spacepaste

Paste details

reply | raw

  1.  
  2. [ 0.000000] Linux version 4.14.8-gentoo-r1 (root@sysresccd) (gcc version 6.4.0 (Gentoo 6.4.0 p1.1)) #6 SMP Tue Dec 26 19:30:28 CET 2017
  3. [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.14.8-gentoo-r1 root=PARTUUID=9f75afba-7b9f-4fcd-8efd-bf17c9a29b03 ro
  4. [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
  5. [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
  6. [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
  7. [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
  8. [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
  9. [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
  10. [ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
  11. [ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
  12. [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
  13. [ 0.000000] e820: BIOS-provided physical RAM map:
  14. [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
  15. [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
  16. [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
  17. [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
  18. [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000832d5fff] usable
  19. [ 0.000000] BIOS-e820: [mem 0x00000000832d6000-0x00000000832d6fff] ACPI NVS
  20. [ 0.000000] BIOS-e820: [mem 0x00000000832d7000-0x00000000832d7fff] reserved
  21. [ 0.000000] BIOS-e820: [mem 0x00000000832d8000-0x00000000892bcfff] usable
  22. [ 0.000000] BIOS-e820: [mem 0x00000000892bd000-0x000000008a160fff] reserved
  23. [ 0.000000] BIOS-e820: [mem 0x000000008a161000-0x000000008a6a3fff] usable
  24. [ 0.000000] BIOS-e820: [mem 0x000000008a6a4000-0x000000008a72efff] ACPI NVS
  25. [ 0.000000] BIOS-e820: [mem 0x000000008a72f000-0x000000008af36fff] reserved
  26. [ 0.000000] BIOS-e820: [mem 0x000000008af37000-0x000000008affdfff] type 20
  27. [ 0.000000] BIOS-e820: [mem 0x000000008affe000-0x000000008affefff] usable
  28. [ 0.000000] BIOS-e820: [mem 0x000000008afff000-0x000000008fffffff] reserved
  29. [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
  30. [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
  31. [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
  32. [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
  33. [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
  34. [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
  35. [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000046effffff] usable
  36. [ 0.000000] NX (Execute Disable) protection: active
  37. [ 0.000000] efi: EFI v2.60 by American Megatrends
  38. [ 0.000000] efi: ACPI 2.0=0x8a6a4000 ACPI=0x8a6a4000 SMBIOS=0x8ae96000 SMBIOS 3.0=0x8ae95000 ESRT=0x85bb9398 MEMATTR=0x86471018
  39. [ 0.000000] random: fast init done
  40. [ 0.000000] SMBIOS 3.0.0 present.
  41. [ 0.000000] DMI: TUXEDO N7x0WU /N7x0WU , BIOS 5.12 08/31/2017
  42. [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
  43. [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
  44. [ 0.000000] e820: last_pfn = 0x46f000 max_arch_pfn = 0x400000000
  45. [ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
  46. [ 0.000000] e820: last_pfn = 0x8afff max_arch_pfn = 0x400000000
  47. [ 0.000000] esrt: Reserving ESRT space from 0x0000000085bb9398 to 0x0000000085bb93d0.
  48. [ 0.000000] Scanning 1 areas for low memory corruption
  49. [ 0.000000] Base memory trampoline at [ffff9d7e00097000] 97000 size 24576
  50. [ 0.000000] Using GB pages for direct mapping
  51. [ 0.000000] BRK [0x2076f0000, 0x2076f0fff] PGTABLE
  52. [ 0.000000] BRK [0x2076f1000, 0x2076f1fff] PGTABLE
  53. [ 0.000000] BRK [0x2076f2000, 0x2076f2fff] PGTABLE
  54. [ 0.000000] BRK [0x2076f3000, 0x2076f3fff] PGTABLE
  55. [ 0.000000] BRK [0x2076f4000, 0x2076f4fff] PGTABLE
  56. [ 0.000000] BRK [0x2076f5000, 0x2076f5fff] PGTABLE
  57. [ 0.000000] BRK [0x2076f6000, 0x2076f6fff] PGTABLE
  58. [ 0.000000] BRK [0x2076f7000, 0x2076f7fff] PGTABLE
  59. [ 0.000000] BRK [0x2076f8000, 0x2076f8fff] PGTABLE
  60. [ 0.000000] BRK [0x2076f9000, 0x2076f9fff] PGTABLE
  61. [ 0.000000] BRK [0x2076fa000, 0x2076fafff] PGTABLE
  62. [ 0.000000] BRK [0x2076fb000, 0x2076fbfff] PGTABLE
  63. [ 0.000000] Secure boot could not be determined
  64. [ 0.000000] ACPI: Early table checksum verification disabled
  65. [ 0.000000] ACPI: RSDP 0x000000008A6A4000 000024 (v02 ALASKA)
  66. [ 0.000000] ACPI: XSDT 0x000000008A6A40A0 0000BC (v01 ALASKA A M I 01072009 AMI 00010013)
  67. [ 0.000000] ACPI: FACP 0x000000008A6C20B8 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
  68. [ 0.000000] ACPI: DSDT 0x000000008A6A41F0 01DEC3 (v02 ALASKA A M I 01072009 INTL 20160422)
  69. [ 0.000000] ACPI: FACS 0x000000008A6FEF00 000040
  70. [ 0.000000] ACPI: APIC 0x000000008A6C21D0 0000BC (v03 ALASKA A M I 01072009 AMI 00010013)
  71. [ 0.000000] ACPI: FPDT 0x000000008A6C2290 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
  72. [ 0.000000] ACPI: FIDT 0x000000008A6C22D8 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
  73. [ 0.000000] ACPI: MCFG 0x000000008A6C2378 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
  74. [ 0.000000] ACPI: SSDT 0x000000008A6C23B8 000359 (v01 SataRe SataTabl 00001000 INTL 20160422)
  75. [ 0.000000] ACPI: SSDT 0x000000008A6C2718 00149E (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
  76. [ 0.000000] ACPI: HPET 0x000000008A6C3BB8 000038 (v01 INTEL KBL-ULT 00000001 MSFT 0000005F)
  77. [ 0.000000] ACPI: UEFI 0x000000008A6C3BF0 000042 (v01 ALASKA A M I 00000002 01000013)
  78. [ 0.000000] ACPI: SSDT 0x000000008A6C3C38 0017AE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
