spacepaste

  1.  
  2. # dmesg
  3. [ 0.000000] Linux version 4.9.76-gentoo-r1 (root@Hp840) (gcc version 6.4.0 (Gentoo 6.4.0-r1 p1.3) ) #3 SMP Sat Mar 10 18:35:07 CET 2018
  4. [ 0.000000] Command line: \\boot\kernel-genkernel-x86_64-4.9.76-gentoo-r1 ro root=/dev/sda6 initrd=boot\initramfs-genkernel-x86_64-4.9.76-gentoo-r1
  5. [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
  6. [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
  7. [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
  8. [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
  9. [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
  10. [ 0.000000] x86/fpu: Using 'eager' FPU context switches.
  11. [ 0.000000] e820: BIOS-provided physical RAM map:
  12. [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
  13. [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
  14. [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009cfff] usable
  15. [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
  16. [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009cb7efff] usable
  17. [ 0.000000] BIOS-e820: [mem 0x000000009cb7f000-0x000000009de7efff] reserved
  18. [ 0.000000] BIOS-e820: [mem 0x000000009de7f000-0x000000009df7efff] ACPI NVS
  19. [ 0.000000] BIOS-e820: [mem 0x000000009df7f000-0x000000009dffefff] ACPI data
  20. [ 0.000000] BIOS-e820: [mem 0x000000009dfff000-0x000000009dffffff] usable
  21. [ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
  22. [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
  23. [ 0.000000] BIOS-e820: [mem 0x00000000ffdb0000-0x00000000ffdcefff] reserved
  24. [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043edfffff] usable
  25. [ 0.000000] NX (Execute Disable) protection: active
  26. [ 0.000000] e820: update [mem 0x91b78018-0x91b88057] usable ==> usable
  27. [ 0.000000] e820: update [mem 0x91b6e018-0x91b77457] usable ==> usable
  28. [ 0.000000] extended physical RAM map:
  29. [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
  30. [ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
  31. [ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009cfff] usable
  32. [ 0.000000] reserve setup_data: [mem 0x000000000009d000-0x000000000009ffff] reserved
  33. [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000091b6e017] usable
  34. [ 0.000000] reserve setup_data: [mem 0x0000000091b6e018-0x0000000091b77457] usable
  35. [ 0.000000] reserve setup_data: [mem 0x0000000091b77458-0x0000000091b78017] usable
  36. [ 0.000000] reserve setup_data: [mem 0x0000000091b78018-0x0000000091b88057] usable
  37. [ 0.000000] reserve setup_data: [mem 0x0000000091b88058-0x000000009cb7efff] usable
  38. [ 0.000000] reserve setup_data: [mem 0x000000009cb7f000-0x000000009de7efff] reserved
  39. [ 0.000000] reserve setup_data: [mem 0x000000009de7f000-0x000000009df7efff] ACPI NVS
  40. [ 0.000000] reserve setup_data: [mem 0x000000009df7f000-0x000000009dffefff] ACPI data
  41. [ 0.000000] reserve setup_data: [mem 0x000000009dfff000-0x000000009dffffff] usable
  42. [ 0.000000] reserve setup_data: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
  43. [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
  44. [ 0.000000] reserve setup_data: [mem 0x00000000ffdb0000-0x00000000ffdcefff] reserved
  45. [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000043edfffff] usable
  46. [ 0.000000] efi: EFI v2.31 by HPQ
  47. [ 0.000000] efi: ACPI=0x9dffe000 ACPI 2.0=0x9dffe014 SMBIOS=0x9d333218
  48. [ 0.000000] SMBIOS 2.7 present.
  49. [ 0.000000] DMI: Hewlett-Packard HP EliteBook 840 G1/198F, BIOS L71 Ver. 01.40 07/13/2017
  50. [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
  51. [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
  52. [ 0.000000] e820: last_pfn = 0x43ee00 max_arch_pfn = 0x400000000
  53. [ 0.000000] MTRR default type: uncachable
  54. [ 0.000000] MTRR fixed ranges enabled:
  55. [ 0.000000] 00000-9FFFF write-back
  56. [ 0.000000] A0000-BFFFF uncachable
  57. [ 0.000000] C0000-FFFFF write-protect
  58. [ 0.000000] MTRR variable ranges enabled:
  59. [ 0.000000] 0 base 00FF800000 mask 7FFF800000 write-protect
  60. [ 0.000000] 1 base 0000000000 mask 7F80000000 write-back
  61. [ 0.000000] 2 base 0080000000 mask 7FE0000000 write-back
  62. [ 0.000000] 3 base 009F000000 mask 7FFF000000 uncachable
  63. [ 0.000000] 4 base 0100000000 mask 7F00000000 write-back
  64. [ 0.000000] 5 base 0200000000 mask 7E00000000 write-back
  65. [ 0.000000] 6 base 0400000000 mask 7FC0000000 write-back
  66. [ 0.000000] 7 base 043F000000 mask 7FFF000000 uncachable
  67. [ 0.000000] 8 base 043EE00000 mask 7FFFE00000 uncachable
  68. [ 0.000000] 9 disabled
  69. [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
  70. [ 0.000000] e820: last_pfn = 0x9e000 max_arch_pfn = 0x400000000
  71. [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
  72. [ 0.000000] Using GB pages for direct mapping
  73. [ 0.000000] BRK [0x0203c000, 0x0203cfff] PGTABLE
  74. [ 0.000000] BRK [0x0203d000, 0x0203dfff] PGTABLE
  75. [ 0.000000] BRK [0x0203e000, 0x0203efff] PGTABLE
  76. [ 0.000000] BRK [0x0203f000, 0x0203ffff] PGTABLE
  77. [ 0.000000] BRK [0x02040000, 0x02040fff] PGTABLE
  78. [ 0.000000] RAMDISK: [mem 0x7dc9d000-0x7fffffff]
  79. [ 0.000000] ACPI: Early table checksum verification disabled
  80. [ 0.000000] ACPI: RSDP 0x000000009DFFE014 000024 (v02 HPQOEM)
  81. [ 0.000000] ACPI: XSDT 0x000000009DFFE120 0000AC (v01 HPQOEM SLIC-MPC 00000001 01000013)
  82. [ 0.000000] ACPI: FACP 0x000000009DFFC000 00010C (v05 HPQOEM 198F 00000001 HP 00000001)
  83. [ 0.000000] ACPI: DSDT 0x000000009DFD1000 02555B (v02 HPQOEM 198F 00000001 INTL 20110112)
  84. [ 0.000000] ACPI: FACS 0x000000009DDE4000 000040
  85. [ 0.000000] ACPI: FACS 0x000000009DDE4000 000040
  86. [ 0.000000] ACPI: HPET 0x000000009DFFB000 000038 (v01 HPQOEM 198F 00000001 HP 00000001)
  87. [ 0.000000] ACPI: APIC 0x000000009DFFA000 0000BC (v01 HPQOEM 198F 00000001 HP 00000001)
  88. [ 0.000000] ACPI: MCFG 0x000000009DFF9000 00003C (v01 HPQOEM 198F 00000001 HP 00000001)
  89. [ 0.000000] ACPI: TCPA 0x000000009DFF7000 000032 (v02 HPQOEM 198F 00000000 HP 00000001)
  90. [ 0.000000] ACPI: SSDT 0x000000009DFCE000 000313 (v01 HPQOEM SataAhci 00001000 INTL 20110112)
  91. [ 0.000000] ACPI: SSDT 0x000000009DFCD000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112)
  92. [ 0.000000] ACPI: SLIC 0x000000009DFCC000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
  93. [ 0.000000] ACPI: FPDT 0x000000009DFCA000 000044 (v01 HPQOEM 198F 00000001 HP 00000001)
  94. [ 0.000000] ACPI: BGRT 0x000000009DFC9000 000038 (v00 HPQOEM 198F 00000001 HP 00000001)
  95. [ 0.000000] ACPI: SSDT 0x000000009DFC5000 000466 (v01 Isct IsctAsl 00003000 INTL 20110112)
  96. [ 0.000000] ACPI: SSDT 0x000000009DFC4000 000544 (v01 PmRef Cpu0Ist 00003000 INTL 20110112)
  97. [ 0.000000] ACPI: SSDT 0x000000009DFC3000 000AF3 (v01 PmRef CpuPm 00003000 INTL 20110112)
  98. [ 0.000000] ACPI: SSDT 0x000000009DFC2000 0001D5 (v01 PmRef LakeTiny 00003000 INTL 20110112)
  99. [ 0.000000] ACPI: SSDT 0x000000009DFC1000 000706 (v01 SaSsdt SaSsdt 00003000 INTL 20110112)
  100. [ 0.000000] ACPI: ASF! 0x000000009DFF8000 0000A5 (v32 HPQOEM 198F 00000001 HP 00000001)
  101. [ 0.000000] ACPI: DMAR 0x000000009DFC0000 0000B0 (v01 INTEL HSW 00000001 INTL 00000001)
  102. [ 0.000000] ACPI: Local APIC address 0xfee00000
  103. [ 0.000000] Zone ranges:
  104. [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
  105. [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
  106. [ 0.000000] Normal [mem 0x0000000100000000-0x000000043edfffff]
  107. [ 0.000000] Movable zone start for each node
  108. [ 0.000000] Early memory node ranges
  109. [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
  110. [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009cfff]
  111. [ 0.000000] node 0: [mem 0x0000000000100000-0x000000009cb7efff]
  112. [ 0.000000] node 0: [mem 0x000000009dfff000-0x000000009dffffff]
  113. [ 0.000000] node 0: [mem 0x0000000100000000-0x000000043edfffff]
  114. [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000043edfffff]
  115. [ 0.000000] On node 0 totalpages: 4045083
  116. [ 0.000000] DMA zone: 64 pages used for memmap
  117. [ 0.000000] DMA zone: 21 pages reserved
  118. [ 0.000000] DMA zone: 3995 pages, LIFO batch:0
  119. [ 0.000000] DMA32 zone: 9966 pages used for memmap
  120. [ 0.000000] DMA32 zone: 637824 pages, LIFO batch:31
  121. [ 0.000000] Normal zone: 53176 pages used for memmap
  122. [ 0.000000] Normal zone: 3403264 pages, LIFO batch:31
  123. [ 0.000000] Reserving Intel graphics memory at 0x000000009f200000-0x00000000bf1fffff
  124. [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
  125. [ 0.000000] ACPI: Local APIC address 0xfee00000
  126. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
  127. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
  128. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
  129. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
  130. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
  131. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
  132. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
  133. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
  134. [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-39
  135. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  136. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  137. [ 0.000000] ACPI: IRQ0 used by override.
