spacepaste

  1.  
  2. #
  3. # refind.conf
  4. # Configuration file for the rEFInd boot menu
  5. #
  6. # Timeout in seconds for the main menu screen. Setting the timeout to 0
  7. # disables automatic booting (i.e., no timeout). Setting it to -1 causes
  8. # an immediate boot to the default OS *UNLESS* a keypress is in the buffer
  9. # when rEFInd launches, in which case that keypress is interpreted as a
  10. # shortcut key. If no matching shortcut is found, rEFInd displays its
  11. # menu with no timeout.
  12. #
  13. timeout 20
  14. # Screen saver timeout; the screen blanks after the specified number of
  15. # seconds with no keyboard input. The screen returns after most keypresses
  16. # (unfortunately, not including modifier keys such as Shift, Control, Alt,
  17. # or Option). Setting a value of "-1" causes rEFInd to start up with its
  18. # screen saver active. The default is 0, which disables the screen saver.
  19. #screensaver 300
  20. # Hide user interface elements for personal preference or to increase
  21. # security:
  22. # banner - the rEFInd title banner (built-in or loaded via "banner")
  23. # label - boot option text label in the menu
  24. # singleuser - remove the submenu options to boot Mac OS X in single-user
  25. # or verbose modes; affects ONLY MacOS X
  26. # safemode - remove the submenu option to boot Mac OS X in "safe mode"
  27. # hwtest - the submenu option to run Apple's hardware test
  28. # arrows - scroll arrows on the OS selection tag line
  29. # hints - brief command summary in the menu
  30. # editor - the options editor (+, F2, or Insert on boot options menu)
  31. # badges - device-type badges for boot options
  32. # all - all of the above
  33. # Default is none of these (all elements active)
  34. #
  35. #hideui singleuser
  36. #hideui all
  37. # Set the name of a subdirectory in which icons are stored. Icons must
  38. # have the same names they have in the standard directory. The directory
  39. # name is specified relative to the main rEFInd binary's directory. If
  40. # an icon can't be found in the specified directory, an attempt is made
  41. # to load it from the default directory; thus, you can replace just some
  42. # icons in your own directory and rely on the default for others.
  43. # Default is "icons".
  44. #
  45. #icons_dir myicons
  46. #icons_dir icons/snowy
  47. # Use a custom title banner instead of the rEFInd icon and name. The file
  48. # path is relative to the directory where refind.efi is located. The color
  49. # in the top left corner of the image is used as the background color
  50. # for the menu screens. Currently uncompressed BMP images with color
  51. # depths of 24, 8, 4 or 1 bits are supported, as well as PNG images.
  52. #
  53. #banner hostname.bmp
  54. #banner mybanner.png
  55. #banner icons/snowy/banner-snowy.png
  56. # Specify how to handle banners that aren't exactly the same as the screen
  57. # size:
  58. # noscale - Crop if too big, show with border if too small
  59. # fillscreen - Fill the screen
  60. # Default is noscale
  61. #
  62. #banner_scale fillscreen
  63. # Icon sizes. All icons are square, so just one value is specified. The
  64. # big icons are used for OS selectors in the first row and the small
  65. # icons are used for tools on the second row. Drive-type badges are 1/4
  66. # the size of the big icons. Legal values are 32 and above. If the icon
  67. # files do not hold icons of the proper size, the icons are scaled to
  68. # the specified size. The default values are 48 and 128 for small and
  69. # big icons, respectively.
  70. #
  71. #small_icon_size 96
  72. #big_icon_size 256
  73. # Custom images for the selection background. There is a big one (144 x 144)
  74. # for the OS icons, and a small one (64 x 64) for the function icons in the
  75. # second row. If only a small image is given, that one is also used for
  76. # the big icons by stretching it in the middle. If only a big one is given,
  77. # the built-in default will be used for the small icons.