  79. [ 0.000000] ACPI: SSDT 0x000000008A6C53E8 0009CF (v02 CtdpB CtdpB 00001000 INTL 20160422)
  80. [ 0.000000] ACPI: SSDT 0x000000008A6C5DB8 00165F (v02 INTEL PtidDevc 00001000 INTL 20160422)
  81. [ 0.000000] ACPI: DBGP 0x000000008A6C7418 000034 (v01 INTEL 00000002 MSFT 0000005F)
  82. [ 0.000000] ACPI: DBG2 0x000000008A6C7450 000054 (v00 INTEL 00000002 MSFT 0000005F)
  83. [ 0.000000] ACPI: DMAR 0x000000008A6C74A8 0000A8 (v01 INTEL KBL 00000001 INTL 00000001)
  84. [ 0.000000] ACPI: TPM2 0x000000008A6C7550 000034 (v03 ALASKA A M I 00000001 AMI 00000000)
  85. [ 0.000000] ACPI: BGRT 0x000000008A6C7588 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
  86. [ 0.000000] ACPI: ASF! 0x000000008A6C75C0 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
  87. [ 0.000000] ACPI: WSMT 0x000000008A6C7660 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
  88. [ 0.000000] ACPI: Local APIC address 0xfee00000
  89. [ 0.000000] No NUMA configuration found
  90. [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000046effffff]
  91. [ 0.000000] NODE_DATA(0) allocated [mem 0x46effc000-0x46effffff]
  92. [ 0.000000] Zone ranges:
  93. [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
  94. [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
  95. [ 0.000000] Normal [mem 0x0000000100000000-0x000000046effffff]
  96. [ 0.000000] Movable zone start for each node
  97. [ 0.000000] Early memory node ranges
  98. [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
  99. [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff]
  100. [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000832d5fff]
  101. [ 0.000000] node 0: [mem 0x00000000832d8000-0x00000000892bcfff]
  102. [ 0.000000] node 0: [mem 0x000000008a161000-0x000000008a6a3fff]
  103. [ 0.000000] node 0: [mem 0x000000008affe000-0x000000008affefff]
  104. [ 0.000000] node 0: [mem 0x0000000100000000-0x000000046effffff]
  105. [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000046effffff]
  106. [ 0.000000] On node 0 totalpages: 4163483
  107. [ 0.000000] DMA zone: 64 pages used for memmap
  108. [ 0.000000] DMA zone: 23 pages reserved
  109. [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
  110. [ 0.000000] DMA32 zone: 8736 pages used for memmap
  111. [ 0.000000] DMA32 zone: 559103 pages, LIFO batch:31
  112. [ 0.000000] Normal zone: 56256 pages used for memmap
  113. [ 0.000000] Normal zone: 3600384 pages, LIFO batch:31
  114. [ 0.000000] Reserving Intel graphics memory at 0x000000008c000000-0x000000008fffffff
  115. [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
  116. [ 0.000000] ACPI: Local APIC address 0xfee00000
  117. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
  118. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
  119. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
  120. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
  121. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
  122. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
  123. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
  124. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
  125. [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
  126. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  127. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  128. [ 0.000000] ACPI: IRQ0 used by override.
  129. [ 0.000000] ACPI: IRQ9 used by override.
  130. [ 0.000000] Using ACPI (MADT) for SMP configuration information
  131. [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
  132. [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
  133. [ 0.000000] e820: [mem 0x90000000-0xdfffffff] available for PCI devices
  134. [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
  135. [ 0.000000] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:8 nr_node_ids:1
  136. [ 0.000000] percpu: Embedded 37 pages/cpu @ffff9d826ec00000 s110872 r8192 d32488 u262144
  137. [ 0.000000] pcpu-alloc: s110872 r8192 d32488 u262144 alloc=1*2097152
  138. [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
  139. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4098404
  140. [ 0.000000] Policy zone: Normal
  141. [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.14.8-gentoo-r1 root=PARTUUID=9f75afba-7b9f-4fcd-8efd-bf17c9a29b03 ro
  142. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  143. [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
  144. [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
  145. [ 0.000000] Memory: 16277884K/16653932K available (9110K kernel code, 1113K rwdata, 2856K rodata, 1136K init, 632K bss, 376048K reserved, 0K cma-reserved)
  146. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
  147. [ 0.000000] Hierarchical RCU implementation.
  148. [ 0.000000] RCU event tracing is enabled.
  149. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=8.
  150. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
  151. [ 0.000000] NR_IRQS: 4352, nr_irqs: 2048, preallocated irqs: 16
  152. [ 0.000000] Console: colour dummy device 80x25
  153. [ 0.000000] console [tty0] enabled
  154. [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
  155. [ 0.000000] hpet clockevent registered
  156. [ 0.001000] tsc: Detected 2000.000 MHz processor
  157. [ 0.001000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3984.00 BogoMIPS (lpj=1992000)
  158. [ 0.001000] pid_max: default: 32768 minimum: 301
  159. [ 0.001000] ACPI: Core revision 20170728
  160. [ 0.036592] ACPI: 6 ACPI AML tables successfully acquired and loaded
  161. [ 0.037022] Security Framework initialized
  162. [ 0.037026] SELinux: Initializing.
