-
- $ cat Xorg.0.log
- [ 51.121]
- X.Org X Server 1.19.3
- Release Date: 2017-03-15
- [ 51.121] X Protocol Version 11, Revision 0
- [ 51.121] Build Operating System: Linux 4.4.6-gentoo x86_64 Gentoo
- [ 51.121] Current Operating System: Linux lappi 4.9.16-gentoo #2 SMP Mon Jul 3 23:36:29 CEST 2017 x86_64
- [ 51.121] Kernel command line: root=/dev/ram0 crypt_root=/dev/disk/by-uuid/4b24b732-067b-4e79-9621-4b634495d9a8 dolvm real_root=/dev/mapper/vg1-root rootfstype=ext4 real_init=/sbin/init root_keydev=/dev/disk/by-partuuid/8f4232f1-dda0-480a-96b1-1345a3e9ecc0 root_key=luks-key.gpg real_resume=/dev/mapper/vg1-swap keymap=de
- [ 51.121] Build Date: 29 June 2017 04:41:15AM
- [ 51.122]
- [ 51.123] Current version of pixman: 0.34.0
- [ 51.126] Before reporting problems, check http://wiki.x.org
- to make sure that you have the latest version.
- [ 51.126] Markers: (--) probed, (**) from config file, (==) default setting,
- (++) from command line, (!!) notice, (II) informational,
- (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
- [ 51.130] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jul 4 20:34:26 2017
- [ 51.137] (==) Using config file: "/etc/X11/xorg.conf"
- [ 51.139] (==) Using config directory: "/etc/X11/xorg.conf.d"
- [ 51.140] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
- [ 51.144] (==) No Layout section. Using the first Screen section.
- [ 51.144] (==) No screen section available. Using defaults.
- [ 51.144] (**) |-->Screen "Default Screen Section" (0)
- [ 51.144] (**) | |-->Monitor "<default monitor>"
- [ 51.144] (==) No device specified for screen "Default Screen Section".
- Using the first device section listed.
- [ 51.144] (**) | |-->Device "intel"
- [ 51.144] (==) No monitor specified for screen "Default Screen Section".
- Using a default monitor configuration.
- [ 51.144] (==) Automatically adding devices
- [ 51.144] (==) Automatically enabling devices
- [ 51.144] (==) Automatically adding GPU devices
- [ 51.144] (==) Max clients allowed: 256, resource mask: 0x1fffff
- [ 51.147] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
- [ 51.147] Entry deleted from font path.
- [ 51.147] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
- [ 51.147] Entry deleted from font path.
- [ 51.147] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
- [ 51.147] Entry deleted from font path.
- [ 51.149] (==) FontPath set to:
- /usr/share/fonts/misc/,
- /usr/share/fonts/100dpi/,
- /usr/share/fonts/75dpi/
- [ 51.149] (==) ModulePath set to "/usr/lib64/xorg/modules"
- [ 51.149] (II) The server relies on udev to provide the list of input devices.
- If no devices become available, reconfigure udev or disable AutoAddDevices.
- [ 51.149] (II) Loader magic: 0x811cc0
- [ 51.149] (II) Module ABI versions:
- [ 51.149] X.Org ANSI C Emulation: 0.4
- [ 51.149] X.Org Video Driver: 23.0
- [ 51.149] X.Org XInput driver : 24.1
- [ 51.149] X.Org Server Extension : 10.0
- [ 51.149] (II) xfree86: Adding drm device (/dev/dri/card0)
- [ 51.161] (--) PCI:*(0:0:2:0) 8086:0126:103c:162a rev 9, Mem @ 0xd4000000/4194304, 0xc0000000/268435456, I/O @ 0x00004000/64, BIOS @ 0x????????/131072
- [ 51.161] (II) LoadModule: "glx"
- [ 51.171] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
- [ 51.216] (II) Module glx: vendor="X.Org Foundation"
- [ 51.216] compiled for 1.19.3, module version = 1.0.0
- [ 51.217] ABI class: X.Org Server Extension, version 10.0
- [ 51.217] (II) LoadModule: "intel"
- [ 51.217] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
- [ 51.226] (II) Module intel: vendor="X.Org Foundation"
- [ 51.226] compiled for 1.19.3, module version = 2.99.917
- [ 51.226] Module class: X.Org Video Driver
- [ 51.226] ABI class: X.Org Video Driver, version 23.0
- [ 51.226] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
- i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
- 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
- Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
- GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
- [ 51.226] (II) intel: Driver for Intel(R) HD Graphics
- [ 51.226] (II) intel: Driver for Intel(R) Iris(TM) Graphics
- [ 51.226] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
- [ 51.226] (--) using VT number 7
-
- [ 51.259] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160919
- [ 51.267] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 3000
- [ 51.267] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx; using a maximum of 2 threads
- [ 51.267] (II) intel(0): Creating default Display subsection in Screen section
- "Default Screen Section" for depth/fbbpp 24/32
- [ 51.267] (==) intel(0): Depth 24, (--) framebuffer bpp 32
- [ 51.267] (==) intel(0): RGB weight 888
- [ 51.267] (==) intel(0): Default visual is TrueColor
- [ 51.268] (II) intel(0): Output LVDS1 has no monitor section
- [ 51.268] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output LVDS1
- [ 51.268] (II) intel(0): Enabled output LVDS1
- [ 51.268] (II) intel(0): Output VGA1 has no monitor section
- [ 51.268] (II) intel(0): Enabled output VGA1
- [ 51.268] (II) intel(0): Output HDMI1 has no monitor section
- [ 51.269] (II) intel(0): Enabled output HDMI1
- [ 51.269] (II) intel(0): Output DP1 has no monitor section
- [ 51.269] (II) intel(0): Enabled output DP1
- [ 51.269] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
- [ 51.269] (II) intel(0): Output VIRTUAL1 has no monitor section
- [ 51.269] (II) intel(0): Enabled output VIRTUAL1
- [ 51.269] (--) intel(0): Output LVDS1 using initial mode 1280x800 on pipe 0
- [ 51.269] (==) intel(0): TearFree disabled
- [ 51.269] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
- [ 51.269] (==) intel(0): DPI set to (96, 96)
- [ 51.269] (II) Loading sub module "dri3"
- [ 51.269] (II) LoadModule: "dri3"
- [ 51.269] (II) Module "dri3" already built-in
- [ 51.269] (II) Loading sub module "dri2"
- [ 51.269] (II) LoadModule: "dri2"
- [ 51.269] (II) Module "dri2" already built-in
- [ 51.269] (II) Loading sub module "present"
- [ 51.269] (II) LoadModule: "present"
- [ 51.269] (II) Module "present" already built-in
- [ 51.270] (==) Depth 24 pixmap format is 32 bpp
- [ 51.287] (II) intel(0): SNA initialized with Sandybridge (gen6, gt2) backend
- [ 51.287] (==) intel(0): Backing store enabled
- [ 51.287] (==) intel(0): Silken mouse enabled
- [ 51.290] (II) intel(0): HW Cursor enabled
- [ 51.290] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
- [ 51.292] (==) intel(0): DPMS enabled
- [ 51.293] (==) intel(0): Display hotplug detection enabled
- [ 51.293] (II) intel(0): [DRI2] Setup complete
- [ 51.293] (II) intel(0): [DRI2] DRI driver: i965
- [ 51.293] (II) intel(0): [DRI2] VDPAU driver: va_gl
- [ 51.293] (II) intel(0): direct rendering: DRI2 enabled
- [ 51.293] (II) intel(0): hardware support for Present enabled
- [ 51.293] (--) RandR disabled
- [ 51.381] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
- [ 51.381] (II) AIGLX: enabled GLX_ARB_create_context
- [ 51.381] (II) AIGLX: enabled GLX_ARB_create_context_profile
- [ 51.381] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
- [ 51.381] (II) AIGLX: enabled GLX_INTEL_swap_event
- [ 51.381] (II) AIGLX: enabled GLX_SGI_swap_control
- [ 51.381] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
- [ 51.381] (II) AIGLX: enabled GLX_ARB_fbconfig_float
- [ 51.381] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
- [ 51.381] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
- [ 51.381] (II) AIGLX: enabled GLX_ARB_create_context_robustness
- [ 51.381] (II) AIGLX: Loaded and initialized i965
- [ 51.381] (II) GLX: Initialized DRI2 GL provider for screen 0
- [ 51.386] (II) intel(0): switch to mode 1280x800@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
- [ 51.393] (II) intel(0): Setting screen physical size to 338 x 211
- [ 51.480] (II) config/udev: Adding input device Power Button (/dev/input/event2)
- [ 51.480] (**) Power Button: Applying InputClass "evdev keyboard catchall"
- [ 51.480] (**) Power Button: Applying InputClass "system-keyboard"
- [ 51.480] (II) LoadModule: "evdev"
- [ 51.480] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
- [ 51.488] (II) Module evdev: vendor="X.Org Foundation"
- [ 51.488] compiled for 1.19.3, module version = 2.10.5
- [ 51.488] Module class: X.Org XInput Driver
- [ 51.488] ABI class: X.Org XInput driver, version 24.1
- [ 51.488] (II) Using input driver 'evdev' for 'Power Button'
- [ 51.488] (**) Power Button: always reports core events
- [ 51.488] (**) evdev: Power Button: Device: "/dev/input/event2"
- [ 51.488] (--) evdev: Power Button: Vendor 0 Product 0x1
- [ 51.488] (--) evdev: Power Button: Found keys
- [ 51.488] (II) evdev: Power Button: Configuring as keyboard
- [ 51.488] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event2"
- [ 51.488] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
- [ 51.488] (**) Option "xkb_rules" "evdev"
- [ 51.488] (**) Option "xkb_layout" "de"
- [ 51.531] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
- [ 51.531] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
- [ 51.531] (**) Video Bus: Applying InputClass "system-keyboard"
- [ 51.531] (II) Using input driver 'evdev' for 'Video Bus'
- [ 51.531] (**) Video Bus: always reports core events
- [ 51.531] (**) evdev: Video Bus: Device: "/dev/input/event4"
- [ 51.531] (--) evdev: Video Bus: Vendor 0 Product 0x6
- [ 51.531] (--) evdev: Video Bus: Found keys
- [ 51.531] (II) evdev: Video Bus: Configuring as keyboard
- [ 51.531] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input10/event4"
- [ 51.531] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
- [ 51.531] (**) Option "xkb_rules" "evdev"
- [ 51.531] (**) Option "xkb_layout" "de"
- [ 51.532] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
- [ 51.532] (II) No input driver specified, ignoring this device.