  78. #
  79. # Like the banner option above, these options take a filename of an
  80. # uncompressed BMP image file with a color depth of 24, 8, 4, or 1 bits,
  81. # or a PNG image. The PNG format is required if you need transparency
  82. # support (to let you "see through" to a full-screen banner).
  83. #
  84. #selection_big selection-big.bmp
  85. #selection_small selection-small.bmp
  86. # Set the font to be used for all textual displays in graphics mode.
  87. # The font must be a PNG file with alpha channel transparency. It must
  88. # contain ASCII characters 32-126 (space through tilde), inclusive, plus
  89. # a glyph to be displayed in place of characters outside of this range,
  90. # for a total of 96 glyphs. Only monospaced fonts are supported. Fonts
  91. # may be of any size, although large fonts can produce display
  92. # irregularities.
  93. # The default is rEFInd's built-in font, Luxi Mono Regular 12 point.
  94. #
  95. #font myfont.png
  96. # Use text mode only. When enabled, this option forces rEFInd into text mode.
  97. # Passing this option a "0" value causes graphics mode to be used. Pasing
  98. # it no value or any non-0 value causes text mode to be used.
  99. # Default is to use graphics mode.
  100. #
  101. #textonly
  102. # Set the EFI text mode to be used for textual displays. This option
  103. # takes a single digit that refers to a mode number. Mode 0 is normally
  104. # 80x25, 1 is sometimes 80x50, and higher numbers are system-specific
  105. # modes. Mode 1024 is a special code that tells rEFInd to not set the
  106. # text mode; it uses whatever was in use when the program was launched.
  107. # If you specify an invalid mode, rEFInd pauses during boot to inform
  108. # you of valid modes.
  109. # CAUTION: On VirtualBox, and perhaps on some real computers, specifying
  110. # a text mode and uncommenting the "textonly" option while NOT specifying
  111. # a resolution can result in an unusable display in the booted OS.
  112. # Default is 1024 (no change)
  113. #
  114. #textmode 2
  115. # Set the screen's video resolution. Pass this option either:
  116. # * two values, corresponding to the X and Y resolutions
  117. # * one value, corresponding to a GOP (UEFI) video mode
  118. # Note that not all resolutions are supported. On UEFI systems, passing
  119. # an incorrect value results in a message being shown on the screen to
  120. # that effect, along with a list of supported modes. On EFI 1.x systems
  121. # (e.g., Macintoshes), setting an incorrect mode silently fails. On both
  122. # types of systems, setting an incorrect resolution results in the default
  123. # resolution being used. A resolution of 1024x768 usually works, but higher
  124. # values often don't.
  125. # Default is "0 0" (use the system default resolution, usually 800x600).
  126. #
  127. #resolution 1024 768
  128. #resolution 1440 900
  129. #resolution 3
  130. # Enable touch screen support. If active, this feature enables use of
  131. # touch screen controls (as on tablets). Note, however, that not all
  132. # tablets' EFIs provide the necessary underlying support, so this
  133. # feature may not work for you. If it does work, you should be able
  134. # to launch an OS or tool by touching it. In a submenu, touching
  135. # anywhere launches the currently-selection item; there is, at present,
  136. # no way to select a specific submenu item.
  137. #
  138. #enable_touch
  139. # Launch specified OSes in graphics mode. By default, rEFInd switches
  140. # to text mode and displays basic pre-launch information when launching
  141. # all OSes except OS X. Using graphics mode can produce a more seamless
  142. # transition, but displays no information, which can make matters
  143. # difficult if you must debug a problem. Also, on at least one known
  144. # computer, using graphics mode prevents a crash when using the Linux
  145. # kernel's EFI stub loader. You can specify an empty list to boot all
  146. # OSes in text mode.