  163. [ 0.037034] SELinux: Starting in permissive mode
  164. [ 0.039906] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
  165. [ 0.041126] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
  166. [ 0.041170] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
  167. [ 0.041209] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
  168. [ 0.041393] CPU: Physical Processor ID: 0
  169. [ 0.041396] CPU: Processor Core ID: 0
  170. [ 0.041402] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
  171. [ 0.041404] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
  172. [ 0.041412] mce: CPU supports 10 MCE banks
  173. [ 0.041425] CPU0: Thermal monitoring enabled (TM1)
  174. [ 0.041455] process: using mwait in idle threads
  175. [ 0.041459] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
  176. [ 0.041462] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
  177. [ 0.041697] Freeing SMP alternatives memory: 32K
  178. [ 0.043902] smpboot: Max logical packages: 2
  179. [ 0.047962] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  180. [ 0.057000] TSC deadline timer enabled
  181. [ 0.057000] smpboot: CPU0: Intel(R) Core(TM) i7-8550U CPU @ 1.80GHz (family: 0x6, model: 0x8e, stepping: 0xa)
  182. [ 0.057000] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
  183. [ 0.057000] ... version: 4
  184. [ 0.057000] ... bit width: 48
  185. [ 0.057000] ... generic registers: 4
  186. [ 0.057000] ... value mask: 0000ffffffffffff
  187. [ 0.057000] ... max period: 00007fffffffffff
  188. [ 0.057000] ... fixed-purpose events: 3
  189. [ 0.057000] ... event mask: 000000070000000f
  190. [ 0.057000] Hierarchical SRCU implementation.
  191. [ 0.057000] smp: Bringing up secondary CPUs ...
  192. [ 0.057000] x86: Booting SMP configuration:
  193. [ 0.057000] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
  194. [ 0.062465] smp: Brought up 1 node, 8 CPUs
  195. [ 0.062465] smpboot: Total of 8 processors activated (31872.00 BogoMIPS)
  196. [ 0.063004] devtmpfs: initialized
  197. [ 0.063156] PM: Registering ACPI NVS region [mem 0x832d6000-0x832d6fff] (4096 bytes)
  198. [ 0.063156] PM: Registering ACPI NVS region [mem 0x8a6a4000-0x8a72efff] (569344 bytes)
  199. [ 0.063156] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
  200. [ 0.063156] futex hash table entries: 2048 (order: 5, 131072 bytes)
  201. [ 0.063156] pinctrl core: initialized pinctrl subsystem
  202. [ 0.063268] RTC time: 18:59:03, date: 12/27/17
  203. [ 0.063351] NET: Registered protocol family 16
  204. [ 0.063503] cpuidle: using governor menu
  205. [ 0.063503] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
  206. [ 0.063503] ACPI: bus type PCI registered
  207. [ 0.063503] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
  208. [ 0.063503] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
  209. [ 0.063503] PCI: Using configuration type 1 for base access
  210. [ 0.066036] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  211. [ 0.066064] ACPI: Added _OSI(Module Device)
  212. [ 0.066067] ACPI: Added _OSI(Processor Device)
  213. [ 0.066069] ACPI: Added _OSI(3.0 _SCP Extensions)
  214. [ 0.066072] ACPI: Added _OSI(Processor Aggregator Device)
  215. [ 0.067102] ACPI: Executed 24 blocks of module-level executable AML code
  216. [ 0.081248] ACPI: Dynamic OEM Table Load:
  217. [ 0.081258] ACPI: SSDT 0xFFFF9D825C1F0000 0005CD (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
  218. [ 0.081435] ACPI: Executed 1 blocks of module-level executable AML code
  219. [ 0.081520] ACPI: \_PR_.PR00: _OSC native thermal LVT Acked
  220. [ 0.082070] ACPI: Dynamic OEM Table Load:
  221. [ 0.082079] ACPI: SSDT 0xFFFF9D825C0B3C00 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
  222. [ 0.082236] ACPI: Executed 1 blocks of module-level executable AML code
  223. [ 0.083423] ACPI: Dynamic OEM Table Load:
  224. [ 0.083436] ACPI: SSDT 0xFFFF9D825C123000 000D14 (v02 PmRef ApIst 00003000 INTL 20160422)
  225. [ 0.083652] ACPI: Executed 1 blocks of module-level executable AML code
  226. [ 0.084062] ACPI: Dynamic OEM Table Load:
  227. [ 0.084073] ACPI: SSDT 0xFFFF9D825C208400 00030A (v02 PmRef ApCst 00003000 INTL 20160422)
  228. [ 0.084273] ACPI: Executed 1 blocks of module-level executable AML code
  229. [ 0.087506] ACPI: EC: EC started
  230. [ 0.087510] ACPI: EC: interrupt blocked
  231. [ 0.088184] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
  232. [ 0.088188] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
  233. [ 0.088192] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
  234. [ 0.088195] ACPI: Interpreter enabled
  235. [ 0.088240] ACPI: (supports S0 S3 S5)
  236. [ 0.088242] ACPI: Using IOAPIC for interrupt routing
  237. [ 0.088290] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
  238. [ 0.088808] ACPI: Enabled 7 GPEs in block 00 to 7F
  239. [ 0.110151] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
  240. [ 0.110159] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
  241. [ 0.110361] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
  242. [ 0.110546] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
  243. [ 0.110549] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
  244. [ 0.110822] PCI host bridge to bus 0000:00
  245. [ 0.110827] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
  246. [ 0.110830] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
  247. [ 0.110833] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
  248. [ 0.110836] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
  249. [ 0.110839] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
  250. [ 0.110842] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
  251. [ 0.110845] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
  252. [ 0.110848] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
  253. [ 0.110851] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
  254. [ 0.110854] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
  255. [ 0.110857] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
  256. [ 0.110860] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