- [ 51.532] (II) This device may have been added with another device file.
- [ 51.532] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
- [ 51.532] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
- [ 51.532] (**) Sleep Button: Applying InputClass "system-keyboard"
- [ 51.532] (II) Using input driver 'evdev' for 'Sleep Button'
- [ 51.532] (**) Sleep Button: always reports core events
- [ 51.532] (**) evdev: Sleep Button: Device: "/dev/input/event0"
- [ 51.532] (--) evdev: Sleep Button: Vendor 0 Product 0x3
- [ 51.532] (--) evdev: Sleep Button: Found keys
- [ 51.532] (II) evdev: Sleep Button: Configuring as keyboard
- [ 51.532] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6/event0"
- [ 51.532] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
- [ 51.532] (**) Option "xkb_rules" "evdev"
- [ 51.532] (**) Option "xkb_layout" "de"
- [ 51.533] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event5)
- [ 51.533] (II) No input driver specified, ignoring this device.
- [ 51.533] (II) This device may have been added with another device file.
- [ 51.533] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event6)
- [ 51.533] (II) No input driver specified, ignoring this device.
- [ 51.533] (II) This device may have been added with another device file.
- [ 51.534] (II) config/udev: Adding input device HDA Intel PCH Dock Line Out (/dev/input/event7)
- [ 51.534] (II) No input driver specified, ignoring this device.
- [ 51.534] (II) This device may have been added with another device file.
- [ 51.534] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event8)
- [ 51.534] (II) No input driver specified, ignoring this device.
- [ 51.534] (II) This device may have been added with another device file.
- [ 51.534] (II) config/udev: Adding input device HDA Intel PCH HDMI (/dev/input/event9)
- [ 51.534] (II) No input driver specified, ignoring this device.
- [ 51.534] (II) This device may have been added with another device file.
- [ 51.534] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event11)
- [ 51.534] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
- [ 51.534] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
- [ 51.534] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
- [ 51.534] (**) AT Translated Set 2 keyboard: always reports core events
- [ 51.534] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event11"
- [ 51.534] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
- [ 51.534] (--) evdev: AT Translated Set 2 keyboard: Found keys
- [ 51.534] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
- [ 51.535] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input16/event11"
- [ 51.535] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
- [ 51.535] (**) Option "xkb_rules" "evdev"
- [ 51.535] (**) Option "xkb_layout" "de"
- [ 51.535] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event12)
- [ 51.535] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
- [ 51.535] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
- [ 51.535] (**) PS/2 Generic Mouse: always reports core events
- [ 51.535] (**) evdev: PS/2 Generic Mouse: Device: "/dev/input/event12"
- [ 51.535] (--) evdev: PS/2 Generic Mouse: Vendor 0x2 Product 0x1
- [ 51.535] (--) evdev: PS/2 Generic Mouse: Found 3 mouse buttons
- [ 51.535] (--) evdev: PS/2 Generic Mouse: Found relative axes
- [ 51.535] (--) evdev: PS/2 Generic Mouse: Found x and y relative axes
- [ 51.535] (II) evdev: PS/2 Generic Mouse: Configuring as mouse
- [ 51.535] (**) evdev: PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
- [ 51.535] (**) evdev: PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
- [ 51.535] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input20/event12"
- [ 51.535] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 10)
- [ 51.535] (II) evdev: PS/2 Generic Mouse: initialized for relative axes.
- [ 51.535] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
- [ 51.535] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
- [ 51.535] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
- [ 51.535] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
- [ 51.536] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse1)
- [ 51.536] (II) No input driver specified, ignoring this device.
- [ 51.536] (II) This device may have been added with another device file.
- [ 51.536] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event10)
- [ 51.536] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
- [ 51.536] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
- [ 51.536] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
- [ 51.536] (II) LoadModule: "synaptics"
- [ 51.536] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
- [ 51.539] (II) Module synaptics: vendor="X.Org Foundation"
- [ 51.539] compiled for 1.19.3, module version = 1.9.0
- [ 51.539] Module class: X.Org XInput Driver
- [ 51.539] ABI class: X.Org XInput driver, version 24.1
- [ 51.539] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
- [ 51.539] (**) SynPS/2 Synaptics TouchPad: always reports core events
- [ 51.539] (**) Option "Device" "/dev/input/event10"
- [ 51.630] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
- [ 51.630] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5932 (res 75)
- [ 51.630] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 5164 (res 219)
- [ 51.630] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
- [ 51.630] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
- [ 51.630] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
- [ 51.630] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
- [ 51.630] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
- [ 51.630] (**) SynPS/2 Synaptics TouchPad: always reports core events
- [ 51.730] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input5/event10"
- [ 51.730] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
- [ 51.730] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
- [ 51.730] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
- [ 51.730] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.034
- [ 51.730] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
- [ 51.730] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
- [ 51.730] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
- [ 51.730] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
- [ 51.730] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
- [ 51.731] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
- [ 51.731] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
- [ 51.732] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
- [ 51.732] (II) No input driver specified, ignoring this device.
- [ 51.732] (II) This device may have been added with another device file.
- [ 51.732] (II) config/udev: Adding input device Serial Wacom Tablet WACf00e (/dev/ttyS0)
- [ 51.732] (**) Serial Wacom Tablet WACf00e: Applying InputClass "Wacom serial class"
- [ 51.732] (**) Serial Wacom Tablet WACf00e: Applying InputClass "Wacom serial class identifiers"
- [ 51.732] (II) LoadModule: "wacom"
- [ 51.732] (II) Loading /usr/lib64/xorg/modules/input/wacom_drv.so
- [ 51.741] (II) Module wacom: vendor="X.Org Foundation"
- [ 51.741] compiled for 1.19.3, module version = 0.34.0
- [ 51.741] Module class: X.Org XInput Driver
- [ 51.741] ABI class: X.Org XInput driver, version 24.1
- [ 51.741] (II) wacom: Driver for Wacom graphics tablets: PenPartner, Graphire,
- Graphire2 4x5, Graphire2 5x7, Graphire3 4x5, Graphire3 6x8,
- Graphire4 4x5, Graphire4 6x8, BambooFun 4x5, BambooFun 6x8,
- Bamboo1 Medium, Graphire4 6x8 BlueTooth, CTL-460, CTH-461, CTL-660,
- CTL-461/S, Bamboo Touch, CTH-460/K, CTH-461/S, CTH-661/S1, CTH-461/L,
- CTH-661/L, Intuos 4x5, Intuos 6x8, Intuos 9x12, Intuos 12x12,
- Intuos 12x18, PTU600, PL400, PL500, PL600, PL600SX, PL550, PL800,
- PL700, PL510, PL710, DTI520, DTF720, DTF720a, DTF521, DTU1931,
- DTU2231, DTU1631, Intuos2 4x5, Intuos2 6x8, Intuos2 9x12,
- Intuos2 12x12, Intuos2 12x18, Intuos2 6x8 , Volito, PenStation,
- Volito2 4x5, Volito2 2x3, PenPartner2, Bamboo, Bamboo1, Bamboo1 4x6,
- Bamboo1 5x8, Intuos3 4x5, Intuos3 6x8, Intuos3 9x12, Intuos3 12x12,
- Intuos3 12x19, Intuos3 6x11, Intuos3 4x6, Intuos4 4x6, Intuos4 6x9,
- Intuos4 8x13, Intuos4 12x19, Intuos4 WL USB Endpoint,
- Intuos4 WL Bluetooth Endpoint, Intuos5 touch S, Intuos5 touch M,
- Intuos5 touch L, Intuos5 S, Intuos5 M, Intuos Pro S, Intuos Pro M,
- Intuos Pro L, Cintiq 21UX, Cintiq 20WSX, Cintiq 12WX, Cintiq 21UX2,
- Cintiq 24HD, Cintiq 22HD, Cintiq 24HD touch (EMR digitizer),
- Cintiq 13HD, DTK2241, DTH2242, Cintiq 22HDT, TabletPC 0x90,
- TabletPC 0x93, TabletPC 0x97, TabletPC 0x9A, CapPlus 0x9F,
- TabletPC 0xE2, TabletPC 0xE3, TabletPC 0xE5, TabletPC 0xE6,
- TabletPC 0xEC, TabletPC 0xED, TabletPC 0xEF, TabletPC 0x100,
- TabletPC 0x101, TabletPC 0x10D, TabletPC 0x116, TabletPC 0x12C,
- TabletPC 0x4001, TabletPC 0x4004, TabletPC 0x5000, TabletPC 0x5002,
- usb:172f:0024, usb:172f:0025, usb:172f:0026, usb:172f:0027,
- usb:172f:0028, usb:172f:0030, usb:172f:0031, usb:172f:0032,
- usb:172f:0033, usb:172f:0034, usb:172f:0035, usb:172f:0036,
- usb:172f:0037, usb:172f:0038, usb:172f:0039, usb:172f:0051,
- usb:172f:0052, usb:172f:0053, usb:172f:0054, usb:172f:0055,
- usb:172f:0056, usb:172f:0057, usb:172f:0058, usb:172f:0500,
- usb:172f:0501, usb:172f:0502, usb:172f:0503, usb:1b96:0001,
- usb:17ef:6004
- [ 51.742] (II) Using input driver 'wacom' for 'Serial Wacom Tablet WACf00e'
- [ 51.742] (**) Serial Wacom Tablet WACf00e: always reports core events
- [ 51.742] (**) Option "Device" "/dev/ttyS0"
- [ 51.743] (**) Option "StopBits" "1"
- [ 51.743] (**) Option "DataBits" "8"
- [ 51.743] (**) Option "Parity" "None"
- [ 51.743] (**) Option "Vmin" "1"
- [ 51.743] (**) Option "Vtime" "10"
- [ 51.743] (**) Option "FlowControl" "Xoff"
- [ 51.743] (II) Serial Wacom Tablet WACf00e: type not specified, assuming 'stylus'.
