0000:00:1d.1
  570. [ 7.968579] hub 3-0:1.0: USB hub found
  571. [ 7.968703] hub 3-0:1.0: 2 ports detected
  572. [ 7.968968] uhci_hcd 0000:00:1d.2: PCI->APIC IRQ transform: INT C -> IRQ 18
  573. [ 7.969107] uhci_hcd 0000:00:1d.2: UHCI Host Controller
  574. [ 7.969285] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
  575. [ 7.969484] uhci_hcd 0000:00:1d.2: detected 2 ports
  576. [ 7.969622] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001040
  577. [ 7.969806] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
  578. [ 7.969926] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  579. [ 7.970127] usb usb4: Product: UHCI Host Controller
  580. [ 7.970244] usb usb4: Manufacturer: Linux 4.9.16-gentoo uhci_hcd
  581. [ 7.970362] usb usb4: SerialNumber: 0000:00:1d.2
  582. [ 7.970650] hub 4-0:1.0: USB hub found
  583. [ 7.970773] hub 4-0:1.0: 2 ports detected
  584. [ 7.971049] uhci_hcd 0000:00:1d.3: PCI->APIC IRQ transform: INT D -> IRQ 19
  585. [ 7.971180] uhci_hcd 0000:00:1d.3: UHCI Host Controller
  586. [ 7.971366] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
  587. [ 7.971565] uhci_hcd 0000:00:1d.3: detected 2 ports
  588. [ 7.971703] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001060
  589. [ 7.971885] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
  590. [ 7.972013] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  591. [ 7.972206] usb usb5: Product: UHCI Host Controller
  592. [ 7.972323] usb usb5: Manufacturer: Linux 4.9.16-gentoo uhci_hcd
  593. [ 7.972441] usb usb5: SerialNumber: 0000:00:1d.3
  594. [ 7.972728] hub 5-0:1.0: USB hub found
  595. [ 7.972852] hub 5-0:1.0: 2 ports detected
  596. [ 7.973128] uhci_hcd 0000:01:04.4: PCI->APIC IRQ transform: INT B -> IRQ 22
  597. [ 7.973259] uhci_hcd 0000:01:04.4: UHCI Host Controller
  598. [ 7.973436] uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 6
  599. [ 7.973641] uhci_hcd 0000:01:04.4: detected 8 ports
  600. [ 7.973758] uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports
  601. [ 7.974818] uhci_hcd 0000:01:04.4: irq 22, io base 0x00003800
  602. [ 7.975207] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
  603. [ 7.975328] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  604. [ 7.975521] usb usb6: Product: UHCI Host Controller
  605. [ 7.975637] usb usb6: Manufacturer: Linux 4.9.16-gentoo uhci_hcd
  606. [ 7.975756] usb usb6: SerialNumber: 0000:01:04.4
  607. [ 7.976049] hub 6-0:1.0: USB hub found
  608. [ 7.976173] hub 6-0:1.0: 2 ports detected
  609. [ 7.976481] i8042: PNP: No PS/2 controller found. Probing ports directly.
  610. [ 7.978395] serio: i8042 KBD port at 0x60,0x64 irq 1
  611. [ 7.978517] serio: i8042 AUX port at 0x60,0x64 irq 12
  612. [ 7.978817] mousedev: PS/2 mouse device common for all mice
  613. [ 7.979199] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
  614. [ 7.979345] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram, hpet irqs
  615. [ 7.979566] hidraw: raw HID events driver (C) Jiri Kosina
  616. [ 7.979856] usbcore: registered new interface driver usbhid
  617. [ 7.979973] usbhid: USB HID core driver
  618. [ 7.980125] drop_monitor: Initializing network drop monitor service
  619. [ 7.980347] Initializing XFRM netlink socket
  620. [ 7.980526] NET: Registered protocol family 10
  621. [ 7.980992] NET: Registered protocol family 17
  622. [ 7.981441] microcode: sig=0x6fb, pf=0x4, revision=0xb4
  623. [ 7.981650] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
  624. [ 7.982067] registered taskstats version 1
  625. [ 7.982185] Loading compiled-in X.509 certificates
  626. [ 8.011604] Loaded X.509 cert 'Build time autogenerated kernel key: 37e1880f1da7a8c0fc038240216ecb6920c39883'
  627. [ 8.011824] ima: No TPM chip found, activating TPM-bypass!