  257. [ 0.110863] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
  258. [ 0.110866] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
  259. [ 0.110869] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
  260. [ 0.110872] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
  261. [ 0.110875] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
  262. [ 0.110878] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
  263. [ 0.110881] pci_bus 0000:00: root bus resource [bus 00-fe]
  264. [ 0.110892] pci 0000:00:00.0: [8086:5914] type 00 class 0x060000
  265. [ 0.111039] pci 0000:00:02.0: [8086:5917] type 00 class 0x030000
  266. [ 0.111052] pci 0000:00:02.0: reg 0x10: [mem 0xde000000-0xdeffffff 64bit]
  267. [ 0.111060] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
  268. [ 0.111065] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
  269. [ 0.111081] pci 0000:00:02.0: BAR 2: assigned to efifb
  270. [ 0.111284] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
  271. [ 0.111308] pci 0000:00:14.0: reg 0x10: [mem 0xdf310000-0xdf31ffff 64bit]
  272. [ 0.111383] pci 0000:00:14.0: PME# supported from D3hot D3cold
  273. [ 0.111607] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
  274. [ 0.111631] pci 0000:00:14.2: reg 0x10: [mem 0xdf32e000-0xdf32efff 64bit]
  275. [ 0.111823] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
  276. [ 0.111852] pci 0000:00:16.0: reg 0x10: [mem 0xdf32d000-0xdf32dfff 64bit]
  277. [ 0.111933] pci 0000:00:16.0: PME# supported from D3hot
  278. [ 0.112119] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
  279. [ 0.112140] pci 0000:00:17.0: reg 0x10: [mem 0xdf328000-0xdf329fff]
  280. [ 0.112149] pci 0000:00:17.0: reg 0x14: [mem 0xdf32c000-0xdf32c0ff]
  281. [ 0.112157] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
  282. [ 0.112165] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
  283. [ 0.112173] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
  284. [ 0.112182] pci 0000:00:17.0: reg 0x24: [mem 0xdf32b000-0xdf32b7ff]
  285. [ 0.112228] pci 0000:00:17.0: PME# supported from D3hot
  286. [ 0.112383] pci 0000:00:1c.0: [8086:9d11] type 01 class 0x060400
  287. [ 0.112456] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
  288. [ 0.112638] pci 0000:00:1c.3: [8086:9d13] type 01 class 0x060400
  289. [ 0.112711] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
  290. [ 0.112882] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400
  291. [ 0.112961] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
  292. [ 0.113147] pci 0000:00:1f.0: [8086:9d4e] type 00 class 0x060100
  293. [ 0.113400] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
  294. [ 0.113416] pci 0000:00:1f.2: reg 0x10: [mem 0xdf324000-0xdf327fff]
  295. [ 0.113599] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040300
  296. [ 0.113627] pci 0000:00:1f.3: reg 0x10: [mem 0xdf320000-0xdf323fff 64bit]
  297. [ 0.113654] pci 0000:00:1f.3: reg 0x20: [mem 0xdf300000-0xdf30ffff 64bit]
  298. [ 0.113706] pci 0000:00:1f.3: PME# supported from D3hot D3cold
  299. [ 0.113948] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
  300. [ 0.114008] pci 0000:00:1f.4: reg 0x10: [mem 0xdf32a000-0xdf32a0ff 64bit]
  301. [ 0.114077] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
  302. [ 0.114331] pci 0000:01:00.0: [10ec:5287] type 00 class 0xff0000
  303. [ 0.114360] pci 0000:01:00.0: reg 0x10: [mem 0xdf215000-0xdf215fff]
  304. [ 0.114407] pci 0000:01:00.0: reg 0x30: [mem 0xdf200000-0xdf20ffff pref]
  305. [ 0.114499] pci 0000:01:00.0: supports D1 D2
  306. [ 0.114500] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
  307. [ 0.114582] pci 0000:01:00.1: [10ec:8168] type 00 class 0x020000
  308. [ 0.114612] pci 0000:01:00.1: reg 0x10: [io 0xe000-0xe0ff]
  309. [ 0.114641] pci 0000:01:00.1: reg 0x18: [mem 0xdf214000-0xdf214fff 64bit]
  310. [ 0.114659] pci 0000:01:00.1: reg 0x20: [mem 0xdf210000-0xdf213fff 64bit]
  311. [ 0.114755] pci 0000:01:00.1: supports D1 D2
  312. [ 0.114756] pci 0000:01:00.1: PME# supported from D0 D1 D2 D3hot D3cold
  313. [ 0.118031] pci 0000:00:1c.0: PCI bridge to [bus 01]
  314. [ 0.118037] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
  315. [ 0.118040] pci 0000:00:1c.0: bridge window [mem 0xdf200000-0xdf2fffff]
  316. [ 0.118119] pci 0000:02:00.0: [8086:24fd] type 00 class 0x028000
  317. [ 0.118178] pci 0000:02:00.0: reg 0x10: [mem 0xdf100000-0xdf101fff 64bit]
  318. [ 0.118376] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
  319. [ 0.122042] pci 0000:00:1c.3: PCI bridge to [bus 02]
  320. [ 0.122049] pci 0000:00:1c.3: bridge window [mem 0xdf100000-0xdf1fffff]
  321. [ 0.122142] pci 0000:03:00.0: [1b21:1242] type 00 class 0x0c0330
  322. [ 0.122177] pci 0000:03:00.0: reg 0x10: [mem 0xdf000000-0xdf007fff 64bit]
  323. [ 0.122236] pci 0000:03:00.0: enabling Extended Tags
  324. [ 0.126065] pci 0000:00:1c.4: PCI bridge to [bus 03]
  325. [ 0.126072] pci 0000:00:1c.4: bridge window [mem 0xdf000000-0xdf0fffff]
  326. [ 0.127390] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
  327. [ 0.127452] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
  328. [ 0.127511] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
  329. [ 0.127569] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
  330. [ 0.127627] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
  331. [ 0.127684] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
  332. [ 0.127743] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
  333. [ 0.127800] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
  334. [ 0.128367] ACPI: EC: interrupt unblocked
  335. [ 0.128384] ACPI: EC: event unblocked
  336. [ 0.128398] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
  337. [ 0.128402] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
  338. [ 0.129011] pci 0000:00:02.0: vgaarb: setting as boot VGA device
  339. [ 0.129011] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
  340. [ 0.129016] pci 0000:00:02.0: vgaarb: bridge control possible
  341. [ 0.129018] vgaarb: loaded
  342. [ 0.129084] SCSI subsystem initialized
  343. [ 0.129101] libata version 3.00 loaded.