- [ 51.743] (II) Serial Wacom Tablet WACf00e: other types will be automatically added.
- [ 551.953] (II) Serial Wacom Tablet WACf00e stylus: serial tablet id 0xE3.
- [ 551.953] (--) Serial Wacom Tablet WACf00e stylus: using pressure threshold of 873 for button 1
- [ 551.953] (--) Serial Wacom Tablet WACf00e stylus: maxX=26312 maxY=16520 maxZ=255 resX=100000 resY=100000 tilt=disabled
- [ 551.954] (II) Serial Wacom Tablet WACf00e stylus: hotplugging dependent devices.
- [ 551.954] (EE) Serial Wacom Tablet WACf00e stylus: Invalid type 'cursor' for this device.
- [ 551.954] (EE) Serial Wacom Tablet WACf00e stylus: Invalid type 'pad' for this device.
- [ 551.954] (II) Serial Wacom Tablet WACf00e stylus: hotplugging completed.
- [ 551.954] (**) Option "config_info" "udev:/sys/devices/pnp0/00:04/tty/ttyS0"
- [ 551.954] (II) XINPUT: Adding extended input device "Serial Wacom Tablet WACf00e stylus" (type: STYLUS, id 12)
- [ 551.955] (**) Serial Wacom Tablet WACf00e stylus: (accel) keeping acceleration scheme 1
- [ 551.955] (**) Serial Wacom Tablet WACf00e stylus: (accel) acceleration profile 0
- [ 551.955] (**) Serial Wacom Tablet WACf00e stylus: (accel) acceleration factor: 2.000
- [ 551.955] (**) Serial Wacom Tablet WACf00e stylus: (accel) acceleration threshold: 4
- [ 551.955] (**) Option "BaudRate" "38400"
- [ 551.971] (**) Serial Wacom Tablet WACf00e eraser: Applying InputClass "Wacom serial class"
- [ 551.971] (**) Serial Wacom Tablet WACf00e eraser: Applying InputClass "Wacom serial class identifiers"
- [ 551.971] (II) Using input driver 'wacom' for 'Serial Wacom Tablet WACf00e eraser'
- [ 551.971] (**) Serial Wacom Tablet WACf00e eraser: always reports core events
- [ 551.971] (**) Option "Device" "/dev/ttyS0"
- [ 551.971] (**) Option "Type" "eraser"
- [ 551.971] (**) Option "BaudRate" "38400"
- [ 551.971] (**) Option "StopBits" "1"
- [ 551.971] (**) Option "DataBits" "8"
- [ 551.971] (**) Option "Parity" "None"
- [ 551.971] (**) Option "Vmin" "1"
- [ 551.971] (**) Option "Vtime" "10"
- [ 551.971] (**) Option "FlowControl" "Xoff"
- [ 551.971] (--) Serial Wacom Tablet WACf00e eraser: maxX=26312 maxY=16520 maxZ=255 resX=100000 resY=100000 tilt=disabled
- [ 551.971] (**) Option "config_info" "udev:/sys/devices/pnp0/00:04/tty/ttyS0"
- [ 551.971] (II) XINPUT: Adding extended input device "Serial Wacom Tablet WACf00e eraser" (type: ERASER, id 13)
- [ 551.972] (**) Serial Wacom Tablet WACf00e eraser: (accel) keeping acceleration scheme 1
- [ 551.972] (**) Serial Wacom Tablet WACf00e eraser: (accel) acceleration profile 0
- [ 551.972] (**) Serial Wacom Tablet WACf00e eraser: (accel) acceleration factor: 2.000
- [ 551.972] (**) Serial Wacom Tablet WACf00e eraser: (accel) acceleration threshold: 4
- [ 551.973] (**) Serial Wacom Tablet WACf00e touch: Applying InputClass "Wacom serial class"
- [ 551.973] (**) Serial Wacom Tablet WACf00e touch: Applying InputClass "Wacom serial class identifiers"
- [ 551.973] (II) Using input driver 'wacom' for 'Serial Wacom Tablet WACf00e touch'
- [ 551.973] (**) Serial Wacom Tablet WACf00e touch: always reports core events
- [ 551.973] (**) Option "Device" "/dev/ttyS0"
- [ 551.973] (**) Option "Type" "touch"
- [ 551.973] (**) Option "BaudRate" "38400"
- [ 551.973] (**) Option "StopBits" "1"
- [ 551.973] (**) Option "DataBits" "8"
- [ 551.973] (**) Option "Parity" "None"
- [ 551.973] (**) Option "Vmin" "1"
- [ 551.973] (**) Option "Vtime" "10"
- [ 551.973] (**) Option "FlowControl" "Xoff"
- [ 551.973] (--) Serial Wacom Tablet WACf00e touch: maxX=2640 maxY=1630 maxZ=255 resX=10000 resY=10000
- [ 551.973] (**) Option "config_info" "udev:/sys/devices/pnp0/00:04/tty/ttyS0"
- [ 551.973] (II) XINPUT: Adding extended input device "Serial Wacom Tablet WACf00e touch" (type: TOUCH, id 14)
- [ 551.974] (**) Serial Wacom Tablet WACf00e touch: (accel) keeping acceleration scheme 1
- [ 551.974] (**) Serial Wacom Tablet WACf00e touch: (accel) acceleration profile 0
- [ 551.974] (**) Serial Wacom Tablet WACf00e touch: (accel) acceleration factor: 2.000
- [ 551.974] (**) Serial Wacom Tablet WACf00e touch: (accel) acceleration threshold: 4
- [ 551.975] (II) intel(0): EDID vendor "SEC", prod id 22337
- [ 551.975] (II) intel(0): Printing DDC gathered Modelines:
- [ 551.975] (II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1296 1344 1353 800 801 804 854 -hsync -vsync (51.2 kHz eP)
- [ 551.975] (II) intel(0): Modeline "1280x800"x0.0 46.20 1280 1296 1344 1353 800 801 804 854 -hsync -vsync (34.1 kHz e)
-
- $ cat dmesg
- [ 0.000000] BIOS-e820: [mem 0x00000000bc305000-0x00000000bcc34fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000bcc35000-0x00000000bceb4fff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x00000000bceb5000-0x00000000bcffefff] ACPI data
- [ 0.000000] BIOS-e820: [mem 0x00000000bcfff000-0x00000000bcffffff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000ffe90000-0x00000000ffe96fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013dffffff] usable
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] e820: update [mem 0xb6ce0018-0xb6cf0057] usable ==> usable
- [ 0.000000] e820: update [mem 0xb6cd7018-0xb6cdf657] usable ==> usable
- [ 0.000000] extended physical RAM map:
- [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000008efff] usable
- [ 0.000000] reserve setup_data: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
- [ 0.000000] reserve setup_data: [mem 0x0000000000090000-0x000000000009ffff] usable
- [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000b6cd7017] usable
- [ 0.000000] reserve setup_data: [mem 0x00000000b6cd7018-0x00000000b6cdf657] usable
- [ 0.000000] reserve setup_data: [mem 0x00000000b6cdf658-0x00000000b6ce0017] usable
- [ 0.000000] reserve setup_data: [mem 0x00000000b6ce0018-0x00000000b6cf0057] usable
- [ 0.000000] reserve setup_data: [mem 0x00000000b6cf0058-0x00000000b99f3fff] usable
- [ 0.000000] reserve setup_data: [mem 0x00000000b99f4000-0x00000000b9d25fff] reserved
- [ 0.000000] reserve setup_data: [mem 0x00000000b9d26000-0x00000000bc304fff] usable
- [ 0.000000] reserve setup_data: [mem 0x00000000bc305000-0x00000000bcc34fff] reserved
- [ 0.000000] reserve setup_data: [mem 0x00000000bcc35000-0x00000000bceb4fff] ACPI NVS
- [ 0.000000] reserve setup_data: [mem 0x00000000bceb5000-0x00000000bcffefff] ACPI data
- [ 0.000000] reserve setup_data: [mem 0x00000000bcfff000-0x00000000bcffffff] usable
- [ 0.000000] reserve setup_data: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
- [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
- [ 0.000000] reserve setup_data: [mem 0x00000000ffe90000-0x00000000ffe96fff] reserved
- [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000013dffffff] usable
- [ 0.000000] efi: EFI v2.00 by HPQ
- [ 0.000000] efi: ACPI=0xbcffe000 ACPI 2.0=0xbcffe014 SMBIOS=0xbc3e5698
- [ 0.000000] SMBIOS 2.6 present.