  147. # Valid options:
  148. # osx - Mac OS X
  149. # linux - A Linux kernel with EFI stub loader
  150. # elilo - The ELILO boot loader
  151. # grub - The GRUB (Legacy or 2) boot loader
  152. # windows - Microsoft Windows
  153. # Default value: osx
  154. #
  155. #use_graphics_for osx,linux
  156. # Which non-bootloader tools to show on the tools line, and in what
  157. # order to display them:
  158. # shell - the EFI shell (requires external program; see rEFInd
  159. # documentation for details)
  160. # memtest - the memtest86 program, in EFI/tools, EFI/memtest86,
  161. # EFI/memtest, EFI/tools/memtest86, or EFI/tools/memtest
  162. # gptsync - the (dangerous) gptsync.efi utility (requires external
  163. # program; see rEFInd documentation for details)
  164. # gdisk - the gdisk partitioning program
  165. # apple_recovery - boots the Apple Recovery HD partition, if present
  166. # windows_recovery - boots an OEM Windows recovery tool, if present
  167. # (see also the windows_recovery_files option)
  168. # mok_tool - makes available the Machine Owner Key (MOK) maintenance
  169. # tool, MokManager.efi, used on Secure Boot systems
  170. # csr_rotate - adjusts Apple System Integrity Protection (SIP)
  171. # policy. Requires "csr_values" to be set.
  172. # about - an "about this program" option
  173. # exit - a tag to exit from rEFInd
  174. # shutdown - shuts down the computer (a bug causes this to reboot
  175. # many UEFI systems)
  176. # reboot - a tag to reboot the computer
  177. # firmware - a tag to reboot the computer into the firmware's
  178. # user interface (ignored on older computers)
  179. # fwupdate - a tag to update the firmware; launches the fwupx64.efi
  180. # (or similar) program
  181. # netboot - launch the ipxe.efi tool for network (PXE) booting
  182. # Default is shell,memtest,gdisk,apple_recovery,windows_recovery,mok_tool,about,shutdown,reboot,firmware,fwupdate
  183. #
  184. #showtools shell, gdisk, memtest, mok_tool, apple_recovery, windows_recovery, about, reboot, exit, firmware, fwupdate
  185. # Boot loaders that can launch a Windows restore or emergency system.
  186. # These tend to be OEM-specific.
  187. # Default is LRS_ESP:/EFI/Microsoft/Boot/LrsBootmgr.efi
  188. #
  189. #windows_recovery_files LRS_ESP:/EFI/Microsoft/Boot/LrsBootmgr.efi
  190. # Directories in which to search for EFI drivers. These drivers can
  191. # provide filesystem support, give access to hard disks on plug-in
  192. # controllers, etc. In most cases none are needed, but if you add
  193. # EFI drivers and you want rEFInd to automatically load them, you
  194. # should specify one or more paths here. rEFInd always scans the
  195. # "drivers" and "drivers_{arch}" subdirectories of its own installation
  196. # directory (where "{arch}" is your architecture code); this option
  197. # specifies ADDITIONAL directories to scan.
  198. # Default is to scan no additional directories for EFI drivers
  199. #
  200. #scan_driver_dirs EFI/tools/drivers,drivers
  201. # Which types of boot loaders to search, and in what order to display them:
  202. # internal - internal EFI disk-based boot loaders
  203. # external - external EFI disk-based boot loaders
  204. # optical - EFI optical discs (CD, DVD, etc.)
  205. # netboot - EFI network (PXE) boot options
  206. # hdbios - BIOS disk-based boot loaders
  207. # biosexternal - BIOS external boot loaders (USB, eSATA, etc.)
  208. # cd - BIOS optical-disc boot loaders
  209. # manual - use stanzas later in this configuration file
  210. # Note that the legacy BIOS options require firmware support, which is
  211. # not present on all computers.
  212. # The netboot option is experimental and relies on the ipxe.efi and
  213. # ipxe_discover.efi program files.
  214. # On UEFI PCs, default is internal,external,optical,manual
  215. # On Macs, default is internal,hdbios,external,biosexternal,optical,cd,manual
  216. #
  217. #scanfor internal,external,optical,manual
  218. # By default, rEFInd relies on the UEFI firmware to detect BIOS-mode boot
  219. # devices. This sometimes doesn't detect all the available devices, though.