  628. [ 8.012579] rtc_cmos rtc_cmos: setting system clock to 2017-05-18 17:58:50 UTC (1495130330)
  629. [ 8.015386] Freeing unused kernel memory: 1380K (ffffffff81d32000 - ffffffff81e8b000)
  630. [ 8.015582] Write protecting the kernel read-only data: 12288k
  631. [ 8.017051] Freeing unused kernel memory: 1896K (ffff880001626000 - ffff880001800000)
  632. [ 8.021782] Freeing unused kernel memory: 1188K (ffff880001ad7000 - ffff880001c00000)
  633. [ 8.022102] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
  634. [ 8.289028] usb 6-1: new full-speed USB device number 2 using uhci_hcd
  635. [ 8.410568] usb 4-2: new low-speed USB device number 2 using uhci_hcd
  636. [ 8.429891] usb 6-1: New USB device found, idVendor=03f0, idProduct=1027
  637. [ 8.429894] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  638. [ 8.429897] usb 6-1: Product: Virtual Keyboard
  639. [ 8.429899] usb 6-1: Manufacturer: HP
  640. [ 8.440458] input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:1e.0/0000:01:04.4/usb6/6-1/6-1:1.0/0003:03F0:1027.0001/input/input3
  641. [ 8.492425] hid-generic 0003:03F0:1027.0001: input,hidraw0: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1/input0
  642. [ 8.500858] input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:1e.0/0000:01:04.4/usb6/6-1/6-1:1.1/0003:03F0:1027.0002/input/input4
  643. [ 8.501051] hid-generic 0003:03F0:1027.0002: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1/input1
  644. [ 8.575045] usb 4-2: New USB device found, idVendor=09da, idProduct=c10a
  645. [ 8.575049] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  646. [ 8.575052] usb 4-2: Product: USB Mouse
  647. [ 8.575054] usb 4-2: Manufacturer: A4Tech
  648. [ 8.593789] input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/0003:09DA:C10A.0003/input/input5
  649. [ 8.594071] hid-generic 0003:09DA:C10A.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [A4Tech USB Mouse] on usb-0000:00:1d.2-2/input0
  650. [ 8.608029] tsc: Refined TSC clocksource calibration: 1599.999 MHz
  651. [ 8.608038] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x171023f09ff, max_idle_ns: 440795233615 ns
  652. [ 8.809041] ata_piix 0000:00:1f.1: version 2.13
  653. [ 8.809063] ata_piix 0000:00:1f.1: PCI->APIC IRQ transform: INT A -> IRQ 17
  654. [ 8.809948] scsi host0: ata_piix
  655. [ 8.810227] scsi host1: ata_piix
  656. [ 8.810313] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x500 irq 14
  657. [ 8.810315] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x508 irq 15
  658. [ 8.998318] ata1.00: ATAPI: DV-28E-V, C.AB, max UDMA/33
  659. [ 9.019204] ata1.00: configured for UDMA/33
  660. [ 9.026837] scsi 0:0:0:0: CD-ROM TEAC DV-28E-V C.AB PQ: 0 ANSI: 5
  661. [ 9.085823] scsi 0:0:0:0: Attached scsi generic sg0 type 5
  662. [ 9.122095] sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
  663. [ 9.122099] cdrom: Uniform CD-ROM driver Revision: 3.20
  664. [ 9.122361] sr 0:0:0:0: Attached scsi CD-ROM sr0
  665. [ 9.586859] imm: Version 2.05 (for Linux 2.4.0)
  666. [ 9.616149] clocksource: Switched to clocksource tsc
  667. [ 9.706771] Fusion MPT base driver 3.04.20
  668. [ 9.706774] Copyright (c) 1999-2008 LSI Corporation
  669. [ 9.723222] Fusion MPT SPI Host driver 3.04.20
  670. [ 9.736913] Fusion MPT FC Host driver 3.04.20
  671. [ 9.751631] Fusion MPT SAS Host driver 3.04.20
  672. [ 9.759540] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
  673. [ 9.767552] 3ware Storage Controller device driver for Linux v1.26.02.003.
  674. [ 9.775371] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
  675. [ 9.801221] HP CISS Driver (v 3.6.26)
  676. [ 9.801459] cciss 0000:0f:08.0: using bridge 0000:0e:00.0 INT A to get IRQ 17
  677. [ 9.801462] cciss 0000:0f:08.0: PCI->APIC IRQ transform: INT A -> IRQ 17
  678. [ 9.881094] cciss 0000:0f:08.0: cciss0: <0x3238> at PCI 0000:0f:08.0 IRQ 32 using DAC
  679. [ 9.886604] cciss/c0d0: p1 p2 p3 p4
  680. [ 9.887309] scsi host2: cciss
  681. [ 9.945709] Adaptec aacraid driver 1.2-1[41066]-ms
  682. [ 9.968385] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
  683. [ 9.973077] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
  684. [ 9.990758] megasas: 06.811.02.00-rc1
  685. [ 10.059972] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.38-k.
  686. [ 10.111341] Emulex LightPulse Fibre Channel SCSI driver 11.2.0.0.