- [ 0.000000] DMI: Hewlett-Packard HP EliteBook 2760p/162A, BIOS 68SOU Ver. F.22 01/05/2012
- [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
- [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.000000] e820: last_pfn = 0x13e000 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
- [ 0.000000] 1 base 000000000 mask F80000000 write-back
- [ 0.000000] 2 base 080000000 mask FC0000000 write-back
- [ 0.000000] 3 base 0BE000000 mask FFE000000 uncachable
- [ 0.000000] 4 base 0BD800000 mask FFF800000 uncachable
- [ 0.000000] 5 base 100000000 mask FC0000000 write-back
- [ 0.000000] 6 base 13E000000 mask FFE000000 uncachable
- [ 0.000000] 7 disabled
- [ 0.000000] 8 disabled
- [ 0.000000] 9 disabled
- [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
- [ 0.000000] e820: last_pfn = 0xbd000 max_arch_pfn = 0x400000000
- [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
- [ 0.000000] reserving inaccessible SNB gfx pages
- [ 0.000000] BRK [0x08b23000, 0x08b23fff] PGTABLE
- [ 0.000000] BRK [0x08b24000, 0x08b24fff] PGTABLE
- [ 0.000000] BRK [0x08b25000, 0x08b25fff] PGTABLE
- [ 0.000000] BRK [0x08b26000, 0x08b26fff] PGTABLE
- [ 0.000000] BRK [0x08b27000, 0x08b27fff] PGTABLE
- [ 0.000000] BRK [0x08b28000, 0x08b28fff] PGTABLE
- [ 0.000000] ACPI: Early table checksum verification disabled
- [ 0.000000] ACPI: RSDP 0x00000000BCFFE014 000024 (v02 HPQOEM)
- [ 0.000000] ACPI: XSDT 0x00000000BCFFE120 00007C (v01 HPQOEM SLIC-MPC 0000000F 01000013)
- [ 0.000000] ACPI: FACP 0x00000000BCFFC000 0000F4 (v03 HPQOEM 162A 0000000F HP 00000001)
- [ 0.000000] ACPI: DSDT 0x00000000BCFD1000 025541 (v02 HPQOEM 162A 00000001 INTL 20060912)
- [ 0.000000] ACPI: FACS 0x00000000BCE7E000 000040
- [ 0.000000] ACPI: FACS 0x00000000BCE7E000 000040
- [ 0.000000] ACPI: HPET 0x00000000BCFFB000 000038 (v01 HPQOEM 162A 00000001 HP 00000001)
- [ 0.000000] ACPI: APIC 0x00000000BCFFA000 0000BC (v01 HPQOEM 162A 00000001 HP 00000001)
- [ 0.000000] ACPI: MCFG 0x00000000BCFF9000 00003C (v01 HPQOEM 162A 00000001 HP 00000001)
- [ 0.000000] ACPI: TCPA 0x00000000BCFF7000 000032 (v02 HPQOEM 162A 00000000 HP 00000001)
- [ 0.000000] ACPI: SSDT 0x00000000BCFCE000 000266 (v01 HPQOEM SataAhci 00001000 INTL 20060912)
- [ 0.000000] ACPI: SSDT 0x00000000BCFCD000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20060912)
- [ 0.000000] ACPI: SLIC 0x00000000BCFCC000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
- [ 0.000000] ACPI: SSDT 0x00000000BCFCB000 000810 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
- [ 0.000000] ACPI: SSDT 0x00000000BCFCA000 0009B1 (v01 PmRef CpuPm 00003000 INTL 20060912)
- [ 0.000000] ACPI: ASF! 0x00000000BCFF8000 0000A5 (v32 HPQOEM 162A 00000001 HP 00000001)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
- [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
- [ 0.000000] Normal [mem 0x0000000100000000-0x000000013dffffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000008efff]
- [ 0.000000] node 0: [mem 0x0000000000090000-0x000000000009ffff]
- [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000b99f3fff]
- [ 0.000000] node 0: [mem 0x00000000b9d26000-0x00000000bc304fff]
- [ 0.000000] node 0: [mem 0x00000000bcfff000-0x00000000bcffffff]
- [ 0.000000] node 0: [mem 0x0000000100000000-0x000000013dffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013dffffff]
- [ 0.000000] On node 0 totalpages: 1023858
- [ 0.000000] DMA zone: 56 pages used for memmap
- [ 0.000000] DMA zone: 1182 pages reserved
- [ 0.000000] DMA zone: 3998 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 10472 pages used for memmap
- [ 0.000000] DMA32 zone: 765908 pages, LIFO batch:31
- [ 0.000000] Normal zone: 3472 pages used for memmap
- [ 0.000000] Normal zone: 253952 pages, LIFO batch:31
- [ 0.000000] Reserving Intel graphics memory at 0x00000000bda00000-0x00000000bf9fffff
- [ 0.000000] ACPI: PM-Timer IO Port: 0x408
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
- [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
- [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
- [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xb6cd7000-0xb6cd7fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xb6cdf000-0xb6cdffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xb6ce0000-0xb6ce0fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xb6cf0000-0xb6cf0fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xb99f4000-0xb9d25fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xbc305000-0xbcc34fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xbcc35000-0xbceb4fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xbceb5000-0xbcffefff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xbd000000-0xbd9fffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xbda00000-0xbf9fffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xbfa00000-0xe00f7fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffe8ffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xffe90000-0xffe96fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xffe97000-0xffffffff]
- [ 0.000000] e820: [mem 0xbfa00000-0xe00f7fff] available for PCI devices
- [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:8 nr_node_ids:1
- [ 0.000000] percpu: Embedded 33 pages/cpu @ffff88013dc00000 s95064 r8192 d31912 u262144
- [ 0.000000] pcpu-alloc: s95064 r8192 d31912 u262144 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1008676
- [ 0.000000] Kernel command line: root=/dev/ram0 crypt_root=/dev/disk/by-uuid/4b24b732-067b-4e79-9621-4b634495d9a8 dolvm real_root=/dev/mapper/vg1-root rootfstype=ext4 real_init=/sbin/init root_keydev=/dev/disk/by-partuuid/8f4232f1-dda0-480a-96b1-1345a3e9ecc0 root_key=luks-key.gpg real_resume=/dev/mapper/vg1-swap keymap=de
- [ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes
- [ 0.000000] log_buf_len total cpu_extra contributions: 28672 bytes
- [ 0.000000] log_buf_len min size: 32768 bytes
- [ 0.000000] log_buf_len: 65536 bytes
- [ 0.000000] early log buf free: 20544(62%)
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
- [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.000000] Memory: 3722932K/4095432K available (4388K kernel code, 422K rwdata, 1500K rodata, 117100K init, 340K bss, 372500K reserved, 0K cma-reserved)
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] Build-time adjustment of leaf fanout to 64.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=8.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
- [ 0.000000] NR_IRQS:4352 nr_irqs:488 16
- [ 0.000000] Console: colour dummy device 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
- [ 0.000000] hpet clockevent registered
- [ 0.000000] tsc: Fast TSC calibration using PIT
- [ 0.000000] tsc: Detected 2494.404 MHz processor
- [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.80 BogoMIPS (lpj=24944040)
- [ 0.000010] pid_max: default: 32768 minimum: 301
- [ 0.000018] ACPI: Core revision 20160831
- [ 0.010465] ACPI: 5 ACPI AML tables successfully acquired and loaded
- [ 0.013453] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.013458] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.013663] CPU: Physical Processor ID: 0
- [ 0.013666] CPU: Processor Core ID: 0
- [ 0.013672] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
- [ 0.013675] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
- [ 0.013680] mce: CPU supports 7 MCE banks
- [ 0.013689] CPU0: Thermal monitoring enabled (TM1)
- [ 0.013700] process: using mwait in idle threads
- [ 0.013706] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
- [ 0.013709] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
- [ 0.014098] Freeing SMP alternatives memory: 24K (ffffffff88ac6000 - ffffffff88acc000)
- [ 0.031307] smpboot: Max logical packages: 4
- [ 0.031730] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.131745] TSC deadline timer enabled
- [ 0.131748] smpboot: CPU0: Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz (family: 0x6, model: 0x2a, stepping: 0x7)
- [ 0.131757] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
- [ 0.131782] core: PEBS disabled due to CPU errata, please upgrade microcode
- [ 0.131786] ... version: 3
- [ 0.131789] ... bit width: 48
- [ 0.131792] ... generic registers: 4
- [ 0.131795] ... value mask: 0000ffffffffffff
- [ 0.131798] ... max period: 00007fffffffffff
- [ 0.131801] ... fixed-purpose events: 3
- [ 0.131804] ... event mask: 000000070000000f
- [ 0.132098] x86: Booting SMP configuration:
- [ 0.132101] .... node #0, CPUs: #1 #2 #3
- [ 0.583856] x86: Booted up 1 node, 4 CPUs
- [ 0.583863] smpboot: Total of 4 processors activated (19956.72 BogoMIPS)
- [ 0.586546] devtmpfs: initialized
- [ 0.586831] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
- [ 0.586836] PM: Registering ACPI NVS region [mem 0xbcc35000-0xbceb4fff] (2621440 bytes)
- [ 0.586951] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 0.586959] futex hash table entries: 2048 (order: 5, 131072 bytes)
- [ 0.587094] NET: Registered protocol family 16
- [ 0.621839] cpuidle: using governor ladder
- [ 0.661852] cpuidle: using governor menu
- [ 0.662021] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
- [ 0.662025] ACPI: bus type PCI registered
- [ 0.662100] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.662106] PCI: not using MMCONFIG
- [ 0.662110] PCI: Using configuration type 1 for base access
- [ 0.662191] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
- [ 0.692162] ACPI: Added _OSI(Module Device)
- [ 0.692166] ACPI: Added _OSI(Processor Device)
- [ 0.692169] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.692172] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.692357] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.699806] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