  220. # For these cases, uefi_deep_legacy_scan results in a forced scan and
  221. # modification of NVRAM variables on each boot. Adding "0", "off", or
  222. # "false" resets to the default value. This token has no effect on Macs or
  223. # when no BIOS-mode options are set via scanfor.
  224. # Default is unset (or "uefi_deep_legacy_scan false")
  225. #
  226. #uefi_deep_legacy_scan
  227. # Delay for the specified number of seconds before scanning disks.
  228. # This can help some users who find that some of their disks
  229. # (usually external or optical discs) aren't detected initially,
  230. # but are detected after pressing Esc.
  231. # The default is 0.
  232. #
  233. #scan_delay 5
  234. # When scanning volumes for EFI boot loaders, rEFInd always looks for
  235. # Mac OS X's and Microsoft Windows' boot loaders in their normal locations,
  236. # and scans the root directory and every subdirectory of the /EFI directory
  237. # for additional boot loaders, but it doesn't recurse into these directories.
  238. # The also_scan_dirs token adds more directories to the scan list.
  239. # Directories are specified relative to the volume's root directory. This
  240. # option applies to ALL the volumes that rEFInd scans UNLESS you include
  241. # a volume name and colon before the directory name, as in "myvol:/somedir"
  242. # to scan the somedir directory only on the filesystem named myvol. If a
  243. # specified directory doesn't exist, it's ignored (no error condition
  244. # results). The default is to scan the "boot" directory in addition to
  245. # various hard-coded directories.
  246. #
  247. #also_scan_dirs boot,ESP2:EFI/linux/kernels
  248. # Partitions (or whole disks, for legacy-mode boots) to omit from scans.
  249. # For EFI-mode scans, you must specify a volume by its label, which you
  250. # can obtain in an EFI shell by typing "vol", from Linux by typing
  251. # "blkid /dev/{devicename}", or by examining the disk's label in various
  252. # OSes' file browsers.
  253. # For legacy-mode scans, you can specify any subset of the boot loader
  254. # description shown when you highlight the option in rEFInd.
  255. # The default is "LRS_ESP".
  256. #
  257. #dont_scan_volumes "Recovery HD"
  258. # Directories that should NOT be scanned for boot loaders. By default,
  259. # rEFInd doesn't scan its own directory, the EFI/tools directory, the
  260. # EFI/memtest directory, the EFI/memtest86 directory, or the
  261. # com.apple.recovery.boot directory. Using the dont_scan_dirs option
  262. # enables you to "blacklist" other directories; but be sure to use "+"
  263. # as the first element if you want to continue blacklisting existing
  264. # directories. You might use this token to keep EFI/boot/bootx64.efi out
  265. # of the menu if that's a duplicate of another boot loader or to exclude
  266. # a directory that holds drivers or non-bootloader utilities provided by
  267. # a hardware manufacturer. If a directory is listed both here and in
  268. # also_scan_dirs, dont_scan_dirs takes precedence. Note that this
  269. # blacklist applies to ALL the filesystems that rEFInd scans, not just
  270. # the ESP, unless you precede the directory name by a filesystem name,
  271. # as in "myvol:EFI/somedir" to exclude EFI/somedir from the scan on the
  272. # myvol volume but not on other volumes.
  273. #
  274. #dont_scan_dirs ESP:/EFI/boot,EFI/Dell,EFI/memtest86
  275. # Files that should NOT be included as EFI boot loaders (on the
  276. # first line of the display). If you're using a boot loader that
  277. # relies on support programs or drivers that are installed alongside
  278. # the main binary or if you want to "blacklist" certain loaders by
  279. # name rather than location, use this option. Note that this will
  280. # NOT prevent certain binaries from showing up in the second-row
  281. # set of tools. Most notably, various Secure Boot and recovery
  282. # tools are present in this list, but may appear as second-row
  283. # items.