  687. [ 10.111344] Copyright(c) 2004-2016 Emulex. All rights reserved.
  688. [ 10.158541] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
  689. [ 10.269557] usbcore: registered new interface driver usb-storage
  690. [ 10.765327] device-mapper: uevent: version 1.0.3
  691. [ 10.765447] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
  692. [ 10.867015] raid6: sse2x1 gen() 2152 MB/s
  693. [ 10.884005] raid6: sse2x1 xor() 2714 MB/s
  694. [ 10.901007] raid6: sse2x2 gen() 4125 MB/s
  695. [ 10.918005] raid6: sse2x2 xor() 3306 MB/s
  696. [ 10.935008] raid6: sse2x4 gen() 4609 MB/s
  697. [ 10.952011] raid6: sse2x4 xor() 3597 MB/s
  698. [ 10.952013] raid6: using algorithm sse2x4 gen() 4609 MB/s
  699. [ 10.952014] raid6: .... xor() 3597 MB/s, rmw enabled
  700. [ 10.952015] raid6: using ssse3x2 recovery algorithm
  701. [ 10.955300] async_tx: api initialized (async)
  702. [ 10.957840] xor: measuring software checksum speed
  703. [ 10.967006] prefetch64-sse: 6336.000 MB/sec
  704. [ 10.977005] generic_sse: 5640.000 MB/sec
  705. [ 10.977007] xor: using function: prefetch64-sse (6336.000 MB/sec)
  706. [ 11.003099] md: raid6 personality registered for level 6
  707. [ 11.003103] md: raid5 personality registered for level 5
  708. [ 11.003104] md: raid4 personality registered for level 4
  709. [ 11.007544] device-mapper: raid: Loading target version 1.9.1
  710. [ 11.018397] md: raid0 personality registered for level 0
  711. [ 11.027474] md: raid1 personality registered for level 1
  712. [ 11.073217] md: raid10 personality registered for level 10
  713. [ 11.080813] md: linear personality registered for level -1
  714. [ 11.326001] Btrfs loaded, crc32c=crc32c-generic
  715. [ 11.391566] JFS: nTxBlock = 8192, nTxLock = 65536
  716. [ 11.411482] FS-Cache: Loaded
  717. [ 11.470695] RPC: Registered named UNIX socket transport module.
  718. [ 11.470697] RPC: Registered udp transport module.
  719. [ 11.470699] RPC: Registered tcp transport module.
  720. [ 11.470700] RPC: Registered tcp NFSv4.1 backchannel transport module.
  721. [ 11.560547] FS-Cache: Netfs 'nfs' registered for caching
  722. [ 11.743020] SGI XFS with ACLs, security attributes, no debug enabled
  723. [ 11.779012] fuse init (API version 7.26)
  724. [ 11.806060] bnx2: QLogic bnx2 Gigabit Ethernet Driver v2.2.6 (January 29, 2014)
  725. [ 11.806115] bnx2 0000:03:00.0: PCI->APIC IRQ transform: INT A -> IRQ 16
  726. [ 12.179618] bnx2 0000:03:00.0 eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f4000000, IRQ 16, node addr 00:1e:0b:da:1f:fa
  727. [ 12.179698] bnx2 0000:05:00.0: PCI->APIC IRQ transform: INT A -> IRQ 17
  728. [ 12.549591] bnx2 0000:05:00.0 eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f6000000, IRQ 17, node addr 00:1e:0b:da:1f:f8
  729. [ 12.569028] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
  730. [ 12.569030] e1000: Copyright (c) 1999-2006 Intel Corporation.
  731. [ 12.577200] dca service started, version 1.12.1
  732. [ 12.588736] pps_core: LinuxPPS API ver. 1 registered
  733. [ 12.588739] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  734. [ 12.594106] PTP clock support registered
  735. [ 12.621788] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
  736. [ 12.621791] igb: Copyright (c) 2007-2014 Intel Corporation.
  737. [ 12.634929] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
  738. [ 12.657778] sky2: driver version 1.30
  739. [ 12.712334] VMware vmxnet3 virtual NIC driver - version 1.4.a.0-k-NAPI
  740. [ 12.727120] Loading iSCSI transport class v2.0-870.