- [ 0.725450] ACPI: Dynamic OEM Table Load:
- [ 0.725462] ACPI: SSDT 0xFFFF88013D35B800 00074D (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
- [ 0.725790] ACPI: Dynamic OEM Table Load:
- [ 0.725801] ACPI: SSDT 0xFFFF88013D339400 000303 (v01 PmRef ApIst 00003000 INTL 20060912)
- [ 0.726050] ACPI: Dynamic OEM Table Load:
- [ 0.726059] ACPI: SSDT 0xFFFF88013D3A2E00 000119 (v01 PmRef ApCst 00003000 INTL 20060912)
- [ 0.726872] ACPI : EC: EC started
- [ 6.183896] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
- [ 6.183900] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
- [ 6.183905] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
- [ 6.183908] ACPI: Interpreter enabled
- [ 6.183930] ACPI: (supports S0 S3 S4 S5)
- [ 6.183933] ACPI: Using IOAPIC for interrupt routing
- [ 6.183960] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 6.184272] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
- [ 6.184291] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 6.186099] ACPI: Power Resource [APPR] (off)
- [ 6.187915] ACPI: Power Resource [COMP] (on)
- [ 6.188117] ACPI: Power Resource [LPP] (on)
- [ 6.191907] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
- [ 6.191914] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
- [ 6.193585] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
- [ 6.193590] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
- [ 6.193911] PCI host bridge to bus 0000:00
- [ 6.193915] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
- [ 6.193920] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
- [ 6.193924] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
- [ 6.193928] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xdfffffff window]
- [ 6.193932] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff window]
- [ 6.193936] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff window]
- [ 6.193940] pci_bus 0000:00: root bus resource [bus 00-3e]
- [ 6.193950] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
- [ 6.194053] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
- [ 6.194062] pci 0000:00:02.0: reg 0x10: [mem 0xd4000000-0xd43fffff 64bit]
- [ 6.194067] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
- [ 6.194071] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
- [ 6.194189] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
- [ 6.194209] pci 0000:00:16.0: reg 0x10: [mem 0xd4724000-0xd472400f 64bit]
- [ 6.194292] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
- [ 6.194385] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
- [ 6.194401] pci 0000:00:19.0: reg 0x10: [mem 0xd4700000-0xd471ffff]
- [ 6.194409] pci 0000:00:19.0: reg 0x14: [mem 0xd472a000-0xd472afff]
- [ 6.194417] pci 0000:00:19.0: reg 0x18: [io 0x4060-0x407f]
- [ 6.194484] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
- [ 6.194530] pci 0000:00:19.0: System wakeup disabled by ACPI
- [ 6.194580] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
- [ 6.194595] pci 0000:00:1a.0: reg 0x10: [mem 0xd4729000-0xd47293ff]
- [ 6.194673] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
- [ 6.194721] pci 0000:00:1a.0: System wakeup disabled by ACPI
- [ 6.194770] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
- [ 6.194785] pci 0000:00:1b.0: reg 0x10: [mem 0xd4720000-0xd4723fff 64bit]
- [ 6.194854] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 6.194943] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
- [ 6.195024] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 6.195116] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
- [ 6.195194] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
- [ 6.195249] pci 0000:00:1c.1: System wakeup disabled by ACPI
- [ 6.195299] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
- [ 6.195385] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
- [ 6.195434] pci 0000:00:1c.2: System wakeup disabled by ACPI
- [ 6.195483] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
- [ 6.195568] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
- [ 6.195616] pci 0000:00:1c.3: System wakeup disabled by ACPI
- [ 6.195669] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
- [ 6.195685] pci 0000:00:1d.0: reg 0x10: [mem 0xd4728000-0xd47283ff]
- [ 6.195763] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
- [ 6.195809] pci 0000:00:1d.0: System wakeup disabled by ACPI
- [ 6.195858] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
- [ 6.196045] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
- [ 6.196060] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
- [ 6.196068] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097]
- [ 6.196075] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
- [ 6.196083] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093]
- [ 6.196091] pci 0000:00:1f.2: reg 0x20: [io 0x4040-0x405f]
- [ 6.196098] pci 0000:00:1f.2: reg 0x24: [mem 0xd4727000-0xd47277ff]
- [ 6.196146] pci 0000:00:1f.2: PME# supported from D3hot
- [ 6.196272] pci 0000:00:1c.0: PCI bridge to [bus 01]
- [ 6.196281] pci 0000:00:1c.0: bridge window [mem 0xd4600000-0xd46fffff]
- [ 6.196331] pci 0000:00:1c.1: PCI bridge to [bus 02-22]
- [ 6.196338] pci 0000:00:1c.1: bridge window [io 0x2000-0x3fff]
- [ 6.196341] pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd3ffffff]
- [ 6.196419] pci 0000:23:00.0: [197b:2380] type 00 class 0x0c0010
- [ 6.196454] pci 0000:23:00.0: reg 0x10: [mem 0xd4500000-0xd45007ff]
- [ 6.196477] pci 0000:23:00.0: reg 0x14: [mem 0xd4505000-0xd45050ff]
- [ 6.196781] pci 0000:23:00.1: [197b:2392] type 00 class 0x088000
- [ 6.196806] pci 0000:23:00.1: reg 0x10: [mem 0xd4504000-0xd45040ff]
- [ 6.196883] pci 0000:23:00.1: reg 0x30: [mem 0xffff8000-0xffffffff pref]
- [ 6.197070] pci 0000:23:00.2: [197b:2391] type 00 class 0x080501
- [ 6.197100] pci 0000:23:00.2: reg 0x10: [mem 0xd4503000-0xd45030ff]
- [ 6.225304] pci 0000:00:1c.2: PCI bridge to [bus 23]
- [ 6.225326] pci 0000:00:1c.2: bridge window [mem 0xd4500000-0xd45fffff]
- [ 6.225453] pci 0000:24:00.0: [14e4:4727] type 00 class 0x028000
- [ 6.225480] pci 0000:24:00.0: reg 0x10: [mem 0xd4400000-0xd4403fff 64bit]
- [ 6.225637] pci 0000:24:00.0: supports D1 D2
- [ 6.225673] pci 0000:24:00.0: System wakeup disabled by ACPI
- [ 6.255314] pci 0000:00:1c.3: PCI bridge to [bus 24]
- [ 6.255335] pci 0000:00:1c.3: bridge window [mem 0xd4400000-0xd44fffff]
- [ 6.255388] pci_bus 0000:00: on NUMA node 0
- [ 6.256272] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
- [ 6.256328] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
- [ 6.256382] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
- [ 6.256435] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
- [ 6.256489] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
- [ 6.256542] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
- [ 6.256595] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
- [ 6.256647] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
- [ 6.257033] ACPI: Enabled 5 GPEs in block 00 to 3F
- [ 6.257094] ACPI : EC: event unblocked
- [ 6.257104] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
- [ 6.257109] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
- [ 6.257214] vgaarb: setting as boot device: PCI:0000:00:02.0
- [ 6.257219] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
- [ 6.257224] vgaarb: loaded
- [ 6.257227] vgaarb: bridge control possible 0000:00:02.0
- [ 6.257294] SCSI subsystem initialized
- [ 6.257367] Registered efivars operations
- [ 6.365131] PCI: Using ACPI for IRQ routing
- [ 6.371767] PCI: pci_cache_line_size set to 64 bytes
- [ 6.371853] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
- [ 6.371854] e820: reserve RAM buffer [mem 0xb6cd7018-0xb7ffffff]
- [ 6.371855] e820: reserve RAM buffer [mem 0xb6ce0018-0xb7ffffff]
- [ 6.371856] e820: reserve RAM buffer [mem 0xb99f4000-0xbbffffff]
- [ 6.371857] e820: reserve RAM buffer [mem 0xbc305000-0xbfffffff]
- [ 6.371858] e820: reserve RAM buffer [mem 0xbd000000-0xbfffffff]
- [ 6.371860] e820: reserve RAM buffer [mem 0x13e000000-0x13fffffff]
- [ 6.372049] clocksource: Switched to clocksource hpet
- [ 6.372084] VFS: Disk quotas dquot_6.6.0
- [ 6.372116] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 6.373885] pnp: PnP ACPI init
- [ 6.374027] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
- [ 6.374032] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
- [ 6.374036] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
- [ 6.374041] system 00:00: [mem 0x00000000-0x00000fff] could not be reserved
- [ 6.374045] system 00:00: [mem 0xbfa00000-0xbfa00fff] has been reserved
- [ 6.374049] system 00:00: [mem 0xe0000000-0xefffffff] could not be reserved
- [ 6.374054] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
- [ 6.374058] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
- [ 6.374062] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
- [ 6.374066] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
- [ 6.374072] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 6.374191] pnp 00:01: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
- [ 6.374260] system 00:02: [io 0x0200-0x027f] has been reserved
- [ 6.374264] system 00:02: [io 0x1000-0x100f] has been reserved
- [ 6.374268] system 00:02: [io 0xffff] has been reserved
- [ 6.374272] system 00:02: [io 0xffff] has been reserved
- [ 6.374276] system 00:02: [io 0x0400-0x047f] has been reserved
- [ 6.374280] system 00:02: [io 0x0500-0x057f] has been reserved
- [ 6.374284] system 00:02: [io 0xef80-0xef9f] has been reserved