  284. # The file may be specified as a bare name (e.g., "notme.efi"), as
  285. # a complete filename (e.g., "/EFI/somedir/notme.efi"), or as a
  286. # complete filename with volume (e.g., "SOMEDISK:/EFI/somedir/notme.efi").
  287. # The default is shim.efi,shim-fedora.efi,shimx64.efi,PreLoader.efi,
  288. # TextMode.efi,ebounce.efi,GraphicsConsole.efi,MokManager.efi,HashTool.efi,
  289. # HashTool-signed.efi,bootmgr.efi
  290. #
  291. #dont_scan_files shim.efi,MokManager.efi
  292. # Scan for Linux kernels that lack a ".efi" filename extension. This is
  293. # useful for better integration with Linux distributions that provide
  294. # kernels with EFI stub loaders but that don't give those kernels filenames
  295. # that end in ".efi", particularly if the kernels are stored on a
  296. # filesystem that the EFI can read. When set to "1", "true", or "on", this
  297. # option causes all files in scanned directories with names that begin with
  298. # "vmlinuz" or "bzImage" to be included as loaders, even if they lack ".efi"
  299. # extensions. Passing this option a "0", "false", or "off" value causes
  300. # kernels without ".efi" extensions to NOT be scanned.
  301. # Default is "true" -- to scan for kernels without ".efi" extensions.
  302. #
  303. #scan_all_linux_kernels false
  304. # Combine all Linux kernels in a given directory into a single entry.
  305. # When so set, the kernel with the most recent time stamp will be launched
  306. # by default, and its filename will appear in the entry's description.
  307. # To launch other kernels, the user must press F2 or Insert; alternate
  308. # kernels then appear as options on the sub-menu.
  309. # Default is "true" -- kernels are "folded" into a single menu entry.
  310. #
  311. fold_linux_kernels true
  312. # Set the maximum number of tags that can be displayed on the screen at
  313. # any time. If more loaders are discovered than this value, rEFInd shows
  314. # a subset in a scrolling list. If this value is set too high for the
  315. # screen to handle, it's reduced to the value that the screen can manage.
  316. # If this value is set to 0 (the default), it's adjusted to the number
  317. # that the screen can handle.
  318. #
  319. #max_tags 0
  320. # Set the default menu selection. The available arguments match the
  321. # keyboard accelerators available within rEFInd. You may select the
  322. # default loader using:
  323. # - A digit between 1 and 9, in which case the Nth loader in the menu
  324. # will be the default.
  325. # - A "+" symbol at the start of the string, which refers to the most
  326. # recently booted loader.
  327. # - Any substring that corresponds to a portion of the loader's title
  328. # (usually the OS's name, boot loader's path, or a volume or
  329. # filesystem title).
  330. # You may also specify multiple selectors by separating them with commas
  331. # and enclosing the list in quotes. (The "+" option is only meaningful in
  332. # this context.)
  333. # If you follow the selector(s) with two times, in 24-hour format, the
  334. # default will apply only between those times. The times are in the
  335. # motherboard's time standard, whether that's UTC or local time, so if
  336. # you use UTC, you'll need to adjust this from local time manually.
  337. # Times may span midnight as in "23:30 00:30", which applies to 11:30 PM
  338. # to 12:30 AM. You may specify multiple default_selection lines, in which
  339. # case the last one to match takes precedence. Thus, you can set a main
  340. # option without a time followed by one or more that include times to
  341. # set different defaults for different times of day.
  342. # The default behavior is to boot the previously-booted OS.
  343. #
  344. #default_selection 1
  345. #default_selection Microsoft
  346. #default_selection "+,bzImage,vmlinuz"
  347. #default_selection Maintenance 23:30 2:00
  348. #default_selection "Maintenance,OS X" 1:00 2:30
  349. # Enable VMX bit and lock the CPU MSR if unlocked.
  350. # On some Intel Apple computers, the firmware does not lock the MSR 0x3A.