  138. [ 0.000000] ACPI: IRQ9 used by override.
  139. [ 0.000000] Using ACPI (MADT) for SMP configuration information
  140. [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
  141. [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
  142. [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
  143. [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
  144. [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
  145. [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
  146. [ 0.000000] PM: Registered nosave memory: [mem 0x91b6e000-0x91b6efff]
  147. [ 0.000000] PM: Registered nosave memory: [mem 0x91b77000-0x91b77fff]
  148. [ 0.000000] PM: Registered nosave memory: [mem 0x91b78000-0x91b78fff]
  149. [ 0.000000] PM: Registered nosave memory: [mem 0x91b88000-0x91b88fff]
  150. [ 0.000000] PM: Registered nosave memory: [mem 0x9cb7f000-0x9de7efff]
  151. [ 0.000000] PM: Registered nosave memory: [mem 0x9de7f000-0x9df7efff]
  152. [ 0.000000] PM: Registered nosave memory: [mem 0x9df7f000-0x9dffefff]
  153. [ 0.000000] PM: Registered nosave memory: [mem 0x9e000000-0x9f1fffff]
  154. [ 0.000000] PM: Registered nosave memory: [mem 0x9f200000-0xbf1fffff]
  155. [ 0.000000] PM: Registered nosave memory: [mem 0xbf200000-0xe00f7fff]
  156. [ 0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
  157. [ 0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff]
  158. [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
  159. [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffdaffff]
  160. [ 0.000000] PM: Registered nosave memory: [mem 0xffdb0000-0xffdcefff]
  161. [ 0.000000] PM: Registered nosave memory: [mem 0xffdcf000-0xffffffff]
  162. [ 0.000000] e820: [mem 0xbf200000-0xe00f7fff] available for PCI devices
  163. [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
  164. [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
  165. [ 0.000000] percpu: Embedded 35 pages/cpu @ffff88043ea00000 s103512 r8192 d31656 u262144
  166. [ 0.000000] pcpu-alloc: s103512 r8192 d31656 u262144 alloc=1*2097152
  167. [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
  168. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3981856
  169. [ 0.000000] Kernel command line: \\boot\kernel-genkernel-x86_64-4.9.76-gentoo-r1 ro root=/dev/sda6 initrd=boot\initramfs-genkernel-x86_64-4.9.76-gentoo-r1
  170. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  171. [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
  172. [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
  173. [ 0.000000] Memory: 15674244K/16180332K available (6562K kernel code, 1278K rwdata, 3048K rodata, 1424K init, 1592K bss, 506088K reserved, 0K cma-reserved)
  174. [ 0.000000] Kernel/User page tables isolation: enabled
  175. [ 0.000000] Hierarchical RCU implementation.
  176. [ 0.000000] Build-time adjustment of leaf fanout to 64.
  177. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
  178. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
  179. [ 0.000000] NR_IRQS:524544 nr_irqs:760 16
  180. [ 0.000000] Console: colour dummy device 80x25
  181. [ 0.000000] console [tty0] enabled
  182. [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
  183. [ 0.000000] hpet clockevent registered
  184. [ 0.000000] tsc: Fast TSC calibration using PIT
  185. [ 0.000000] tsc: Detected 2494.157 MHz processor
  186. [ 0.000029] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.31 BogoMIPS (lpj=2494157)
  187. [ 0.000038] pid_max: default: 32768 minimum: 301
  188. [ 0.000054] ACPI: Core revision 20160831
  189. [ 0.013614] ACPI: 8 ACPI AML tables successfully acquired and loaded
  190. [ 0.029571] Security Framework initialized
  191. [ 0.029579] SELinux: Initializing.