- [ 6.374289] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 6.374316] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 6.374605] pnp 00:04: Plug and Play ACPI device, IDs WACf00e (active)
- [ 6.374633] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
- [ 6.374669] pnp 00:06: Plug and Play ACPI device, IDs SYN0180 SYN0100 SYN0002 PNP0f13 (active)
- [ 6.375082] pnp: PnP ACPI: found 7 devices
- [ 6.379623] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
- [ 6.379633] pci 0000:23:00.1: can't claim BAR 6 [mem 0xffff8000-0xffffffff pref]: no compatible bridge window
- [ 6.379659] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-22] add_size 200000 add_align 100000
- [ 6.379677] pci 0000:00:1c.1: res[9]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
- [ 6.379679] pci 0000:00:1c.1: res[9]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
- [ 6.379686] pci 0000:00:1c.1: BAR 9: assigned [mem 0xbfb00000-0xbfcfffff 64bit pref]
- [ 6.379691] pci 0000:00:1c.0: PCI bridge to [bus 01]
- [ 6.379699] pci 0000:00:1c.0: bridge window [mem 0xd4600000-0xd46fffff]
- [ 6.379710] pci 0000:00:1c.1: PCI bridge to [bus 02-22]
- [ 6.379715] pci 0000:00:1c.1: bridge window [io 0x2000-0x3fff]
- [ 6.379723] pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd3ffffff]
- [ 6.379729] pci 0000:00:1c.1: bridge window [mem 0xbfb00000-0xbfcfffff 64bit pref]
- [ 6.379740] pci 0000:23:00.1: BAR 6: assigned [mem 0xd4508000-0xd450ffff pref]
- [ 6.379744] pci 0000:00:1c.2: PCI bridge to [bus 23]
- [ 6.379751] pci 0000:00:1c.2: bridge window [mem 0xd4500000-0xd45fffff]
- [ 6.379762] pci 0000:00:1c.3: PCI bridge to [bus 24]
- [ 6.379769] pci 0000:00:1c.3: bridge window [mem 0xd4400000-0xd44fffff]
- [ 6.379781] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
- [ 6.379782] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
- [ 6.379783] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
- [ 6.379785] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xdfffffff window]
- [ 6.379786] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff window]
- [ 6.379787] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff window]
- [ 6.379788] pci_bus 0000:01: resource 1 [mem 0xd4600000-0xd46fffff]
- [ 6.379790] pci_bus 0000:02: resource 0 [io 0x2000-0x3fff]
- [ 6.379791] pci_bus 0000:02: resource 1 [mem 0xd0000000-0xd3ffffff]
- [ 6.379792] pci_bus 0000:02: resource 2 [mem 0xbfb00000-0xbfcfffff 64bit pref]
- [ 6.379793] pci_bus 0000:23: resource 1 [mem 0xd4500000-0xd45fffff]
- [ 6.379795] pci_bus 0000:24: resource 1 [mem 0xd4400000-0xd44fffff]
- [ 6.379895] NET: Registered protocol family 2
- [ 6.380057] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
- [ 6.380111] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
- [ 6.380205] TCP: Hash tables configured (established 32768 bind 32768)
- [ 6.380227] UDP hash table entries: 2048 (order: 4, 65536 bytes)
- [ 6.380243] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
- [ 6.380306] NET: Registered protocol family 1
- [ 6.380323] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
- [ 6.380338] pci 0000:00:1a.0: enabling device (0000 -> 0002)
- [ 6.380651] pci 0000:00:1d.0: enabling device (0000 -> 0002)
- [ 6.380957] PCI: CLS 64 bytes, default 64
- [ 7.954104] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- [ 7.954112] software IO TLB [mem 0xb0f01000-0xb4f01000] (64MB) mapped at [ffff8800b0f01000-ffff8800b4f00fff]
- [ 7.954237] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
- [ 7.954242] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
- [ 7.954245] RAPL PMU: hw unit of domain package 2^-16 Joules
- [ 7.954248] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
- [ 7.954698] audit: initializing netlink subsys (disabled)
- [ 7.954714] audit: type=2000 audit(1499193222.940:1): initialized
- [ 7.955018] workingset: timestamp_bits=62 max_order=20 bucket_order=0
- [ 7.955223] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 7.955507] gfs2: GFS2 installed
- [ 7.955984] NET: Registered protocol family 38
- [ 7.956004] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 7.956009] io scheduler noop registered
- [ 7.956012] io scheduler deadline registered
- [ 7.956022] io scheduler cfq registered (default)
- [ 7.956078] pcieport 0000:00:1c.0: enabling device (0000 -> 0002)
- [ 7.956354] pcieport 0000:00:1c.1: enabling device (0000 -> 0003)
- [ 7.957043] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
- [ 7.957050] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
- [ 7.957070] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
- [ 7.957076] pcie_pme 0000:00:1c.1:pcie001: service driver pcie_pme loaded
- [ 7.957094] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
- [ 7.957098] pci 0000:23:00.0: Signaling PME through PCIe PME interrupt
- [ 7.957102] pci 0000:23:00.1: Signaling PME through PCIe PME interrupt
- [ 7.957106] pci 0000:23:00.2: Signaling PME through PCIe PME interrupt
- [ 7.957112] pcie_pme 0000:00:1c.2:pcie001: service driver pcie_pme loaded
- [ 7.957130] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
- [ 7.957134] pci 0000:24:00.0: Signaling PME through PCIe PME interrupt
- [ 7.957140] pcie_pme 0000:00:1c.3:pcie001: service driver pcie_pme loaded
- [ 7.957183] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 7.977988] 00:04: ttyS0 at I/O 0x280 (irq = 6, base_baud = 115200) is a 16550A
- [ 7.978336] Linux agpgart interface v0.103
- [ 7.978371] efifb: probing for efifb
- [ 7.978386] efifb: framebuffer at 0xc0000000, using 3072k, total 3072k
- [ 7.978390] efifb: mode is 1024x768x32, linelength=4096, pages=1
- [ 7.978393] efifb: scrolling: redraw
- [ 7.978396] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
- [ 7.980847] Console: switching to colour frame buffer device 128x48
- [ 7.983336] fb0: EFI VGA frame buffer device
- [ 7.985606] brd: module loaded
- [ 7.986795] loop: module loaded
- [ 7.986870] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
- [ 7.988808] i8042: Detected active multiplexing controller, rev 1.1
- [ 7.989541] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 7.989564] serio: i8042 AUX0 port at 0x60,0x64 irq 12
- [ 7.989585] serio: i8042 AUX1 port at 0x60,0x64 irq 12
- [ 7.989606] serio: i8042 AUX2 port at 0x60,0x64 irq 12
- [ 7.989627] serio: i8042 AUX3 port at 0x60,0x64 irq 12
- [ 7.989752] mousedev: PS/2 mouse device common for all mice
- [ 7.989878] rtc_cmos 00:03: RTC can wake from S4
- [ 7.990043] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
- [ 7.990093] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
- [ 7.990143] device-mapper: uevent: version 1.0.3
- [ 7.990200] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
- [ 7.990236] EFI Variables Facility v0.08 2004-May-17
- [ 8.098735] hidraw: raw HID events driver (C) Jiri Kosina
- [ 8.098852] NET: Registered protocol family 10
- [ 8.099053] NET: Registered protocol family 17
- [ 8.099297] microcode: sig=0x206a7, pf=0x10, revision=0x1a
- [ 8.099379] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
- [ 8.099513] registered taskstats version 1
- [ 8.100695] rtc_cmos 00:03: setting system clock to 2017-07-04 18:33:43 UTC (1499193223)
- [ 8.118319] Freeing unused kernel memory: 117100K (ffffffff8186b000 - ffffffff88ac6000)
- [ 8.119177] Write protecting the kernel read-only data: 8192k
- [ 8.120589] Freeing unused kernel memory: 1736K (ffff88000144e000 - ffff880001600000)
- [ 8.122836] Freeing unused kernel memory: 548K (ffff880001777000 - ffff880001800000)
- [ 8.221913] udevd[524]: starting version 3.1.5
- [ 8.223029] random: udevd: uninitialized urandom read (16 bytes read)
- [ 8.223946] random: udevd: uninitialized urandom read (16 bytes read)
- [ 8.224847] random: udevd: uninitialized urandom read (16 bytes read)
- [ 8.231430] random: udevd: uninitialized urandom read (16 bytes read)
- [ 8.234972] random: udevd: uninitialized urandom read (16 bytes read)
- [ 8.235696] Monitor-Mwait will be used to enter C-1 state
- [ 8.235704] Monitor-Mwait will be used to enter C-2 state
- [ 8.237522] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6
- [ 8.238614] ACPI: Sleep Button [SLPB]
- [ 8.239546] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input7
- [ 8.240412] ACPI: Lid Switch [LID]
- [ 8.241493] random: udevd: uninitialized urandom read (16 bytes read)
- [ 8.241536] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
- [ 8.241591] ACPI: Power Button [PWRF]
- [ 8.245403] pps_core: LinuxPPS API ver. 1 registered
- [ 8.246631] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 8.247710] PTP clock support registered
- [ 8.249004] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
- [ 8.249833] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
- [ 8.250857] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
- [ 8.253982] [drm] Initialized
- [ 8.268604] ACPI: bus type USB registered
- [ 8.269493] usbcore: registered new interface driver usbfs
- [ 8.270780] bcma-pci-bridge 0000:24:00.0: enabling device (0000 -> 0002)
- [ 8.270883] bcma: bus0: Found chip with id 0x4313, rev 0x01 and package 0x08
- [ 8.270915] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
- [ 8.270949] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
- [ 8.271001] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
- [ 8.278463] usbcore: registered new interface driver hub
- [ 8.280038] usbcore: registered new device driver usb
- [ 8.281846] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 8.282846] bcma: bus0: Bus registered
- [ 8.282922] ehci-pci: EHCI PCI platform driver
- [ 8.289635] libata version 3.00 loaded.