  741. [ 12.751536] iscsi: registered transport (tcp)
  742. [ 12.888871] EXT2-fs (cciss/c0d0p4): error: couldn't mount because of unsupported optional features (2c0)
  743. [ 12.889213] EXT4-fs (cciss!c0d0p4): couldn't mount as ext3 due to feature incompatibilities
  744. [ 13.062001] EXT4-fs (cciss!c0d0p4): mounted filesystem with ordered data mode. Opts: (null)
  745. [ 13.623549] random: crng init done
  746. [ 15.348426] udevd[2308]: starting version 3.1.5
  747. [ 15.950623] bnx2 0000:03:00.0 enp3s0: renamed from eth0
  748. [ 15.961377] bnx2 0000:05:00.0 enp5s0: renamed from eth1
  749. [ 15.976402] hpwdt 0000:01:04.0: PCI->APIC IRQ transform: INT A -> IRQ 21
  750. [ 15.976459] hpwdt 0000:01:04.0: HPE Watchdog Timer Driver: NMI decoding initialized, allow kernel dump: ON (default = 1/ON)
  751. [ 15.976541] hpwdt 0000:01:04.0: HPE Watchdog Timer Driver: 1.4.0, timer margin: 30 seconds (nowayout=0).
  752. [ 16.012112] input: PC Speaker as /devices/platform/pcspkr/input/input6
  753. [ 16.061131] EDAC MC: Ver: 3.0.0
  754. [ 16.255170] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  755. [ 16.255173] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  756. [ 16.255260] e1000e 0000:06:00.0: PCI->APIC IRQ transform: INT A -> IRQ 18
  757. [ 16.255364] e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
  758. [ 16.302617] iTCO_vendor_support: vendor-support=0
  759. [ 16.307932] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
  760. [ 16.307984] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
  761. [ 16.413111] EDAC MC0: Giving out device to module i5000_edac.c controller I5000: DEV 0000:00:10.0 (POLLED)
  762. [ 16.413144] EDAC PCI0: Giving out device to module i5000_edac controller EDAC PCI controller: DEV 0000:00:10.0 (POLLED)
  763. [ 16.434675] Error: Driver 'pcspkr' is already registered, aborting...
  764. [ 16.436452] e1000e 0000:06:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:18:71:eb:5b:56
  765. [ 16.436455] e1000e 0000:06:00.0 eth0: Intel(R) PRO/1000 Network Connection
  766. [ 16.436536] e1000e 0000:06:00.0 eth0: MAC: 1, PHY: 4, PBA No: D70413-003
  767. [ 16.436599] e1000e 0000:0b:00.0: PCI->APIC IRQ transform: INT A -> IRQ 16
  768. [ 16.436709] e1000e 0000:0b:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
  769. [ 16.613042] e1000e 0000:0b:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:18:71:eb:7c:f9
  770. [ 16.613046] e1000e 0000:0b:00.0 eth1: Intel(R) PRO/1000 Network Connection
  771. [ 16.613130] e1000e 0000:0b:00.0 eth1: MAC: 1, PHY: 4, PBA No: D70413-003
  772. [ 16.623740] e1000e 0000:06:00.0 enp6s0: renamed from eth0
  773. [ 16.631192] e1000e 0000:0b:00.0 enp11s0: renamed from eth1
  774. [ 16.982736] kvm: disabled by bios
  775. [ 17.003323] coretemp coretemp.0: Using relative temperature scale!
  776. [ 17.003344] coretemp coretemp.0: Using relative temperature scale!
  777. [ 17.003459] coretemp coretemp.3: Using relative temperature scale!
  778. [ 17.003483] coretemp coretemp.3: Using relative temperature scale!
  779. [ 17.005548] kvm: disabled by bios
  780. [ 17.013923] EXT4-fs (cciss!c0d0p4): re-mounted. Opts: (null)
  781. [ 17.230421] EXT4-fs (cciss!c0d0p2): mounted filesystem with ordered data mode. Opts: (null)
  782. [ 19.892983] bnx2 0000:03:00.0: Direct firmware load for bnx2/bnx2-mips-06-6.2.3.fw failed with error -2
  783. [ 19.892987] bnx2: Can't load firmware file "bnx2/bnx2-mips-06-6.2.3.fw"
  784. [ 19.893162] bnx2 0000:05:00.0: Direct firmware load for bnx2/bnx2-mips-06-6.2.3.fw failed with error -2
  785. [ 19.893165] bnx2: Can't load firmware file "bnx2/bnx2-mips-06-6.2.3.fw"
  786. [ 20.152431] IPv6: ADDRCONF(NETDEV_UP): enp6s0: link is not ready
  787. [ 20.408426] IPv6: ADDRCONF(NETDEV_UP): enp11s0: link is not ready
  788. [ 21.505018] e1000e: enp6s0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
  789. [ 21.505140] e1000e 0000:06:00.0 enp6s0: 10/100 speed: disabling TSO
  790. [ 21.505220] IPv6: ADDRCONF(NETDEV_CHANGE): enp6s0: link becomes ready
  791. [ 21.560765] sddm[3105]: segfault at 900 ip 0000000000000900 sp 00007ffe33c1d708 error 14 in sddm[400000+6f000]
  792.