  192. [ 0.029593] SELinux: Starting in permissive mode
  193. [ 0.029614] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
  194. [ 0.029620] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
  195. [ 0.029921] CPU: Physical Processor ID: 0
  196. [ 0.029925] CPU: Processor Core ID: 0
  197. [ 0.029932] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
  198. [ 0.029936] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
  199. [ 0.029943] mce: CPU supports 7 MCE banks
  200. [ 0.029955] CPU0: Thermal monitoring enabled (TM1)
  201. [ 0.029972] process: using mwait in idle threads
  202. [ 0.029978] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
  203. [ 0.029982] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
  204. [ 0.030378] Freeing SMP alternatives memory: 28K
  205. [ 0.034476] ftrace: allocating 26414 entries in 104 pages
  206. [ 0.047137] smpboot: Max logical packages: 4
  207. [ 0.047757] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  208. [ 0.057767] TSC deadline timer enabled
  209. [ 0.057769] smpboot: CPU0: Intel(R) Core(TM) i5-4300U CPU @ 1.90GHz (family: 0x6, model: 0x45, stepping: 0x1)
  210. [ 0.057779] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
  211. [ 0.057837] ... version: 3
  212. [ 0.057840] ... bit width: 48
  213. [ 0.057843] ... generic registers: 4
  214. [ 0.057847] ... value mask: 0000ffffffffffff
  215. [ 0.057851] ... max period: 00007fffffffffff
  216. [ 0.057854] ... fixed-purpose events: 3
  217. [ 0.057857] ... event mask: 000000070000000f
  218. [ 0.058636] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
  219. [ 0.058761] x86: Booting SMP configuration:
  220. [ 0.058765] .... node #0, CPUs: #1 #2 #3
  221. [ 0.066583] x86: Booted up 1 node, 4 CPUs
  222. [ 0.066592] smpboot: Total of 4 processors activated (19953.25 BogoMIPS)
  223. [ 0.070892] devtmpfs: initialized
  224. [ 0.070958] x86/mm: Memory block size: 128MB
  225. [ 0.074275] PM: Registering ACPI NVS region [mem 0x9de7f000-0x9df7efff] (1048576 bytes)
  226. [ 0.074359] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
  227. [ 0.074369] futex hash table entries: 2048 (order: 5, 131072 bytes)
  228. [ 0.074611] NET: Registered protocol family 16
  229. [ 0.079462] cpuidle: using governor menu
  230. [ 0.079537] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
  231. [ 0.079543] ACPI: bus type PCI registered
  232. [ 0.079606] PCI: Using configuration type 1 for base access
  233. [ 0.079663] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
  234. [ 0.085598] HugeTLB registered 1 GB page size, pre-allocated 0 pages
  235. [ 0.085603] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  236. [ 0.085842] ACPI: Added _OSI(Module Device)
  237. [ 0.085848] ACPI: Added _OSI(Processor Device)
  238. [ 0.085852] ACPI: Added _OSI(3.0 _SCP Extensions)
  239. [ 0.085856] ACPI: Added _OSI(Processor Aggregator Device)
  240. [ 0.093613] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
  241. [ 0.100382] ACPI: Dynamic OEM Table Load:
  242. [ 0.100396] ACPI: SSDT 0xFFFF88042CA81C00 0003F3 (v01 PmRef Cpu0Cst 00003001 INTL 20110112)
  243. [ 0.100786] ACPI: Dynamic OEM Table Load:
  244. [ 0.100798] ACPI: SSDT 0xFFFF88042C414800 0005DB (v01 PmRef ApIst 00003000 INTL 20110112)
  245. [ 0.101230] ACPI: Dynamic OEM Table Load:
  246. [ 0.101239] ACPI: SSDT 0xFFFF88042D183E00 000119 (v01 PmRef ApCst 00003000 INTL 20110112)
  247. [ 0.102248] ACPI : EC: EC started
  248. [ 0.102254] ACPI : EC: interrupt blocked
  249. [ 1.540427] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
  250. [ 1.540433] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x6, EC_CMD/EC_SC=0x66, EC_DATA=0x62
  251. [ 1.540439] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
  252. [ 1.540445] ACPI: Interpreter enabled
  253. [ 1.540475] ACPI: (supports S0 S3 S4 S5)
  254. [ 1.540479] ACPI: Using IOAPIC for interrupt routing
  255. [ 1.540505] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
  256. [ 1.542033] ACPI: Power Resource [APPR] (off)
  257. [ 1.544360] ACPI: Power Resource [COMP] (on)
  258. [ 1.544574] ACPI: Power Resource [LPP] (on)
  259. [ 1.545953] ACPI: Power Resource [PXP6] (on)
  260. [ 1.651157] ACPI Exception: AE_ERROR, Returned by Handler for [PCI_Config] (20160831/evregion-300)
  261. [ 1.651167] ACPI Error: Method parse/execution failed [\_SB.PCI0.RP06.PXP6._ON] (Node ffff88042d1cd118), AE_ERROR (20160831/psparse-543)
  262. [ 1.653999] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
  263. [ 1.654009] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
  264. [ 1.654592] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
  265. [ 1.655033] PCI host bridge to bus 0000:00
  266. [ 1.655039] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
  267. [ 1.655044] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
  268. [ 1.655048] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
  269. [ 1.655055] pci_bus 0000:00: root bus resource [mem 0xbf200000-0xdfffffff window]
  270. [ 1.655060] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed3ffff window]
  271. [ 1.655066] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xfedfffff window]
  272. [ 1.655072] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff window]
  273. [ 1.655079] pci_bus 0000:00: root bus resource [bus 00-fe]
  274. [ 1.655091] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
  275. [ 1.655245] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
  276. [ 1.655257] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit]
  277. [ 1.655264] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
  278. [ 1.655269] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
  279. [ 1.655426] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
  280. [ 1.655434] pci 0000:00:03.0: reg 0x10: [mem 0xd0730000-0xd0733fff 64bit]
  281. [ 1.655590] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
  282. [ 1.655604] pci 0000:00:14.0: reg 0x10: [mem 0xd0720000-0xd072ffff 64bit]
  283. [ 1.655660] pci 0000:00:14.0: PME# supported from D3hot D3cold
  284. [ 1.655742] pci 0000:00:14.0: System wakeup disabled by ACPI
  285. [ 1.655786] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
  286. [ 1.655804] pci 0000:00:16.0: reg 0x10: [mem 0xd0739000-0xd073901f 64bit]
  287. [ 1.655880] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
  288. [ 1.655993] pci 0000:00:16.3: [8086:9c3d] type 00 class 0x070002
  289. [ 1.656006] pci 0000:00:16.3: reg 0x10: [io 0x30b0-0x30b7]
  290. [ 1.656013] pci 0000:00:16.3: reg 0x14: [mem 0xd073f000-0xd073ffff]
  291. [ 1.656189] pci 0000:00:19.0: [8086:155a] type 00 class 0x020000
  292. [ 1.656203] pci 0000:00:19.0: reg 0x10: [mem 0xd0700000-0xd071ffff]
  293. [ 1.656211] pci 0000:00:19.0: reg 0x14: [mem 0xd073e000-0xd073efff]
  294. [ 1.656218] pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f]
  295. [ 1.656280] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
  296. [ 1.656364] pci 0000:00:19.0: System wakeup disabled by ACPI
  297. [ 1.656407] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
  298. [ 1.656418] pci 0000:00:1b.0: reg 0x10: [mem 0xd0734000-0xd0737fff 64bit]
  299. [ 1.656477] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
  300. [ 1.656593] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
  301. [ 1.656665] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
  302. [ 1.656826] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
  303. [ 1.656900] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
  304. [ 1.657020] pci 0000:00:1c.3: System wakeup disabled by ACPI
  305. [ 1.657062] pci 0000:00:1c.5: [8086:9c1a] type 01 class 0x060400
  306. [ 1.657129] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
  307. [ 1.657296] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
  308. [ 1.657311] pci 0000:00:1d.0: reg 0x10: [mem 0xd073d000-0xd073d3ff]
  309. [ 1.657389] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
  310. [ 1.657474] pci 0000:00:1d.0: System wakeup disabled by ACPI
  311. [ 1.657518] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
  312. [ 1.657743] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
  313. [ 1.657756] pci 0000:00:1f.2: reg 0x10: [io 0x30a8-0x30af]
  314. [ 1.657763] pci 0000:00:1f.2: reg 0x14: [io 0x30bc-0x30bf]
  315. [ 1.657769] pci 0000:00:1f.2: reg 0x18: [io 0x30a0-0x30a7]
  316. [ 1.657776] pci 0000:00:1f.2: reg 0x1c: [io 0x30b8-0x30bb]
  317. [ 1.657783] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
  318. [ 1.657789] pci 0000:00:1f.2: reg 0x24: [mem 0xd073c000-0xd073c7ff]
  319. [ 1.657829] pci 0000:00:1f.2: PME# supported from D3hot
  320. [ 1.657939] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
  321. [ 1.657951] pci 0000:00:1f.3: reg 0x10: [mem 0xd0738000-0xd07380ff 64bit]
  322. [ 1.657965] pci 0000:00:1f.3: reg 0x20: [io 0xef80-0xef9f]
  323. [ 1.658129] pci 0000:00:1c.0: PCI bridge to [bus 01]
  324. [ 1.658137] pci 0000:00:1c.0: bridge window [mem 0xd0600000-0xd06fffff]
  325. [ 1.658235] pci 0000:02:00.0: [14e4:4357] type 00 class 0x028000
  326. [ 1.658254] pci 0000:02:00.0: reg 0x10: [mem 0xd0500000-0xd0503fff 64bit]
  327. [ 1.658367] pci 0000:02:00.0: supports D1 D2
  328. [ 1.658393] pci 0000:02:00.0: System wakeup disabled by ACPI
  329. [ 1.661213] pci 0000:00:1c.3: PCI bridge to [bus 02]
  330. [ 1.661221] pci 0000:00:1c.3: bridge window [mem 0xd0500000-0xd05fffff]
  331. [ 1.661278] pci 0000:03:00.0: [10ec:5227] type 00 class 0xff0000
  332. [ 1.661293] pci 0000:03:00.0: reg 0x10: [mem 0xd0400000-0xd0400fff]
  333. [ 1.661420] pci 0000:03:00.0: supports D1 D2
  334. [ 1.661421] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
  335. [ 1.664187] pci 0000:00:1c.5: PCI bridge to [bus 03]
  336. [ 1.664195] pci 0000:00:1c.5: bridge window [mem 0xd0400000-0xd04fffff]
  337. [ 1.664214] pci_bus 0000:00: on NUMA node 0
  338. [ 1.665253] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
  339. [ 1.665313] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
  340. [ 1.665369] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
  341. [ 1.665425] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
  342. [ 1.665481] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
  343. [ 1.665536] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
  344. [ 1.665592] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
  345. [ 1.665647] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
  346. [ 1.666066] ACPI: Enabled 5 GPEs in block 00 to 7F
  347. [ 1.666132] ACPI : EC: interrupt unblocked
  348. [ 1.666143] ACPI : EC: event unblocked
  349. [ 1.666152] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x6, EC_CMD/EC_SC=0x66, EC_DATA=0x62
  350. [ 1.666159] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
  351. [ 1.666240] vgaarb: setting as boot device: PCI:0000:00:02.0
  352. [ 1.666245] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
  353. [ 1.666252] vgaarb: loaded
  354. [ 1.666256] vgaarb: bridge control possible 0000:00:02.0
  355. [ 1.666330] SCSI subsystem initialized
  356. [ 1.666381] libata version 3.00 loaded.