- [ 8.319683] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
- [ 8.321089] ACPI: Battery Slot [BAT0] (battery present)
- [ 8.322410] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
- [ 8.323356] ACPI: Battery Slot [BAT1] (battery absent)
- [ 8.324729] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
- [ 8.324735] thermal LNXTHERM:00: registered as thermal_zone0
- [ 8.324736] ACPI: Thermal Zone [CPUZ] (47 C)
- [ 8.327688] ACPI: AC Adapter [AC] (on-line)
- [ 8.334624] input: PC Speaker as /devices/platform/pcspkr/input/input9
- [ 8.346593] kvm: disabled by bios
- [ 8.349449] thermal LNXTHERM:01: registered as thermal_zone1
- [ 8.350817] ACPI: Thermal Zone [GFXZ] (0 C)
- [ 8.361249] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
- [ 8.367490] thermal LNXTHERM:02: registered as thermal_zone2
- [ 8.368582] ACPI: Thermal Zone [EXTZ] (41 C)
- [ 8.384418] thermal LNXTHERM:03: registered as thermal_zone3
- [ 8.385512] ACPI: Thermal Zone [LOCZ] (38 C)
- [ 8.402319] thermal LNXTHERM:04: registered as thermal_zone4
- [ 8.403256] ACPI: Thermal Zone [BATZ] (31 C)
- [ 8.404420] thermal LNXTHERM:05: registered as thermal_zone5
- [ 8.405383] ACPI: Thermal Zone [PCHZ] (0 C)
- [ 8.442948] kvm: disabled by bios
- [ 8.485007] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 2c:27:d7:82:2d:2c
- [ 8.486131] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
- [ 8.487311] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
- [ 8.488937] [drm] Memory usable by graphics device = 2048M
- [ 8.489910] checking generic (c0000000 300000) vs hw (c0000000 10000000)
- [ 8.489910] fb: switching to inteldrmfb from EFI VGA
- [ 8.490818] Console: switching to colour dummy device 80x25
- [ 8.490925] [drm] Replacing VGA console driver
- [ 8.496244] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 8.496258] [drm] Driver supports precise vblank timestamp query.
- [ 8.498596] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
- [ 8.517387] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
- [ 8.520136] acpi device:0b: registered as cooling_device4
- [ 8.520249] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input10
- [ 8.520329] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
- [ 8.520362] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
- [ 8.520729] ehci-pci 0000:00:1a.0: EHCI Host Controller
- [ 8.520740] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
- [ 8.520753] ehci-pci 0000:00:1a.0: debug port 2
- [ 8.524661] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
- [ 8.524671] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd4729000
- [ 8.526512] random: fast init done
- [ 8.529190] fbcon: inteldrmfb (fb0) is primary device
- [ 8.544097] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD81B1X5: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line
- [ 8.544099] snd_hda_codec_idt hdaudioC0D0: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
- [ 8.544101] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
- [ 8.544102] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0
- [ 8.544103] snd_hda_codec_idt hdaudioC0D0: inputs:
- [ 8.544105] snd_hda_codec_idt hdaudioC0D0: Internal Mic=0xe
- [ 8.544107] snd_hda_codec_idt hdaudioC0D0: Mic=0xc
- [ 8.544108] snd_hda_codec_idt hdaudioC0D0: Line=0xf
- [ 8.552005] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
- [ 8.552067] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 8.552069] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 8.552070] usb usb1: Product: EHCI Host Controller
- [ 8.552070] usb usb1: Manufacturer: Linux 4.9.16-gentoo ehci_hcd
- [ 8.552071] usb usb1: SerialNumber: 0000:00:1a.0
- [ 8.552222] hub 1-0:1.0: USB hub found
- [ 8.552231] hub 1-0:1.0: 3 ports detected
- [ 8.552498] Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1
- [ 8.552500] b43: probe of bcma0:1 failed with error -524
- [ 8.552531] Broadcom 43xx driver loaded [ Features: PNLS ]
- [ 8.552599] ehci-pci 0000:00:1d.0: EHCI Host Controller
- [ 8.552608] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
- [ 8.552622] ehci-pci 0000:00:1d.0: debug port 2
- [ 8.553624] brcmsmac bcma0:1: mfg 4bf core 812 rev 24 class 0 irq 19
- [ 8.556523] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
- [ 8.556531] ehci-pci 0000:00:1d.0: irq 16, io mem 0xd4728000
- [ 8.560811] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
- [ 8.582056] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
- [ 8.582204] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 8.582206] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 8.582207] usb usb2: Product: EHCI Host Controller
- [ 8.582209] usb usb2: Manufacturer: Linux 4.9.16-gentoo ehci_hcd
- [ 8.582210] usb usb2: SerialNumber: 0000:00:1d.0
- [ 8.582581] hub 2-0:1.0: USB hub found
- [ 8.582595] hub 2-0:1.0: 3 ports detected
- [ 8.582918] ahci 0000:00:1f.2: version 3.0
- [ 8.583167] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
- [ 8.593302] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x21 impl SATA mode
- [ 8.593309] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
- [ 8.622797] scsi host0: ahci
- [ 8.622955] scsi host1: ahci
- [ 8.623048] scsi host2: ahci
- [ 8.623141] scsi host3: ahci
- [ 8.623269] scsi host4: ahci
- [ 8.623374] scsi host5: ahci
- [ 8.623432] ata1: SATA max UDMA/133 abar m2048@0xd4727000 port 0xd4727100 irq 31
- [ 8.623432] ata2: DUMMY
- [ 8.623433] ata3: DUMMY
- [ 8.623433] ata4: DUMMY
- [ 8.623434] ata5: DUMMY
- [ 8.623444] ata6: SATA max UDMA/133 abar m2048@0xd4727000 port 0xd4727380 irq 31
- [ 8.636823] snd_hda_codec_generic hdaudioC0D3: autoconfig for Generic: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
- [ 8.636825] snd_hda_codec_generic hdaudioC0D3: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
- [ 8.636827] snd_hda_codec_generic hdaudioC0D3: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
- [ 8.636827] snd_hda_codec_generic hdaudioC0D3: mono: mono_out=0x0
- [ 8.636829] snd_hda_codec_generic hdaudioC0D3: dig-out=0x5/0x0
- [ 8.636829] snd_hda_codec_generic hdaudioC0D3: inputs:
- [ 8.638688] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
- [ 8.639037] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
- [ 8.639185] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
- [ 8.639347] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
- [ 8.639501] input: HDA Intel PCH HDMI as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
- [ 8.794112] psmouse serio4: synaptics: queried max coordinates: x [..5932], y [..5164]
- [ 8.869250] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000/0x0, board id: 0, fw id: 620079
- [ 8.915182] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5
- [ 8.922024] usb 1-1: new high-speed USB device number 2 using ehci-pci
- [ 8.943305] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input16
- [ 8.952043] usb 2-1: new high-speed USB device number 2 using ehci-pci
- [ 8.954247] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 8.967034] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
- [ 8.968905] ata1.00: ATA-9: INTEL SSDSC2BF180A4H, LH6i, max UDMA/133
- [ 8.968909] ata1.00: 351651888 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 8.972019] tsc: Refined TSC clocksource calibration: 2494.332 MHz
- [ 8.972034] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f44f92df3, max_idle_ns: 440795329494 ns
- [ 8.987086] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
- [ 8.995269] ata1.00: configured for UDMA/133
- [ 9.112879] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
- [ 9.112884] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 9.113159] hub 1-1:1.0: USB hub found
- [ 9.113202] hub 1-1:1.0: 6 ports detected
- [ 9.142522] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
- [ 9.142524] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 9.142863] hub 2-1:1.0: USB hub found
- [ 9.142970] hub 2-1:1.0: 8 ports detected
- [ 9.281479] Console: switching to colour frame buffer device 160x50
- [ 9.359703] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
- [ 9.392418] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2BF18 LH6i PQ: 0 ANSI: 5
- [ 9.432035] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
- [ 9.462041] usb 2-1.3: new high-speed USB device number 3 using ehci-pci
- [ 9.492258] sd 0:0:0:0: [sda] 351651888 512-byte logical blocks: (180 GB/168 GiB)
- [ 9.493383] sd 0:0:0:0: [sda] Write Protect is off
- [ 9.494364] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 9.494394] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 9.497153] sda: sda1 sda2 sda3 sda4
- [ 9.498757] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 9.584374] usb 1-1.1: New USB device found, idVendor=138a, idProduct=003c
- [ 9.585370] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=1
- [ 9.586334] usb 1-1.1: SerialNumber: 00b070659f8d
- [ 9.614761] usb 2-1.3: New USB device found, idVendor=090c, idProduct=1000
- [ 9.616048] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 9.617288] usb 2-1.3: Product: USB Flash Disk
- [ 9.618514] usb 2-1.3: Manufacturer: General
- [ 9.619714] usb 2-1.3: SerialNumber: 1313020000001572
- [ 9.622286] usb-storage 2-1.3:1.0: USB Mass Storage device detected
- [ 9.623572] scsi host6: usb-storage 2-1.3:1.0
- [ 9.624683] usbcore: registered new interface driver usb-storage
- [ 9.712024] usb 2-1.4: new high-speed USB device number 4 using ehci-pci
- [ 9.824360] ata6: SATA link down (SStatus 0 SControl 300)
- [ 9.911310] usb 2-1.4: New USB device found, idVendor=04f2, idProduct=b242
- [ 9.912695] usb 2-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=3
- [ 9.912697] usb 2-1.4: Product: HP HD Webcam [Fixed]
- [ 9.912698] usb 2-1.4: Manufacturer: Chicony Electronics Co., Ltd.