  344. [ 0.129101] ACPI: bus type USB registered
  345. [ 0.129101] usbcore: registered new interface driver usbfs
  346. [ 0.129101] usbcore: registered new interface driver hub
  347. [ 0.129101] usbcore: registered new device driver usb
  348. [ 0.129101] pps_core: LinuxPPS API ver. 1 registered
  349. [ 0.129101] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  350. [ 0.129101] PTP clock support registered
  351. [ 0.129114] EDAC MC: Ver: 3.0.0
  352. [ 0.129114] Registered efivars operations
  353. [ 0.142284] Advanced Linux Sound Architecture Driver Initialized.
  354. [ 0.142296] PCI: Using ACPI for IRQ routing
  355. [ 0.170222] PCI: pci_cache_line_size set to 64 bytes
  356. [ 0.170302] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
  357. [ 0.170304] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
  358. [ 0.170305] e820: reserve RAM buffer [mem 0x832d6000-0x83ffffff]
  359. [ 0.170306] e820: reserve RAM buffer [mem 0x892bd000-0x8bffffff]
  360. [ 0.170307] e820: reserve RAM buffer [mem 0x8a6a4000-0x8bffffff]
  361. [ 0.170308] e820: reserve RAM buffer [mem 0x8afff000-0x8bffffff]
  362. [ 0.170309] e820: reserve RAM buffer [mem 0x46f000000-0x46fffffff]
  363. [ 0.171011] NetLabel: Initializing
  364. [ 0.171011] NetLabel: domain hash size = 128
  365. [ 0.171011] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
  366. [ 0.171028] NetLabel: unlabeled traffic allowed by default
  367. [ 0.171067] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
  368. [ 0.171074] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
  369. [ 0.173022] clocksource: Switched to clocksource hpet
  370. [ 0.180646] VFS: Disk quotas dquot_6.6.0
  371. [ 0.180663] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  372. [ 0.183736] pnp: PnP ACPI init
  373. [ 0.183951] system 00:00: [io 0x0680-0x069f] has been reserved
  374. [ 0.183956] system 00:00: [io 0xffff] has been reserved
  375. [ 0.183959] system 00:00: [io 0xffff] has been reserved
  376. [ 0.183962] system 00:00: [io 0xffff] has been reserved
  377. [ 0.183965] system 00:00: [io 0x1800-0x18fe] has been reserved
  378. [ 0.183968] system 00:00: [io 0x164e-0x164f] has been reserved
  379. [ 0.183971] system 00:00: [io 0x3322-0x3323] has been reserved
  380. [ 0.183977] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
  381. [ 0.184118] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
  382. [ 0.184157] system 00:02: [io 0x1854-0x1857] has been reserved
  383. [ 0.184163] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
  384. [ 0.184184] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
  385. [ 0.184316] pnp 00:04: Plug and Play ACPI device, IDs SYN1222 PNP0f13 (active)
  386. [ 0.184593] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
  387. [ 0.184597] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
  388. [ 0.184600] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
  389. [ 0.184603] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
  390. [ 0.184606] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
  391. [ 0.184609] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
  392. [ 0.184611] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
  393. [ 0.184615] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
  394. [ 0.184618] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
  395. [ 0.184621] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
  396. [ 0.184626] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
  397. [ 0.184668] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
  398. [ 0.184671] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
  399. [ 0.184674] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
  400. [ 0.184677] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
  401. [ 0.184680] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
  402. [ 0.184683] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
  403. [ 0.184686] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
  404. [ 0.184691] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
  405. [ 0.185062] system 00:07: [io 0xff00-0xfffe] has been reserved
  406. [ 0.185067] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
  407. [ 0.186396] system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved
  408. [ 0.186400] system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved
  409. [ 0.186403] system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved
  410. [ 0.186409] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
  411. [ 0.187082] pnp: PnP ACPI: found 9 devices
  412. [ 0.191637] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
  413. [ 0.191664] pci 0000:00:1c.0: PCI bridge to [bus 01]
  414. [ 0.191667] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
  415. [ 0.191673] pci 0000:00:1c.0: bridge window [mem 0xdf200000-0xdf2fffff]
  416. [ 0.191681] pci 0000:00:1c.3: PCI bridge to [bus 02]
  417. [ 0.191686] pci 0000:00:1c.3: bridge window [mem 0xdf100000-0xdf1fffff]
  418. [ 0.191694] pci 0000:00:1c.4: PCI bridge to [bus 03]
  419. [ 0.191699] pci 0000:00:1c.4: bridge window [mem 0xdf000000-0xdf0fffff]
  420. [ 0.191708] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
  421. [ 0.191709] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
  422. [ 0.191711] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
  423. [ 0.191712] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
  424. [ 0.191713] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
  425. [ 0.191714] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
  426. [ 0.191716] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
  427. [ 0.191717] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
  428. [ 0.191718] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
  429. [ 0.191719] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
  430. [ 0.191720] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
  431. [ 0.191722] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
  432. [ 0.191723] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
  433. [ 0.191724] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
  434. [ 0.191725] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
  435. [ 0.191726] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
  436. [ 0.191727] pci_bus 0000:00: resource 20 [mem 0x90000000-0xdfffffff window]
  437. [ 0.191729] pci_bus 0000:00: resource 21 [mem 0xfd000000-0xfe7fffff window]
  438. [ 0.191730] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