  357. [ 1.666408] ACPI: bus type USB registered
  358. [ 1.666430] usbcore: registered new interface driver usbfs
  359. [ 1.666443] usbcore: registered new interface driver hub
  360. [ 1.666465] usbcore: registered new device driver usb
  361. [ 1.666545] Registered efivars operations
  362. [ 1.861640] PCI: Using ACPI for IRQ routing
  363. [ 1.861645] PCI: pci_cache_line_size set to 64 bytes
  364. [ 1.861716] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
  365. [ 1.861718] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
  366. [ 1.861719] e820: reserve RAM buffer [mem 0x91b6e018-0x93ffffff]
  367. [ 1.861720] e820: reserve RAM buffer [mem 0x91b78018-0x93ffffff]
  368. [ 1.861721] e820: reserve RAM buffer [mem 0x9cb7f000-0x9fffffff]
  369. [ 1.861722] e820: reserve RAM buffer [mem 0x9e000000-0x9fffffff]
  370. [ 1.861723] e820: reserve RAM buffer [mem 0x43ee00000-0x43fffffff]
  371. [ 1.861827] NetLabel: Initializing
  372. [ 1.861831] NetLabel: domain hash size = 128
  373. [ 1.861834] NetLabel: protocols = UNLABELED CIPSOv4
  374. [ 1.861854] NetLabel: unlabeled traffic allowed by default
  375. [ 1.861944] clocksource: Switched to clocksource hpet
  376. [ 1.869198] VFS: Disk quotas dquot_6.6.0
  377. [ 1.869225] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  378. [ 1.870897] pnp: PnP ACPI init
  379. [ 1.871143] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
  380. [ 1.871149] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
  381. [ 1.871154] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
  382. [ 1.871158] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
  383. [ 1.871163] system 00:00: [mem 0xe0000000-0xefffffff] could not be reserved
  384. [ 1.871168] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
  385. [ 1.871172] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
  386. [ 1.871177] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
  387. [ 1.871182] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
  388. [ 1.871186] system 00:00: [mem 0xbf210000-0xbf21ffff] has been reserved
  389. [ 1.871193] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
  390. [ 1.871360] system 00:01: [io 0x0200-0x027f] has been reserved
  391. [ 1.871365] system 00:01: [io 0xffff] has been reserved
  392. [ 1.871369] system 00:01: [io 0xffff] has been reserved
  393. [ 1.871374] system 00:01: [io 0xffff] has been reserved
  394. [ 1.871379] system 00:01: [io 0x1800-0x18fe] has been reserved
  395. [ 1.871383] system 00:01: [io 0xef80-0xef9f] has been reserved
  396. [ 1.871389] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
  397. [ 1.871435] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
  398. [ 1.871601] pnp 00:03: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
  399. [ 1.871624] pnp 00:04: Plug and Play ACPI device, IDs SYN3003 SYN0100 SYN0002 PNP0f13 (active)
  400. [ 1.871933] system 00:05: [mem 0x20000000-0x201fffff] could not be reserved
  401. [ 1.871938] system 00:05: [mem 0x40004000-0x40004fff] could not be reserved
  402. [ 1.871950] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
  403. [ 1.872241] pnp 00:06: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
  404. [ 1.872259] pnp: PnP ACPI: found 7 devices
  405. [ 1.876796] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
  406. [ 1.876826] pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
  407. [ 1.876828] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
  408. [ 1.876833] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
  409. [ 1.876835] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
  410. [ 1.876836] pci 0000:00:1c.5: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
  411. [ 1.876838] pci 0000:00:1c.5: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
  412. [ 1.876846] pci 0000:00:1c.5: BAR 15: assigned [mem 0xbf300000-0xbf4fffff 64bit pref]
  413. [ 1.876853] pci 0000:00:1c.5: BAR 13: assigned [io 0x2000-0x2fff]
  414. [ 1.876858] pci 0000:00:1c.0: PCI bridge to [bus 01]
  415. [ 1.876866] pci 0000:00:1c.0: bridge window [mem 0xd0600000-0xd06fffff]
  416. [ 1.876877] pci 0000:00:1c.3: PCI bridge to [bus 02]
  417. [ 1.876883] pci 0000:00:1c.3: bridge window [mem 0xd0500000-0xd05fffff]
  418. [ 1.876893] pci 0000:00:1c.5: PCI bridge to [bus 03]
  419. [ 1.876898] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
  420. [ 1.876905] pci 0000:00:1c.5: bridge window [mem 0xd0400000-0xd04fffff]
  421. [ 1.876911] pci 0000:00:1c.5: bridge window [mem 0xbf300000-0xbf4fffff 64bit pref]
  422. [ 1.876922] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
  423. [ 1.876923] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
  424. [ 1.876925] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
  425. [ 1.876926] pci_bus 0000:00: resource 7 [mem 0xbf200000-0xdfffffff window]
  426. [ 1.876927] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfed3ffff window]
  427. [ 1.876928] pci_bus 0000:00: resource 9 [mem 0xfed45000-0xfedfffff window]
  428. [ 1.876929] pci_bus 0000:00: resource 10 [mem 0xfee01000-0xffffffff window]
  429. [ 1.876931] pci_bus 0000:01: resource 1 [mem 0xd0600000-0xd06fffff]
  430. [ 1.876933] pci_bus 0000:02: resource 1 [mem 0xd0500000-0xd05fffff]
  431. [ 1.876934] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
  432. [ 1.876935] pci_bus 0000:03: resource 1 [mem 0xd0400000-0xd04fffff]
  433. [ 1.876936] pci_bus 0000:03: resource 2 [mem 0xbf300000-0xbf4fffff 64bit pref]
  434. [ 1.877075] NET: Registered protocol family 2
  435. [ 1.877252] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  436. [ 1.877437] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  437. [ 1.877569] TCP: Hash tables configured (established 131072 bind 65536)
  438. [ 1.877592] UDP hash table entries: 8192 (order: 6, 262144 bytes)
  439. [ 1.877635] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
  440. [ 1.877722] NET: Registered protocol family 1
  441. [ 1.877740] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
  442. [ 1.877752] pci 0000:00:14.0: enabling device (0000 -> 0002)
  443. [ 1.878048] pci 0000:00:1d.0: enabling device (0000 -> 0002)
  444. [ 1.878315] PCI: CLS 64 bytes, default 64
  445. [ 1.878367] Trying to unpack rootfs image as initramfs...