  351. # The symptom on Windows is Hyper-V not working even if the CPU
  352. # meets the minimum requirements (HW assisted virtualization and SLAT)
  353. # DO NOT SET THIS EXCEPT ON INTEL CPUs THAT SUPPORT VMX! See
  354. # http://www.thomas-krenn.com/en/wiki/Activating_the_Intel_VT_Virtualization_Feature!
  355. # for more on this subject.
  356. # The default is false: Don't try to enable and lock the MSR.
  357. #
  358. #enable_and_lock_vmx false
  359. # Tell a Mac's EFI that OS X is about to be launched, even when it's not.
  360. # This option causes some Macs to initialize their hardware differently than
  361. # when a third-party OS is launched normally. In some cases (particularly on
  362. # Macs with multiple video cards), using this option can cause hardware to
  363. # work that would not otherwise work. On the other hand, using this option
  364. # when it is not necessary can cause hardware (such as keyboards and mice) to
  365. # become inaccessible. Therefore, you should not enable this option if your
  366. # non-Apple OSes work correctly; enable it only if you have problems with
  367. # some hardware devices. When needed, a value of "10.9" usually works, but
  368. # you can experiment with other values. This feature has no effect on
  369. # non-Apple computers.
  370. # The default is inactive (no OS X spoofing is done).
  371. #
  372. #spoof_osx_version 10.9
  373. # Set the CSR values for Apple's System Integrity Protection (SIP) feature.
  374. # Values are one-byte (two-character) hexadecimal numbers. These values
  375. # define which specific security features are enabled. Below are the codes
  376. # for what the values mean. Add them up (in hexadecimal!) to set new values.
  377. # Apple's "csrutil enable" and "csrutil disable" commands set values of 10
  378. # and 77, respectively.
  379. # CSR_ALLOW_UNTRUSTED_KEXTS 0x01
  380. # CSR_ALLOW_UNRESTRICTED_FS 0x02
  381. # CSR_ALLOW_TASK_FOR_PID 0x04
  382. # CSR_ALLOW_KERNEL_DEBUGGER 0x08
  383. # CSR_ALLOW_APPLE_INTERNAL 0x10
  384. # CSR_ALLOW_UNRESTRICTED_DTRACE 0x20
  385. # CSR_ALLOW_UNRESTRICTED_NVRAM 0x40
  386. #
  387. #csr_values 10,77
  388. # Include a secondary configuration file within this one. This secondary
  389. # file is loaded as if its options appeared at the point of the "include"
  390. # token itself, so if you want to override a setting in the main file,
  391. # the secondary file must be referenced AFTER the setting you want to
  392. # override. Note that the secondary file may NOT load a tertiary file.
  393. #
  394. #include manual.conf
  395. # Sample manual configuration stanzas. Each begins with the "menuentry"
  396. # keyword followed by a name that's to appear in the menu (use quotes
  397. # if you want the name to contain a space) and an open curly brace
  398. # ("{"). Each entry ends with a close curly brace ("}"). Common
  399. # keywords within each stanza include:
  400. #
  401. # volume - identifies the filesystem from which subsequent files
  402. # are loaded. You can specify the volume by filesystem
  403. # label, by partition label, or by partition GUID number
  404. # (but NOT yet by filesystem UUID number).
  405. # loader - identifies the boot loader file
  406. # initrd - Specifies an initial RAM disk file
  407. # icon - specifies a custom boot loader icon
  408. # ostype - OS type code to determine boot options available by
  409. # pressing Insert. Valid values are "MacOS", "Linux",
  410. # "Windows", and "XOM". Case-sensitive.
  411. # graphics - set to "on" to enable graphics-mode boot (useful
  412. # mainly for MacOS) or "off" for text-mode boot.
  413. # Default is auto-detected from loader filename.
  414. # options - sets options to be passed to the boot loader; use
  415. # quotes if more than one option should be passed or
  416. # if any options use characters that might be changed
  417. # by rEFInd parsing procedures (=, /, #, or tab).