- [ 9.912699] usb 2-1.4: SerialNumber: SN0001
- [ 9.982337] clocksource: Switched to clocksource tsc
- [ 9.998264] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 10.011965] usb 2-1.6: new full-speed USB device number 5 using ehci-pci
- [ 10.074849] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input20
- [ 10.148326] scsi: <fdomain> Detection failed (no card)
- [ 10.166605] usb 2-1.6: New USB device found, idVendor=03f0, idProduct=231d
- [ 10.168043] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 10.169406] usb 2-1.6: Product: HP Integrated Module
- [ 10.170759] usb 2-1.6: Manufacturer: Broadcom Corp
- [ 10.253515] GDT-HA: Storage RAID Controller Driver. Version: 3.05
- [ 10.445711] Fusion MPT base driver 3.04.20
- [ 10.446907] Copyright (c) 1999-2008 LSI Corporation
- [ 10.451339] Fusion MPT SPI Host driver 3.04.20
- [ 10.454611] Fusion MPT FC Host driver 3.04.20
- [ 10.458062] Fusion MPT SAS Host driver 3.04.20
- [ 10.460738] 3ware Storage Controller device driver for Linux v1.26.02.003.
- [ 10.463636] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
- [ 10.470206] HP CISS Driver (v 3.6.26)
- [ 10.480236] Adaptec aacraid driver 1.2-1[41066]-ms
- [ 10.484903] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
- [ 10.486593] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
- [ 10.491002] megasas: 06.811.02.00-rc1
- [ 10.495784] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.38-k.
- [ 10.506770] Emulex LightPulse Fibre Channel SCSI driver 11.2.0.0.
- [ 10.507957] Copyright(c) 2004-2016 Emulex. All rights reserved.
- [ 10.513189] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
- [ 10.537407] uhci_hcd: USB Universal Host Controller Interface driver
- [ 10.540688] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 10.542181] ohci-pci: OHCI PCI platform driver
- [ 10.559610] usbcore: registered new interface driver usbhid
- [ 10.560959] usbhid: USB HID core driver
- [ 10.654301] md: raid0 personality registered for level 0
- [ 10.657613] md: raid1 personality registered for level 1
- [ 10.821928] raid6: sse2x1 gen() 8156 MB/s
- [ 10.991922] raid6: sse2x1 xor() 5861 MB/s
- [ 10.994917] scsi 6:0:0:0: Direct-Access General USB Flash Disk 1100 PQ: 0 ANSI: 4
- [ 11.161912] raid6: sse2x2 gen() 10248 MB/s
- [ 11.331909] raid6: sse2x2 xor() 7313 MB/s
- [ 11.501901] raid6: sse2x4 gen() 11822 MB/s
- [ 11.671898] raid6: sse2x4 xor() 8503 MB/s
- [ 11.673039] raid6: using algorithm sse2x4 gen() 11822 MB/s
- [ 11.674150] raid6: .... xor() 8503 MB/s, rmw enabled
- [ 11.675220] raid6: using ssse3x2 recovery algorithm
- [ 11.676509] async_tx: api initialized (async)
- [ 11.676546] sd 6:0:0:0: Attached scsi generic sg1 type 0
- [ 11.677989] sd 6:0:0:0: [sdb] 7831552 512-byte logical blocks: (4.01 GB/3.73 GiB)
- [ 11.679110] sd 6:0:0:0: [sdb] Write Protect is off
- [ 11.679112] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
- [ 11.680230] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 11.682405] xor: automatically using best checksumming function avx
- [ 11.684603] md: raid6 personality registered for level 6
- [ 11.685720] md: raid5 personality registered for level 5
- [ 11.686789] md: raid4 personality registered for level 4
- [ 11.697616] md: raid10 personality registered for level 10
- [ 11.700326] md: linear personality registered for level -1
- [ 11.703173] md: multipath personality registered for level -4
- [ 11.703510] sdb: sdb1 sdb2
- [ 11.709239] sd 6:0:0:0: [sdb] Attached SCSI removable disk
- [ 11.736485] RPC: Registered named UNIX socket transport module.
- [ 11.737730] RPC: Registered udp transport module.
- [ 11.738945] RPC: Registered tcp transport module.
- [ 11.740125] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 11.759007] fuse init (API version 7.26)
- [ 11.770130] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
- [ 11.771339] e1000: Copyright (c) 1999-2006 Intel Corporation.
- [ 11.778233] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
- [ 11.783002] sky2: driver version 1.30
- [ 11.818943] tulip: Linux Tulip driver version 1.1.15-NAPI (Feb 27, 2007)
- [ 11.826219] dca service started, version 1.12.1
- [ 11.828056] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k
- [ 11.829086] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
- [ 11.831914] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
- [ 11.832933] ixgb: Copyright (c) 1999-2008 Intel Corporation.
- [ 11.838294] Loading iSCSI transport class v2.0-870.
- [ 11.945395] device-mapper: multipath round-robin: version 1.2.0 loaded
- [ 23.756281] random: crng init done
- [ 39.083063] PM: Starting manual resume from disk
- [ 39.121046] EXT4-fs (dm-2): INFO: recovery required on readonly filesystem
- [ 39.122147] EXT4-fs (dm-2): write access will be enabled during recovery
- [ 39.157089] EXT4-fs (dm-2): recovery complete
- [ 39.180872] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
- [ 40.421320] udevd[2349]: starting version 3.1.5
- [ 40.616632] e1000e 0000:00:19.0 enp0s25: renamed from eth0
- [ 40.681533] brcmsmac bcma0:1 wlp36s0b1: renamed from wlan0
- [ 40.855440] kvm: disabled by bios
- [ 40.878485] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 41.011157] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 41.053558] lib80211: common routines for IEEE802.11 drivers
- [ 41.053560] lib80211_crypt: registered algorithm 'NULL'
- [ 41.076432] lib80211_crypt: registered algorithm 'TKIP'
- [ 41.640946] EXT4-fs (dm-2): re-mounted. Opts: errors=remount-ro,discard
- [ 41.764782] Adding 524284k swap on /dev/mapper/vg1-swap. Priority:-1 extents:1 across:524284k SS
- [ 41.823068] EXT4-fs (dm-3): mounting with "discard" option, but the device does not support discard
- [ 41.823070] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: discard
- [ 43.421650] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
- [ 43.421663] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
- [ 43.421853] IPv6: ADDRCONF(NETDEV_UP): wlp36s0b1: link is not ready
- [ 43.801243] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
- [ 44.711920] wlp36s0b1: authenticate with 38:10:d5:69:5a:e6
- [ 44.712829] wlp36s0b1: send auth to 38:10:d5:69:5a:e6 (try 1/3)
- [ 44.715780] wlp36s0b1: authenticated
- [ 44.721007] wlp36s0b1: associate with 38:10:d5:69:5a:e6 (try 1/3)
- [ 44.731837] wlp36s0b1: RX AssocResp from 38:10:d5:69:5a:e6 (capab=0x31 status=0 aid=2)
- [ 44.732393] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated
- [ 44.732396] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
- [ 44.732404] wlp36s0b1: associated
- [ 44.732442] IPv6: ADDRCONF(NETDEV_CHANGE): wlp36s0b1: link becomes ready
- [ 44.736259] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211: txop exceeded phylen 159/256 dur 1778/1504
- [ 44.749380] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211: txop exceeded phylen 137/256 dur 1602/1504
- [ 50.718927] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
- [ 530.444250] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211: txop exceeded phylen 153/256 dur 1730/1504
-