  446. [ 7.579166] Freeing initrd memory: 36236K
  447. [ 7.579176] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
  448. [ 7.579182] software IO TLB [mem 0x94288000-0x98288000] (64MB) mapped at [ffff880094288000-ffff880098287fff]
  449. [ 7.579274] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
  450. [ 7.579280] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
  451. [ 7.579284] RAPL PMU: hw unit of domain package 2^-14 Joules
  452. [ 7.579288] RAPL PMU: hw unit of domain dram 2^-14 Joules
  453. [ 7.579292] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
  454. [ 7.579748] audit: initializing netlink subsys (disabled)
  455. [ 7.579773] audit: type=2000 audit(1520762222.553:1): initialized
  456. [ 7.580211] Initialise system trusted keyrings
  457. [ 7.580328] workingset: timestamp_bits=46 max_order=22 bucket_order=0
  458. [ 7.580558] SELinux: Registering netfilter hooks
  459. [ 7.581681] Key type asymmetric registered
  460. [ 7.581686] Asymmetric key parser 'x509' registered
  461. [ 7.581709] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
  462. [ 7.581748] io scheduler noop registered
  463. [ 7.581752] io scheduler deadline registered
  464. [ 7.581760] io scheduler cfq registered (default)
  465. [ 7.582357] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  466. [ 7.582639] serial 0000:00:16.3: enabling device (0000 -> 0003)
  467. [ 7.603125] 0000:00:16.3: ttyS0 at I/O 0x30b0 (irq = 19, base_baud = 115200) is a 16550A
  468. [ 7.638165] tpm_tis 00:06: 1.2 TPM (device-id 0xB, rev-id 16)
  469. [ 7.877175] efifb: probing for efifb
  470. [ 7.877188] efifb: framebuffer at 0xc0000000, using 5628k, total 5625k
  471. [ 7.877193] efifb: mode is 1600x900x32, linelength=6400, pages=1
  472. [ 7.877196] efifb: scrolling: redraw
  473. [ 7.877200] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
  474. [ 7.880766] Console: switching to colour frame buffer device 200x56
  475. [ 7.884011] fb0: EFI VGA frame buffer device
  476. [ 7.884037] intel_idle: MWAIT substates: 0x11142120
  477. [ 7.884038] intel_idle: v0.4.1 model 0x45
  478. [ 7.884281] intel_idle: lapic_timer_reliable_states 0xffffffff
  479. [ 7.884288] ipmi message handler version 39.2
  480. [ 7.884319] IPMI System Interface driver.
  481. [ 7.884362] ipmi_si: Unable to find any System Interface(s)
  482. [ 8.312222] ACPI: AC Adapter [AC] (off-line)
  483. [ 8.312315] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
  484. [ 8.312352] ACPI: Sleep Button [SLPB]
  485. [ 8.312430] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
  486. [ 8.312483] ACPI: Lid Switch [LID]
  487. [ 8.312537] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
  488. [ 8.312568] ACPI: Power Button [PWRF]
  489. [ 8.337088] thermal LNXTHERM:00: registered as thermal_zone0
  490. [ 8.337132] ACPI: Thermal Zone [CPUZ] (48 C)
  491. [ 8.361329] thermal LNXTHERM:01: registered as thermal_zone1
  492. [ 8.361362] ACPI: Thermal Zone [GFXZ] (0 C)
  493. [ 8.376512] thermal LNXTHERM:02: registered as thermal_zone2
  494. [ 8.376544] ACPI: Thermal Zone [EXTZ] (35 C)
  495. [ 8.391660] thermal LNXTHERM:03: registered as thermal_zone3
  496. [ 8.391692] ACPI: Thermal Zone [LOCZ] (36 C)
  497. [ 8.406872] thermal LNXTHERM:04: registered as thermal_zone4
  498. [ 8.406904] ACPI: Thermal Zone [BATZ] (32 C)
  499. [ 8.407302] thermal LNXTHERM:05: registered as thermal_zone5
  500. [ 8.407329] ACPI: Thermal Zone [PCHZ] (0 C)
  501. [ 8.407395] GHES: HEST is not enabled!
  502. [ 8.410302] brd: module loaded
  503. [ 8.411810] loop: module loaded
  504. [ 8.412744] ahci 0000:00:1f.2: version 3.0
  505. [ 8.423044] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x1 impl SATA mode
  506. [ 8.424077] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
  507. [ 8.425622] scsi host0: ahci
  508. [ 8.426376] ACPI: Battery Slot [BAT0] (battery present)
  509. [ 8.426522] ACPI: Battery Slot [BAT1] (battery absent)
  510. [ 8.428889] scsi host1: ahci
  511. [ 8.429868] ata1: SATA max UDMA/133 abar m2048@0xd073c000 port 0xd073c100 irq 40
  512. [ 8.430816] ata2: DUMMY
  513. [ 8.431905] libphy: Fixed MDIO Bus: probed
  514. [ 8.432990] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  515. [ 8.433939] ehci-pci: EHCI PCI platform driver
  516. [ 8.435031] ehci-pci 0000:00:1d.0: EHCI Host Controller
  517. [ 8.436115] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
  518. [ 8.437091] ehci-pci 0000:00:1d.0: debug port 2
  519. [ 8.441981] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
  520. [ 8.441993] ehci-pci 0000:00:1d.0: irq 17, io mem 0xd073d000
  521. [ 8.449151] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
  522. [ 8.450117] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  523. [ 8.451043] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  524. [ 8.451965] usb usb1: Product: EHCI Host Controller
  525. [ 8.452879] usb usb1: Manufacturer: Linux 4.9.76-gentoo-r1 ehci_hcd
  526. [ 8.453803] usb usb1: SerialNumber: 0000:00:1d.0
  527. [ 8.454860] hub 1-0:1.0: USB hub found
  528. [ 8.455780] hub 1-0:1.0: 3 ports detected
  529. [ 8.456833] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  530. [ 8.457748] ohci-pci: OHCI PCI platform driver
  531. [ 8.458657] uhci_hcd: USB Universal Host Controller Interface driver
  532. [ 8.459617] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
  533. [ 8.461748] i8042: Detected active multiplexing controller, rev 1.1
  534. [ 8.463279] serio: i8042 KBD port at 0x60,0x64 irq 1
  535. [ 8.464212] serio: i8042 AUX0 port at 0x60,0x64 irq 12
  536. [ 8.465162] serio: i8042 AUX1 port at 0x60,0x64 irq 12
  537. [ 8.466079] serio: i8042 AUX2 port at 0x60,0x64 irq 12
  538. [ 8.466977] serio: i8042 AUX3 port at 0x60,0x64 irq 12
  539. [ 8.467940] mousedev: PS/2 mouse device common for all mice
  540. [ 8.468966] rtc_cmos 00:02: RTC can wake from S4
  541. [ 8.469975] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
  542. [ 8.470840] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
  543. [ 8.471693] intel_pstate: Intel P-state driver initializing
  544. [ 8.472719] hidraw: raw HID events driver (C) Jiri Kosina
  545. [ 8.474799] usbcore: registered new interface driver usbhid
  546. [ 8.476700] usbhid: USB HID core driver
  547. [ 8.478812] drop_monitor: Initializing network drop monitor service
  548. [ 8.480894] Initializing XFRM netlink socket
  549. [ 8.483290] NET: Registered protocol family 10
  550. [ 8.485695] NET: Registered protocol family 17
  551. [ 8.487713] microcode: sig=0x40651, pf=0x40, revision=0x1c
  552. [ 8.489171] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
  553. [ 8.490785] registered taskstats version 1
  554. [ 8.492193] Loading compiled-in X.509 certificates
  555. [ 8.494777] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
  556. [ 8.505762] Loaded X.509 cert 'Build time autogenerated kernel key: b75cedb83ca071039b80817490742f2d44a01689'
  557. [ 8.520271] Key type encrypted registered
  558. [ 8.632200] tsc: Refined TSC clocksource calibration: 2494.227 MHz
  559. [ 8.633061] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f3ec29a0f, max_idle_ns: 440795214066 ns
  560. [ 8.742323] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  561. [ 8.743501] ata1.00: ATA-9: OCZ-TRION100, SAFM11.2, max UDMA/133
  562. [ 8.744392] ata1.00: 937703088 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
  563. [ 8.745425] ata1.00: configured for UDMA/133
  564. [ 8.746162] scsi 0:0:0:0: Direct-Access ATA OCZ-TRION100 11.2 PQ: 0 ANSI: 5
  565. [ 8.768197] usb 1-1: new high-speed USB device number 2 using ehci-pci
  566. [ 8.873512] random: fast init done
  567. [ 8.887818] usb 1-1: New USB device found, idVendor=8087, idProduct=8000
  568. [ 8.888743] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  569. [ 8.889966] hub 1-1:1.0: USB hub found
  570. [ 8.890675] hub 1-1:1.0: 8 ports detected
  571. [ 8.892435] rtc_cmos 00:02: setting system clock to 2018-03-11 09:57:04 UTC (1520762224)
  572. [ 8.894050] Freeing unused kernel memory: 1424K
  573. [ 8.894726] Write protecting the kernel read-only data: 12288k
  574. [ 8.895724] Freeing unused kernel memory: 1608K
  575. [ 8.898116] Freeing unused kernel memory: 1048K
  576. [ 9.244141] sd 0:0:0:0: [sda] 937703088 512-byte logical blocks: (480 GB/447 GiB)
  577. [ 9.244202] sd 0:0:0:0: [sda] Write Protect is off
  578. [ 9.244205] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  579. [ 9.244233] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  580. [ 9.246255] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
  581. [ 9.246769] sd 0:0:0:0: [sda] Attached SCSI disk
  582. [ 9.251403] sd 0:0:0:0: Attached scsi generic sg0 type 0
  583. [ 9.400713] input: PS/2 Generic Mouse as /devices/platform/i8042/serio2/input/input9
  584. [ 9.402478] imm: Version 2.05 (for Linux 2.4.0)
  585. [ 9.453923] Fusion MPT base driver 3.04.20
  586. [ 9.453924] Copyright (c) 1999-2008 LSI Corporation
  587. [ 9.461389] Fusion MPT SPI Host driver 3.04.20
  588. [ 9.467812] Fusion MPT FC Host driver 3.04.20
  589. [ 9.474721] Fusion MPT SAS Host driver 3.04.20
  590. [ 9.478592] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
  591. [ 9.482358] 3ware Storage Controller device driver for Linux v1.26.02.003.