  418. # disabled - use alone or set to "yes" to disable this entry.
  419. #
  420. # Note that you can use either DOS/Windows/EFI-style backslashes (\)
  421. # or Unix-style forward slashes (/) as directory separators. Either
  422. # way, all file references are on the ESP from which rEFInd was
  423. # launched.
  424. # Use of quotes around parameters causes them to be interpreted as
  425. # one keyword, and for parsing of special characters (spaces, =, /,
  426. # and #) to be disabled. This is useful mainly with the "options"
  427. # keyword. Use of quotes around parameters that specify filenames is
  428. # permissible, but you must then use backslashes instead of slashes,
  429. # except when you must pass a forward slash to the loader, as when
  430. # passing a root= option to a Linux kernel.
  431. # Below are several sample boot stanzas. All are disabled by default.
  432. # Find one similar to what you need, copy it, remove the "disabled" line,
  433. # and adjust the entries to suit your needs.
  434. # A sample entry for a Linux 3.13 kernel with EFI boot stub support
  435. # on a partition with a GUID of 904404F8-B481-440C-A1E3-11A5A954E601.
  436. # This entry includes Linux-specific boot options and specification
  437. # of an initial RAM disk. Note uses of Linux-style forward slashes.
  438. # Also note that a leading slash is optional in file specifications.
  439. menuentry Linux {
  440. icon EFI/refind/icons/os_linux.png
  441. volume 904404F8-B481-440C-A1E3-11A5A954E601
  442. loader bzImage-3.3.0-rc7
  443. initrd initrd-3.3.0.img
  444. options "ro root=UUID=5f96cafa-e0a7-4057-b18f-fa709db5b837"
  445. disabled
  446. }
  447. # A sample entry for loading Ubuntu using its standard name for
  448. # its GRUB 2 boot loader. Note uses of Linux-style forward slashes
  449. menuentry Ubuntu {
  450. loader /EFI/ubuntu/grubx64.efi
  451. icon /EFI/refind/icons/os_linux.png
  452. disabled
  453. }
  454. # A minimal ELILO entry, which probably offers nothing that
  455. # auto-detection can't accomplish.
  456. menuentry "ELILO" {
  457. loader \EFI\elilo\elilo.efi
  458. disabled
  459. }
  460. # Like the ELILO entry, this one offers nothing that auto-detection
  461. # can't do; but you might use it if you want to disable auto-detection
  462. # but still boot Windows....
  463. menuentry "Windows 7" {
  464. loader \EFI\Microsoft\Boot\bootmgfw.efi
  465. disabled
  466. }
  467. # EFI shells are programs just like boot loaders, and can be
  468. # launched in the same way. You can pass a shell the name of a
  469. # script that it's to run on the "options" line. The script
  470. # could initialize hardware and then launch an OS, or it could
  471. # do something entirely different.
  472. menuentry "Windows via shell script" {
  473. icon \EFI\refind\icons\os_win.png
  474. loader \EFI\tools\shell.efi
  475. options "fs0:\EFI\tools\launch_windows.nsh"
  476. disabled
  477. }
  478. # Mac OS is normally detected and run automatically; however,
  479. # if you want to do something unusual, a manual boot stanza may
  480. # be the way to do it. This one does nothing very unusual, but
  481. # it may serve as a starting point. Note that you'll almost
  482. # certainly need to change the "volume" line for this example
  483. # to work.
  484. menuentry "My Mac OS X" {
  485. icon \EFI\refind\icons\os_mac.png
  486. volume "OS X boot"
  487. loader \System\Library\CoreServices\boot.efi
  488. disabled
  489. }
  490. menuentry "Gentoo Latest" {
  491. icon EFI/refind/icons/os_linux.png
  492. loader /boot/vmlinuz-4.8.13-gentoo
  493. options "root=/dev/sda3 vga=0x375"
  494. }
  495.