  439. [ 0.191731] pci_bus 0000:01: resource 1 [mem 0xdf200000-0xdf2fffff]
  440. [ 0.191733] pci_bus 0000:02: resource 1 [mem 0xdf100000-0xdf1fffff]
  441. [ 0.191734] pci_bus 0000:03: resource 1 [mem 0xdf000000-0xdf0fffff]
  442. [ 0.191866] NET: Registered protocol family 2
  443. [ 0.192049] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  444. [ 0.192273] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  445. [ 0.192393] TCP: Hash tables configured (established 131072 bind 65536)
  446. [ 0.192433] UDP hash table entries: 8192 (order: 6, 262144 bytes)
  447. [ 0.192482] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
  448. [ 0.192557] NET: Registered protocol family 1
  449. [ 0.192572] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
  450. [ 0.193043] PCI: CLS 64 bytes, default 64
  451. [ 0.193085] DMAR: Host address width 39
  452. [ 0.193089] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
  453. [ 0.193098] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
  454. [ 0.193102] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
  455. [ 0.193107] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
  456. [ 0.193111] DMAR: RMRR base: 0x00000089ac5000 end: 0x00000089ae4fff
  457. [ 0.193113] DMAR: RMRR base: 0x0000008b800000 end: 0x0000008fffffff
  458. [ 0.193124] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
  459. [ 0.193128] software IO TLB [mem 0x7e134000-0x82134000] (64MB) mapped at [ffff9d7e7e134000-ffff9d7e82133fff]
  460. [ 0.193343] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
  461. [ 0.193346] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
  462. [ 0.193348] RAPL PMU: hw unit of domain package 2^-14 Joules
  463. [ 0.193350] RAPL PMU: hw unit of domain dram 2^-14 Joules
  464. [ 0.193352] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
  465. [ 0.193354] RAPL PMU: hw unit of domain psys 2^-14 Joules
  466. [ 0.193738] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x396d519840e, max_idle_ns: 881590569543 ns
  467. [ 0.194926] Scanning for low memory corruption every 60 seconds
  468. [ 0.195121] audit: initializing netlink subsys (disabled)
  469. [ 0.195194] audit: type=2000 audit(1514401143.195:1): state=initialized audit_enabled=0 res=1
  470. [ 0.195583] workingset: timestamp_bits=56 max_order=22 bucket_order=0
  471. [ 0.196960] SELinux: Registering netfilter hooks
  472. [ 0.197914] cryptomgr_test (68) used greatest stack depth: 15464 bytes left
  473. [ 0.198308] cryptomgr_test (74) used greatest stack depth: 15272 bytes left
  474. [ 0.198363] cryptomgr_test (75) used greatest stack depth: 15248 bytes left
  475. [ 0.199525] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
  476. [ 0.199529] io scheduler noop registered
  477. [ 0.199531] io scheduler deadline registered
  478. [ 0.199569] io scheduler cfq registered (default)
  479. [ 0.199572] io scheduler mq-deadline registered
  480. [ 0.199574] io scheduler kyber registered
  481. [ 0.200230] pcieport 0000:00:1c.0: AER enabled with IRQ 120
  482. [ 0.200255] pcieport 0000:00:1c.3: AER enabled with IRQ 121
  483. [ 0.200276] pcieport 0000:00:1c.4: AER enabled with IRQ 122
  484. [ 0.217135] Non-volatile memory driver v1.3
  485. [ 0.217174] Linux agpgart interface v0.103
  486. [ 0.217195] efifb: probing for efifb
  487. [ 0.217205] efifb: framebuffer at 0xc0000000, using 8128k, total 8128k
  488. [ 0.217208] efifb: mode is 1920x1080x32, linelength=7680, pages=1
  489. [ 0.217210] efifb: scrolling: redraw
  490. [ 0.217213] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
  491. [ 0.526377] Console: switching to colour frame buffer device 240x67
  492. [ 0.820475] fb0: EFI VGA frame buffer device
  493. [ 0.823426] ACPI: AC Adapter [AC] (on-line)
  494. [ 0.824415] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
  495. [ 0.826265] ACPI: Power Button [PWRB]
  496. [ 0.827105] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
  497. [ 0.828942] ACPI: Sleep Button [SLPB]
  498. [ 0.829822] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
  499. [ 0.831659] ACPI: Lid Switch [LID0]
  500. [ 0.832462] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
  501. [ 0.834291] ACPI: Power Button [PWRF]
  502. [ 0.835441] Monitor-Mwait will be used to enter C-1 state
  503. [ 0.835473] Monitor-Mwait will be used to enter C-2 state
  504. [ 0.835503] Monitor-Mwait will be used to enter C-3 state
  505. [ 0.837487] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
  506. [ 0.840193] thermal LNXTHERM:00: registered as thermal_zone0
  507. [ 0.841434] ACPI: Thermal Zone [TZ0] (50 C)
  508. [ 0.842928] ACPI: Battery Slot [BAT0] (battery present)
  509. [ 0.845373] [drm] Memory usable by graphics device = 4096M
  510. [ 0.846582] checking generic (c0000000 7f0000) vs hw (c0000000 10000000)
  511. [ 0.846583] fb: switching to inteldrmfb from EFI VGA
  512. [ 0.847691] Console: switching to colour dummy device 80x25
  513. [ 0.847788] [drm] Replacing VGA console driver
  514. [ 0.854067] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  515. [ 0.854070] [drm] Driver supports precise vblank timestamp query.
  516. [ 0.856215] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
  517. [ 0.856254] i915 0000:00:02.0: Direct firmware load for i915/kbl_dmc_ver1_01.bin failed with error -2
  518. [ 0.856258] i915 0000:00:02.0: Failed to load DMC firmware [https://01.org/linuxgraphics/downloads/firmware], disabling runtime power management.
  519. [ 0.883860] [drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 0
  520. [ 0.884097] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
  521. [ 0.884516] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
  522. [ 0.886935] loop: module loaded
  523. [ 0.886986] ahci 0000:00:17.0: version 3.0
  524. [ 0.897412] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
  525. [ 0.897420] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
  526. [ 0.898044] scsi host0: ahci
  527. [ 0.898350] scsi host1: ahci
  528. [ 0.898390] ata1: SATA max UDMA/133 abar m2048@0xdf32b000 port 0xdf32b100 irq 124
  529. [ 0.898394] ata2: SATA max UDMA/133 abar m2048@0xdf32b000 port 0xdf32b180 irq 124
  530. [ 0.898473] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
  531. [ 0.898476] e100: Copyright(c) 1999-2006 Intel Corporation
  532. [ 0.898486] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
  533. [ 0.898489] e1000: Copyright (c) 1999-2006 Intel Corporation.