  592. [ 9.485919] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
  593. [ 9.495375] HP CISS Driver (v 3.6.26)
  594. [ 9.519541] Adaptec aacraid driver 1.2-1[41066]-ms
  595. [ 9.527334] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
  596. [ 9.529761] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
  597. [ 9.538057] megasas: 06.811.02.00-rc1
  598. [ 9.573963] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.38-k.
  599. [ 9.599092] Emulex LightPulse Fibre Channel SCSI driver 11.2.0.0.
  600. [ 9.599093] Copyright(c) 2004-2016 Emulex. All rights reserved.
  601. [ 9.623761] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
  602. [ 9.640224] clocksource: Switched to clocksource tsc
  603. [ 9.658592] usbcore: registered new interface driver usb-storage
  604. [ 9.679643] xhci_hcd 0000:00:14.0: xHCI Host Controller
  605. [ 9.679686] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
  606. [ 9.680752] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810
  607. [ 9.680756] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
  608. [ 9.680828] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  609. [ 9.680829] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  610. [ 9.680830] usb usb2: Product: xHCI Host Controller
  611. [ 9.680831] usb usb2: Manufacturer: Linux 4.9.76-gentoo-r1 xhci-hcd
  612. [ 9.680832] usb usb2: SerialNumber: 0000:00:14.0
  613. [ 9.680925] hub 2-0:1.0: USB hub found
  614. [ 9.680936] hub 2-0:1.0: 9 ports detected
  615. [ 9.681676] xhci_hcd 0000:00:14.0: xHCI Host Controller
  616. [ 9.681779] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
  617. [ 9.681817] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
  618. [ 9.681818] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  619. [ 9.681820] usb usb3: Product: xHCI Host Controller
  620. [ 9.681821] usb usb3: Manufacturer: Linux 4.9.76-gentoo-r1 xhci-hcd
  621. [ 9.681822] usb usb3: SerialNumber: 0000:00:14.0
  622. [ 9.681910] hub 3-0:1.0: USB hub found
  623. [ 9.681919] hub 3-0:1.0: 4 ports detected
  624. [ 9.682256] usb: port power management may be unreliable
  625. [ 9.815003] device-mapper: uevent: version 1.0.3
  626. [ 9.815060] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
  627. [ 9.870184] raid6: sse2x1 gen() 8625 MB/s
  628. [ 9.887179] raid6: sse2x1 xor() 6673 MB/s
  629. [ 9.904184] raid6: sse2x2 gen() 10492 MB/s
  630. [ 9.921174] raid6: sse2x2 xor() 7263 MB/s
  631. [ 9.938182] raid6: sse2x4 gen() 12617 MB/s
  632. [ 9.955168] raid6: sse2x4 xor() 8880 MB/s
  633. [ 9.972168] raid6: avx2x1 gen() 16824 MB/s
  634. [ 9.989171] raid6: avx2x2 gen() 19175 MB/s
  635. [ 10.006172] raid6: avx2x4 gen() 22101 MB/s
  636. [ 10.006173] raid6: using algorithm avx2x4 gen() 22101 MB/s
  637. [ 10.006174] raid6: using avx2x2 recovery algorithm
  638. [ 10.007795] async_tx: api initialized (async)
  639. [ 10.009277] xor: automatically using best checksumming function avx
  640. [ 10.022596] md: raid6 personality registered for level 6
  641. [ 10.022598] md: raid5 personality registered for level 5
  642. [ 10.022598] md: raid4 personality registered for level 4
  643. [ 10.024835] device-mapper: raid: Loading target version 1.9.1
  644. [ 10.029610] md: raid0 personality registered for level 0
  645. [ 10.033603] md: raid1 personality registered for level 1
  646. [ 10.044180] usb 2-3: new high-speed USB device number 2 using xhci_hcd
  647. [ 10.048788] md: raid10 personality registered for level 10
  648. [ 10.052155] md: linear personality registered for level -1
  649. [ 10.172749] Btrfs loaded, crc32c=crc32c-generic
  650. [ 10.182482] usb 2-3: New USB device found, idVendor=0424, idProduct=2134
  651. [ 10.182485] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  652. [ 10.182487] usb 2-3: Product: USB2134B
  653. [ 10.182488] usb 2-3: Manufacturer: SMSC
  654. [ 10.182842] hub 2-3:1.0: USB hub found
  655. [ 10.182858] hub 2-3:1.0: 4 ports detected
  656. [ 10.190693] psmouse serio3: synaptics: queried max coordinates: x [..5672], y [..4764]
  657. [ 10.208720] JFS: nTxBlock = 8192, nTxLock = 65536
  658. [ 10.218648] FS-Cache: Loaded
  659. [ 10.224238] psmouse serio3: synaptics: queried min coordinates: x [1360..], y [1160..]
  660. [ 10.250893] RPC: Registered named UNIX socket transport module.
  661. [ 10.250894] RPC: Registered udp transport module.
  662. [ 10.250894] RPC: Registered tcp transport module.
  663. [ 10.250895] RPC: Registered tcp NFSv4.1 backchannel transport module.
  664. [ 10.281152] psmouse serio3: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x26800/0x0, board id: 2768, fw id: 1478018
  665. [ 10.286235] usb 3-3: new SuperSpeed USB device number 2 using xhci_hcd
  666. [ 10.299561] usb 3-3: New USB device found, idVendor=0424, idProduct=5534
  667. [ 10.299563] usb 3-3: New USB device strings: Mfr=2, Product=3, SerialNumber=0
  668. [ 10.299564] usb 3-3: Product: USB5534B
  669. [ 10.299565] usb 3-3: Manufacturer: SMSC
  670. [ 10.300120] hub 3-3:1.0: USB hub found
  671. [ 10.300295] hub 3-3:1.0: 4 ports detected
  672. [ 10.300427] FS-Cache: Netfs 'nfs' registered for caching
  673. [ 10.395630] SGI XFS with ACLs, security attributes, no debug enabled
  674. [ 10.397208] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input10
  675. [ 10.410683] fuse init (API version 7.26)
  676. [ 10.430499] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
  677. [ 10.430500] e1000: Copyright (c) 1999-2006 Intel Corporation.
  678. [ 10.439379] dca service started, version 1.12.1
  679. [ 10.441994] pps_core: LinuxPPS API ver. 1 registered
  680. [ 10.441995] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  681. [ 10.445004] PTP clock support registered
  682. [ 10.455230] usb 2-4: new full-speed USB device number 3 using xhci_hcd
  683. [ 10.458160] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
  684. [ 10.458161] igb: Copyright (c) 2007-2014 Intel Corporation.
