- $ sudo smartctl -a /dev/sda
- smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.8.11-gentoo+] (local build)
- Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Phison Driven SSDs
- Device Model: KINGSTON SKC310S37A960G
- Serial Number: 50026B7253094154
- Firmware Version: SAFM00.r
- User Capacity: 960,197,124,096 bytes [960 GB]
- Sector Size: 512 bytes logical/physical
- Rotation Rate: Solid State Device
- Form Factor: 2.5 inches
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ACS-2 (minor revision not indicated)
- SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Sun Feb 26 19:08:14 2017 CET
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 30) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 2) minutes.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
- 2 Not_In_Use 0x0005 100 100 050 Pre-fail Offline - 0
- 3 Not_In_Use 0x0007 100 100 050 Pre-fail Always - 0
- 5 Retired_Block_Count 0x0013 100 100 050 Pre-fail Always - 0
- 7 Not_In_Use 0x000b 100 100 050 Pre-fail Always - 0
- 8 Not_In_Use 0x0005 100 100 050 Pre-fail Offline - 0
- 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 7218
- 12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 587
- 168 SATA_Phy_Error_Count 0x0012 100 100 000 Old_age Always - 0
- 170 Bad_Blk_Ct_Erl/Lat 0x0003 100 100 010 Pre-fail Always - 0/3104
- 173 MaxAvgErase_Ct 0x0012 100 100 000 Old_age Always - 36 (Average 8)
- 175 Not_In_Use 0x0013 100 100 050 Pre-fail Always - 0
- 187 Reported_Uncorrect 0x0012 100 100 000 Old_age Always - 0
- 192 Unsafe_Shutdown_Count 0x0012 100 100 000 Old_age Always - 22
- 194 Temperature_Celsius 0x0023 072 059 030 Pre-fail Always - 28 (Min/Max 15/41)
- 196 Not_In_Use 0x0002 100 100 010 Old_age Always - 0
- 197 Not_In_Use 0x0032 100 100 000 Old_age Always - 0
- 199 CRC_Error_Count 0x000b 100 100 050 Pre-fail Always - 0
- 218 CRC_Error_Count 0x000b 100 100 050 Pre-fail Always - 0
- 231 SSD_Life_Left 0x0013 100 100 000 Pre-fail Always - 100
- 233 Flash_Writes_GiB 0x000b 100 100 000 Pre-fail Always - 9063
- 240 Not_In_Use 0x0013 100 100 000 Pre-fail Always - 0
- 241 Lifetime_Writes_GiB 0x0012 100 100 000 Old_age Always - 6533
- 242 Lifetime_Reads_GiB 0x0012 100 100 000 Old_age Always - 8299
- 244 Average_Erase_Count 0x0002 100 100 000 Old_age Always - 8
- 245 Max_Erase_Count 0x0002 100 100 000 Old_age Always - 36
- 246 Total_Erase_Count 0x0012 100 100 000 Old_age Always - 2335616
- SMART Error Log Version: 1
- No Errors Logged
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 7218 -
- # 2 Short offline Completed without error 00% 52 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.