  534. [ 0.898500] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  535. [ 0.898502] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  536. [ 0.898515] sky2: driver version 1.30
  537. [ 0.898549] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
  538. [ 0.898558] r8169 0000:01:00.1: can't disable ASPM; OS doesn't have ASPM control
  539. [ 0.902098] r8169 0000:01:00.1 eth0: RTL8411 at 0xffffaac4c1979000, 80:fa:5b:4b:70:0e, XID 1c800880 IRQ 125
  540. [ 0.902106] r8169 0000:01:00.1 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
  541. [ 0.902329] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  542. [ 0.902334] ehci-pci: EHCI PCI platform driver
  543. [ 0.902348] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  544. [ 0.902355] ohci-pci: OHCI PCI platform driver
  545. [ 0.902364] uhci_hcd: USB Universal Host Controller Interface driver
  546. [ 0.902536] xhci_hcd 0000:00:14.0: xHCI Host Controller
  547. [ 0.902603] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
  548. [ 0.903756] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
  549. [ 0.903763] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
  550. [ 0.903850] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  551. [ 0.903854] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  552. [ 0.903857] usb usb1: Product: xHCI Host Controller
  553. [ 0.903859] usb usb1: Manufacturer: Linux 4.14.8-gentoo-r1 xhci-hcd
  554. [ 0.903862] usb usb1: SerialNumber: 0000:00:14.0
  555. [ 0.903990] hub 1-0:1.0: USB hub found
  556. [ 0.904035] hub 1-0:1.0: 12 ports detected
  557. [ 0.904522] xhci_hcd 0000:00:14.0: xHCI Host Controller
  558. [ 0.904582] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
  559. [ 0.904613] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
  560. [ 0.904616] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  561. [ 0.904619] usb usb2: Product: xHCI Host Controller
  562. [ 0.904621] usb usb2: Manufacturer: Linux 4.14.8-gentoo-r1 xhci-hcd
  563. [ 0.904624] usb usb2: SerialNumber: 0000:00:14.0
  564. [ 0.904728] hub 2-0:1.0: USB hub found
  565. [ 0.904740] hub 2-0:1.0: 6 ports detected
  566. [ 0.906198] usb: port power management may be unreliable
  567. [ 0.906552] xhci_hcd 0000:03:00.0: xHCI Host Controller
  568. [ 0.906668] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
  569. [ 0.965579] xhci_hcd 0000:03:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x00000010
  570. [ 0.965882] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  571. [ 0.965887] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  572. [ 0.965891] usb usb3: Product: xHCI Host Controller
  573. [ 0.965894] usb usb3: Manufacturer: Linux 4.14.8-gentoo-r1 xhci-hcd
  574. [ 0.965897] usb usb3: SerialNumber: 0000:03:00.0
  575. [ 0.966157] hub 3-0:1.0: USB hub found
  576. [ 0.966179] hub 3-0:1.0: 2 ports detected
  577. [ 0.966442] xhci_hcd 0000:03:00.0: xHCI Host Controller
  578. [ 0.966586] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
  579. [ 0.966596] xhci_hcd 0000:03:00.0: Host supports USB 3.1 Enhanced SuperSpeed
  580. [ 0.966689] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
  581. [ 0.966739] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
  582. [ 0.966747] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  583. [ 0.966751] usb usb4: Product: xHCI Host Controller
  584. [ 0.966754] usb usb4: Manufacturer: Linux 4.14.8-gentoo-r1 xhci-hcd
  585. [ 0.966757] usb usb4: SerialNumber: 0000:03:00.0
  586. [ 0.966974] hub 4-0:1.0: USB hub found
  587. [ 0.966992] hub 4-0:1.0: 2 ports detected
  588. [ 0.967274] usbcore: registered new interface driver usblp
  589. [ 0.967308] usbcore: registered new interface driver usb-storage
  590. [ 0.967366] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:SYNM] at 0x60,0x64 irq 1,12
  591. [ 0.971440] i8042: Detected active multiplexing controller, rev 1.1
  592. [ 0.973486] serio: i8042 KBD port at 0x60,0x64 irq 1
  593. [ 0.973493] serio: i8042 AUX0 port at 0x60,0x64 irq 12
  594. [ 0.973541] serio: i8042 AUX1 port at 0x60,0x64 irq 12
  595. [ 0.973583] serio: i8042 AUX2 port at 0x60,0x64 irq 12
  596. [ 0.973618] serio: i8042 AUX3 port at 0x60,0x64 irq 12
  597. [ 0.974284] rtc_cmos 00:01: RTC can wake from S4
  598. [ 0.974844] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
  599. [ 0.974936] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
  600. [ 0.975140] i801_smbus 0000:00:1f.4: SPD Write Disable is set
  601. [ 0.975171] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
  602. [ 0.976959] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
  603. [ 0.976967] intel_pstate: Intel P-state driver initializing
  604. [ 0.977107] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
  605. [ 0.978080] intel_pstate: HWP enabled
  606. [ 0.978085] EFI Variables Facility v0.08 2004-May-17
  607. [ 0.994377] hidraw: raw HID events driver (C) Jiri Kosina
  608. [ 0.994390] usbcore: registered new interface driver usbhid
  609. [ 0.994392] usbhid: USB HID core driver
  610. [ 0.994493] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
  611. [ 0.994548] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops 0xffffffff8ee80be0)
  612. [ 0.994576] usbcore: registered new interface driver snd-usb-audio
  613. [ 0.994593] Netfilter messages via NETLINK v0.30.
  614. [ 0.994676] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
  615. [ 0.994684] kworker/u16:3 (106) used greatest stack depth: 14816 bytes left
  616. [ 0.994702] ctnetlink v0.93: registering with nfnetlink.
  617. [ 0.994756] ip_tables: (C) 2000-2006 Netfilter Core Team
  618. [ 1.013555] hdaudio hdaudioC0D0: Unable to bind the codec
  619. [ 1.013622] hdaudio hdaudioC0D2: Unable to bind the codec
  620. [ 1.525828] clocksource: Switched to clocksource tsc
  621. [ 1.525829] usb 1-5: new high-speed USB device number 2 using xhci_hcd
  622. [ 1.525856] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  623. [ 1.525872] fbcon: inteldrmfb (fb0) is primary device
  624. [ 1.525875] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  625. [ 1.526012] Initializing XFRM netlink socket
  626. [ 1.526070] NET: Registered protocol family 10
  627. [ 1.526192] Segment Routing with IPv6
  628. [ 1.526203] ip6_tables: (C) 2000-2006 Netfilter Core Team
  629. [ 1.526323] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  630. [ 1.526381] NET: Registered protocol family 17
  631. [ 1.526469] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
  632. [ 1.526470] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
  633. [ 1.526471] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
  634. [ 1.526596] microcode: sig=0x806ea, pf=0x80, revision=0x66
  635. [ 1.526626] microcode: Microcode Update Driver: v2.2.