  685. [ 10.491718] VMware vmxnet3 virtual NIC driver - version 1.4.a.0-k-NAPI
  686. [ 10.499409] Loading iSCSI transport class v2.0-870.
  687. [ 10.511167] iscsi: registered transport (tcp)
  688. [ 10.606037] EXT2-fs (sda6): error: couldn't mount because of unsupported optional features (240)
  689. [ 10.606202] EXT4-fs (sda6): couldn't mount as ext3 due to feature incompatibilities
  690. [ 10.609247] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
  691. [ 10.627630] usb 2-4: New USB device found, idVendor=045e, idProduct=07b2
  692. [ 10.627632] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  693. [ 10.627634] usb 2-4: Product: Microsoft® Nano Transceiver v1.0
  694. [ 10.627635] usb 2-4: Manufacturer: Microsoft
  695. [ 10.631293] input: Microsoft Microsoft® Nano Transceiver v1.0 as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.0/0003:045E:07B2.0001/input/input12
  696. [ 10.683436] hid-generic 0003:045E:07B2.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® Nano Transceiver v1.0] on usb-0000:00:14.0-4/input0
  697. [ 10.687730] input: Microsoft Microsoft® Nano Transceiver v1.0 as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.1/0003:045E:07B2.0002/input/input13
  698. [ 10.687843] hid-generic 0003:045E:07B2.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® Nano Transceiver v1.0] on usb-0000:00:14.0-4/input1
  699. [ 10.701208] usb 2-3.2: new full-speed USB device number 4 using xhci_hcd
  700. [ 10.702700] input: Microsoft Microsoft® Nano Transceiver v1.0 as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.2/0003:045E:07B2.0003/input/input14
  701. [ 10.755370] hid-generic 0003:045E:07B2.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® Nano Transceiver v1.0] on usb-0000:00:14.0-4/input2
  702. [ 10.793688] usb 2-3.2: New USB device found, idVendor=0a5c, idProduct=217d
  703. [ 10.793689] usb 2-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  704. [ 10.793691] usb 2-3.2: Product: HP Bluetooth Module
  705. [ 10.793692] usb 2-3.2: Manufacturer: Broadcom Corp
  706. [ 10.793692] usb 2-3.2: SerialNumber: 68A3C45289B6
  707. [ 10.947214] usb 2-7: new high-speed USB device number 5 using xhci_hcd
  708. [ 11.201265] usb 2-7: New USB device found, idVendor=05c8, idProduct=0369
  709. [ 11.201267] usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  710. [ 11.201268] usb 2-7: Product: HP HD Webcam
  711. [ 11.201269] usb 2-7: Manufacturer: SunplusIT INC.
  712. [ 11.777036] cgroup: cgroup2: unknown option "nsdelegate"
  713. [ 11.851887] udevd[2376]: starting version 3.2.5
  714. [ 11.886109] udevd[2377]: starting eudev-3.2.5
  715. [ 11.985717] Initializing HPQ6001 module
  716. [ 11.985772] input: HP Wireless hotkeys as /devices/virtual/input/input15
  717. [ 12.011954] wmi: Mapper loaded
  718. [ 12.021084] hp_accel: hardware type HPB64xx found
  719. [ 12.035613] Linux agpgart interface v0.103
  720. [ 12.060127] i801_smbus 0000:00:1f.3: enabling device (0000 -> 0003)
  721. [ 12.060316] i801_smbus 0000:00:1f.3: SPD Write Disable is set
  722. [ 12.060339] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
  723. [ 12.064660] bcma-pci-bridge 0000:02:00.0: enabling device (0000 -> 0002)
  724. [ 12.064736] bcma: bus0: Found chip with id 43225, rev 0x01 and package 0x0A
  725. [ 12.064759] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
  726. [ 12.064778] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
  727. [ 12.064815] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
  728. [ 12.077326] bcma: bus0: Bus registered
  729. [ 12.131269] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  730. [ 12.131270] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  731. [ 12.131526] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
  732. [ 12.149773] Linux video capture interface: v2.00
  733. [ 12.163081] input: PC Speaker as /devices/platform/pcspkr/input/input16
  734. [ 12.194657] lis3lv02d: 8 bits 3DC sensor found
  735. [ 12.202454] Bluetooth: Core ver 2.22
  736. [ 12.202472] NET: Registered protocol family 31
  737. [ 12.202473] Bluetooth: HCI device and connection manager initialized
  738. [ 12.202476] Bluetooth: HCI socket layer initialized
  739. [ 12.202479] Bluetooth: L2CAP socket layer initialized
  740. [ 12.202490] Bluetooth: SCO socket layer initialized
  741. [ 12.274782] usbcore: registered new interface driver btusb
  742. [ 12.284793] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
  743. [ 12.314873] uvcvideo: Found UVC 1.00 device HP HD Webcam (05c8:0369)
  744. [ 12.325661] input: HP HD Webcam as /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/input/input17
  745. [ 12.325799] usbcore: registered new interface driver uvcvideo
  746. [ 12.325800] USB Video Class driver (1.1.1)
  747. [ 12.352115] [drm] Initialized
  748. [ 12.408668] iTCO_vendor_support: vendor-support=0
  749. [ 12.417182] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) a0:2b:b8:2c:68:07
  750. [ 12.417184] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
  751. [ 12.417226] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
  752. [ 12.417295] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
  753. [ 12.417496] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
  754. [ 12.421232] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
  755. [ 12.421271] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
  756. [ 12.431102] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
  757. [ 12.434005] ppdev: user-space parallel port driver
  758. [ 12.447053] e1000e 0000:00:19.0 enp0s25: renamed from eth0
  759. [ 12.481901] snd_hda_codec_idt hdaudioC2D0: autoconfig for 92HD91BXX: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line
  760. [ 12.481903] snd_hda_codec_idt hdaudioC2D0: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
  761. [ 12.481905] snd_hda_codec_idt hdaudioC2D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
  762. [ 12.481906] snd_hda_codec_idt hdaudioC2D0: mono: mono_out=0x0
  763. [ 12.481907] snd_hda_codec_idt hdaudioC2D0: inputs:
  764. [ 12.481909] snd_hda_codec_idt hdaudioC2D0: Mic=0xc
  765. [ 12.481911] snd_hda_codec_idt hdaudioC2D0: Internal Mic=0x11
  766. [ 12.481912] snd_hda_codec_idt hdaudioC2D0: Line=0xf
  767. [ 12.485444] input: HP WMI hotkeys as /devices/virtual/input/input18
  768. [ 12.508805] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card2/input19
  769. [ 12.509447] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card2/input20
  770. [ 12.509516] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card2/input21
  771. [ 12.509572] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card2/input22
  772. [ 12.509631] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card2/input23
  773. [ 12.765435] [drm] Memory usable by graphics device = 2048M
  774. [ 12.765437] checking generic (c0000000 57f000) vs hw (c0000000 10000000)
  775. [ 12.765438] fb: switching to inteldrmfb from EFI VGA
  776. [ 12.765464] Console: switching to colour dummy device 80x25
  777. [ 12.765537] [drm] Replacing VGA console driver
  778. [ 12.791304] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  779. [ 12.791305] [drm] Driver supports precise vblank timestamp query.
  780. [ 12.793494] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
  781. [ 12.912388] Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1
  782. [ 12.912392] b43: probe of bcma0:1 failed with error -524
  783. [ 12.912409] Broadcom 43xx driver loaded [ Features: PNLS ]
  784. [ 12.967065] brcmsmac bcma0:1: mfg 4bf core 812 rev 23 class 0 irq 19
  785. [ 12.973132] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  786. [ 12.975102] brcmsmac bcma0:1 wlp2s0b1: renamed from wlan0
  787. [ 13.393391] EXT4-fs (sda6): re-mounted. Opts: (null)
  788. [ 13.512637] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
  789. [ 13.567338] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input24
  790. [ 13.569019] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
  791. [ 13.569276] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input25
  792. [ 13.569408] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
  793. [ 13.569416] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
  794. [ 13.571864] fbcon: inteldrmfb (fb0) is primary device
  795. [ 14.710202] Console: switching to colour frame buffer device 200x56
  796. [ 14.733185] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
  797. [ 14.756547] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card1/input26
  798. [ 14.756619] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card1/input27
  799. [ 14.756705] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card1/input28
  800. [ 15.490548] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
  801. [ 15.696543] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
  802. [ 15.701783] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
  803. [ 15.726978] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
  804. [ 15.726985] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
  805. [ 15.727962] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
  806. [ 15.755700] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
  807. [ 15.755706] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
  808. [ 15.756693] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
  809. [ 15.817339] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
  810. [ 22.366766] random: crng init done
  811. [ 38.227760] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
  812. [ 38.227767] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
  813. [ 38.228777] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
  814. [ 38.938757] wlp2s0b1: authenticate with 5c:e2:8c:94:57:c1
  815. [ 38.941222] wlp2s0b1: send auth to 5c:e2:8c:94:57:c1 (try 1/3)
  816. [ 38.942701] wlp2s0b1: authenticated
  817. [ 38.943410] wlp2s0b1: associate with 5c:e2:8c:94:57:c1 (try 1/3)
  818. [ 38.947104] wlp2s0b1: RX AssocResp from 5c:e2:8c:94:57:c1 (capab=0x411 status=0 aid=2)
  819. [ 38.947551] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated
  820. [ 38.947553] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
  821. [ 38.947561] wlp2s0b1: associated
  822. [ 38.951508] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211: AC_VO txop exceeded phylen 159/256 dur 1778/1504
  823. [ 38.957501] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211: AC_VO txop exceeded phylen 137/256 dur 1602/1504
  824. [ 38.965195] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0b1: link becomes ready
  825. [ 39.071995] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
  826. [ 118.968658] brcmsmac bcma0:1: START: tid 1 is not agg'able
  827. [ 118.983661] brcmsmac bcma0:1: START: tid 1 is not agg'able
  828. [ 118.994667] brcmsmac bcma0:1: START: tid 1 is not agg'able
  829. [ 119.005668] brcmsmac bcma0:1: START: tid 1 is not agg'able
  830. [ 119.027658] brcmsmac bcma0:1: START: tid 1 is not agg'able
  831. [ 119.039656] brcmsmac bcma0:1: START: tid 1 is not agg'able
  832. [ 119.092671] brcmsmac bcma0:1: START: tid 1 is not agg'able
  833. [ 119.113663] brcmsmac bcma0:1: START: tid 1 is not agg'able
  834. [ 180.824309] brcmsmac bcma0:1: START: tid 1 is not agg'able
  835. [ 180.832312] brcmsmac bcma0:1: START: tid 1 is not agg'able
  836. [ 289.931205] brcmsmac bcma0:1: START: tid 1 is not agg'able
  837. [ 290.053159] brcmsmac bcma0:1: START: tid 1 is not agg'able
  838. [ 292.931715] brcmsmac bcma0:1: START: tid 1 is not agg'able
  839. [ 292.939701] brcmsmac bcma0:1: START: tid 1 is not agg'able
  840. [ 293.931546] brcmsmac bcma0:1: START: tid 1 is not agg'able
  841. [ 293.940594] brcmsmac bcma0:1: START: tid 1 is not agg'able
  842. [ 743.660471] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
  843. [ 2207.597496] brcmsmac bcma0:1: START: tid 1 is not agg'able
  844. [ 2207.605529] brcmsmac bcma0:1: START: tid 1 is not agg'able
  845. [ 2211.593661] brcmsmac bcma0:1: START: tid 1 is not agg'able
  846. [ 2211.601695] brcmsmac bcma0:1: START: tid 1 is not agg'able
  847. [ 2360.897270] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 0 addresses (implement)
  848. [ 2360.897534] wlp2s0b1: deauthenticating from 5c:e2:8c:94:57:c1 by local choice (Reason: 3=DEAUTH_LEAVING)
  849. [ 2360.898658] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: disassociated
  850. [ 2360.898664] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
  851. [ 2360.940272] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
  852. [ 2360.940280] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
  853. [ 2360.941323] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
  854. [ 2364.223089] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
  855. [ 2364.223096] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
  856. [ 2364.224109] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
  857. [ 2378.306870] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
  858. [ 2378.349359] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
  859. [ 2378.349366] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
  860. [ 2378.350401] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
  861. [ 2385.421008] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
  862. [ 2385.421016] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
  863. [ 2385.422039] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
  864. [ 2470.991102] wlp2s0b1: authenticate with 5c:e2:8c:94:57:c1
  865. [ 2470.991264] wlp2s0b1: send auth to 5c:e2:8c:94:57:c1 (try 1/3)
  866. [ 2470.992725] wlp2s0b1: authenticated
  867. [ 2470.993518] wlp2s0b1: associate with 5c:e2:8c:94:57:c1 (try 1/3)
  868. [ 2470.997161] wlp2s0b1: RX AssocResp from 5c:e2:8c:94:57:c1 (capab=0x411 status=0 aid=2)
  869. [ 2470.997656] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated
  870. [ 2470.997659] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
  871. [ 2470.997666] wlp2s0b1: associated
  872. [ 2471.001075] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211: AC_VO txop exceeded phylen 159/256 dur 1778/1504
  873. [ 2471.009317] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211: AC_VO txop exceeded phylen 137/256 dur 1602/1504
  874. [ 2471.009541] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0b1: link becomes ready
  875. [ 2471.108057] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
  876. [ 2493.508570] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211: AC_VO txop exceeded phylen 153/256 dur 1730/1504
  877. [ 2531.209960] brcmsmac bcma0:1: START: tid 1 is not agg'able
  878. [ 2531.223971] brcmsmac bcma0:1: START: tid 1 is not agg'able
  879. [ 2536.212196] brcmsmac bcma0:1: START: tid 1 is not agg'able
  880. [ 2592.680513] brcmsmac bcma0:1: START: tid 1 is not agg'able
  881. [ 2592.688513] brcmsmac bcma0:1: START: tid 1 is not agg'able
  882. [ 2597.680653] brcmsmac bcma0:1: START: tid 1 is not agg'able
  883. [ 2597.688657] brcmsmac bcma0:1: START: tid 1 is not agg'able
  884. [ 2601.684825] brcmsmac bcma0:1: START: tid 1 is not agg'able
  885. [ 2601.696887] brcmsmac bcma0:1: START: tid 1 is not agg'able
  886. [ 2669.418645] brcmsmac bcma0:1: START: tid 1 is not agg'able
  887. [ 2670.420680] brcmsmac bcma0:1: START: tid 1 is not agg'able
  888. [ 2670.428695] brcmsmac bcma0:1: START: tid 1 is not agg'able
  889. [ 2673.419863] brcmsmac bcma0:1: START: tid 1 is not agg'able
  890. [ 2673.427870] brcmsmac bcma0:1: START: tid 1 is not agg'able
  891. [ 2680.428097] brcmsmac bcma0:1: START: tid 1 is not agg'able
  892. [ 2680.437098] brcmsmac bcma0:1: START: tid 1 is not agg'able
  893. [ 2682.429191] brcmsmac bcma0:1: START: tid 1 is not agg'able
  894. [ 2682.437191] brcmsmac bcma0:1: START: tid 1 is not agg'able
  895. [ 2685.427307] brcmsmac bcma0:1: START: tid 1 is not agg'able
  896. [ 2685.439314] brcmsmac bcma0:1: START: tid 1 is not agg'able
  897. [ 2688.431443] brcmsmac bcma0:1: START: tid 1 is not agg'able
  898. [ 2688.439442] brcmsmac bcma0:1: START: tid 1 is not agg'able
  899. [ 2733.623365] brcmsmac bcma0:1: START: tid 1 is not agg'able
  900. [ 2733.631367] brcmsmac bcma0:1: START: tid 1 is not agg'able
  901. [ 2762.628479] brcmsmac bcma0:1: START: tid 1 is not agg'able
  902. [ 2762.636490] brcmsmac bcma0:1: START: tid 1 is not agg'able
  903. [ 2763.631583] brcmsmac bcma0:1: START: tid 1 is not agg'able
  904. [ 2763.643563] brcmsmac bcma0:1: START: tid 1 is not agg'able
  905. [ 3256.899829] brcmsmac bcma0:1: START: tid 1 is not agg'able
  906.