  636. [ 1.526630] sched_clock: Marking stable (1526623551, 0)->(1530030574, -3407023)
  637. [ 1.526652] ata1.00: supports DRM functions and may not be fully accessible
  638. [ 1.526728] registered taskstats version 1
  639. [ 1.527205] Magic number: 13:419:1000
  640. [ 1.527207] misc memory_bandwidth: hash matches
  641. [ 1.527242] system 00:02: hash matches
  642. [ 1.527372] ata1.00: ATA-10: Crucial_CT275MX300SSD1, M0CR060, max UDMA/133
  643. [ 1.527372] ata1.00: 537234768 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
  644. [ 1.529670] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
  645. [ 1.529671] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
  646. [ 1.529672] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
  647. [ 1.529847] ata1.00: supports DRM functions and may not be fully accessible
  648. [ 1.530036] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
  649. [ 1.530037] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
  650. [ 1.530038] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
  651. [ 1.531925] ata2.00: ATAPI: HL-DT-ST DVDRAM GUD0N, 1.00, max UDMA/133
  652. [ 1.532449] ata1.00: configured for UDMA/133
  653. [ 1.535919] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
  654. [ 1.535921] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
  655. [ 1.535922] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
  656. [ 1.539183] ata2.00: configured for UDMA/133
  657. [ 1.674199] usb 1-5: New USB device found, idVendor=04f2, idProduct=b59e
  658. [ 1.674200] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
  659. [ 1.674200] usb 1-5: Product: Chicony USB2.0 Camera
  660. [ 1.674201] usb 1-5: Manufacturer: Chicony Electronics Co.,Ltd.
  661. [ 1.674201] usb 1-5: SerialNumber: 200901010001
  662. [ 1.791330] usb 1-7: new full-speed USB device number 3 using xhci_hcd
  663. [ 1.920402] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2b
  664. [ 1.920403] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  665. [ 2.651413] psmouse serio2: synaptics: queried max coordinates: x [..5674], y [..4764]
  666. [ 2.719645] [drm] RC6 on
  667. [ 2.767512] psmouse serio2: synaptics: queried min coordinates: x [1266..], y [1086..]
  668. [ 2.767513] psmouse serio2: synaptics: The touchpad can support a better bus than the too old PS/2 protocol. Make sure MOUSE_PS2_SYNAPTICS_SMBUS and RMI4_SMB are enabled to get a better touchpad experience.
  669. [ 2.853877] Console: switching to colour frame buffer device 240x67
  670. [ 2.913992] psmouse serio2: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf00223/0x840300/0x26800/0x0, board id: 3189, fw id: 2302754
  671. [ 2.953051] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input11
  672. [ 3.207781] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
  673. [ 3.208008] scsi 0:0:0:0: Direct-Access ATA Crucial_CT275MX3 R060 PQ: 0 ANSI: 5
  674. [ 3.208102] ata1.00: Enabling discard_zeroes_data
  675. [ 3.208122] sd 0:0:0:0: [sda] 537234768 512-byte logical blocks: (275 GB/256 GiB)
  676. [ 3.208126] sd 0:0:0:0: [sda] Write Protect is off
  677. [ 3.208127] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  678. [ 3.208130] sd 0:0:0:0: Attached scsi generic sg0 type 0
  679. [ 3.208133] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  680. [ 3.208200] ata1.00: Enabling discard_zeroes_data
  681. [ 3.209284] sda: sda1 sda2
  682. [ 3.209436] ata1.00: Enabling discard_zeroes_data
  683. [ 3.209465] sd 0:0:0:0: [sda] Attached SCSI disk
  684. [ 3.209803] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GUD0N 1.00 PQ: 0 ANSI: 5
  685. [ 3.282161] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
  686. [ 3.282162] cdrom: Uniform CD-ROM driver Revision: 3.20
  687. [ 3.282248] sr 1:0:0:0: Attached scsi CD-ROM sr0
  688. [ 3.282322] sr 1:0:0:0: Attached scsi generic sg1 type 5
  689. [ 3.658340] console [netcon0] enabled
  690. [ 3.687493] netconsole: network logging started
  691. [ 3.716651] ALSA device list:
  692. [ 3.745516] No soundcards found.
  693. [ 3.774223] md: Waiting for all devices to be available before autodetect
  694. [ 3.803394] md: If you don't use raid, use raid=noautodetect
  695. [ 3.832848] md: Autodetecting RAID arrays.
  696. [ 3.861995] md: autorun ...
  697. [ 3.890866] md: ... autorun DONE.
  698. [ 3.919837] EXT4-fs (sda2): couldn't mount as ext3 due to feature incompatibilities
  699. [ 3.949014] EXT4-fs (sda2): couldn't mount as ext2 due to feature incompatibilities
  700. [ 3.982006] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
  701. [ 4.010613] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
  702. [ 4.040130] devtmpfs: mounted
  703. [ 4.069105] Freeing unused kernel memory: 1136K
  704. [ 4.097323] Write protecting the kernel read-only data: 14336k
  705. [ 4.126100] Freeing unused kernel memory: 1100K
  706. [ 4.155996] Freeing unused kernel memory: 1240K
  707. [ 4.263877] kbd_mode (122) used greatest stack depth: 14192 bytes left
  708. [ 4.303604] init-early.sh (121) used greatest stack depth: 13080 bytes left
  709. [ 4.474618] mount (132) used greatest stack depth: 13024 bytes left
  710. [ 30.335959] random: crng init done
  711. [ 314.440554] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  712. [ 439.828023] EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr,discard
  713.  
Powered by spacepaste. Paste removal.